• Home /
• Tooling and Cutting /
• Inserts /
• Turning Inserts

Have a question? Call us now at +91 9650660070

Turning Inserts

Showing 40 out of 1197 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

GENERIC Turning Inserts -T Grade THM, TNMG

By GENERIC

Pack of 10 piece

₹719 - ₹1,887

GENERIC Turning Inserts -T Grade THM, TNMG is a modern lighting solution designed to provide efficient illumination with a clean and professional finish. Developed by GENERIC, this product is engineered to deliver consistent light output while supporting energy-efficient performance. Its thoughtfully designed structure ensures uniform brightness, visual comfort, and suitability for a wide range of residential, commercial, and retail lighting applications. Built for durability and long-term use, GENERIC Turning Inserts -T Grade THM, TNMG offers reliable operation with minimal maintenance requirements. The product complements contemporary interiors and helps enhance overall ambience while reducing power consumption. Backed by the quality standards of GENERIC, it is a dependable choice for users seeking performance, longevity, and cost-effective lighting solutions.

Grade : THM

Application : Industrial

Type of Product : Turning Inserts -T

Series : TNMG

Explore other Variants (6)

Ships within 24 hrs

ISCAR Turning Insert CCMT 060208 SM Grade IC907

By ISCAR

Pack of 10 piece

₹4,837  

Features:
Single-sided turning inserts for semi finishing and finishing.
Chip breaking in moderate feed range. Positive rake, low cutting forces.
Tough Sub-Micron Substrate, Tialn Pvd Coated.
Used for soft materials and exotic alloys.
Suitable For Low-To-Medium Cutting Speeds.
Developed For Machining Of Heat Resistant Alloys, Austenitic Stainless Steel And Hard Steel. Technical Specifications:l = 6.45 mmdi = 6.35 mmS = 2.38 mmr = 0.8 mmd1 = 2.8 mmft(min) = 0.07 mmft(max) = 0.25 mmap(min) = 0.5 mmap(max) = 2.5 mmPlease Note: Image displayed on website is reference, the product specifications will be same however the actual product color might differ.

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -D Grade THM, DNMG

By GENERIC

Pack of 10 piece

₹1,533 - ₹3,421

GENERIC DNMG Turning Inserts in D Grade THM are engineered for dependable performance in general-purpose turning operations. Featuring a robust DNMG geometry, these inserts deliver enhanced edge strength and stability under moderate cutting loads. The THM grade provides reliable wear resistance and toughness, enabling smooth machining of steel and general engineering materials. Suitable for roughing and semi-finishing applications, these inserts offer consistent chip control and surface quality. Their standardized DNMG design allows easy installation in commonly used tool holders, making them a practical choice for daily production work.

Grade : THM

Application : Industrial

Type of Product : Turning Inserts -D

Series : DNMG

Explore other Variants (2)

Ships within 4 days

Korea Wald Turning Inserts CNMG120408 Piece CNMG 0.8mm 1 10 Pcs CVD Coated

By Korea Wald

₹2,005  

Add to Cart Buy Now

Related Searches

widia turning inserts

sandvik coromant turning inserts

alumina turning inserts

generic turning inserts

korloy turning inserts

Ships within 3 days

Assorts Heavy-Duty Radius Ball Turning Attachment ?Tool Steel 65 mm max Dia for 7x14 /7x16 Mini Lathe

By Assorts

₹12,979  

Achieve unmatched precision and reliability with the Ball Turning Attachment from Assorts. This high-performance Lathe Machine Parts, model: , is expertly crafted with Heavy-Duty Radius Tool Steel 65 mm max Dia for 7x14 /7x16 Mini Lathe for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The Ball Turning Attachment is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts Ball Turning Attachment. The thoughtfully selected Heavy-Duty Radius Tool Steel 65 mm max Dia for 7x14 /7x16 Mini Lathe are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the Ball Turning Attachment for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

Assorts Exclusive World's 1st Direct Fitting Ball Turning Attachment ?Tool Steel with Handle, 2x Carbide Inserrts & 1x T08 Key

