View
View
View
View
| Model No | CNT-4921-RPAF |
| Display | Numerical display: 6 digits, segment LED, character height 14.2mm |
| Type of Product | Digital Panel Meter |
| Function | Scaling: Set the display value per pulse using 6 digits and the decimal point position. * Set in program mode |
Model No |
CNT-4921-RPAF |
Display |
Numerical display: 6 digits, segment LED, character height 14.2mm |
Type of Product |
Digital Panel Meter |
Function |
Scaling: Set the display value per pulse using 6 digits and the decimal point position. * Set in program mode |
Country of Origin |
Japan |
Input Method |
Single phase/two phase signal |
Storage Temperature Range |
-20 to +70 ℃ |
Monotaro ID |
66273055 |
Import Country |
Direct Import from Japan |
Operation Mode |
Comparator output: Isolated non-contact output (photoMOS relay) |
Rating |
Comparator output: DC350V 80mA max (resistive load) AC240V 80mA max (resistive load) |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Input Power |
AC 100-240 V |
Specifications |
●RS-485 communication section / Number of connections: 32 (max)●RS-485 communication section / Communication format, communication method, communication standard, communication speed, communication code, communication connector: Multi-drop serial communication, start-stop synchronization, RS-485, 9600 bps/19200 bps (set in program mode), ASCII, Terminal block: 7.62 mm pitch M3 free terminal screws●Analog: ±10 V●Analog output / Output items: Accumulated output●Analog output / Load resistance / Output accuracy: Voltage output: 4.7 kΩ or more, Current output: 560 Ω or less, Voltage output: ±0.05% full scale or less @ 23°C, Current output: ±0.2% full scale or less @ 23°C●Analog output section / Shipping update time, output rate, temperature coefficient, reality, Output connector: 0.5 ms (maximum delay from pulse input to analog output: 0.7 ms), Display value setting at arbitrary full scale (set in program mode), ±200 ppm/ °C or less, ±0.1% or less, terminal block, 7.62mm pitch, M3, free terminal screws. Comparator output: ON resistance, response time, output connector: 50Ω or less, 3ms (max), terminal block, 7.62mm pitch, M3, free terminal. Comparator output: Number of outputs, number of setting digits, polarity setting: 2 points (HIGH, LOW), 6 digits (HIGH, LOW), 0=+, 1=- (Set in program mode). Update time (ms): 0.5. Maximum number of pulse inputs: ±2 47 - 1 (±47 bits). Internal counting stops when the maximum pulse count is reached (not related to the displayed count). Setting value storage: Non-volatile memory. Input connector terminal block: terminal block, 7.62mm pitch, M3, free terminal screws. Input signal/input circuit/input withstand voltage: logic signal, +5V pull-up at approximately 5kΩ, +30V/-25V. Display rate: Set the display value for one pulse. 0.000000001 to 999999 *Set in program mode ●Display update time/display accuracy: 20 ms/5 ppm ±1 digit @ 23°C ●Display range/polarity indication/over display/zero display: -199999 to 999999/- (-) lights up when -/up to ±1999999, the display will double to indicate more than the number of digits/OL display/leading zero suppression |
Operating Temperature / Humidity Range |
0℃ to +40℃/85%RH or less (no condensation) |
Tip Shape |
Input: Input from rear terminal (short circuit with GND terminal) Input with L level width of 2ms or more |
Power Consumption (VA) |
8 or less |
Atmosphere |
Surrounding area: No corrosive gases |
Pattern Setting |
Comparator output: Set in program mode, push switch |
BCD Output |
Open collector |
3 options, 3 price levels
Volume discounts
Price locked 30 days