Have a question? Call us now at +91 9650660070

care@industrybuying.com

Algo Sewage Pumps

Showing 10 out of 10 products

Sort by

Algo 0.5 HP 0.37Kw Waste Water Pump with Cutter SC-06/03S

Ships within 7 days

Algo Waste Water Pump 2900 RPM with Cutter, SC (Power 0.5 to 10 HP)

By Algo

₹15,339 - ₹1,02,659

You save ₹4,278!

21.81% OFF

The Algo Waste Water Pump 2900 RPM with Cutter, SC is designed for wastewater handling applications where liquid movement may involve fibrous matter and other solids that can interfere with conventional pumping arrangements. Categorised under Dewatering Sump Pumps, this model features a cutter mechanism intended to break down suitable solid material before it passes through the pumping system. This function makes the cutter an important distinction when evaluating equipment for wastewater collection and removal tasks. With an operating speed of 2900 RPM, the pump has a defined technical specification for identification and system selection. Its application is relevant to suitable drainage installations, wastewater collection points and sump-based pumping arrangements where the characteristics of the liquid require careful consideration.In wastewater management setups, the Algo Waste Water Pump 2900 RPM with Cutter, SC combines liquid transfer with a cutting function to support the handling of appropriate wastewater mixtures. The cutter configuration distinguishes this model from standard wastewater pumps that do not incorporate a similar mechanism. Selection for a particular installation depends on factors such as the type and concentration of solids, liquid composition, discharge requirements and system compatibility. The 2900 RPM rating also provides a useful reference for equipment matching and technical catalogue comparisons. As an Algo product within the Dewatering Sump Pumps category, this model is identifiable for applications requiring wastewater pumping with a cutter-equipped configuration.

Cutter Blade : Stainless Steel

Cable Length : 8 Mtr

Impeller : High Chrome

Material : Cast Iron Pump Case

Frequency : 50 Hz

Type of Product : Waste Water Pump

Speed : 2900 RPM

Insulation Class : F Class

Product Series : Jawa

Protection : IP68

Algo Hynox-30T 3 Phase Waste Water Pump 2.2 KW

Ships within 7 days

Algo Hynox Waste Water Pump 2900 RPM (Power 1 to 2 HP)

By Algo

₹27,139 - ₹43,659

The Algo Hynox Waste Water Pump 2900 RPM is designed for water removal applications where managing wastewater and accumulated liquid is an important part of routine operations. Categorised under Dewatering Sump Pumps, this Algo pump is suited to environments that require the transfer of water from collection points, sumps and areas affected by liquid accumulation. Its operating speed of 2900 RPM identifies a key specification for product selection and equipment matching. The pump's application-oriented design makes it relevant to dewatering requirements in suitable industrial, commercial and utility settings. When selecting a wastewater pump, factors such as liquid characteristics, installation conditions and system compatibility help determine its suitability for the intended task.With its focus on wastewater handling, the Algo Hynox Waste Water Pump 2900 RPM fits into pumping arrangements where collected water needs to be moved as part of maintenance or operational processes. It can be considered for appropriate sump installations and dewatering setups, depending on the site's pumping requirements and the specifications of the complete system. The Algo brand identification and 2900 RPM operating speed provide useful reference points for catalogue searches, technical comparisons and equipment identification. This pump belongs to the Dewatering Sump Pumps category, making it easier for buyers and maintenance teams to distinguish it from domestic water supply pumps and other pumping equipment intended for different applications.

Cable Length : 10 mtr

Material : Stainless steel

Series : Hynox

Frequency : 50 Hz

Type of Product : Waste Water Pump

Solid Passage : 25mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Material Grade : SS 304

Algo Hynox-15NS 1 Phase Waste Water Pump 1.1 KW

Ships within 7 days

Algo Hynox-NS Waste Water Pump 2900 RPM (Power 0.5 to 1.5 HP)

By Algo

₹12,979 - ₹15,339

Cable Length : 10 mtr

No. of Phases : 1 Phase

Material : Stainless steel

Series : Hynox

Voltage : 230 V

Frequency : 50 Hz

Phase : 1 Phase

Type of Product : Waste Water Pump

Solid Passage : 15mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Material Grade : SS 304

Del Size (inch) : 1.5"