By Assorts

₹17,699  

Achieve unmatched precision and reliability with the Ball Turning Attachment from Assorts. This high-performance Lathe Machine Parts, model: 2xCarbide Inserrts & 1xT08 Key, is expertly crafted with Exclusive World's 1st Direct Fitting Tool Steel with Handle for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The Ball Turning Attachment is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts Ball Turning Attachment. The thoughtfully selected Exclusive World's 1st Direct Fitting Tool Steel with Handle are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the Ball Turning Attachment for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -T, TNMG160FM (Pack of 5)

By GENERIC

Pack of 5 piece

₹884 - ₹884

GENERIC Turning Inserts -T, TNMG160FM (Pack of 5) is a modern lighting solution designed to provide efficient illumination with a clean and professional finish. Developed by GENERIC, this product is engineered to deliver consistent light output while supporting energy-efficient performance. Its thoughtfully designed structure ensures uniform brightness, visual comfort, and suitability for a wide range of residential, commercial, and retail lighting applications. Built for durability and long-term use, GENERIC Turning Inserts -T, TNMG160FM (Pack of 5) offers reliable operation with minimal maintenance requirements. The product complements contemporary interiors and helps enhance overall ambience while reducing power consumption. Backed by the quality standards of GENERIC, it is a dependable choice for users seeking performance, longevity, and cost-effective lighting solutions.

Application : Industrial

Type of Product : Turning Inserts -T

Pack of : 5

Series : TNMG

Explore other Variants (4)

Ships within 5 days

Korea Wald Turning Inserts CNMG120404 Piece CNMG 0.4mm 1 10 Pcs CVD Coated

By Korea Wald

₹2,005  

Add to Cart Buy Now

Ships within 3 days

WIDIA Turning Inserts CNMG1906125 Grade- TN4000 (Insert IC Size 19.05)

By WIDIA

Pack of 10 piece

₹4,955   ₹6,691

You save ₹1,736!

25.94% OFF

CNMG has greater strength for maximum material removal.
CNMG is available in all types of geometries.
One insert covers a wide variety of jobs.
CNMG is versatile in application.

Add to Cart Buy Now

Ships within 3 days

Assorts Lathe's Ball Turning Attachment with Size Scale Tool Steel 42 mm Round Base Double Bit

By Assorts

₹4,247  

Achieve unmatched precision and reliability with the Lathe's Ball Turning Attachment with Size Scale Tool Steel 42 mm Round Base Double Bit from Assorts. This high-performance Workshop Tools, identified by SKU: TOO.TUR.134477294, is expertly crafted with for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The Lathe's Ball Turning Attachment with Size Scale Tool Steel 42 mm Round Base Double Bit is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts Lathe's Ball Turning Attachment with Size Scale Tool Steel 42 mm Round Base Double Bit. The thoughtfully selected are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the Lathe's Ball Turning Attachment with Size Scale Tool Steel 42 mm Round Base Double Bit for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -T Gold Grade THM, TCMT

By GENERIC

Pack of 5 piece

₹1,415 - ₹2,713

GENERIC Turning Inserts -T Gold Grade THM, TCMT is a modern lighting solution designed to provide efficient illumination with a clean and professional finish. Developed by GENERIC, this product is engineered to deliver consistent light output while supporting energy-efficient performance. Its thoughtfully designed structure ensures uniform brightness, visual comfort, and suitability for a wide range of residential, commercial, and retail lighting applications. Built for durability and long-term use, GENERIC Turning Inserts -T Gold Grade THM, TCMT offers reliable operation with minimal maintenance requirements. The product complements contemporary interiors and helps enhance overall ambience while reducing power consumption. Backed by the quality standards of GENERIC, it is a dependable choice for users seeking performance, longevity, and cost-effective lighting solutions.

Grade : THM

Application : Industrial

Type of Product : Turning Inserts -T

Series : TCMT

Explore other Variants (2)

Ships within 3 days

GENERIC Turning Inserts -C Grade TN4000, CNMG (Pack of 10)

By GENERIC

Pack of 10 piece

₹2,359 - ₹5,545

GENERIC CNMG Turning Inserts in C Grade TN4000 are engineered for high-load and continuous turning applications where strength and durability are essential. Featuring a robust negative geometry, these inserts provide excellent edge strength, stability, and resistance to chipping during medium to heavy roughing and semi-finishing operations. The TN4000 grade offers superior wear resistance and thermal stability, allowing consistent performance at higher cutting speeds while extending tool life. Suitable for machining steel, alloy steel, and general engineering materials, these inserts ensure reliable chip control and dimensional accuracy. Supplied in a cost-effective pack of 10, they are ideal for production environments seeking efficiency, reduced downtime, and dependable machining results.

