• Home /
• Adhesives Sealants and Tape /
• Structural Adhesives /
• Chemical Fixing and Mortars

Have a question? Call us now at +91 9650660070

Chemical Fixing And Mortars

Showing 35 out of 35 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

Hilti HIT-RE 10 Injectable Mortar

By Hilti

₹2,359   ₹4,148

You save ₹1,789!

43.13% OFF

Features The economical injection mortar solution that can replace virtually all grout fastenings Suitable for post-installed rebar and concrete anchoring applications in accordance with Hilti technical data Compatible with Hilti’s full range of accessories (e.g. cordless electric dispenser, steel brushes, piston plug) Available in 580 ml hard cartridge, suitable for use under severe on-site conditions Allows flexible installation due to the long working time Applications Substitution of misplaced/missing rebar Connection of secondary post-installed rebar (e.g. staircases, upstands) Renovation/upgrading of post-installed rebar Rebar dowelling Anchoring non-structural secondary steel elements (e.g. columns, beams)

Add to Cart Buy Now

Ships within 24 hrs

Hilti RE500 V4 (500ML) Injection Mortar

By Hilti

₹11,327  

Injection Mortar are ideal for anchoring structural steel connections (e.g. steel columns, beams), and anchoring secondary steel structures (e.g. racking, guard rails, sound barriers). Our adhesive anchors can be used in concrete and retrofitting reinforced concrete buildings as well as strengthening concrete connections with post-installed rebar.

Add to Cart Buy Now

Ships within 24 hrs

Hilti HIT-RE 10 580/1-A1-P Epoxy Anchor Injectable Mortar, 2153749

By Hilti

Pack of 1 piece

₹2,241   ₹3,658

You save ₹1,417!

38.74% OFF

Hilti 2153748 Injectable Mortar HIT-RE 10 580/1-A1  is a high-strength, non-shrink material for use in non-cracked concrete. It is easy to install and requires no mixing or tamping. It can also be used in place of conventional mortar in cracked concrete so long as the cracks are identified by an experienced professional before treatment. Injectable Mortar is a fast-setting, single-pack mortar in a convenient cartridge for easy installation in cracks and joints. Injectable Mortar is a ready-mixed, polymer-modified mortar that provides low permeability and high compressive strength in the injected joints. Its superior adhesion to concrete and high bond strength on rebars makes it ideal for precast and cast-in-place structural applications. Injectable Mortar is a pre-blended and ready-to-use concrete repair mortar that’s easy to apply and fast setting. It’s suitable for non-cracked and cracked concrete and can be injected through standard tubing or nozzles - it's flexible enough to bend around corners so it can be easily applied underhand, which is especially useful when repairing walls. Injectable Mortar is a highly-versatile, easy-to-apply structural grout that can be used to repair non-cracked or cracked concrete. It may be used without the need for scaffolding, as it can be injected through small holes in the wall. The product will set within 8 hours and will leave your walls clean and ready to paint.

Add to Cart Buy Now

Ships within 24 hrs

Hilti HIT-HY 170 Adhesive Anchor Injectable Mortar 500 ml, 2132024

By Hilti

₹3,539   ₹5,434

You save ₹1,895!

34.87% OFF

Injection Mortar are ideal for anchoring structural steel connections (e.g. steel columns, beams), and anchoring secondary steel structures (e.g. racking, guard rails, sound barriers). Our adhesive anchors can be used in concrete and retrofitting reinforced concrete buildings as well as strengthening concrete connections with post-installed rebar.

Add to Cart Buy Now

Ships within 5 days

Dr Fixit 226 Polymer Mortar HB 25 kg

By Dr Fixit

Pack of 25 kilogram

₹1,500  

Add to Cart Buy Now

Ships within 3 days

Fischer FIS EM PLUS Injection Mortar

By Fischer

₹4,365 - ₹5,191

You save ₹1,705!

28.09% OFF

The Fischer FIS EM Plus Injection Mortar is a high-performance, epoxy-based chemical anchoring system designed for demanding structural applications. It provides exceptional load-bearing capacity and long-term reliability in cracked and non-cracked concrete, natural stone, and reinforcement connections. Formulated with advanced epoxy resin technology, FIS EM Plus ensures superior bond strength, minimal shrinkage, and excellent chemical and temperature resistance, making it suitable for indoor and outdoor installations. The slow-curing formulation allows for precise adjustment and deep embedment of anchor rods or rebar, ensuring maximum stability and safety. Ideal for heavy-duty applications such as steel structures, column bases, industrial machinery, and retrofitting works, it can be used in dry, wet, or water-filled holes. Its cartridge system allows for clean, controlled dispensing and easy application with standard injection tools. The Fischer FIS EM Plus Injection Mortar represents durability, strength, and professional reliability for critical anchoring and rebar connections in modern construction.

Type of Product : Injectable Mortar

Suitable For : Concrete C20/25 to C50/60, cracked and non-cracked

Packaging Type : Cartridge

Application : Post-installed rebar connections, Jointers for concrete layers, Rim beam anchorings, Seismic applications

Language : DE, EN, FR, NL, ES, PT

Approval : DIBt, ETA

Explore other Variants (2)

Ships within 3 days

Fischer FISV Plus 360S Vinylester Injection Mortar

By Fischer

₹1,887   ₹2,615

You save ₹728!

