• Home /
• All Brands /
• Algo

Have a question? Call us now at +91 9650660070

Algo Products Online

Showing 33 out of 33 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 7 days

Algo Waste Water Pump 2900 RPM with Cutter, SC (Power 0.5 to 10 HP)

By Algo

₹15,339 - ₹1,02,659

You save ₹4,278!

21.81% OFF

The Algo Waste Water Pump 2900 RPM with Cutter, SC is designed for wastewater handling applications where liquid movement may involve fibrous matter and other solids that can interfere with conventional pumping arrangements. Categorised under Dewatering Sump Pumps, this model features a cutter mechanism intended to break down suitable solid material before it passes through the pumping system. This function makes the cutter an important distinction when evaluating equipment for wastewater collection and removal tasks. With an operating speed of 2900 RPM, the pump has a defined technical specification for identification and system selection. Its application is relevant to suitable drainage installations, wastewater collection points and sump-based pumping arrangements where the characteristics of the liquid require careful consideration.In wastewater management setups, the Algo Waste Water Pump 2900 RPM with Cutter, SC combines liquid transfer with a cutting function to support the handling of appropriate wastewater mixtures. The cutter configuration distinguishes this model from standard wastewater pumps that do not incorporate a similar mechanism. Selection for a particular installation depends on factors such as the type and concentration of solids, liquid composition, discharge requirements and system compatibility. The 2900 RPM rating also provides a useful reference for equipment matching and technical catalogue comparisons. As an Algo product within the Dewatering Sump Pumps category, this model is identifiable for applications requiring wastewater pumping with a cutter-equipped configuration.

Cutter Blade : Stainless Steel

Cable Length : 8 Mtr

Impeller : High Chrome

Material : Cast Iron Pump Case

Frequency : 50 Hz

Type of Product : Waste Water Pump

Speed : 2900 RPM

Insulation Class : F Class

Product Series : Jawa

Protection : IP68

Explore other Variants (10)

Ships within 4 days

Algo Single Phase Heavy Self Priming Pump Booma

By Algo

₹9,793 - ₹10,855

The Algo Single Phase Heavy Self Priming Pump Booma is designed for water pumping applications where a single-phase electrical connection and self-priming pump configuration are required. Categorised under Domestic Monoblock Pump, this Algo model combines a practical pumping format with a design intended to assist water intake during suitable operating conditions. Its heavy-duty designation distinguishes it within the product range, making it relevant for installations where the specified pump type must align with regular water handling needs. The single-phase arrangement is an important consideration for electrical compatibility, while the self-priming feature relates to the pump’s ability to establish suction under appropriate installation conditions. These characteristics help define the product’s role in domestic water supply and transfer setups.For applications involving water movement between a source and a designated outlet, the Algo Single Phase Heavy Self Priming Pump Booma offers a clearly identified option within the Algo Domestic Monoblock Pump category. Its self-priming design is a key functional characteristic, although correct priming conditions, suction-line arrangement, and installation requirements remain important for operation. The pump’s suitability depends on factors such as water demand, required delivery height, pipe dimensions, and the available power supply. Its single-phase configuration should match the electrical connection at the intended location. The Booma model name identifies this particular pump in the Algo range, allowing its stated design and application requirements to be considered when selecting equipment for a compatible water pumping system.

Phase : Single Phase

Type of Product : Single Shower Booster Pump

Voltage : 220 V

Frequency : 50 Hz

Suction Size : 25 mm

Delivery Size : 25 mm

Series : Booma

Head Range : 6-24 m

Suc x Del (mm) : 25 x 25 mm

Delivery size (mm) : 25 mm

Flow Rate : 33-7 LPM

Features : Danfos Pressure Switch, T.O.P.

Explore other Variants (2)

Ships within 7 days

Algo 1 HP Single Phase Multistage Pump with Noryl Impeller ForZa-100

By Algo

₹21,239  

This is a Danfos Multistage with Noryl Impeller Centrifugal Pump 220/50Hz, Pressure Switch and Full Stainless Steel Construction. It is a high quality pump that provides long life with minimal maintenance. The power factor is 1 HP and operates at 60 RPM on both the single phase 230V or 208/120V. The frame is made of cast aluminium with brass material for impellers, high pressure valve and stainless steel screws. This model comes complete with a 5 way connector and strainer to protect your system from debris. Danfos Multistage Pump is specially designed for the pumping applications in where high temperature, corrosive or toxic liquid is required. It is able to carry out different functions as pressure boosting/recirculating, circulation, clean water and gas transfer. The multistage centrifugal pump is a centrifugal pump with multiple impellers arranged in stages inside a single casing.

Add to Cart Buy Now

Ships within 7 days

Algo Single Phase Multistage Pump PMS4 (Power 0.5 to 2 HP)

By Algo

₹24,779 - ₹63,719

The Algo Single Phase Multistage Pump PMS4 is designed for water pumping applications that require a multistage arrangement and single-phase electrical operation. Categorised under Vertical Multistage Pumps, this Algo pump is suited to systems where water needs to pass through successive pumping stages to achieve the required pressure conditions. Its vertical configuration provides a space-conscious installation format, making it relevant for equipment rooms, utility areas and water supply setups with limited floor space. The multistage design distinguishes this pump from conventional single-stage options by using multiple impeller stages to build pressure as water moves through the assembly. The PMS4 model is identifiable within Algo’s pumping equipment range for applications involving controlled water movement and pressure delivery.The Algo Single Phase Multistage Pump PMS4 can be considered for residential, commercial and light industrial water management systems, depending on the installation requirements and system specifications. Its single-phase power configuration makes it suitable for locations equipped with a compatible single-phase electrical supply. In vertical pumping arrangements, the compact structural layout helps organise equipment efficiently while supporting integration into water distribution networks. Typical application areas for vertical multistage pumps include pressure boosting, building water supply and other general-purpose water circulation duties. Selection and operation depend on factors such as required flow rate, delivery head, water characteristics and electrical compatibility. With its PMS4 model designation, Algo offers a pump option within the Vertical Multistage Pumps category for installations requiring multistage water pressure delivery.

