• Home /
• Testing and Measuring Instruments /
• Dimension Measurement /
• Mitutoyo Japan Mesuring Instruments

Have a question? Call us now at +91 9650660070

Mitutoyo Japan Mesuring Instruments

Showing 40 out of 79 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 25 days

Mitutoyo Vernier caliper clamp screw 6143995 - Made In Japan

By Mitutoyo

₹624  

When you're using vernier calipers, it's critical to know exactly where the jaws are in relation to the object being measured. One way to do this is with a clamp screw, which allows you to finely control the exact position of the jaws for more accurate measurements. Not only does this feature help you avoid making mistakes that could be costly or cause injury, but it also gives you peace of mind when you're having to make very fast, very small measurements. The lock screw on a caliper is always threaded so that when it's tightened, it clamps down on the jaws of the calipers and holds them in place. The jaw is held securely in its new position until you loosen the screw and slide it back into its initial position. This allows you to take multiple measurements at different points along a part, confident that your readings will be accurate because the jaws won't move while you're working. A clamp screw is an essential part of any vernier caliper set. It's an invaluable tool that lets you choose whether you want your calipers to stay fixed in place or if they should freely slide back and forth through their entire range of motion so that they can be placed wherever necessary for a given measurement. The lock screw is used to fix the position of the jaws once the object being measured is positioned properly so that readings can be taken without the fear of spoiling the position. This allows for very high speed reading, which then allows for higher production rates in industrial environments.This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Pocket Type Test Indicator Replacement Stylus

By Mitutoyo

₹601 - ₹754

The Mitutoyo Pocket Type Test Indicator Replacement Stylus is a high-quality accessory designed to restore and maintain the functionality of your test indicator. Built to Mitutoyo’s exacting standards, this replacement stylus ensures precise measurements and reliable performance for various testing and inspection tasks. Crafted from durable materials, the stylus offers long-lasting performance even in demanding environments. Its fine tip ensures accurate contact with surfaces, making it ideal for precise dimensional measurements and surface inspections. The replacement stylus is compatible with Mitutoyo pocket-type test indicators, ensuring a perfect fit and seamless integration. This stylus is engineered for ease of installation, allowing users to quickly replace worn or damaged components without specialized tools. Its robust construction ensures consistent results, helping maintain the integrity of your test indicator's measurements. Whether you’re working in manufacturing, quality control, or a workshop setting, the Mitutoyo Pocket Type Test Indicator Replacement Stylus is an essential spare part to keep your equipment functioning optimally. It reflects Mitutoyo’s commitment to precision and durability, making it a reliable choice for professionals who demand high performance from their measurement tools.

Material : Carbide

Type of Product : Pocket Type Test Indicator Replacement Stylus

Application : Measurement and testing

Dimension D (Φmm) : 1 Φmm

Color : Silver

Import Country : Direct Import from Japan

Explore other Variants (6)

Ships within 19 days

Mitutoyo Micrometer parts ratchet 6145921 - Made In Japan

By Mitutoyo

₹1,651  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Stylus Sph-71 354884, SPH-71

By Mitutoyo

₹27,139  

Introducing the Mitutoyo Stylus Sph-71 (354884), a high-precision measuring stylus designed to elevate your coordinate measuring machine (CMM) capabilities to new heights. Crafted with Mitutoyo's renowned precision engineering, this innovative stylus is an essential accessory for professionals in various industries that demand precise and reliable measurements. The Mitutoyo Stylus Sph-71 (354884) is engineered with a focus on durability and performance. Its robust construction ensures longevity, making it suitable for use in challenging industrial environments. The stylus is crafted with meticulous attention to detail, guaranteeing optimal performance and repeatability in every measurement. This stylus is equipped with a spherical tip, designed to provide excellent probing versatility. Whether you're measuring complex geometries, tight tolerances, or delicate surfaces, the Mitutoyo Stylus Sph-71 (354884) delivers accurate and consistent results with ease. Compatibility is a key feature of this stylus. Designed to fit a wide range of Mitutoyo CMMs and probing systems, it seamlessly integrates with your existing equipment, saving you time and effort in setup and calibration. Mitutoyo's commitment to precision is evident in every aspect of the Stylus Sph-71 (354884). The precisely ground spherical tip ensures accurate and reliable probing, enabling you to obtain high-quality measurement data for informed decision-making. Ease of use is a priority in the design of this stylus. Its user-friendly interface and straightforward installation process make it accessible to professionals of all skill levels. Whether you're a seasoned metrology expert or a novice in CMM operations, you can use this stylus effectively right from the start.

Add to Cart Buy Now

Ships within 25 days

Mitutoyo Replacement Stylus for Test Indicator

By Mitutoyo

₹754 - ₹2,477

The Mitutoyo Replacement Stylus for Test Indicator is a high-quality, precision component designed for use with Mitutoyo test indicators. The stylus is an essential part of the test indicator, responsible for making contact with the object being measured and providing accurate readings. This replacement stylus is made from durable materials, typically hardened steel or carbide, ensuring longevity and consistent performance in demanding measurement environments. The Mitutoyo Replacement Stylus is precision-engineered to maintain the accuracy and reliability of the test indicator, ensuring that measurements are precise and repeatable. It is designed to fit a variety of Mitutoyo test indicators, making it a versatile choice for users in fields like mechanical engineering, quality control, and manufacturing. The stylus is easy to replace, allowing for minimal downtime and continued operation of your test indicator. With the Mitutoyo Replacement Stylus, you can maintain the functionality of your test indicator, whether for machinery alignment, flatness measurement, or dimensional checks. The replacement ensures that the tip of the stylus remains in optimal condition for accurate contact and precise readings, preventing measurement errors caused by wear or damage to the original stylus. This makes it an essential accessory for keeping your Mitutoyo test indicator in top working condition.