27.84% OFF

Fischer Injection mortar FIS V Plus is a cement-based mortar for injection into cells of brick walls. It may be used in the construction of new brick buildings or as a repair mortar in damaged brickwork. Injection mortar FIS V Plus contains no sand and therefore provides excellent adhesion to the bricks. The mortar can be injected into the wall in a single operation, making it ideal for large-scale projects where time is limited and efficiency paramount. The FIS V Plus 2 component injection mortar is a fast-setting, high early-strength injection mortar that bonds the entire surface of the anchor with the drill hole wall and seals the drill hole. The mortar forms an integral bond with concrete and steel surfaces. The FIS V Plus 2 component injection mortar is ideal for use in concrete repair works where it can be used to replace dowels or other mechanical fixings. It can also be used for anchoring reinforcement bars, mesh and mesh ties, cable ties, etc. The FIS V Plus system has been developed to provide a high-quality injection mortar solution for anchoring systems in different substrates such as concrete, steel, timber or masonry. Application Steelwork constructions Timber constructions Guard rails Façades Staircases Steel brackets Machines Masts Awnings Canopies Gates Consoles Pipelines Gratings Satellite antennas

Add to Cart Buy Now

Ships within 3 days

CANDORR Chemical Anchoring Cartridge Polyester Based Resin 360 ml, 2150SR

By CANDORR

₹1,533   ₹1,630

You save ₹97!

5.97% OFF

The CANDORR Chemical Anchoring Cartridge, 2150SR, is a high-performance solution designed for secure and permanent fastening in construction and industrial applications. This polyester-based resin cartridge is engineered to provide exceptional strength, reliability, and ease of use. With a substantial 360 ml capacity, the 2150SR is well-suited for a variety of anchoring tasks, offering ample material for efficient and reliable installations. The polyester-based resin is chosen for its robust bonding properties, ensuring a strong and durable connection between anchors and substrates. One of the key advantages of the CANDORR 2150SR Chemical Anchoring Cartridge is its versatility in application. Whether you are securing bolts, threaded rods, or other fixtures into concrete or masonry, this cartridge delivers a high-strength bond that withstands the test of time. It is particularly well-suited for structural and load-bearing applications where the integrity of the anchoring is crucial. The user-friendly design of the cartridge ensures ease of application. The 360 ml size strikes a balance between providing sufficient material for larger projects and maintaining manageable handling. The resin is dispensed using a compatible dispensing tool, making the application process precise and controlled. In summary, the CANDORR Chemical Anchoring Cartridge, 2150SR, stands as a reliable and versatile choice for professionals in the construction and industrial sectors. Its polyester-based resin formulation, substantial capacity, and user-friendly application make it an excellent solution for permanent anchoring, providing a secure and enduring fastening option for a wide range of projects.

Add to Cart Buy Now

Ships within 3 days

Fischer FIS EP 585 S Injection Mortar - 553514

By Fischer

₹3,047  

Fischer 585 ml Epoxy Injection Mortar FIS EP 585 S is a quick-curing job-site grade, mortar mix designed for the repair and restoration of concrete, stone or masonry. It's also used as a waterproofing compound in concrete foundations, subfloors and exterior walls. This epoxy can be used to fill wide gaps up to 12 inches deep. Fischer 585 ml Epoxy Injection Mortar is a two-component, thixotropic, polyamide epoxy injection mortar specifically designed for filling hollow sections of concrete and masonry members. These mortars are waterproof, have a high chemical resistance, and are resistant to acids and alkalies. The mortar can be used as a gap-filling compound as well as a shear transfer system that has been designed to withstand the effects of cyclic loading.
This product comes in 3 different colors: gray, black and brown. It is available in various packaging options, including 528 cm3 plastic containers with one-way valve; 1 liter plastic containers with one-way valve; 2 liter plastic containers with one-way valve; 5 liter plastic containers with one-way valve; 15 liter plastic containers with one-way valve; 30 liter plastic containers with one-way valve; and 454 ml cartridges.
Fischer 585 ml Epoxy Injection Mortar is a polymer modified epoxy injection mortar. It is a high performance mortar for use in concrete, masonry and steel structures to enhance the bond between dissimilar materials. The material resists hydrolysis and chemical attack and has low permeability. Fischer 585 ml Epoxy Injection Mortar offers superior adhesion properties in the presence of organic salts. It is suitable for use where high resistance to corrosion is required or where there are frequent changes in temperature or humidity.