Pump Size : 25x25 mm

Series : Press Mac

Voltage : 220 V

Frequency : 50 Hz

Phase : Single phase

Type of Product : Multistage Pump

Explore other Variants (6)

Related Searches

algo dewatering sump pumps

algo 125-515 lpm swimming pool pumps 4-18 m

algo domestic monoblock pump

algo 4-18 m swimming pool pumps

algo mud pump

Ships within 7 days

Algo Hynox Waste Water Pump 2900 RPM (Power 1 to 2 HP)

By Algo

₹27,139 - ₹43,659

The Algo Hynox Waste Water Pump 2900 RPM is designed for water removal applications where managing wastewater and accumulated liquid is an important part of routine operations. Categorised under Dewatering Sump Pumps, this Algo pump is suited to environments that require the transfer of water from collection points, sumps and areas affected by liquid accumulation. Its operating speed of 2900 RPM identifies a key specification for product selection and equipment matching. The pump's application-oriented design makes it relevant to dewatering requirements in suitable industrial, commercial and utility settings. When selecting a wastewater pump, factors such as liquid characteristics, installation conditions and system compatibility help determine its suitability for the intended task.With its focus on wastewater handling, the Algo Hynox Waste Water Pump 2900 RPM fits into pumping arrangements where collected water needs to be moved as part of maintenance or operational processes. It can be considered for appropriate sump installations and dewatering setups, depending on the site's pumping requirements and the specifications of the complete system. The Algo brand identification and 2900 RPM operating speed provide useful reference points for catalogue searches, technical comparisons and equipment identification. This pump belongs to the Dewatering Sump Pumps category, making it easier for buyers and maintenance teams to distinguish it from domestic water supply pumps and other pumping equipment intended for different applications.

Cable Length : 10 mtr

Material : Stainless steel

Series : Hynox

Frequency : 50 Hz

Type of Product : Waste Water Pump

Solid Passage : 25mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Material Grade : SS 304

Explore other Variants (5)

Ships within 7 days

Algo Hynox-NS Waste Water Pump 2900 RPM (Power 0.5 to 1.5 HP)

By Algo

₹12,979 - ₹15,339

The Algo Hynox Waste Water Pump 2900 RPM is designed for water removal applications where managing wastewater and accumulated liquid is an important part of routine operations. Categorised under Dewatering Sump Pumps, this Algo pump is suited to environments that require the transfer of water from collection points, sumps and areas affected by liquid accumulation. Its operating speed of 2900 RPM identifies a key specification for product selection and equipment matching. The pump's application-oriented design makes it relevant to dewatering requirements in suitable industrial, commercial and utility settings. When selecting a wastewater pump, factors such as liquid characteristics, installation conditions and system compatibility help determine its suitability for the intended task.With its focus on wastewater handling, the Algo Hynox Waste Water Pump 2900 RPM fits into pumping arrangements where collected water needs to be moved as part of maintenance or operational processes. It can be considered for appropriate sump installations and dewatering setups, depending on the site's pumping requirements and the specifications of the complete system. The Algo brand identification and 2900 RPM operating speed provide useful reference points for catalogue searches, technical comparisons and equipment identification. This pump belongs to the Dewatering Sump Pumps category, making it easier for buyers and maintenance teams to distinguish it from domestic water supply pumps and other pumping equipment intended for different applications.

Cable Length : 10 mtr

No. of Phases : 1 Phase

Material : Stainless steel

Series : Hynox

Voltage : 230 V

Frequency : 50 Hz

Phase : 1 Phase

Type of Product : Waste Water Pump

Solid Passage : 15mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Material Grade : SS 304

Del Size (inch) : 1.5"

Explore other Variants (3)

Ships within 7 days

Algo 3 Phase Waste Water Pump 2900 RPM, SD (Power 3 to 10 HP)

By Algo

₹29,499 - ₹88,499

The Algo 3 Phase Waste Water Pump 2900 RPM, SD is intended for wastewater transfer applications that require a three-phase power supply and a defined operating speed. Classified under the Dewatering Sump Pumps category, this model is relevant to installations where accumulated wastewater needs to be moved from collection areas to designated discharge points. Its three-phase configuration is an important consideration for facilities equipped with compatible electrical systems, while the 2900 RPM rating helps identify its operating specification during equipment selection. The pump's wastewater-focused application makes it suitable for consideration in appropriate industrial, commercial and utility environments. Factors such as liquid properties, installation layout and required flow conditions influence its suitability for a particular pumping task.For maintenance teams and equipment buyers, the Algo 3 Phase Waste Water Pump 2900 RPM, SD offers a clearly identified option for wastewater management and dewatering arrangements. Its three-phase designation distinguishes it from single-phase pump models, helping users assess electrical compatibility before installation. The 2900 RPM specification also supports technical identification when comparing equipment within the same category. Application requirements, discharge conditions and the characteristics of the wastewater should be considered when determining the correct pump for an installation. As an Algo product listed under Dewatering Sump Pumps, this model is intended for wastewater-related pumping duties where its electrical configuration and operating specifications align with the demands of the system.

Cable Length : 8 mtr

No. of Phases : 3 Phase

Series : Sendra

Voltage : 415 V

Frequency : 50 Hz

Phase : 3 Phase

Type of Product : Waste Water Pump

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Explore other Variants (6)

Ships within 7 days

Algo Waste Water Pump 2900 RPM, SV (Power 0.5 to 2 HP)

By Algo

₹15,339 - ₹21,239

The Algo Waste Water Pump 2900 RPM, SV is designed for wastewater movement in installations where accumulated liquid must be transferred as part of regular drainage and dewatering operations. Placed in the Dewatering Sump Pumps category, this Algo model is relevant to sump systems and designated wastewater collection points in suitable industrial and commercial environments. Its 2900 RPM operating speed provides a specific technical reference for equipment identification and selection. The SV model designation further helps distinguish this product within the Algo pump range. When assessing its application, users need to consider the nature of the wastewater, the required discharge arrangement and the operating conditions at the installation site to establish compatibility with the intended pumping duty.In facility maintenance and water management systems, the Algo Waste Water Pump 2900 RPM, SV can be evaluated for tasks involving the removal and transfer of collected wastewater. Its category classification helps buyers identify it separately from domestic water supply pumps and other equipment designed for different fluid-handling purposes. The stated rotational speed is useful when reviewing technical specifications and comparing pump models for a particular setup. Factors such as flow demand, discharge head, liquid composition and installation requirements remain relevant to equipment selection. With its distinct model identification, Algo branding and defined operating speed, this pump serves as a catalogue option for wastewater-related dewatering applications where the system requirements match its specifications.