Grade : TN4000

Application : Industrial

Type of Product : Turning Inserts -C

Pack of : 10

Series : CNMG

Explore other Variants (10)

Ships within 3 days

ALUMINA Tungsten Carbide Aluminum Insert VCGT 160404 ALK 10

By ALUMINA

₹1,037  

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -S, SPUN (Pack of 5)

By GENERIC

Pack of 5 piece

₹530 - ₹1,769

GENERIC Turning Inserts -S, SPUN (Pack of 5) is a modern lighting solution designed to provide efficient illumination with a clean and professional finish. Developed by GENERIC, this product is engineered to deliver consistent light output while supporting energy-efficient performance. Its thoughtfully designed structure ensures uniform brightness, visual comfort, and suitability for a wide range of residential, commercial, and retail lighting applications. Built for durability and long-term use, GENERIC Turning Inserts -S, SPUN (Pack of 5) offers reliable operation with minimal maintenance requirements. The product complements contemporary interiors and helps enhance overall ambience while reducing power consumption. Backed by the quality standards of GENERIC, it is a dependable choice for users seeking performance, longevity, and cost-effective lighting solutions.

Application : Industrial

Type of Product : Turning Inserts -S

Pack of : 5

Series : SPUN

Explore other Variants (8)

Ships within 3 days

Kennametal CNMG Series Turning Insert Grade KCK20 (Pack of 10)

By Kennametal

Pack of 10 piece

₹5,191 - ₹11,209

You save ₹2,615!

33.5% OFF

The Kennametal CNMG Series Turning Insert, equipped with Grade KCK20, is designed for versatile turning applications. Featuring a strong cutting edge and optimized chipbreaker geometry, this insert delivers efficient chip control and smooth cutting action. Suitable for machining steel, stainless steel, and high-temperature alloys, it offers excellent wear resistance and thermal stability. With the Kennametal Kenloc mounting system, it ensures secure and precise positioning, enhancing machining accuracy and productivity.

Product Sub Type : Kenloc Un Universal Negative I

Type : Turning Insert

Grade : KCK20

Shape : 80° Rhombic

Material : CVD Coated Carbide

Included Angle : 80

Standard Packing : 10 Pcs

Clearance Angle : 0

Style : CNMG

Number of Cutting Edge : 8

Explore other Variants (2)

Ships within 3 days

GENERIC Turning Inserts -C, CNMG12040 (Pack of 5)

By GENERIC

Pack of 5 piece

₹1,132 - ₹1,132

GENERIC CNMG12040 Turning Inserts in a pack of 5 deliver reliable performance for workshops with moderate machining requirements. Designed for strength and stability, these inserts perform effectively in roughing and semi-finishing applications on steel and general engineering materials. Their negative geometry ensures resistance to chipping and consistent dimensional accuracy under load. Made from quality carbide and compatible with standard CNMG holders, these inserts offer efficient machining performance with flexibility and cost control.

Application : Industrial

Type of Product : Turning Inserts -C

Pack of : 5

Series : CNMG

Explore other Variants (4)

Ships within 3 days

ALUMINA Tungsten Carbide Aluminum Insert VCGT 160408 ALK 10

By ALUMINA

₹978  

Add to Cart Buy Now

Ships within 3 days

ALUMINA Tungsten Carbide Aluminum Insert DCGT 11T302 ALK 10

By ALUMINA

₹719  

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -C Grade THM, CNMG

By GENERIC

Pack of 5 piece

₹2,241 - ₹4,483

GENERIC CNMG Turning Inserts in C Grade THM are engineered for stable and efficient turning under higher cutting loads. Featuring a strong negative geometry, these inserts provide excellent edge strength and resistance to chipping, making them suitable for medium to heavy roughing and semi-finishing operations. The THM grade enhances durability and wear resistance, ensuring consistent tool life during continuous machining of steel and alloy steel materials. Designed for effective chip control and dimensional stability, these inserts help maintain accuracy even in demanding conditions. The standardized CNMG shape ensures compatibility with a wide range of turning tool holders, enabling flexible and productive machining setups.

