Ships within 19 days
View
View
View
View
| Type of Product | Speedometer |
| Country of Origin | Japan |
| Name of Manufacturer/Packer/Importer | COCO RESEARCH |
| Model No | SPD-HD-N-E1S06J1 |
Type of Product |
Speedometer |
Country of Origin |
Japan |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Model No |
SPD-HD-N-E1S06J1 |
Monotaro ID |
66273019 |
Input Method |
Single phase, single phase signal, two phase signal (direction signal, UP/DOWN signal) |
Number of Input Points |
1point |
Function |
Low cut: Stop detection occurs when the speed is below the set value |
Specifications |
●Ethernet communication/LED display, Link/Activity display: 100BASE-TX/10BASE-T, full-duplex/half-duplex (Telnet is not available for communication networks encrypted with SSL/TLS or SSH, etc.) ●Ethernet communication/Interface: 100BASE-TX/10BASE-T (auto-sensing), transmission speed standard: Category 5/Category 4 ●Ethernet communication/Connector shape: RJ-45 (network interface), Lantronix Xport ●Ethernet communication/Output update time/Transmission communication compatibility: Conforms to USB communication, 1 to 9999 ms, DIX Ethernet Version 2.0 IEEE 802.3 ●Ethernet communication/Communication specifications: Protocol TCP/IP method, Telnet communication connection ●Isolation: Power supply/other input/output ●Analog output/Output scaling: Full scale, zero scale setting allows arbitrary scaling ●Analog output/Output update time/Output response time: 1 ms to 9999 ms, settable in 1 ms increments, 1 ms or less 0-90% response●Analog output/output accuracy and temperature fluctuation: Voltage output to ±0.1% of FS@23°C, current output to ±0.1% of FS@23°C / ±200 ppm/°C or less●Analog output/input/output delay time: Output update time + analog rise time 150 μs or less●Dynamic prediction™: 8 levels (including continuous prediction and stop prediction)●Digital communication: Ethernet●Calculation rate: Set the reference pulse number, reference change amount, and speed unit time for the input frequency●Update time (m): 1●Output moving average: 1999/01/01●Division ratio: 1 to 60,000 |
Operating Temperature / Humidity Range |
-10℃ to +50℃ 35 to 85%RH (non-condensing) |
Input Signal |
Input isolation, 5V logic, zero cross, NPN open collector, 12V logic, input customization signal |
Import Country |
Direct Import from Japan |
Display |
Numerical display: 16 characters, 2 lines, character height 6mm, Display range/Single phase 0.00000 - 999999, Display update time/0.3 seconds (can be set in the range of 0.1 - 9.9 seconds), Display accuracy/Within 20 ppm ±1 count, Display update time/0.1 - 9.9 seconds (can be set in 0.1 second increments), Power ON/OFF display/LED Built-in power switch, Decimal point position/Set in program mode/Number of digits 0 - 5 |
Input Frequency (Hz) |
0.0006 - 1.0M |
Input Connector |
BNCX2 |
Withstand voltage (V) |
Power supply/other input/output between each terminal DC500 for 1 minute |
Load Resistance |
Analog output: Voltage output -4.7 KΩ or more, current output -300Ω or less |
Power Supply |
Dry battery/AC adapter |
Output update time |
1ms - 9999.9ms Settable in 0.1ms increments |
Power Consumption (W) |
3 or less |
Resolution |
Analog output: 16-bit (over 50,000), input: approx. 10.4 ns (96 MHz) |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
Measurement Modes |
Speedometer / Frequency meter / Period meter (second unit only) / Totalizer [switchable] |
USB |
Communication specifications: USB 2.0 (USB virtual COM serial port communication 230.4 kbps) |
Analog Output |
0-10 V |
Looking for bulk pricing or different specifications?
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