Cable Length : 8 mtr

Series : Sendra

Frequency : 50 Hz

Type of Product : Waste Water Pump

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Explore other Variants (7)

Ships within 7 days

Algo Zingo 1 Phase Dewatering Pump 2900 RPM

By Algo

₹6,961 - ₹8,377

The Algo Zingo 1 Phase Dewatering Pump 2900 RPM is designed for water removal tasks in locations where a single-phase electrical supply is used. Classified under the Dewatering Sump Pumps category, this Algo pump is relevant to applications involving the evacuation of accumulated water from sumps, low-lying areas and suitable collection spaces. Its 2900 RPM operating speed provides a defined specification for identifying the equipment and assessing its compatibility with a pumping system. The single-phase configuration is a key selection factor for installations with matching electrical connections. By combining a clearly identified power arrangement with a designated operating speed, the pump can be evaluated for dewatering requirements in appropriate residential, commercial and light-duty service environments.For drainage and water management activities, the Algo Zingo 1 Phase Dewatering Pump 2900 RPM offers a product option for installations that require the transfer of collected water. Its single-phase designation distinguishes it from three-phase models, making the electrical supply an important part of equipment selection. The 2900 RPM rating also assists with technical identification when comparing products within the dewatering range. Suitability for a specific task depends on factors such as the required flow rate, discharge head, water conditions and installation arrangement. Bearing the Algo brand name and classified as a Dewatering Sump Pump, this model is identifiable for water removal applications where its operating specifications align with the requirements of the intended system.

Cable Length : 10 mtr

No. of Phases : 1 Phase

Series : Zingo

Voltage : 230 V

Frequency : 50 Hz

Phase : 1 Phase

Type of Product : Dewatering Pump

Solid Passage : 25mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Del Size (inch) : 1¼"

Explore other Variants (2)

Ships within 7 days

Algo Ronda Submersible Slurry Pump 2900 RPM (Power 0.5 to 8 HP)

By Algo

₹14,159 - ₹3,42,199

The Algo Ronda Submersible Slurry Pump 2900 RPM is designed for pumping applications involving slurry and liquid mixtures containing suspended solid particles, where suitable equipment selection is essential. Listed under the Dewatering Sump Pumps category, this pump is relevant to operations that involve managing liquid accumulation in sumps and designated collection areas. Its submersible configuration allows it to operate while positioned within the liquid being pumped, subject to the installation requirements of the equipment. The specified operating speed of 2900 RPM serves as an important reference when identifying the pump and matching it with the intended pumping arrangement. Its slurry-handling purpose distinguishes it from pumps primarily intended for transferring clean water.For industrial and site-based applications, the Algo Ronda Submersible Slurry Pump 2900 RPM is associated with liquid removal tasks where the composition of the pumped medium influences equipment suitability. Slurry concentration, particle characteristics, liquid compatibility and installation conditions are relevant considerations for selecting a pump for a particular duty. The submersible format is suited to installations where pumping takes place directly from a collection point rather than through a separate surface-mounted intake arrangement. With its defined product identity, brand and operating speed, this Algo pump can be identified within dewatering equipment catalogues for technical evaluation and application matching. It is categorised as a Dewatering Sump Pump for slurry-related liquid handling requirements.

Cable Length : 8 mtr

Series : Ronda

Frequency : 50 Hz

Type of Product : Submersible Slurry Pump

Solid Passage : 25mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Explore other Variants (7)

Ships within 7 days

Algo Simpo Swimming Pool Pump 2900 RPM (Power 0.5 to 4 HP)

By Algo

₹17,699 - ₹36,579

The Algo Simpo Swimming Pool Pump 2900 RPM is designed for water circulation in swimming pool systems, supporting the movement of water through connected pool plumbing and circulation equipment. Belonging to the Swimming Pool Pumps category, this Algo pump operates at a speed of 2900 RPM, making rotational speed a key specification when evaluating its suitability for pool water management requirements. Its dedicated application distinguishes it from pumps intended for domestic water supply, drainage, or other fluid-handling tasks. The product name identifies its Simpo series, brand, intended use, and operating speed, helping buyers recognise the pump while comparing equipment for swimming pool installations.For swimming pool maintenance setups, the Algo Simpo Swimming Pool Pump 2900 RPM serves as a water circulation component within the pool's pumping arrangement. It is relevant to installations where water needs to move between the pool and its connected circulation system as part of routine operation. Selection depends on the pool system's flow requirements, pipe configuration, and compatibility with associated filtration equipment. The 2900 RPM specification provides a clear reference point for assessing the pump against the operating requirements of the installation. With its defined swimming pool application and identifiable Simpo series designation, this Algo swimming pool pump can be evaluated for residential or other pool environments according to the technical specifications of the complete system.

Type of Product : Swimming Pool Pump

Head (m) : 4-18 m

Series : Simpo

Frequency : 50Hz

Flow Rate : 125-515 LPM

Head : 4-18 m

IP Protection : IP55

Speed : 2900 RPM

Class : F Class

Explore other Variants (11)

Ships within 7 days

Algo SURWA-H Non Clog Self Priming Pump (Power 1 to 60 HP)

By Algo

₹22,419 - ₹2,59,599

The Algo Fango Self Priming Mud Monoblock Pump, Fango is intended for pumping tasks that require the movement of muddy water and compatible liquids carrying suspended impurities. Classified under the Mud Pump category, this model combines self-priming functionality with a monoblock structure to support practical fluid handling in suitable working conditions. The integrated motor and pump assembly provides a unified arrangement, helping simplify equipment placement within an appropriate pumping setup. Its intended application makes it relevant for operations involving liquid mixtures where soil particles or mud may be present. The self-priming design assists in establishing suction when installation conditions and operating procedures meet the equipment's requirements, making suction setup an important consideration during use.Built around the demands of mud-related fluid transfer, the Algo Fango Self Priming Mud Monoblock Pump, Fango can be considered for suitable drainage activities, agricultural operations, and construction-related pumping tasks involving muddy water. The pump's suitability depends on the concentration and nature of suspended material, along with the required flow rate and suction conditions. Its monoblock configuration brings the principal pumping components together in one unit, providing a practical format for compatible installations. By focusing on the transfer of mud-laden liquids rather than clean water alone, this Algo pump serves a specific role in fluid management applications where choosing equipment according to liquid characteristics is essential.