Grade : THM

Application : Industrial

Type of Product : Turning Inserts -C

Series : CNMG

Explore other Variants (2)

Ships within 5 days

KORLOY Turning Insert DNMG150608-VM Grade NC3220

By KORLOY

Pack of 10 piece

₹34,219  

Angle :- Corner: 55°, Relief: 0°t :- 6.35 mmr :- 0.8 mmFeatures: Negative, with Hole, Rhombic, Double Sided

Add to Cart Buy Now

Ships within 5 days

Korea Wald Turning Inserts TNMG160404 Piece TNMG 0.4mm 1 10 Pcs CVD Coated

By Korea Wald

₹1,887  

Add to Cart Buy Now

Ships within 3 days

Assorts Radius Ball Turning Tool Steel 9.5 mm (3/8 Inch) for Lathe Machine

By Assorts

₹5,545  

Achieve unmatched precision and reliability with the Turning Tool from Assorts. This high-performance Cutting Tools, model: , is expertly crafted with Radius Ball Tool Steel 9.5 mm (3/8 Inch) for Lathe Machine for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The Turning Tool is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts Turning Tool. The thoughtfully selected Radius Ball Tool Steel 9.5 mm (3/8 Inch) for Lathe Machine are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the Turning Tool for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -R, RCMX (Pack of 5)

By GENERIC

Pack of 5 piece

₹636 - ₹6,253

The GENERIC Turning Inserts -R, RCMX (Pack of 5) provide precise and stable cutting performance for everyday turning applications. Crafted from durable carbide material, these inserts deliver strong resistance to wear and thermal stress, ensuring long tool life and consistent results. The RCMX insert design enables smooth chip flow and reduced vibration during machining, helping achieve clean surface finishes. Suitable for use on steel and similar metals, these inserts are ideal for light to medium cutting operations. Offered in a pack of 5, they are well-suited for smaller workshops or tool replacement needs, delivering reliability, accuracy, and value.

Application : Industrial

Type of Product : Turning Inserts -R

Pack of : 5

Series : RCMX

Explore other Variants (7)

Ships within 3 days

Deskar Carbide Turning Inserts Polished Coating APMT Type for CNC Machine, LF6018 (10 Pcs x 1 Box)

By DESKAR

Pack of 10 piece

₹2,595  

Deskar Carbide Turning Inserts Polished Coating APMT Type for CNC Machine, LF6018 (10 Pcs x 1 Box) are engineered to deliver reliable cutting efficiency and consistent machining accuracy in CNC applications. Designed with APMT geometry, these inserts feature sharp cutting edges that support smooth material removal and improved surface finish. The polished coating minimizes friction at the cutting interface, enhances chip evacuation, and reduces heat buildup during operation. Manufactured using LF6018 grade carbide, the inserts provide dependable wear resistance and structural strength, making them suitable for machining steel and other commonly processed materials under regular production conditions. Ideal for professional workshops and industrial manufacturing units, Deskar Carbide Turning Inserts Polished Coating APMT Type for CNC Machine, LF6018 (10 Pcs x 1 Box) offer extended tool life and stable cutting performance. Their precision-ground design helps maintain dimensional accuracy while reducing vibration and edge wear. Supplied in a convenient pack of 10 pieces, these inserts ensure uninterrupted workflow and cost-effective CNC machining for repetitive turning and light milling operations.

Add to Cart Buy Now

Ships within 3 days

WIDIA Turning Inserts CCMT120408 Grade- HK1500

By WIDIA

Pack of 10 piece

₹3,893  

Add to Cart Buy Now

Ships within 3 days

WIDIA Turning Inserts CNMG1204085 Grade- TN4000 (Insert IC Size 12.7)

By WIDIA

Pack of 10 piece

₹3,421  

CNMG has greater strength for maximum material removal.
CNMG is available in all types of geometries.
One insert covers a wide variety of jobs.
CNMG is versatile in application.