Type of Product : Replacement Stylus for Test Indicator

RoHS Directive : Correspondence

Import Country : Direct Import from Japan

Explore other Variants (12)

Flash Deal

Ships within 24 hrs

Mitutoyo Meter 86906635 - Made In Japan

By Mitutoyo

₹3,186  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial Gauge Flat Probe 5707642 - Made In Japan

By Mitutoyo

₹4,955  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial Gauge Flat Probe 5707633 - Made In Japan

By Mitutoyo

₹3,775  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial gauge 5707597 - Made In Japan

By Mitutoyo

₹2,477  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial gauge Ball point gauge 5707581 - Made In Japan

By Mitutoyo

₹2,477  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial gauge Shell gauge 5707545 - Made In Japan

By Mitutoyo

₹1,769  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Connection Cord 3402402 - Made In Japan

By Mitutoyo

₹4,601  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo ABS Digimatic Point Caliper NT Series 3347041 - Made In Japan

By Mitutoyo

₹24,779  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo 1997186 - Application Measuring Instrument 1018 mm

By Mitutoyo

₹38,939  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo 0～25 mm Measuring Range Depth Gauge 1995612 - Made In Japan

By Mitutoyo

₹21,239  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo 0～200 mm Measuring Range Height Gauge 1992916 - Made In Japan

By Mitutoyo

₹44,839  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Recording Paper for SJ-400 6721215 - Made In Japan

By Mitutoyo

₹3,893  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial gauge Roller probe 5707843 - Made In Japan

By Mitutoyo

₹6,843  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial Gauge Lever Stylus 5707834 - Made In Japan

By Mitutoyo

₹2,713  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Hold Unit 6701861 - Made In Japan

By Mitutoyo

₹2,359  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo With back cover ear metal for dial gauge 6580646 - Made In Japan

By Mitutoyo

₹896  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Recording Paper for DP-1VR 6382905 - Made In Japan

By Mitutoyo

₹17,699  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Cylinder gauge parts sub-anvil 6147967 - Made In Japan

By Mitutoyo

₹2,359  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Cylinder gauge parts clamp holder assembly 6147233 - Made In Japan

By Mitutoyo

₹1,297  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Test Indicator Clamp with Dovetail 5708385 - Made In Japan

By Mitutoyo

₹2,123  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Clamp for Test Indicator with Dovetail Groove 5708376 - Made In Japan

By Mitutoyo

₹2,123  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Replacement Stylus for Pocket Type Test Indicator

By Mitutoyo

₹884 - ₹1,297

The Mitutoyo Replacement Stylus for Pocket Type Test Indicator is a precision accessory designed to replace the stylus on Mitutoyo's pocket-type test indicators. This replacement part ensures that your test indicator continues to perform with the same high level of accuracy, even after extended use or wear. Key Features: Precision Engineering: The replacement stylus is made with high-quality materials to ensure accurate, reliable readings, which is essential for precision measuring applications. Compatibility: Specifically designed to fit Mitutoyo pocket-type test indicators, this stylus offers a perfect fit and ensures the continued functionality of the instrument. Durability: Constructed from durable materials that can withstand regular use, the replacement stylus is built to last and maintain consistent performance over time. Easy to Replace: The stylus can be easily replaced without needing specialized tools, allowing for quick and convenient maintenance of your test indicator. Versatility: Suitable for a wide range of measuring tasks in industries like machining, quality control, and precision engineering, where detailed measurement is crucial. Applications: The Mitutoyo Replacement Stylus is ideal for use in precision measurement tasks such as checking flatness, roundness, or alignment of components. It's especially useful in environments where test indicators are used frequently for quick and accurate measurements, including mechanical engineering, manufacturing, and assembly processes. By replacing a worn-out stylus, users can restore their test indicator to optimal performance, ensuring ongoing accuracy in their measurements.

Material : Carbide

Type of Product : Replacement Stylus for Pocket Type Test Indicator

Dimension D (Φmm) : 2 Φmm

RoHS Directive : Correspondence

Name of Manufacturer/Packer/Importer : Mitutoyo Corporation

Explore other Variants (7)

Ships within 19 days

Mitutoyo Replacement Stylus for Test Indicator 5708184 - Made In Japan

By Mitutoyo

₹1,297  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Dial gauge stand 35718496 - Made In Japan

By Mitutoyo

₹66,079  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Foot Switch, 937179T - Made In Japan

By Mitutoyo

₹6,017  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Height Gauge Adapter 19242545 - Made In Japan

By Mitutoyo

₹8,967  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Depth attachment 19242073 - Made In Japan

By Mitutoyo

₹6,489  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Standard stylus 19241775 - Made In Japan

By Mitutoyo

₹33,039  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Standard detector 19241748 - Made In Japan

By Mitutoyo

₹76,699  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Conical stylus (Carbide / 12AAE867) 19241723 - Made In Japan

By Mitutoyo

₹27,139  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Mini Magnetic Stand 12122766 - Made In Japan

By Mitutoyo

₹8,141  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Back lid for dial gauge 10121614 - Made In Japan

By Mitutoyo

₹896  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Input tool RS-232C communication conversion Type 86892066 - Made In Japan

By Mitutoyo

₹33,039  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo U-WAVE-R (data receiving side) 86891971 - Made In Japan

By Mitutoyo

₹55,459  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Ships within 19 days

Mitutoyo Cylinder gauge parts anvil 60999233 - Made In Japan

By Mitutoyo

₹1,073  

This is a made in Japan product, imported directly from Japan.
Lead Time for Shiping will be 7-10 working Days

Add to Cart Buy Now

Previous Next

Page 1 of 2 results