Type of Product : Non Clog Self Priming Pump

Frequency : 50 Hz

Series : SURWA-H

Explore other Variants (13)

Ships within 7 days

Algo Fango Self Priming Mud Monoblock Pump, Fango (Power 2 to 7.5 HP)

By Algo

₹27,139 - ₹64,899

The Algo Fango Self Priming Mud Monoblock Pump, Fango is designed for fluid transfer applications involving muddy water and water containing suspended impurities, where conventional water pumps may not be suitable. Its self-priming configuration supports the process of establishing suction without requiring manual filling of the suction line during every normal startup, subject to the pump's operating requirements. The monoblock construction integrates the motor and pump into a compact assembly, making it relevant for installations where a combined pumping unit is preferred. As a product in the Mud Pump category, this Algo pump is intended for handling suitable mud-laden liquids in applicable pumping environments.The Algo Fango Self Priming Mud Monoblock Pump, Fango is relevant to selected agricultural, construction, maintenance, and general fluid-handling tasks that involve muddy water or similar liquids within the equipment's specified operating limits. Its integrated design provides a practical arrangement for routine pumping operations, while the self-priming feature supports convenient startup when the installation conditions are appropriate. Selection should be based on the liquid characteristics, required discharge, suction lift, and other application-specific parameters. With its dedicated mud-pumping purpose and monoblock configuration, this Algo pump serves as a functional option for users seeking equipment designed around the demands of transferring mud-containing liquids.

Type of Product : Self Priming Mud Monoblock Pump

Frequency : 50 Hz

Series : Fango

Explore other Variants (6)

Ships within 7 days

Algo Fango K Self Priming Mud Monoblock Pump, FangoK (Power 0.5 to 7.5 HP)

By Algo

₹17,699 - ₹75,519

The Algo Fango Self Priming Mud Monoblock Pump, Fango is developed for pumping applications that involve muddy water and other suitable liquids containing suspended particles. Designed within the Mud Pump category, this equipment addresses fluid movement requirements in settings where water may carry soil, silt, or similar contaminants. Its self-priming mechanism assists with establishing suction under suitable installation conditions, while the monoblock arrangement combines the motor and pumping unit into a single assembly. This configuration provides a consolidated design for handling specific fluid transfer tasks without requiring separately arranged motor and pump units. The Fango model is intended for applications where the nature of the liquid makes selecting an appropriate mud-handling pump an important consideration.Suitable applications for the Algo Fango Self Priming Mud Monoblock Pump, Fango may include site drainage, agricultural water movement, and other operations involving mud-laden water, provided the liquid composition remains within the pump's operating specifications. Its functional design supports pumping tasks in environments where suspended solids may be present, making liquid compatibility an essential factor during equipment selection. The integrated construction also offers a straightforward arrangement for installation within an appropriate pumping system. Performance depends on factors such as suction conditions, fluid properties, discharge requirements, and installation setup. This Algo mud pump is suited to users evaluating dedicated equipment for moving muddy liquids in practical working environments.

Type of Product : Self Priming Mud Monoblock Pump

Speed : 2850 RPM

Frequency : 50 Hz

Series : Fango K

Explore other Variants (9)

Ships within 7 days

Algo Domestic Monoblock Pump 20 HP Three Phase 1440 RPM, MGHF-200 (Head Range: 28 - 76 m)

By Algo

₹94,399 - ₹95,579

The Algo Domestic Monoblock Pump 20 HP Three Phase 1440 RPM, MGHF-200 is specified for water pumping installations that require a 20 HP motor with a rated rotational speed of 1440 RPM. Its monoblock format integrates the motor and pump into one assembly, creating a unified unit for suitable water circulation, transfer, and supply systems. The three-phase electrical configuration is a defining specification that must correspond with the site's power connection. With a 20 HP rating, this model is identifiable as a higher-power variant within the Algo Domestic Monoblock Pump range. The MGHF-200 model code distinguishes it from other configurations, while its stated motor capacity and speed provide essential technical references for evaluating equipment requirements in water handling applications.Planning a pumping installation involves matching equipment parameters with the hydraulic demands of the system. The Algo Domestic Monoblock Pump 20 HP Three Phase 1440 RPM, MGHF-200 offers a defined combination of motor power, electrical arrangement, and rotational speed for this assessment. Factors such as the required flow rate, delivery head, pipe network, and operating conditions influence its suitability for a particular setup. The three-phase supply must meet the unit's electrical requirements, and installation planning should account for the system's intended workload. Its integrated motor-and-pump construction provides a consolidated equipment arrangement for compatible applications. Listed under the Algo brand and Domestic Monoblock Pump category, the MGHF-200 is identified by its 20 HP rating and 1440 RPM specification.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 20 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 15 kW

Explore other Variants (3)

Ships within 7 days

Algo Domestic Monoblock Pump 15 HP Three Phase 1440 RPM, MGHF-150 (Head Range: 20 - 76 m)

By Algo

₹84,959 - ₹86,139

The Algo Domestic Monoblock Pump 15 HP Three Phase 1440 RPM, MGHF-150 is designed for water pumping systems that specify a 15 HP motor and a rated speed of 1440 RPM. The monoblock construction combines the motor and pump into a single equipment assembly, creating an integrated format for suitable water transfer and supply installations. Its three-phase electrical arrangement is an essential specification for matching the unit with the available power infrastructure. With a 15 HP motor rating, the MGHF-150 is distinguished by its defined power capacity within the Algo Domestic Monoblock Pump category. The model code and operating specifications help identify this variant when reviewing equipment requirements for systems that need a particular combination of motor power and rotational speed.In water pumping applications, selecting a unit involves assessing the expected workload alongside the hydraulic characteristics of the installation. The Algo Domestic Monoblock Pump 15 HP Three Phase 1440 RPM, MGHF-150 provides a clear specification profile for this evaluation, featuring 15 HP motor capacity, three-phase operation, and a speed of 1440 RPM. Its suitability depends on the required water discharge, delivery head, pipeline resistance, and site conditions. Electrical supply compatibility must also be established before installation. The combined motor-and-pump arrangement gives the equipment a unified configuration for integration into an appropriate system. As an Algo Domestic Monoblock Pump, the MGHF-150 can be assessed according to the operational demands and technical parameters of the intended water handling application.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 15 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 11 kW

Explore other Variants (4)

Ships within 7 days

Algo Domestic Monoblock Pump 12.5 HP Three Phase 1440 RPM, MGHF-125 (Head Range: 18 - 52 m)