Add to Cart Buy Now

Ships within 3 days

WIDIA Turning Inserts TNMG160404 Grade- THM

By WIDIA

Pack of 10 piece

₹2,241  

Add to Cart Buy Now

Ships within 5 days

KORLOY Turning Insert VBMT110304-HMP Grade NC3220

By KORLOY

₹29,499  

Angle :- Corner: 35°, Relief: 5°t :- 3.18 mmr :- 0.4 mmFeatures: Positive, with Hole, Rhombic

Add to Cart Buy Now

Ships within 3 days

ALUMINA Tungsten Carbide Aluminum Insert TNMG 160404 ALK 10

By ALUMINA

₹801  

Add to Cart Buy Now

Ships within 3 days

GENERIC Turning Inserts -T, VNMG (Pack of 5)

By GENERIC

Pack of 5 piece

₹1,297 - ₹1,297

GENERIC Turning Inserts -T, VNMG (Pack of 5) is a modern lighting solution designed to provide efficient illumination with a clean and professional finish. Developed by GENERIC, this product is engineered to deliver consistent light output while supporting energy-efficient performance. Its thoughtfully designed structure ensures uniform brightness, visual comfort, and suitability for a wide range of residential, commercial, and retail lighting applications. Built for durability and long-term use, GENERIC Turning Inserts -T, VNMG (Pack of 5) offers reliable operation with minimal maintenance requirements. The product complements contemporary interiors and helps enhance overall ambience while reducing power consumption. Backed by the quality standards of GENERIC, it is a dependable choice for users seeking performance, longevity, and cost-effective lighting solutions.

Application : Industrial

Type of Product : Turning Inserts -T

Pack of : 5

Series : VNMG

Explore other Variants (9)

Ships within 3 days

GENERIC Turning Inserts -T, TNMG160FM (Pack of 10)

By GENERIC

Pack of 10 piece

₹1,769 - ₹1,769

GENERIC Turning Inserts -T, TNMG160FM (Pack of 10) is a modern lighting solution designed to provide efficient illumination with a clean and professional finish. Developed by GENERIC, this product is engineered to deliver consistent light output while supporting energy-efficient performance. Its thoughtfully designed structure ensures uniform brightness, visual comfort, and suitability for a wide range of residential, commercial, and retail lighting applications. Built for durability and long-term use, GENERIC Turning Inserts -T, TNMG160FM (Pack of 10) offers reliable operation with minimal maintenance requirements. The product complements contemporary interiors and helps enhance overall ambience while reducing power consumption. Backed by the quality standards of GENERIC, it is a dependable choice for users seeking performance, longevity, and cost-effective lighting solutions.

Application : Industrial

Type of Product : Turning Inserts -T

Pack of : 10

Series : TNMG

Explore other Variants (4)

Ships within 3 days

Deskar Carbide Turning Inserts Polished Coating TNMG Type for CNC Machine, 160408 MS LF6118 (10 Pcs x 1 Box)

By DESKAR

Pack of 10 piece

₹3,303  

Deskar Carbide Turning Inserts Polished Coating TNMG Type for CNC Machine, 160408 MS LF6118 (10 Pcs x 1 Box) are developed to provide stable and efficient metal cutting performance in CNC turning applications. The TNMG 160408 geometry ensures excellent strength with a balanced 0.8 mm corner radius, supporting both finishing and medium cutting operations. Featuring a polished coating, these inserts reduce friction at the cutting zone, enhance chip flow, and help achieve a smoother surface finish. The LF6118 grade offers dependable wear resistance and thermal stability, making it suitable for machining steel and allied materials under consistent production conditions. Designed for reliability and productivity, Deskar Carbide Turning Inserts Polished Coating TNMG Type for CNC Machine, 160408 MS LF6118 (10 Pcs x 1 Box) deliver precise dimensional accuracy and extended tool life. The MS chipbreaker geometry supports controlled chip evacuation and stable cutting action, reducing vibration during operation. Supplied in a convenient pack of 10 pieces, these inserts are ideal for professional workshops and industrial environments seeking cost-effective and consistent CNC machining performance.

