Ships within 19 days
View
View
View
View
| Type of Product | Speedometer |
| Country of Origin | Japan |
| Name of Manufacturer/Packer/Importer | COCO RESEARCH |
| Model No | SPD-HD-N-E5S01J2 |
Type of Product |
Speedometer |
Country of Origin |
Japan |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Model No |
SPD-HD-N-E5S01J2 |
Monotaro ID |
66272940 |
Input Method |
Single phase, single phase signal, two phase signal (direction signal, UP/DOWN signal) |
Number of Input Points |
1point |
Function |
Low cut: Stop detection occurs when the speed is below the set value |
Specifications |
●CAN communication mechanism, Setting items, Output update time: Writing and reading of setting values/Continuous output of measured values, CAN transmission ID, CAN reception ID, Settable from 0.1 ms to 9999.9 ms in 1 ms increments●CAN communication specifications: CAN2.0B 10 k / 20 k / 50 k / 100 k / 250 k / 500 k / 1 Mbps format (INTEL/MOTOROLA), Frame (11 bit/29 bit)●Isolation: Power supply/other input/output●Analog output/Output scaling: Full scale and zero scale settings allow for arbitrary scaling●Analog output/Output update time, Output response time: 1 ms to 9999 ms in 1 ms increments, 0-90% response time: Less than 1 ms●Analog output/Output accuracy, Temperature fluctuation: Voltage output to ±0.1% of full scale at 23°C, current output to ±0.1% of full scale at 23°C / ±200 ppm/°C ● Analog output/input/output delay time: Output update time + analog rise time 150 μs or less ● Dynamic prediction TM: 8 levels (including continuous prediction and stop prediction) ● Digital communication: CAN communication ● Calculation rate: Set the reference pulse number, reference change amount, and speed unit time for the input frequency ● Update time (m): 1 ● Output moving average: 1999/01/01 ● Division ratio: 1 to 60000 |
Operating Temperature / Humidity Range |
-10℃ to +50℃ 35 to 85%RH (non-condensing) |
Input Signal |
Input isolation, 5V logic, zero cross, NPN open collector, 12V logic, input customization signal |
Import Country |
Direct Import from Japan |
Display |
Numerical display: 16 characters, 2 lines, character height 6mm, Display range/Single phase 0.00000 - 999999, Display update time/0.3 seconds (can be set in the range of 0.1 - 9.9 seconds), Display accuracy/Within 20 ppm ±1 count, Display update time/0.1 - 9.9 seconds (can be set in 0.1 second increments), Power ON/OFF display/LED Built-in power switch, Decimal point position/Set in program mode/Number of digits 0 - 5 |
Input Frequency (Hz) |
0.0006 - 1.0M |
Input Connector |
BNCX2 |
Withstand voltage (V) |
Power supply/other input/output between each terminal DC500 for 1 minute |
Load Resistance |
Analog output: Voltage output -4.7 KΩ or more, current output -300Ω or less |
Power Supply |
Dry battery/AC adapter |
Output update time |
1ms - 9999.9ms Settable in 0.1ms increments |
Power Consumption (W) |
3 or less |
Resolution |
Analog output: 16-bit (over 50,000), input: approx. 10.4 ns (96 MHz) |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
Measurement Modes |
Speedometer / Frequency meter / Period meter (second unit only) / Totalizer [switchable] |
USB |
Communication specifications: USB 2.0 (USB virtual COM serial port communication 230.4 kbps) |
Analog Output |
0-5 V |
Looking for bulk pricing or different specifications?
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