By Algo

₹75,519 - ₹76,699

The Algo Domestic Monoblock Pump 12.5 HP Three Phase 1440 RPM, MGHF-125 is specified for pumping installations that require a 12.5 HP motor operating at 1440 RPM. Its monoblock design brings the motor and pumping components together within one assembly, creating an integrated unit for compatible water handling systems. The three-phase configuration defines the electrical supply requirement and is an important consideration when assessing installation compatibility. With a 12.5 HP motor rating, the MGHF-125 is differentiated by its power specification within the Algo Domestic Monoblock Pump range. This combination of motor capacity, rotational speed, and model identification helps establish its technical profile for applications involving water movement, where equipment selection must reflect the intended system's operating demands.For pumping equipment assessment, the Algo Domestic Monoblock Pump 12.5 HP Three Phase 1440 RPM, MGHF-125 provides a defined set of specifications for comparison with installation requirements. The 12.5 HP rating is relevant when evaluating motor capacity, while the 1440 RPM speed identifies its rotational operating parameter. The pump's practical suitability depends on factors including required water flow, delivery head, pipe configuration, and site conditions. A compatible three-phase electrical connection is also necessary for the specified setup. Its integrated construction offers a combined motor-and-pump format for suitable installations. Identified under the Algo brand and Domestic Monoblock Pump category, the MGHF-125 can be assessed according to the hydraulic and electrical requirements of the intended application.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 12.5 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 9.3 kW

Explore other Variants (3)

Ships within 7 days

Algo Domestic Monoblock Pump 10 HP Three Phase 1440 RPM, MGHF-100 (Head Range: 22 - 64 m)

By Algo

₹53,099 - ₹58,999

The Algo Domestic Monoblock Pump 10 HP Three Phase 1440 RPM, MGHF-100 is a pumping solution specified for installations requiring a 10 HP motor with a rotational speed of 1440 RPM. Its integrated monoblock construction combines the pumping mechanism and motor in a single unit, forming a consolidated arrangement for compatible water handling applications. Designed with a three-phase electrical configuration, this model requires consideration of the site's power supply during equipment selection. The 10 HP rating distinguishes the MGHF-100 from lower-powered variants in the Algo Domestic Monoblock Pump range. Its defined motor capacity and speed provide useful reference points for evaluating the unit against water transfer requirements in residential, commercial, or other suitable installations, subject to the system's technical specifications.When planning a pumping system, the relationship between water demand and equipment capacity plays an important role in selecting an appropriate unit. The Algo Domestic Monoblock Pump 10 HP Three Phase 1440 RPM, MGHF-100 offers a specified combination of 10 HP motor power, three-phase operation, and 1440 RPM speed for technical evaluation. Required discharge, delivery head, pipe dimensions, and installation conditions determine whether its configuration matches a particular application. The electrical connection must also correspond to the available supply and operating requirements. Its combined motor-and-pump structure provides a single assembly for integration into a compatible setup. As an Algo product in the Domestic Monoblock Pump category, the MGHF-100 is identified by its model code and stated specifications for equipment comparison.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 10 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 7.5 kW

Explore other Variants (4)

Ships within 7 days

Algo Domestic Monoblock Pump 7.5 HP Three Phase 1440 RPM, MGHF-75 (Head Range: 16 - 46 m)

By Algo

₹50,739 - ₹55,459

The Algo Domestic Monoblock Pump 7.5 HP Three Phase 1440 RPM, MGHF-75 is designed for water pumping installations that specify a 7.5 HP motor and an operating speed of 1440 RPM. Its monoblock arrangement combines the motor and pump in one integrated assembly, providing a consolidated equipment configuration for compatible water handling systems. The three-phase electrical design is a key consideration when determining whether the unit matches the power supply at the installation site. With its 7.5 HP rating, this model represents a higher-capacity option within the Algo Domestic Monoblock Pump range. The MGHF-75 model designation helps identify its particular power and speed configuration when comparing pump specifications for planned water supply or transfer applications.Equipment selection for water pumping requires attention to the relationship between motor power and the hydraulic demands of the system. The Algo Domestic Monoblock Pump 7.5 HP Three Phase 1440 RPM, MGHF-75 provides defined specifications for this assessment, including its 7.5 HP motor capacity, three-phase connection, and 1440 RPM speed. Application suitability depends on the required flow rate, delivery head, pipeline layout, and operating environment. Electrical compatibility and installation conditions are also relevant to its use. The integrated pump-and-motor format offers a single-unit configuration for suitable setups, while the MGHF-75 identification distinguishes this variant from models with different power ratings. This Algo Domestic Monoblock Pump can be evaluated against the technical requirements of the intended water management system.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 7.5 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 5.5 kW

Explore other Variants (5)

Ships within 7 days

Algo Domestic Monoblock Pump 5 HP Three Phase 1440 RPM, MGHF-50 (Head Range: 8 - 52 m)

By Algo

₹34,219 - ₹35,399

The Algo Domestic Monoblock Pump 5 HP Three Phase 1440 RPM, MGHF-50 is a water pumping unit specified for applications requiring a 5 HP motor and a rotational speed of 1440 RPM. Its monoblock design integrates the motor and pump into a single assembly, providing a unified equipment format for suitable water movement systems. The three-phase configuration defines an important electrical requirement when planning installation and operation. With a 5 HP rating, this model is intended for consideration in pumping arrangements where the required capacity aligns with the system’s operating needs. The MGHF-50 model code identifies this particular configuration within the Algo Domestic Monoblock Pump range, helping differentiate it from alternatives with lower motor ratings or other technical specifications.Motor capacity, rotational speed, and electrical supply are central considerations when evaluating the Algo Domestic Monoblock Pump 5 HP Three Phase 1440 RPM, MGHF-50 for a water handling setup. Its 1440 RPM rating provides a defined operating parameter for equipment selection, while the 5 HP motor specification helps establish its place within the range. The pump’s suitability depends on factors such as the required discharge, vertical delivery height, pipe diameter, and overall installation conditions. The three-phase supply must also match the site’s electrical arrangement. As an Algo product in the Domestic Monoblock Pump category, the MGHF-50 offers a clearly identified specification profile for assessment against the demands of compatible water transfer and supply applications.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 5 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 3.7 kW

Explore other Variants (5)

Ships within 7 days

Algo Domestic Monoblock Pump 3 HP Three Phase 1440 RPM, MGHF-30 (Head Range: 10 - 32 m)