Algo SD-A0/G75T 3 Phase Waste Water Pump 7.5 KW

Ships within 7 days

Algo 3 Phase Waste Water Pump 2900 RPM, SD (Power 3 to 10 HP)

By Algo

₹29,499 - ₹88,499

The Algo 3 Phase Waste Water Pump 2900 RPM, SD is intended for wastewater transfer applications that require a three-phase power supply and a defined operating speed. Classified under the Dewatering Sump Pumps category, this model is relevant to installations where accumulated wastewater needs to be moved from collection areas to designated discharge points. Its three-phase configuration is an important consideration for facilities equipped with compatible electrical systems, while the 2900 RPM rating helps identify its operating specification during equipment selection. The pump's wastewater-focused application makes it suitable for consideration in appropriate industrial, commercial and utility environments. Factors such as liquid properties, installation layout and required flow conditions influence its suitability for a particular pumping task.For maintenance teams and equipment buyers, the Algo 3 Phase Waste Water Pump 2900 RPM, SD offers a clearly identified option for wastewater management and dewatering arrangements. Its three-phase designation distinguishes it from single-phase pump models, helping users assess electrical compatibility before installation. The 2900 RPM specification also supports technical identification when comparing equipment within the same category. Application requirements, discharge conditions and the characteristics of the wastewater should be considered when determining the correct pump for an installation. As an Algo product listed under Dewatering Sump Pumps, this model is intended for wastewater-related pumping duties where its electrical configuration and operating specifications align with the demands of the system.

Cable Length : 8 mtr

No. of Phases : 3 Phase

Series : Sendra

Voltage : 415 V

Frequency : 50 Hz

Phase : 3 Phase

Type of Product : Waste Water Pump

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Related Searches

algo dewatering sump pumps

Algo SV-15/D15T 3 Phase Waste Water Pump 1.5 KW

Ships within 7 days

Algo Waste Water Pump 2900 RPM, SV (Power 0.5 to 2 HP)

By Algo

₹15,339 - ₹21,239

The Algo Waste Water Pump 2900 RPM, SV is designed for wastewater movement in installations where accumulated liquid must be transferred as part of regular drainage and dewatering operations. Placed in the Dewatering Sump Pumps category, this Algo model is relevant to sump systems and designated wastewater collection points in suitable industrial and commercial environments. Its 2900 RPM operating speed provides a specific technical reference for equipment identification and selection. The SV model designation further helps distinguish this product within the Algo pump range. When assessing its application, users need to consider the nature of the wastewater, the required discharge arrangement and the operating conditions at the installation site to establish compatibility with the intended pumping duty.In facility maintenance and water management systems, the Algo Waste Water Pump 2900 RPM, SV can be evaluated for tasks involving the removal and transfer of collected wastewater. Its category classification helps buyers identify it separately from domestic water supply pumps and other equipment designed for different fluid-handling purposes. The stated rotational speed is useful when reviewing technical specifications and comparing pump models for a particular setup. Factors such as flow demand, discharge head, liquid composition and installation requirements remain relevant to equipment selection. With its distinct model identification, Algo branding and defined operating speed, this pump serves as a catalogue option for wastewater-related dewatering applications where the system requirements match its specifications.

Cable Length : 8 mtr

Series : Sendra

Frequency : 50 Hz

Type of Product : Waste Water Pump

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Algo Zingo-10 1 Phase Dewatering Pump 0.75 KW

Ships within 7 days

Algo Zingo 1 Phase Dewatering Pump 2900 RPM

By Algo

₹6,961 - ₹8,377

The Algo Zingo 1 Phase Dewatering Pump 2900 RPM is designed for water removal tasks in locations where a single-phase electrical supply is used. Classified under the Dewatering Sump Pumps category, this Algo pump is relevant to applications involving the evacuation of accumulated water from sumps, low-lying areas and suitable collection spaces. Its 2900 RPM operating speed provides a defined specification for identifying the equipment and assessing its compatibility with a pumping system. The single-phase configuration is a key selection factor for installations with matching electrical connections. By combining a clearly identified power arrangement with a designated operating speed, the pump can be evaluated for dewatering requirements in appropriate residential, commercial and light-duty service environments.For drainage and water management activities, the Algo Zingo 1 Phase Dewatering Pump 2900 RPM offers a product option for installations that require the transfer of collected water. Its single-phase designation distinguishes it from three-phase models, making the electrical supply an important part of equipment selection. The 2900 RPM rating also assists with technical identification when comparing products within the dewatering range. Suitability for a specific task depends on factors such as the required flow rate, discharge head, water conditions and installation arrangement. Bearing the Algo brand name and classified as a Dewatering Sump Pump, this model is identifiable for water removal applications where its operating specifications align with the requirements of the intended system.