Add to Cart Buy Now

Ships within 5 days

Fischer Injection Mortar FISV 360 S

By Fischer

Pack of 1 piece

₹1,887  

The versatile injection mortar system fror anchorings in masonry and cracked concrete.
Building Materials:
Approved for anchorings in:
Concrete C20/25 to C50/60, cracked and non-cracked
Hollow blocks made from lightweight concrete
Hollow blocks made from concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Aerated concrete
Solid brick
Approved for:
Rebar connections
Remedial wall tie VBS 8
Weather facing reconstruction system FWS II
Stand-off installation Thermax
Advantages:
The FISV injection mortar has numerous system approvals, such as in non-cracked concrete, masonry and for rebar connections. FISV is thus the universal injection mortar family with guaranteed reliability for practically all areas of application.
FISVW HIGH SPEED has a significantly shorter curing time than FISV, thus also ensuring swift work progress even at low temperatures.
FISVS LOW SPEED with extended gelling time prevents premature curing of the mortar at higher temperatures and is ideally suited to large drill hole depths.
The extensive range of accessories is ideally suited to the FISV injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications..
Applications:
Steelwork constructions
Timber constructions
Guard rails
Façades
Staircases
Steel brackets
Machines
Masts
Awnings
Canopies
Gates
Consoles
Pipelines
Gratings
Satellite antennas
Functioning:
The FIS V is a 2-component injection mortar based on vinyl ester hybrid.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through
the static mixer.
The injection cartridges are quick and easy to use with the fischer dispensers.
Partially used cartridges can be reused, simply by changing the static mixer.
Related accessories for the various applications can be found on pages (concrete), (masonry), (aerated concrete) and (rebar connection).

Add to Cart Buy Now

Ships within 3 days

Fischer Injection Mortar FIS P 380 C

By Fischer

₹1,769   ₹2,023

You save ₹254!

12.57% OFF

The reliable injection mortar for anchorings in masonry.
Advantages:
The FIS P is the economical solution for anchorings in masonry that do not require approvals.
The FIS P 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. This helps to reduce procurement costs.
Functioning:
The FIS P is a 2-component injection mortar based on polyester resin.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
Partially used cartridges can be reused, simply by changing the static mixer.

Add to Cart Buy Now

Ships within 3 days

CANDORR Chemical Anchoring Cartridge Pure Epoxy Resin 400 ml, SR500

By CANDORR

₹2,359   ₹2,659

You save ₹300!

11.29% OFF

The CANDORR Chemical Anchoring Cartridge, SR500, is a top-of-the-line solution designed to provide unmatched strength and durability in anchoring applications. With a generous 400 ml capacity, this cartridge contains a high-quality pure epoxy resin, making it a superior choice for critical fastening tasks in construction and industrial settings. The pure epoxy resin formulation of the SR500 cartridge sets it apart, offering exceptional bonding properties that ensure a reliable and long-lasting connection. Epoxy is renowned for its ability to create strong and rigid bonds, making it an ideal choice for applications where structural integrity and load-bearing capacity are paramount. The 400 ml size of the cartridge strikes a balance between providing sufficient material for larger projects and maintaining ease of handling. This capacity is particularly advantageous in scenarios where a significant amount of anchoring material is required for a secure and robust installation. The CANDORR SR500 Chemical Anchoring Cartridge is suitable for a wide range of applications, including securing threaded rods, bolts, and other fixtures into concrete or masonry. Its versatility makes it an essential tool for professionals in the construction and industrial sectors who demand high-performance anchoring solutions. The user-friendly design of the cartridge ensures straightforward and precise application. Compatible with dispensing tools, the SR500 allows for controlled and efficient dispensing of the epoxy resin, ensuring accurate placement and optimal results in every use. In summary, the CANDORR Chemical Anchoring Cartridge, SR500, with its pure epoxy resin formulation, substantial 400 ml capacity, and user-friendly application, stands as a superior choice for professionals seeking unparalleled strength and reliability in their anchoring projects.

Add to Cart Buy Now

Ships within 5 days

Fischer Injection Mortar FIS EM 585 S

By Fischer

₹4,837   ₹5,900

You save ₹1,063!

18.02% OFF

The powerful injection mortar for rebar connections and cracked concrete.
Building Material:
Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for: Natural stone with dense structure
Advantages:
High bond strengths and minor mortar shrinkage allow maximum load application in cracked and non-cracked concrete, even with large threaded rod diameters of up to M30.
Variable anchorage depths from 4x to 20x the threaded rod diameter allow for ideal adaptation to the load to be applied, and ensure an optimised installation time and use of materials.
FIS EM is also approved for diamond-drilled and water-filled drill holes, thus ensuring more flexibility on the construction site.
The Epoxy mortar FIS EM is approved for seismic applications C1, C2, which ensures safety even under extreme conditions.
Applications:
Heavy steel constructions
Silo installations
Tall shelving
Sound barriers
Jointers for concrete layers
Rim beam anchorings
Anchorings in diamond-drilled drill holes
Fixings in waterfilled drill holes
Seismic applications
Functioning:
The injection system, comprising the epoxy resin mortar FIS EM combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
The mortar is injected bubble-free from the drill hole base.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals off the drill hole.
The anchor rod is set manually by lightly rotating it until it reaches the drill hole base.
During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM.

Add to Cart Buy Now

Ships within 5 days

Fischer Injection Mortar FIS EM 390 S

By Fischer

₹3,775   ₹4,720

You save ₹945!

