View
View
View
View
| Model No | PSV-2401U1D3-C2SD2 |
| Display | Numerical display / 5 digits: 7-segment LED character height 9mm, red LED, display range / -19999 to 99999, polarity display / - lights up when rotating in reverse, over display / OL, zero display / leading zero suppression, display update time / 0.3 seconds (can be set in the range of 0.1 to 9.9 seconds), display accuracy / 20 ppm ± 1 digit at 23°C |
| Type of Product | Digital Panel Meter |
| Function | Low cut: Voltage below the set value is judged as 0 |
Model No |
PSV-2401U1D3-C2SD2 |
Display |
Numerical display / 5 digits: 7-segment LED character height 9mm, red LED, display range / -19999 to 99999, polarity display / - lights up when rotating in reverse, over display / OL, zero display / leading zero suppression, display update time / 0.3 seconds (can be set in the range of 0.1 to 9.9 seconds), display accuracy / 20 ppm ± 1 digit at 23°C |
Type of Product |
Digital Panel Meter |
Function |
Low cut: Voltage below the set value is judged as 0 |
Country of Origin |
Japan |
Monotaro ID |
66272170 |
Import Country |
Direct Import from Japan |
Input Signal |
1point |
Measurement accuracy |
±0.1%FS+1digit |
Measurement Range |
±1 V |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Input Power |
DC 12-30 V |
Specifications |
●Isolation: Power supply/voltage input/other inputs●Analog: None●Oversampling: Fixed at 250 kHz●Comparator/Output type: Isolated non-contact output (photoMOS relay), no polarity. When the comparator operating condition is ON, the resistance between COMP and COM is 50 Ω or less.●Comparator/Output load voltage, output logic, update time: Peak AC/DC 280 V 100 mA (resistive load). ON resistance is 50 Ω or less maximum. Comparison is performed with polarity (0 is greater than negative). Depends on the analog output update time setting. Response time is 1 ms (max).●Digital: None●Calculation unit/moving average number: 1999/01/01●Update time (ms): 1●Setting value storage: Non-volatile memory (EEPROM)●Input low-pass filter: Cut-off frequency 1 kHz |
Power Consumption (W) |
3 or less |
Operating Temperature / Humidity Range |
-10℃ to +50℃ 35 to 85%RH (non-condensing) |
Tip Shape |
Input backup: Shift and set operation value backup enable/disable setting (value can be retained even when power is turned off), response operation can be set (1ms to 1999ms) |
Output update time |
40ms - 9999.9ms Settable in 1ms increments |
Comparator |
2 points |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
USB |
Communication specifications: USB 2.0 (USB virtual COM serial port communication 230.4 kbps) |
Looking for bulk pricing or different specifications?