Ships within 19 days
View
View
View
View
| Type of Product | Speedometer |
| Country of Origin | Japan |
| Name of Manufacturer/Packer/Importer | COCO RESEARCH |
| Model No | SPD-HD-WH-S06J1 |
Type of Product |
Speedometer |
Country of Origin |
Japan |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Model No |
SPD-HD-WH-S06J1 |
Monotaro ID |
66272809 |
Input Method |
A/B phase, single phase signal 2 phase signal (direction signal, UP/DOWN signal) |
Number of Input Points |
1point |
Function |
Low cut: Stop detection occurs when the speed is below the set value |
Specifications |
●2-phase (AB phase) input type / Sensor power output: Option [H] DC +12V ±5%, 60mA max / [L] DC +5V ±5%, 150mA max ●2-phase (AB phase) input type / Trigger edge: Falling edge ●2-phase (AB phase) input type / Input connector: Retractable BNC (single-phase input/analog output), screw terminal plug connector (2 sensor power points, input signal, analog output), M8 connector (1 sensor power point, input signal, analog output) ●2-phase (AB phase) input type / Input pulse, input resistance, input withstand voltage: 0.2μs or more, both H and L levels, 10kΩ, ±30V ●2-phase (AB phase) input type / Input low-pass filter: OFF, 500Hz, 5kHz, 120kHz, 800kHz ● Ethernet communication / LED display, Link/Activity display: 100BASE-TX/10BASE-T, full-duplex/half-duplex (SSL/TLS and SSH (Telnet cannot be used on encrypted networks such as those described above.) ● Ethernet communication/interface: 100BASE-TX/10BASE-T (auto-sensing) Transmission speed standard: Category 5/Category 4 ● Ethernet communication/connector shape: RJ-45 (network interface) Lantronix Xport ● Ethernet communication/output update time/transmission communication compatibility: Conforms to USB communication 1-9999 ms/DIX Ethernet Version 2.0 IEEE 802.3 ● Ethernet communication/communication specifications: Protocol TCP/IP method Telnet communication connection ● Isolation: Power/other input/output ● Dynamic prediction™: 8 levels (including continuous prediction and stop prediction) ● Digital communication: Ethernet ● Calculation rate: Set the reference pulse number, reference change amount, and speed unit time for the input frequency ● Update time (m): 1 ● Output moving average: 1999/01/01 ● Division ratio: 1-60000 |
Operating Temperature / Humidity Range |
-10℃ to +50℃ 35 to 85%RH (non-condensing) |
Input Signal |
Input isolation, 5V logic, zero cross, NPN open collector, 12V logic, input customization signal |
Import Country |
Direct Import from Japan |
Display |
Numerical display: 16 characters, 2 lines, character height 6mm, Display range / A/B phase: ±999999, Display update time / 0.3 seconds (can be set in the range of 0.1 to 9.9 seconds), Display accuracy / Within 20 ppm ±1 count, Display update time / 0.1 to 9.9 seconds (can be set in 0.1 second increments), Power ON/OFF display / LED, Built-in power switch, Decimal point position / Set in program mode / Number of digits 0 to 5 |
Input Frequency (Hz) |
0.0006 - 1.0M |
Input Connector |
BNCX2 |
Withstand voltage (V) |
Power supply/other input/output between each terminal DC500 for 1 minute |
Power Supply |
Dry battery/AC adapter |
Output update time |
1ms - 9999.9ms Settable in 0.1ms increments |
Power Consumption (W) |
3 or less |
Resolution |
Input: Approx. 10.4ns (96MHz) |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
Measurement Modes |
Speedometer / Frequency meter / Period meter (second unit only) / Totalizer [switchable] |
USB |
Communication specifications: USB 2.0 (USB virtual COM serial port communication 230.4 kbps) |
Looking for bulk pricing or different specifications?
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