20.02% OFF

The powerful injection mortar for rebar connections and cracked concrete.
Building Material:
Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for: Natural stone with dense structure
Advantages:
High bond strengths and minor mortar shrinkage allow maximum load application in cracked and non-cracked concrete, even with large threaded rod diameters of up to M30.
Variable anchorage depths from 4x to 20x the threaded rod diameter allow for ideal adaptation to the load to be applied, and ensure an optimised installation time and use of materials.
FIS EM is also approved for diamond-drilled and water-filled drill holes, thus ensuring more flexibility on the construction site.
The Epoxy mortar FIS EM is approved for seismic applications C1, C2, which ensures safety even under extreme conditions.
Applications:
Heavy steel constructions
Silo installations
Tall shelving
Sound barriers
Jointers for concrete layers
Rim beam anchorings
Anchorings in diamond-drilled drill holes
Fixings in waterfilled drill holes
Seismic applications
Functioning:
The injection system, comprising the epoxy resin mortar FIS EM combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
The mortar is injected bubble-free from the drill hole base.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals off the drill hole.
The anchor rod is set manually by lightly rotating it until it reaches the drill hole base.
During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM.

Add to Cart Buy Now

Ships within 3 days

Fischer FIS SB 585 S Injection Mortar - 519452

By Fischer

₹4,719   ₹5,339

You save ₹620!

11.61% OFF

Fischer 585 ml Injection Mortar FIS SB 585 S is a high-grade, fast-setting mortar, tested for use as an injection mortar in small openings. It provides excellent binding strength and its elasticity ensures optimum conformity of the two facing materials. This product is designed for the single batch mixing of lightweight decorative mortars. It combines good workability with outstanding handling properties during application. Fischer 585 ml Injection Mortar is a two-component, thixotropic, polyamide injection mortar specifically designed for filling hollow sections of concrete and masonry members. These mortars are waterproof, have a high chemical resistance, and are resistant to acids and alkalies. The mortar can be used as a gap-filling compound as well as a shear transfer system that has been designed to withstand the effects of cyclic loading.
This product comes in 3 different colors: gray, black and brown. It is available in various packaging options, including 528 cm3 plastic containers with one-way valve; 1 liter plastic containers with one-way valve; 2 liter plastic containers with one-way valve; 5 liter plastic containers with one-way valve; 15 liter plastic containers with one-way valve; 30 liter plastic containers with one-way valve; and 454 ml cartridges.
Fischer 585 ml Injection Mortar is a polymer modified injection mortar. It is a high performance mortar for use in concrete, masonry and steel structures to enhance the bond between dissimilar materials. The material resists hydrolysis and chemical attack and has low permeability. Fischer 585 ml Injection Mortar offers superior adhesion properties in the presence of organic salts. It is suitable for use where high resistance to corrosion is required or where there are frequent changes in temperature or humidity.

Add to Cart Buy Now

Ships within 3 days

Fischer FIS EB 390 S Injection Mortar - 534984

By Fischer

₹3,303   ₹3,685

You save ₹382!

10.37% OFF

Fischer's EB 390 S is a flexible, solvent-free, cold curing epoxy injection mortar designed to fill voids and cracks in machinery and equipment. The fast setting epoxy injection mortar is easy to use and cures quickly at room temperature. Fischer EB 390 S is suitable for filling cavities in motors, compressors, pumps and fans. When it comes to the construction of heavy steel constructions, consoles, silo installations and tall shelving, there are very few products that can live up to the function and performance of FIS EB 390 S Injection Mortar Epoxy Injection Mortar. This high-performance product allows for concrete repairs from C20/20 to C50/60, cracks and non-cracked. The product was developed based on a special, patented formula and is available in a range of delivery systems, including cartridges, which makes it extremely easy to transport and handle. FIS EB 390 S is highly flexible and can be used in various situations that require high tensile strength or brittle resistance. It's also resistant to chemicals and has low shrinkage for optimal results. When combined with FIS MR Plus Concrete C20/20 to C50/60, cracks and non-cracked it can provide a long-lasting solution for all your injection mortar needs.

Add to Cart Buy Now

Ships within 5 days

Dr Fixit 257 Repair Polymer Mortar 25 Kg Grey

By Dr Fixit

Bag of 25 kilogram

₹670  

Dr. Fixit 257 Repair Polymer Mortar 25 Kg is a high-performance, polymer-modified repair mortar specially formulated to address a wide range of structural repair needs in both commercial and residential settings. Engineered by Dr. Fixit, a renowned name in construction solutions, this product offers exceptional strength, durability, and ease of application. Ideal for repairing concrete structures such as beams, columns, slabs, and walls, Dr. Fixit 257 Repair Polymer Mortar effectively restores the integrity and stability of damaged surfaces. Its advanced formulation ensures superior bonding to existing concrete substrates, providing long-lasting repairs that withstand harsh environmental conditions and heavy loads. One of the key features of this mortar is its versatility. It can be applied vertically, horizontally, or overhead, making it suitable for various repair scenarios. Whether filling cracks, patching spalls, or rehabilitating deteriorated concrete, Dr. Fixit 257 Repair Polymer Mortar delivers excellent adhesion and structural reinforcement. Another advantage of this product is its user-friendly nature. With a simple mix-and-apply process, it enables efficient repairs with minimal downtime. Contractors and DIY enthusiasts alike appreciate its ease of handling and smooth application, allowing for hassle-free project execution. Furthermore, Dr. Fixit 257 Repair Polymer Mortar exhibits excellent resistance to water ingress, chemicals, and abrasion, ensuring long-term performance and protection against corrosion and deterioration. Its superior durability helps extend the service life of repaired structures, reducing the need for frequent maintenance and costly repairs. Overall, Dr. Fixit 257 Repair Polymer Mortar 25 Kg is a reliable solution for addressing concrete repair challenges, offering unmatched strength, durability, and ease of use. Whether used in small-scale repairs or large-scale rehabilitation projects, it provides peace of mind knowing that structures are fortified with a high-quality, long-lasting repair mortar.

