Ships within 19 days
View
View
View
View
| Type of Product | Speedometer |
| Country of Origin | Japan |
| Name of Manufacturer/Packer/Importer | COCO RESEARCH |
| Model No | TDP-4921-ESDF |
Type of Product |
Speedometer |
Country of Origin |
Japan |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Model No |
TDP-4921-ESDF |
Monotaro ID |
66273037 |
Input Method |
Single-phase/two-phase signal, 1- Single-phase signal trigger direction, falling edge 2- UP/DOWN signal trigger direction, falling edge 3- A/B phase signal trigger direction, falling edge/rising edge 4- Direction signal speed input trigger direction, falling edge direction input trigger direction, falling edge/rising edge set in program mode |
Storage Temperature Range |
-20 to +70 ℃ |
Operation Mode |
Comparator output: Isolated non-contact output (photoMOS relay) |
Input Power |
DC 9.6-30 V |
Measurement Resolution |
26 ns |
Number of Input Points |
1point |
Function |
Scaling: Latematic™ |
Specifications |
●RS-485 communication section / Number of connections: 32 (max)●RS-485 communication section / Communication format, communication method, communication standard, communication speed, communication code, communication connector: 2-wire multi-drop serial communication, start-stop synchronization, RS-485, 9600 bps/19200 bps (set in program mode), ASCII, terminal block, 7.62 mm pitch, M3 free terminal screw●Analog: 0-10 V●Comparator output / ON resistance, update time, output hold function, response time, output connector: 50 Ω or less, selectable from display update time/analog output update time synchronization, comparator reset function, 3 ms (max), terminal block, 7.62 mm pitch, M3 free terminal●Comparator output section / Number of outputs, number of setting digits, polarity setting: 2 points (HIGH, LOW), 6 digits (HIGH, LOW), 0 = +, 1 = - *Set in program mode●Sensor power output: +12 V ±10% 150mA max. ● Dynamic Prediction™: 9 levels (including continuous prediction and period hold) ● Digital communication: RS485 ● Update time (ms): 0.5 ● Setting value storage: Non-volatile memory (EEPROM) ● Measurement mode/calculation rate: Frequency meter mode/Period meter mode/Sets the display value relative to the input frequency. Input frequency rate: 0.00001 - 999999 (Hz)/Display rate 0.00001 - 999999 ● Input connector terminal block: 7.62mm pitch M3 free terminal screw ● Input pulse width: H and L levels 100ns or more ● Input signal/input circuit/input withstand voltage: Logic signal/+5V pull-up at approximately 5kΩ/+30V/-25V ● Input withstand voltage/input connector: ±30V/terminal block 7.62mm pitch M3 free terminal screw ● Display update time/display accuracy: 0.1 to 99.9s (0.1s in program mode) (Can be set in units) / 5 ppm ± 1 digit @ 23°C ● Display range / Polarity display / Over display / Zero display: -199999 to 999999 / When rotating in reverse, "-" lights up / OL display / Leading zero suppression |
Operating Temperature / Humidity Range |
0℃ to +40℃/85%RH or less (no condensation) |
Tip Shape |
Input: Input from rear terminal (short circuit with GND terminal) |
Input Signal |
1. Logic input Input level: H level 4V or more, L level 1V or less 2. Zero cross input AC signal with input sensitivity of ±40mV or more |
Power Consumption (VA) |
8 or less |
Atmosphere |
Surrounding area: No corrosive gases |
Import Country |
Direct Import from Japan |
Display |
Numerical display/6 digits: 7-segment LED, character height 14.2mm |
Rating |
Comparator output: DC350V 80mA max (resistive load) AC240V 80mA max (resistive load) |
Pattern Setting |
Comparator output: Set in program mode |
Input Frequency (Hz) |
0.0006 to 4M (single phase signal) / 0.0006 to 1M (A/B phase signal) |
Looking for bulk pricing or different specifications?
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