Add to Cart Buy Now

Ships within 5 days

KORLOY Turning Insert DCMT11T302-HMP Grade NC3220

By KORLOY

Pack of 10 piece

₹34,219  

Angle :- Corner: 55°, Relief: 7°t :- 3.97 mmr :- 0.2 mmFeatures: Negative, with Hole, Rhombic

Add to Cart Buy Now

Ships within 5 days

KORLOY Turning Insert KNUX160405L-12 Grade NC3220

By KORLOY

Pack of 10 piece

₹34,219  

Angle :- Corner: 55°, Relief: 0°t :- 4.76 mmr :- 0.5 mmFeatures: Negative, without Hole, Parallelogram, Double Sided

Add to Cart Buy Now

Ships within 3 days

Kennametal Turning Insert TNMG160408RP Grade KCK20

By Kennametal

Pack of 10 piece

₹4,483   ₹6,784

You save ₹2,301!

33.92% OFF

Kennametal products make it simple to get the most out of your inserts, and your money. Every insert is gold, which exposes wear as the tool continues to be used making it easy to detect when an insert is ready to be changed maximising the products value and protecting the workpiece. Also, because Kennametal inserts can be used in most applications, a single insert can take on any number of tasks, thus reducing your inventory. Kennametal products are also reliable enough to cut steel, stainless steel, cast iron, and high-temperature alloys, enabling quick changes in workpiece materials without the need to swap inserts, saving time and money.
Features
Negative-Lock Pin, Double Sided Insert
Designed according to ISO specifications
Suitable for Finishing geometry with sharp edge line

Add to Cart Buy Now

Ships within 3 days

ALUMINA Tungsten Carbide Aluminum Insert DCGT 11T304 ALK 10

By ALUMINA

₹719  

Add to Cart Buy Now

Ships within 3 days

ALUMINA Tungsten Carbide Aluminum Insert DCGT 070202 ALK 10

By ALUMINA

₹565  

Add to Cart Buy Now

Ships within 5 days

KORLOY Turning Insert TNMG160408-VF Grade NC3120

By KORLOY

Pack of 10 piece

₹28,319  

Add to Cart Buy Now

Ships within 3 days

SKY Tooling TNMG Double Coated Turning Insert (Pack of 10)

By SKY Tooling

Pack of 10 piece

₹2,005 - ₹2,123

The SKY Tooling TNMG Double Coated Turning Insert (Pack of 10) is a premium choice for professionals seeking superior performance and reliability in their turning operations. Designed to meet the highest standards of precision and durability, these inserts are perfect for a wide range of turning applications, including those involving steel, stainless steel, and cast iron. Constructed from high-grade carbide, the TNMG turning inserts offer exceptional hardness and toughness, making them suitable for both roughing and finishing tasks. The double coating on these inserts is a standout feature, providing enhanced resistance to wear and heat. This advanced coating technology ensures longer tool life and maintains cutting efficiency even in demanding machining conditions. The TNMG series inserts boast a triangular design with multiple cutting edges, allowing for efficient and economical use. Each edge delivers clean and precise cuts, contributing to smoother finishes and improved workpiece quality. The inserts are also designed to facilitate effective chip evacuation, reducing the risk of build-up and ensuring consistent performance.

Product Sub Type : Double Coated

Shape : Triangle

Coating : CVD Coated

Material : Tungsten carbide

Type of Product : Turning Insert

Explore other Variants (2)

Ships within 3 days

Buyohlic International 5C Collet Fixture for 5x3-5/8 inch Horizontal & Vertical Collet Holding

By Buyohlic International

₹10,029   ₹11,563

You save ₹1,534!

13.27% OFF

The Buyohlic International 5C Collet Fixture is a premium tool designed for precision in both horizontal and vertical collet holding. With a size of 5x3-5/8 inches, it provides a versatile and secure solution for holding 5C collets during machining operations. Ideal for turning inserts and other similar applications, this fixture ensures that your workpieces are firmly held in place, allowing for greater accuracy and efficiency. Its robust design makes it an essential addition to any workshop that demands precision and stability. Crafted from durable materials, the Buyohlic International 5C Collet Fixture is built to withstand the challenges of industrial use. Whether you are working on small or large projects, this fixture is designed to deliver exceptional performance. Its ease of use and adaptability for horizontal and vertical collet holding make it a versatile choice for various turning insert tasks. Upgrade your machining setup with this reliable tool to enhance your productivity and achieve consistent, high-quality results.

Add to Cart Buy Now

Previous Next

Page 1 of 30 results