Add to Cart Buy Now

Ships within 12 days

Hilti Hit-RE 500 V4 Epoxy Anchor Injectable Mortar

By Hilti

₹9,557 - ₹12,979

The Hilti Hit-RE 500 V4 Epoxy Anchor Injectable Mortar is a high-performance anchoring solution designed for heavy-duty applications in concrete and masonry. This injectable mortar is part of Hilti's renowned HIT-RE 500 system, known for its reliability and strength. The V4 formulation ensures enhanced performance, making it suitable for critical anchoring situations where high load capacity and durability are required. This epoxy anchor mortar offers easy and convenient application, thanks to its injectable format. It can be used with standard dispensing tools, making installation quick and efficient. The mortar cures to form a strong bond with the base material, providing reliable anchoring for structural elements such as columns, beams, and equipment. Its high bond strength and resistance to environmental conditions make it ideal for both indoor and outdoor applications. The Hilti Hit-RE 500 V4 Epoxy Anchor Injectable Mortar is suitable for use in a wide range of temperatures, making it versatile for various construction projects. It complies with the latest international standards for anchoring performance, ensuring that it meets the requirements for safety and reliability. Whether used in new construction or retrofitting existing structures, this epoxy anchor mortar provides a durable and dependable anchoring solution.

Type of Product : Injectable Mortar

Base Material : Non-cracked and Cracked Concrete

Compatible Surface : Dry, Wet

PROFIS Software : Yes

Package Contains : 1x Foil Pack, 2x Mixer, 1x Mixer Extension

Storage Temperature Range : 5 - 25 °C

Working temperature range : -40 - 75 °C

Approvals : ETA, Fire

Cleaning procedures : Automatic cleaning (SafeSet hollow drill bit), Compressed-air cleaning, Manual cleaning

Explore other Variants (2)

Ships within 12 days

Hilti Hit-HY 200-R V3 Adhesive Anchor Injectable Mortar

By Hilti

₹7,905 - ₹10,029

The Hilti Hit-HY 200-R V3 Adhesive Anchor Injectable Mortar is a high-performance anchoring solution designed for a wide range of applications in concrete and masonry structures. This advanced mortar offers exceptional strength and reliability, making it ideal for demanding construction projects where structural integrity is paramount. The Hit-HY 200-R V3 features a hybrid mortar formulation that combines the benefits of both epoxy and cementitious mortars. This results in a versatile adhesive that offers excellent load-bearing capacity and durability, even in challenging conditions. One of the key features of the Hit-HY 200-R V3 is its ease of use. The mortar comes in a convenient cartridge that can be easily dispensed using a standard caulking gun, making installation quick and efficient. Once dispensed, the mortar has a long open time, allowing for precise placement of anchors before it sets. The Hit-HY 200-R V3 is also designed with safety in mind. It is solvent-free and has a low odor, making it safe to use in enclosed or poorly ventilated areas. Additionally, the mortar is ETA-approved for use in seismic conditions, providing added assurance of its reliability and performance.

Type of Product : Injectable Mortar

Color : Red, White

Base Material : Non-cracked and Cracked Concrete

Compatible Surface : Dry, Wet

PROFIS Software : Yes

Package Contains : 1x Foil Pack, 2x Mixer, 1x Mixer Extension

Class : Ultimate

Storage Temperature Range : 5 - 25 °C

Working temperature range : -40 - 120 °C

Approvals : ETA, ICC-ES report (concrete)

Cleaning procedures : Compressed-Air Cleaning, Manual Cleaning

Explore other Variants (2)

Ships within 12 days

Hilti HIT-RE 100 Epoxy Anchor Injectable Mortar 500 ml, 2123386

By Hilti

₹7,304  

Hilti Injectable Mortar emerges as an economical and versatile solution, poised to replace a wide range of grout fastenings in diverse construction applications. This innovative mortar solution, developed by Hilti, reflects the brand's commitment to providing efficient and reliable construction materials. Designed to offer a cost-effective alternative to traditional grouting methods, this injectable mortar is particularly advantageous for post-installed rebar and concrete anchoring applications, aligning seamlessly with Hilti's technical data and specifications. The versatility of Hilti's Injectable Mortar is a key highlight, as it caters to a spectrum of construction needs, making it a valuable resource for professionals across the industry. The formulation of the mortar is engineered to meet the stringent requirements of post-installed rebar and concrete anchoring, ensuring a secure and durable connection in various structural elements. This solution's economic advantages extend beyond its initial cost-effectiveness. By providing a reliable alternative to conventional grout fastenings, Hilti Injectable Mortar contributes to enhanced efficiency in construction projects. The streamlined injection process minimizes installation time, offering a practical solution for time-sensitive projects without compromising on the integrity of the anchoring application. Moreover, the compatibility of this injectable mortar with Hilti's technical data underscores its reliability and compliance with industry standards. Professionals can confidently rely on Hilti Injectable Mortar for its efficacy in post-installed rebar and concrete anchoring, recognizing it as a dependable and economical choice in the ever-evolving landscape of construction materials.