By Algo

₹25,959 - ₹27,139

The Algo Domestic Monoblock Pump 3 HP Three Phase 1440 RPM, MGHF-30 is engineered around a 3 HP motor and a rated operating speed of 1440 RPM for compatible water pumping applications. Its monoblock configuration brings the motor and pump together in one assembly, creating a consolidated unit for installation in suitable water supply systems. The three-phase electrical design is a key specification for facilities with a matching power connection. With its 3 HP capacity, this model can be considered for pumping duties where the required motor power must correspond to the system's water handling demands. The MGHF-30 model forms part of the Algo Domestic Monoblock Pump category, offering clearly defined specifications that distinguish it from other variants in the range.For water distribution and transfer setups, the Algo Domestic Monoblock Pump 3 HP Three Phase 1440 RPM, MGHF-30 provides a specific combination of motor capacity, electrical configuration, and rotational speed. Operating at 1440 RPM, it differs from pump models designed around higher speed ratings, making speed an important factor during equipment comparison. Its application should be assessed against the required flow rate, delivery head, pipeline dimensions, and site conditions. The three-phase supply must also align with the available electrical infrastructure. As an Algo branded Domestic Monoblock Pump, the MGHF-30 can be evaluated for installations requiring a 3 HP pumping unit, with final suitability determined by the technical demands of the intended system.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 3 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 2.2 kW

Explore other Variants (4)

Ships within 7 days

Algo Domestic Monoblock Pump 2 HP Three Phase 1440 RPM, MGHF-20 (Head Range: 6 - 32 m)

By Algo

₹20,059 - ₹23,599

The Algo Domestic Monoblock Pump 2 HP Three Phase 1440 RPM, MGHF-20 is a water pumping unit designed for installations requiring a 2 HP motor with a rated rotational speed of 1440 RPM. Its integrated construction combines the pump and motor within one assembly, creating a consolidated arrangement for compatible water supply and transfer systems. The three-phase electrical configuration makes power supply compatibility an important part of installation planning. With its 2 HP rating, this model occupies a distinct position among pumping units with different motor capacities. The MGHF-20 identification helps distinguish this variant within the Algo Domestic Monoblock Pump category, making it suitable for evaluation according to the intended workload, required water movement, and technical specifications of the installation.When assessing pumping equipment for a specific water handling setup, the Algo Domestic Monoblock Pump 2 HP Three Phase 1440 RPM, MGHF-20 offers defined parameters for technical comparison. Its motor capacity and 1440 RPM operating speed are useful reference points when matching a pump to the demands of a system. The three-phase design must correspond with the available electrical connection, while the required discharge rate, delivery head, and pipeline arrangement influence application suitability. The monoblock format brings the motor and pumping mechanism together as a single unit, supporting a coordinated installation layout. As an Algo branded Domestic Monoblock Pump, the MGHF-20 can be evaluated for compatible water transfer requirements based on its stated specifications and the operating conditions at the site.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 2 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 1.5 kW

Explore other Variants (7)

Ships within 7 days

Algo Domestic Monoblock Pump 1.5 HP Three Phase 1440 RPM, MGHF-15 (Head Range: 6 - 28 m)

By Algo

₹16,519 - ₹17,699

The Algo Domestic Monoblock Pump 1.5 HP Three Phase 1440 RPM, MGHF-15 is designed for water pumping requirements that call for a 1.5 HP motor operating at 1440 RPM. Its integrated monoblock construction houses the motor and pump as a combined unit, providing a coordinated arrangement for compatible domestic water supply and transfer applications. The three-phase electrical design is an essential specification for installations with a matching power source. With its defined motor capacity and rotational speed, the MGHF-15 offers a distinct option within the Algo Domestic Monoblock Pump range. These specifications help identify the model when comparing pumping equipment for systems with particular operating demands, making motor power and speed relevant factors in assessing its intended use.For water pumping setups where a 1.5 HP unit is specified, the Algo Domestic Monoblock Pump 1.5 HP Three Phase 1440 RPM, MGHF-15 provides a clear reference for evaluating equipment compatibility. The 1440 RPM operating speed is relevant to performance assessment, while the three-phase configuration determines the required electrical connection. Its suitability for a particular installation depends on the desired water discharge, delivery head, pipework design, and site conditions. The single-unit motor-and-pump arrangement offers a consolidated equipment format for suitable applications. As a product from Algo under the Domestic Monoblock Pump category, the MGHF-15 can be assessed against the technical and operational requirements of the intended water handling system.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 1.5 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 2.2 kW

Explore other Variants (5)

Ships within 7 days

Algo Domestic Monoblock Pump 1 HP Three Phase 1440 RPM, MGHF-10 (Head Range: 7 - 30 m)

By Algo

₹11,563 - ₹12,979

The Algo Domestic Monoblock Pump 1 HP Three Phase 1440 RPM, MGHF-10 is designed for water pumping applications requiring a 1 HP motor with a rated rotational speed of 1440 RPM. Its integrated monoblock arrangement combines the motor and pump within a single assembly, providing a unified format for compatible domestic water handling systems. The three-phase electrical configuration is an important specification when assessing installation requirements and power supply compatibility. With its defined motor capacity and operating speed, this model can be evaluated for water transfer duties that match its technical capabilities. The MGHF-10 designation identifies this particular variant in the Algo Domestic Monoblock Pump category, helping distinguish it from models with different power ratings and operating specifications.When selecting a 1 HP pumping unit, the Algo Domestic Monoblock Pump 1 HP Three Phase 1440 RPM, MGHF-10 offers clearly defined parameters for evaluating its role in a water supply arrangement. The 1440 RPM speed is relevant when comparing equipment with different operating characteristics, while the three-phase design determines the required electrical connection. Application suitability depends on the intended water flow, delivery height, pipeline resistance, and installation conditions. Its combined motor-and-pump construction provides a single equipment unit for an appropriate setup. As an Algo branded Domestic Monoblock Pump, the MGHF-10 can be assessed against the actual requirements of the intended pumping system using its specified power rating and rotational speed.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 1 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 0.75 kW

Explore other Variants (4)

Ships within 7 days

Algo Domestic Monoblock Pump 0.5 HP Three Phase 1440 RPM, MGHF-05

By Algo

₹7,197 - ₹8,731

The Algo Domestic Monoblock Pump 0.5 HP Three Phase 1440 RPM, MGHF-05 is a compact pumping unit designed for water handling tasks that call for a 0.5 HP motor and a rated speed of 1440 RPM. Its monoblock construction combines the motor and pump in one assembly, providing an integrated format for suitable domestic water pumping installations. The three-phase electrical configuration is a key specification for ensuring compatibility with the site's power supply. With its defined motor capacity and moderate rotational speed, this model can be considered for applications where pumping equipment is selected according to specific flow and delivery requirements. The MGHF-05 model belongs to the Algo Domestic Monoblock Pump range and is identified by its 0.5 HP rating and operating speed.For installations requiring a lower-power pumping unit, the Algo Domestic Monoblock Pump 0.5 HP Three Phase 1440 RPM, MGHF-05 provides clearly stated specifications for equipment assessment. Its 1440 RPM operation and three-phase supply requirement are relevant when planning the electrical and mechanical aspects of a pumping setup. The actual application depends on the required water discharge, delivery head, pipe layout, and operating conditions. The combined motor-and-pump arrangement offers a unified unit for compatible systems, while the electrical connection must meet the model's requirements. As an Algo branded Domestic Monoblock Pump, the MGHF-05 can be evaluated for appropriate water transfer duties by matching its stated characteristics with the needs of the installation.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 0.5 HP

