Ships within 19 days
View
View
View
View
| Type of Product | Speedometer |
| Country of Origin | Japan |
| Name of Manufacturer/Packer/Importer | COCO RESEARCH |
| Model No | TDP-4921-EDF |
Type of Product |
Speedometer |
Country of Origin |
Japan |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Model No |
TDP-4921-EDF |
Monotaro ID |
66272827 |
Input Method |
Single-phase/two-phase signal, 1- Single-phase signal trigger direction, falling edge 2- UP/DOWN signal trigger direction, falling edge 3- A/B phase signal trigger direction, falling edge/rising edge 4- Direction signal speed input trigger direction, falling edge direction input trigger direction, falling edge/rising edge set in program mode |
Storage Temperature Range |
-20 to +70 ℃ |
Operation Mode |
Comparator output: Isolated non-contact output (photoMOS relay) |
Input Power |
DC 9.6-30 V |
Measurement Resolution |
26 ns |
Number of Input Points |
1point |
Function |
Scaling: Latematic™ |
Specifications |
Analog: 0-10V; Comparator output/ON resistance, update time, output hold function, response time, output connector: 50Ω or less; Display update time/Selectable by synchronizing with analog output update time; Comparator reset function; 3ms (max); Terminal block 7.62mm pitch M3 free terminal; Comparator output section/Number of outputs, number of setting digits, polarity setting: 2 points (HIGH, LOW) or 6 digits (HIGH, LOW); 0=+, 1=- (Set in program mode); Sensor power output: +12V±10%, 150mA max; Dynamic prediction™: 9 levels (including continuous prediction and period hold); Update time (ms): 0.5; Setting value storage: Non-volatile memory (EEPROM); Measurement mode/Calculation rate: Frequency meter mode/Period meter mode/Set the display value for the input frequency. Input frequency rate: 0.00001 - 999999 (Hz); Display rate 0.00001 - 999999 ●Input connector terminal block: 7.62mm pitch M3 free terminal screws ●Input pulse width: H and L levels 100 ns or more ●Input signal/input circuit/input withstand voltage: Logic signal/approx. 5kΩ, +5V pull-up/+30V/-25V ●Input withstand voltage/input connector: ±30V/terminal block 7.62mm pitch M3 free terminal screws ●Display update time/display accuracy: 0.1 to 99.9 seconds (can be set in 0.1 second increments in program mode)/5 ppm ±1 digit @ 23°C ●Display range/polarity indication/overcurrent indication/zero indication: -199999 to 999999/"-" lights up when rotating in reverse/OL indication/leading zero suppression |
Operating Temperature / Humidity Range |
0℃ to +40℃/85%RH or less (no condensation) |
Tip Shape |
Input: Input from rear terminal (short circuit with GND terminal) |
Input Signal |
1. Logic input Input level: H level 4V or more, L level 1V or less 2. Zero cross input AC signal with input sensitivity of ±40mV or more |
Power Consumption (VA) |
8 or less |
Atmosphere |
Surrounding area: No corrosive gases |
Import Country |
Direct Import from Japan |
Display |
Numerical display/6 digits: 7-segment LED, character height 14.2mm |
Rating |
Comparator output: DC350V 80mA max (resistive load) AC240V 80mA max (resistive load) |
Pattern Setting |
Comparator output: Set in program mode, push switch |
Input Frequency (Hz) |
0.0006 to 4M (single phase signal) / 0.0006 to 1M (A/B phase signal) |
Looking for bulk pricing or different specifications?
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