Add to Cart Buy Now

Ships within 12 days

Hilti HIT-MM PLUS Adhesive Anchor Injectable Mortar 330 ml Cartridge, 2031079

By Hilti

₹2,938  

Hilti Injectable Mortar emerges as an economical and versatile solution, poised to replace a wide range of grout fastenings in diverse construction applications. This innovative mortar solution, developed by Hilti, reflects the brand's commitment to providing efficient and reliable construction materials. Designed to offer a cost-effective alternative to traditional grouting methods, this injectable mortar is particularly advantageous for post-installed rebar and concrete anchoring applications, aligning seamlessly with Hilti's technical data and specifications. The versatility of Hilti's Injectable Mortar is a key highlight, as it caters to a spectrum of construction needs, making it a valuable resource for professionals across the industry. The formulation of the mortar is engineered to meet the stringent requirements of post-installed rebar and concrete anchoring, ensuring a secure and durable connection in various structural elements. This solution's economic advantages extend beyond its initial cost-effectiveness. By providing a reliable alternative to conventional grout fastenings, Hilti Injectable Mortar contributes to enhanced efficiency in construction projects. The streamlined injection process minimizes installation time, offering a practical solution for time-sensitive projects without compromising on the integrity of the anchoring application. Moreover, the compatibility of this injectable mortar with Hilti's technical data underscores its reliability and compliance with industry standards. Professionals can confidently rely on Hilti Injectable Mortar for its efficacy in post-installed rebar and concrete anchoring, recognizing it as a dependable and economical choice in the ever-evolving landscape of construction materials.

Add to Cart Buy Now

Ships within 12 days

Hilti HIT-RE 100 Epoxy Anchor Injectable Mortar 500 ml, 3623114

By Hilti

₹3,30,399   ₹3,63,027

You save ₹32,628!

8.99% OFF

The Kit Injectable Mortar HIT-RE 100/500 ml stands as a testament to excellence in construction materials, providing a high-performance solution for a wide range of masonry applications. Meticulously formulated and crafted with precision, this mortar is designed to deliver exceptional bonding strength and durability, making it an indispensable choice for professionals in the construction industry. Engineered for versatility, the Hilti Mortar is suitable for various masonry projects, including bricklaying, blockwork, and stone applications. Its advanced formulation ensures reliable adhesion, enhancing the structural integrity of constructions while providing resistance against environmental elements and weathering. One of the notable features of the Hilti Mortar is its ease of use. The mortar comes in a user-friendly package, and its consistent composition allows for straightforward mixing and application. This makes it suitable for both large-scale construction projects and smaller, detailed applications, ensuring efficiency and convenience on the job site. Furthermore, the Hilti Mortar demonstrates excellent durability, maintaining its structural integrity over time. It possesses properties that resist shrinkage and cracking, ensuring a long-lasting bond between masonry elements. Whether you are a professional mason or a DIY enthusiast, trust the Hilti Mortar to deliver reliable performance and lasting results in your construction projects. Elevate your masonry work with a product that reflects Hilti's commitment to quality and innovation in construction solutions.

Add to Cart Buy Now

Ships within 12 days

Hilti HIT-HY 270 Adhesive Anchor Injectable Mortar 330 ml Cartridge, 2095982

By Hilti

₹6,691  

Hilti Injectable Mortar emerges as an economical and versatile solution, poised to replace a wide range of grout fastenings in diverse construction applications. This innovative mortar solution, developed by Hilti, reflects the brand's commitment to providing efficient and reliable construction materials. Designed to offer a cost-effective alternative to traditional grouting methods, this injectable mortar is particularly advantageous for post-installed rebar and concrete anchoring applications, aligning seamlessly with Hilti's technical data and specifications. The versatility of Hilti's Injectable Mortar is a key highlight, as it caters to a spectrum of construction needs, making it a valuable resource for professionals across the industry. The formulation of the mortar is engineered to meet the stringent requirements of post-installed rebar and concrete anchoring, ensuring a secure and durable connection in various structural elements. This solution's economic advantages extend beyond its initial cost-effectiveness. By providing a reliable alternative to conventional grout fastenings, Hilti Injectable Mortar contributes to enhanced efficiency in construction projects. The streamlined injection process minimizes installation time, offering a practical solution for time-sensitive projects without compromising on the integrity of the anchoring application. Moreover, the compatibility of this injectable mortar with Hilti's technical data underscores its reliability and compliance with industry standards. Professionals can confidently rely on Hilti Injectable Mortar for its efficacy in post-installed rebar and concrete anchoring, recognizing it as a dependable and economical choice in the ever-evolving landscape of construction materials.