Speed : 1440 RPM

Insulation Class : F

Power Rating : 0.37 kW

Explore other Variants (2)

Ships within 7 days

Algo Domestic Monoblock Pump Three Phase 1440 RPM, MGS (Head Range: 7 - 18 m)

By Algo

₹33,039 - ₹63,719

The Algo Domestic Monoblock Pump Three Phase 1440 RPM, MGS is designed for water pumping installations that require a monoblock unit operating at a specified speed of 1440 RPM. Its integrated construction brings the motor and pump together in a single assembly, creating a consolidated arrangement for compatible water handling applications. The three-phase electrical configuration is an important consideration when matching the equipment to the available power supply. Unlike models specified at higher rotational speeds, this variant is identified by its 1440 RPM operating speed, which is a relevant parameter when assessing pumping requirements. As part of the Algo Domestic Monoblock Pump category, the MGS model can be evaluated according to the water movement demands, installation layout, and operating conditions of the intended application.For equipment selection, the Algo Domestic Monoblock Pump Three Phase 1440 RPM, MGS offers two clearly stated identifying features: its three-phase power configuration and its 1440 RPM speed rating. These details help distinguish the model when comparing pump specifications for suitable domestic and general water transfer systems. Its practical application depends on the required discharge rate, delivery head, pipeline dimensions, and compatibility with the site's electrical infrastructure. The monoblock arrangement keeps the motor and pumping mechanism within one unit, supporting a unified installation format. Reviewing these technical factors helps determine whether the MGS model aligns with the operational requirements of a particular water pumping setup.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Speed : 1440 RPM

Insulation Class : A

Explore other Variants (5)

Ships within 7 days

Algo Domestic Monoblock Pump 20 HP Three Phase 2900 RPM, MGH-20 (Head Range: 32 - 90 m)

By Algo

₹1,05,019 - ₹1,05,019

The Algo Domestic Monoblock Pump 20 HP Three Phase 2900 RPM, MGH-20 is a high-power water pumping unit designed for applications requiring a 20 HP motor operating at 2900 RPM. Its monoblock configuration integrates the pump and motor into a single assembly, providing a combined unit for installation in compatible water pumping systems. The three-phase electrical arrangement is a defining specification that must match the site's available power supply. With its 20 HP motor rating, this model is suited for evaluation in pumping setups where the required equipment capacity is determined by water demand and system operating conditions. The MGH-20 model belongs to the Algo Domestic Monoblock Pump category, with its power rating and rotational speed serving as key identifiers for technical selection.When planning a water pumping installation, the Algo Domestic Monoblock Pump 20 HP Three Phase 2900 RPM, MGH-20 offers specific operating details to consider alongside the system's hydraulic requirements. The 20 HP capacity and 2900 RPM speed help define the pump's intended operating profile, while the three-phase configuration establishes its electrical connection requirements. Appropriate application depends on factors such as the required water flow, total delivery head, pipe dimensions, and installation layout. The integrated motor-and-pump format provides a consolidated equipment arrangement for compatible applications. As an Algo branded pumping unit, the MGH-20 can be assessed for water transfer duties by matching its stated specifications with the demands of the intended system.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 20 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 15 kW

Explore other Variants (3)

Ships within 7 days

Algo Domestic Monoblock Pump 15 HP Three Phase 2900 RPM, MGH-15 (Head Range: 24 - 70 m)

By Algo

₹88,499 - ₹90,859

The Algo Domestic Monoblock Pump 15 HP Three Phase 2900 RPM, MGH-15 is a high-power pumping unit specified for water movement applications requiring a 15 HP motor and a rotational speed of 2900 RPM. Its monoblock design combines the motor and pump in one assembly, creating an integrated arrangement for installation in compatible pumping systems. The three-phase power configuration is a key consideration when planning electrical connections and selecting suitable operating equipment. With its defined power rating, this model can be evaluated for water supply and transfer duties according to the capacity demands of the installation. The MGH-15 identification distinguishes this variant within the Algo Domestic Monoblock Pump range, making its motor power and operating speed central factors in equipment selection.For projects that specify a 15 HP pumping unit, the Algo Domestic Monoblock Pump 15 HP Three Phase 2900 RPM, MGH-15 provides a clearly identified combination of motor capacity, electrical supply type, and operating speed. These specifications are relevant when assessing compatibility with the planned water distribution arrangement. The actual suitability of the pump depends on the required discharge rate, delivery head, pipework, and site operating conditions. Its integrated motor-and-pump construction offers a consolidated equipment format, while the three-phase requirement must correspond with the available electrical connection. As a product from the Algo brand under the Domestic Monoblock Pump category, the MGH-15 can be assessed against the technical demands of the intended water pumping application.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 15 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 11 kW

Explore other Variants (3)

Ships within 7 days

Algo Domestic Monoblock Pump 12.5 HP Three Phase 2900 RPM, MGH-12 (Head Range: 24 - 76 m)

By Algo

₹79,059 - ₹82,599

The Algo Domestic Monoblock Pump 12.5 HP Three Phase 2900 RPM, MGH-12 is a high-power pumping unit designed for water handling applications that require a 12.5 HP motor and a rotational speed of 2900 RPM. Its integrated monoblock construction combines the motor and pump into a single assembly, providing a unified equipment arrangement for suitable pumping installations. The three-phase electrical configuration is an important specification for planning its connection to a compatible power supply. With its defined motor rating and operating speed, this model can be evaluated for water transfer duties that demand equipment matched to specific performance requirements. The MGH-12 model belongs to the Algo Domestic Monoblock Pump category and is distinguished by its stated power capacity.For pumping systems where motor capacity is a primary selection factor, the Algo Domestic Monoblock Pump 12.5 HP Three Phase 2900 RPM, MGH-12 offers clearly identified technical specifications for evaluation. Its 12.5 HP rating, three-phase supply, and 2900 RPM speed help establish the basic parameters for matching the equipment to an intended application. Performance suitability depends on factors including the required water discharge, delivery head, pipeline layout, and installation conditions. The monoblock arrangement provides a consolidated motor-and-pump format, while the electrical requirements must align with the available infrastructure. As an Algo branded pumping unit, the MGH-12 can be assessed for compatible domestic and general water transfer requirements based on the actual demands of the system.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 12.5 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 9.3 kW