Add to Cart Buy Now

Ships within 12 days

Hilti Firestop Foam 300 ml Red for Concrete, Masonry, Drywall, 2373132 (Pack of 12)

By Hilti

Pack of 12 piece

₹1,415  

he Hilti Firestop Foam (model 2373132) is a high-performance sealing solution designed to protect against the spread of fire, smoke, and gases. Packaged in a convenient 300 ml container, this foam is ideal for use on concrete, masonry, and drywall surfaces. It provides an effective barrier for joints, gaps, and penetrations, ensuring enhanced fire resistance in building structures. The foam is designed to expand and seal quickly, filling voids and offering superior sealing properties that meet stringent fire safety standards.

Add to Cart Buy Now

Ships within 12 days

Hilti Adhesive Anchor ETA, ICC-ES Report (Concrete), 2222131 (Pack of 5)

By Hilti

Pack of 5 piece

₹5,073   ₹5,799

You save ₹726!

12.52% OFF

The Hilti Adhesive Anchor (2222131) is a high-performance bonding solution designed for structural anchoring in concrete. With ETA and ICC-ES certification, this adhesive anchor meets international safety and reliability standards, ensuring secure and long-lasting fastening in both cracked and uncracked concrete. It provides high load-bearing capacity, making it ideal for heavy-duty applications such as structural reinforcements, seismic upgrades, and industrial installations.

Add to Cart Buy Now

Ships within 12 days

Hilti Stone Undercut Anchor Stainless Steel, A4 Externally Threaded, 2179728 (Pack of 5)

By Hilti

Pack of 5 piece

₹5,191   ₹5,889

You save ₹698!

11.86% OFF

The Hilti Stone Undercut Anchor (model 2179728) is a high-performance fixing solution specifically designed for use in stone materials. Made from stainless steel A4, this anchor provides excellent resistance to corrosion, ensuring longevity and reliability even in harsh environments. Its externally threaded design allows for easy installation and secure fastening, making it ideal for applications where a strong and durable hold is needed.

Add to Cart Buy Now

Ships within 12 days

Hilti Adhesive Anchor ETA, ICC-ES Report (Concrete), 3905964

By Hilti

₹5,64,371   ₹7,55,873

You save ₹191,502!

25.34% OFF

The Hilti Adhesive Anchor (3905964) is a high-performance bonding solution designed for structural anchoring in concrete. With ETA and ICC-ES certification, this adhesive anchor meets international safety and reliability standards, ensuring secure and long-lasting fastening in both cracked and uncracked concrete. It provides high load-bearing capacity, making it ideal for heavy-duty applications such as structural reinforcements, seismic upgrades, and industrial installations.

Add to Cart Buy Now

Ships within 12 days

Hilti Epoxy Anchor 5 to 25 °C Temperature Range, 3788386

By Hilti

₹7,81,354   ₹10,46,483

You save ₹265,129!

25.34% OFF

The Hilti Epoxy Anchor (3788386) is a high-performance anchoring solution designed for structural applications in concrete and masonry. Engineered to withstand a temperature range of 5 to 25°C, this epoxy-based adhesive provides exceptional bonding strength, making it ideal for heavy-duty load applications in construction, infrastructure, and industrial projects. It offers superior resistance to dynamic loads, moisture, and chemical exposure, ensuring long-term durability and structural integrity.

Add to Cart Buy Now

Ships within 12 days

Hilti Epoxy Anchor 5 to 25 °C Temperature Range, 3905963

By Hilti

₹7,49,760   ₹10,04,168

You save ₹254,408!

25.34% OFF

The Hilti Epoxy Anchor (3905963) is a high-performance anchoring solution designed for structural applications in concrete and masonry. Engineered to withstand a temperature range of 5 to 25°C, this epoxy-based adhesive provides exceptional bonding strength, making it ideal for heavy-duty load applications in construction, infrastructure, and industrial projects. It offers superior resistance to dynamic loads, moisture, and chemical exposure, ensuring long-term durability and structural integrity.

Add to Cart Buy Now

Ships within 30 days

Fischer Cleaning Brush 25x300 mm, BS ø25

By Fischer

₹1,016  

The Fischer Cleaning Brush 25x300 mm, BS ø25 is an essential tool designed for cleaning and maintaining a variety of surfaces and equipment. Featuring durable bristles and a 25 mm diameter, this brush is perfect for cleaning anchor holes, pipes, or other hard-to-reach areas. Its 300 mm length ensures a thorough clean, allowing for optimal preparation of surfaces before applying adhesives, sealants, or anchors.Manufactured by the trusted Fischer brand, the Fischer Cleaning Brush 25x300 mm, BS ø25 is built for long-lasting use and superior performance. Ideal for both professional contractors and DIY enthusiasts, this brush helps ensure that surfaces are properly cleaned, promoting better adhesion and overall results. Whether you're working on construction, renovation, or maintenance projects, this cleaning brush is an indispensable tool for achieving clean and well-prepared surfaces.

Add to Cart Buy Now

Ships within 30 days

Fischer Construction Pro Silicone White 310 ml Cartridge, DBSA

By Fischer

Can of 310 ml

₹943 - ₹1,415

The Fischer Construction Pro Silicone White 310 ml Cartridge, DBSA, is a premium-grade, neutral-curing sealant designed for professional sealing applications in construction and industrial environments. It provides excellent adhesion to a wide range of materials, including glass, aluminium, ceramics, and coated metal surfaces, ensuring long-lasting and flexible joints. The silicone formula offers superior resistance to UV radiation, weathering, and temperature variations, making it ideal for both interior and exterior use. Its white finish delivers a clean, aesthetic appearance suitable for sealing joints in façades, windows, doors, and sanitary areas. The Fischer DBSA Construction Pro Silicone maintains elasticity even after curing, accommodating movement and preventing cracks or leaks over time. Easy to apply using a standard caulking gun, it ensures smooth, consistent sealing performance. Durable, reliable, and versatile, this silicone sealant is the perfect choice for professionals seeking high-quality joint sealing and weatherproofing in construction projects.

Type of Product : Construction Pro Silicone

Suitable For : Internal & External Use

Pack of : 1 Pc

Packaging Type : Cartridge

Language : DE, EN, FR

Volume : 310 ml

Usage For : Confined Spaces

Explore other Variants (2)

Ships within 30 days

Fischer Pu Dispenser Cleaner 500 ml Aerosol Can, PUR 500

By Fischer

Can of 500 ml

₹1,225  

The Fischer PU Dispenser Cleaner 500 ml Aerosol Can, PUR 500 is a highly effective solution for maintaining and cleaning foam dispensers. This powerful cleaner is specifically formulated to remove cured polyurethane foam from guns, nozzles, and other dispensing tools. With its 500 ml aerosol can, it provides ample volume for frequent use, making it ideal for both large-scale and smaller projects. The cleaner ensures your dispensing equipment remains in optimal condition, preventing blockages and ensuring smooth operation.Manufactured by the trusted Fischer brand, the Fischer PU Dispenser Cleaner is essential for extending the life of your foam dispensers and ensuring consistent, reliable performance. Whether you're working on sealing, insulation, or construction projects, this cleaner helps maintain tool efficiency by effectively dissolving cured foam. Its easy application and fast-acting formula make it a must-have for professionals and DIY enthusiasts alike.

Add to Cart Buy Now

Ships within 30 days

Fischer Pu Dispenser Cleaner 150 ml Aerosol Can, PUR 150

By Fischer

Can of 150 ml

₹746  

The Fischer PU Dispenser Cleaner 150 ml Aerosol Can, PUR 150 is an essential cleaning solution designed to keep your foam dispensers in top condition. This powerful cleaner effectively removes cured polyurethane foam residue from dispensing guns and nozzles, ensuring smooth operation and preventing clogs. The 150 ml aerosol can offers easy and precise application, making it convenient for both professional and DIY users to maintain their tools.Manufactured by the trusted Fischer brand, the Fischer PU Dispenser Cleaner is ideal for extending the life of your dispensing equipment and ensuring optimal performance. Whether you're working with foam dispensers for construction, insulation, or sealing, this cleaner helps maintain efficiency and prevents buildup. Its fast-acting formula ensures quick and effective cleaning, making it an essential tool for any project that uses polyurethane foam.

Add to Cart Buy Now

Ships within 30 days

Fischer Injection Mortar DE, EN, IT Language 360 Scale Unit, FIS RC II 360 S

By Fischer

₹3,688  

The Fischer Injection Mortar DE, EN, IT Language 360 Scale Unit, FIS RC II 360 S is a high-performance bonding solution designed for secure and durable anchoring in demanding environments. This injection mortar is ideal for use in concrete, brick, and masonry, providing reliable and strong adhesion for anchoring rods, bars, and other fixings. With a 360 ml scale unit, it ensures efficient and controlled application, making it perfect for both small and large construction projects that require precise results.Engineered by the trusted Fischer brand, the Fischer Injection Mortar FIS RC II 360 S offers superior resistance to moisture, chemicals, and temperature fluctuations, ensuring a lasting hold in various conditions. Whether you’re working on structural reinforcement, renovation, or installation tasks, this mortar delivers outstanding reliability and performance. It’s an essential solution for professionals who demand a high-quality, efficient product for their anchoring and fixing needs.

Add to Cart Buy Now

Ships within 30 days

Fischer Injection Mortar, FIS EB

By Fischer

₹3,893 - ₹5,781

The Fischer Injection Mortar FIS EB is a high-quality, epoxy-based chemical anchoring system designed for strong and reliable fixings in concrete, solid masonry, and natural stone. Formulated for heavy-duty applications, it provides exceptional bond strength, durability, and resistance to chemical and environmental influences. The two-component epoxy resin ensures precise mixing and consistent curing, resulting in a high load-bearing connection ideal for structural fixings. Suitable for use with Fischer anchor rods and rebar connections, the FIS EB offers a secure bond even under extreme loads and temperature conditions. Its extended working time allows for easy handling and precise alignment during installation, making it suitable for large or complex projects. The FIS EB Injection Mortar is ideal for anchoring steel structures, columns, railings, and façade systems where maximum safety and performance are required. Combining strength, precision, and reliability, Fischer FIS EB ensures long-term stability in demanding construction environments.

Type of Product : Injection Mortar

Suitable For : Fixing Heavy Loads Indoors & Outdoors

Pack of : 1 Pc

Packaging Type : Cartridge

Language : EN, ES, PT

Approval : ETA-Approval

Explore other Variants (2)

Previous Next

Page 1 of 1 results