Explore other Variants (4)

Ships within 7 days

Algo Domestic Monoblock Pump 10 HP Three Phase 2900 RPM, MGH-10 (Head Range: 22 - 72 m)

By Algo

₹58,999 - ₹61,359

The Algo Domestic Monoblock Pump 10 HP Three Phase 2900 RPM, MGH-10 is a high-capacity pumping unit specified for applications requiring a 10 HP motor and an operating speed of 2900 RPM. Its monoblock design integrates the motor and pump into one assembly, offering a consolidated arrangement for water pumping installations. The three-phase configuration is suited to compatible electrical systems and forms an essential part of the model's technical specification. With its 10 HP power rating, this Algo pump is intended for consideration in water transfer applications where the required pumping capacity must align with the demands of the installation. The MGH-10 designation helps distinguish this model within the Domestic Monoblock Pump category.When evaluating pumping equipment for a particular setup, the Algo Domestic Monoblock Pump 10 HP Three Phase 2900 RPM, MGH-10 offers specific parameters for technical assessment. Its motor power and rotational speed are important factors in determining compatibility with the intended water delivery system. The pump's suitability depends on the required discharge volume, total head, pipeline configuration, and operating conditions. Its three-phase supply requirement must also correspond with the electrical infrastructure at the installation site. As part of Algo's Domestic Monoblock Pump range, this model can be considered for appropriate water movement duties where a 10 HP pumping unit is specified. Reviewing these characteristics supports an informed equipment selection based on actual system requirements.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 10 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 7.5 kW

Explore other Variants (6)

Ships within 7 days

Algo Domestic Monoblock Pump 7.5 HP Three Phase 2900 RPM, MGH-7 (Head Range: 16 - 50 m)

By Algo

₹54,279 - ₹54,279

The Algo Domestic Monoblock Pump 7.5 HP Three Phase 2900 RPM, MGH-7 is designed for pumping requirements that call for a 7.5 HP motor and high-speed operation at 2900 RPM. Its monoblock construction brings the motor and pump together as an integrated unit, creating a unified setup for suitable water handling applications. The three-phase electrical design is a defining feature of this model and should be matched with the power supply available at the installation site. With its specified motor capacity, the MGH-7 is relevant to water transfer tasks where equipment selection depends on power rating, rotational speed, and system requirements. These characteristics make it identifiable within the Algo Domestic Monoblock Pump range.For installations requiring a pump with a 7.5 HP rating, the Algo Domestic Monoblock Pump 7.5 HP Three Phase 2900 RPM, MGH-7 provides clearly defined technical parameters for evaluating application suitability. Its 2900 RPM operating speed and three-phase configuration are important considerations when planning a compatible pumping arrangement. The model can be assessed for appropriate domestic and general water transfer duties by examining the required flow rate, delivery head, pipe dimensions, and operating conditions. The integrated monoblock format also keeps the motor and pump within a single assembly. Considering these specifications alongside the intended workload helps determine whether the MGH-7 matches the practical demands of the proposed water pumping system.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 7.5 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 5.5 kW

Explore other Variants (5)

Ships within 7 days

Algo Domestic Monoblock Pump 5 HP Three Phase 2900 RPM, MGH-5 (Head Range: 8 - 44 m)

By Algo

₹42,479 - ₹43,659

The Algo Domestic Monoblock Pump 3 HP Three Phase 2900 RPM, MGH-3 is designed for water pumping applications that require a 3 HP motor and consistent rotational speed. Operating at 2900 RPM with a three-phase power supply, this pump is suited to compatible domestic water transfer and general-purpose pumping requirements. Its monoblock configuration integrates the motor and pump assembly into a single unit, providing a compact arrangement for installation where space and equipment layout are important considerations. The MGH-3 model combines its specified power rating, electrical configuration, and operating speed to support everyday water movement tasks in suitable residential and utility settings.As part of the Algo range of Domestic Monoblock Pumps, this model offers a practical option for users selecting pumping equipment according to motor capacity and supply requirements. The 3 HP rating makes it relevant for applications where a pump with this power specification is needed, while the three-phase design determines its electrical connection requirements. The 2900 RPM operating speed is another key specification for identifying the appropriate equipment for a particular installation. The Algo Domestic Monoblock Pump 3 HP Three Phase 2900 RPM, MGH-3 can be evaluated for compatible water transfer duties by considering the required flow rate, delivery head, installation conditions, and available electrical supply. These specifications help buyers assess its suitability for their intended pumping setup.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 5 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 3.7 kW

Explore other Variants (5)

Ships within 7 days

Algo Domestic Monoblock Pump 3 HP Three Phase 2900 RPM, MGH-3 (Head Range: 8 - 26 m)

By Algo

₹31,859 - ₹33,039

The Algo Domestic Monoblock Pump 3 HP Three Phase 2900 RPM, MGH-3 is designed for water pumping applications that require a 3 HP motor and consistent rotational speed. Operating at 2900 RPM with a three-phase power supply, this pump is suited to compatible domestic water transfer and general-purpose pumping requirements. Its monoblock configuration integrates the motor and pump assembly into a single unit, providing a compact arrangement for installation where space and equipment layout are important considerations. The MGH-3 model combines its specified power rating, electrical configuration, and operating speed to support everyday water movement tasks in suitable residential and utility settings.As part of the Algo range of Domestic Monoblock Pumps, this model offers a practical option for users selecting pumping equipment according to motor capacity and supply requirements. The 3 HP rating makes it relevant for applications where a pump with this power specification is needed, while the three-phase design determines its electrical connection requirements. The 2900 RPM operating speed is another key specification for identifying the appropriate equipment for a particular installation. The Algo Domestic Monoblock Pump 3 HP Three Phase 2900 RPM, MGH-3 can be evaluated for compatible water transfer duties by considering the required flow rate, delivery head, installation conditions, and available electrical supply. These specifications help buyers assess its suitability for their intended pumping setup.

Phase : Three Phase

Type of Product : Domestic Monoblock Pump

Voltage : 415 V

Frequency : 50 Hz

Power : 3 HP

Speed : 2900 RPM

Insulation Class : A

Power Rating : 2.2 kW

Explore other Variants (3)

Previous Next

Page 1 of 1 results