Cable Length : 10 mtr

No. of Phases : 1 Phase

Series : Zingo

Voltage : 230 V

Frequency : 50 Hz

Phase : 1 Phase

Type of Product : Dewatering Pump

Solid Passage : 25mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Del Size (inch) : 1¼"

Algo Ronda-120 3 Phase Submersible Slurry Pump 9 KW

Ships within 7 days

Algo Ronda Submersible Slurry Pump 2900 RPM (Power 0.5 to 8 HP)

By Algo

₹14,159 - ₹3,42,199

The Algo Ronda Submersible Slurry Pump 2900 RPM is designed for pumping applications involving slurry and liquid mixtures containing suspended solid particles, where suitable equipment selection is essential. Listed under the Dewatering Sump Pumps category, this pump is relevant to operations that involve managing liquid accumulation in sumps and designated collection areas. Its submersible configuration allows it to operate while positioned within the liquid being pumped, subject to the installation requirements of the equipment. The specified operating speed of 2900 RPM serves as an important reference when identifying the pump and matching it with the intended pumping arrangement. Its slurry-handling purpose distinguishes it from pumps primarily intended for transferring clean water.For industrial and site-based applications, the Algo Ronda Submersible Slurry Pump 2900 RPM is associated with liquid removal tasks where the composition of the pumped medium influences equipment suitability. Slurry concentration, particle characteristics, liquid compatibility and installation conditions are relevant considerations for selecting a pump for a particular duty. The submersible format is suited to installations where pumping takes place directly from a collection point rather than through a separate surface-mounted intake arrangement. With its defined product identity, brand and operating speed, this Algo pump can be identified within dewatering equipment catalogues for technical evaluation and application matching. It is categorised as a Dewatering Sump Pump for slurry-related liquid handling requirements.

Cable Length : 8 mtr

Series : Ronda

Frequency : 50 Hz

Type of Product : Submersible Slurry Pump

Solid Passage : 25mm

IP Protection : IP68

Speed : 2900 RPM

Class : F Class

Algo SURWA-H Non Clog Self Priming Pump, SURWA-H 200/600-4

Ships within 7 days

Algo SURWA-H Non Clog Self Priming Pump (Power 1 to 60 HP)

By Algo

₹23,599 - ₹2,71,399

The Algo Fango Self Priming Mud Monoblock Pump, Fango is intended for pumping tasks that require the movement of muddy water and compatible liquids carrying suspended impurities. Classified under the Mud Pump category, this model combines self-priming functionality with a monoblock structure to support practical fluid handling in suitable working conditions. The integrated motor and pump assembly provides a unified arrangement, helping simplify equipment placement within an appropriate pumping setup. Its intended application makes it relevant for operations involving liquid mixtures where soil particles or mud may be present. The self-priming design assists in establishing suction when installation conditions and operating procedures meet the equipment's requirements, making suction setup an important consideration during use.Built around the demands of mud-related fluid transfer, the Algo Fango Self Priming Mud Monoblock Pump, Fango can be considered for suitable drainage activities, agricultural operations, and construction-related pumping tasks involving muddy water. The pump's suitability depends on the concentration and nature of suspended material, along with the required flow rate and suction conditions. Its monoblock configuration brings the principal pumping components together in one unit, providing a practical format for compatible installations. By focusing on the transfer of mud-laden liquids rather than clean water alone, this Algo pump serves a specific role in fluid management applications where choosing equipment according to liquid characteristics is essential.

Type of Product : Non Clog Self Priming Pump

Frequency : 50 Hz

Series : SURWA-H

Algo Fango Self Priming Mud Monoblock Pump Three Phase, Fango-7580T

Ships within 7 days

Algo Fango Self Priming Mud Monoblock Pump, Fango (Power 2 to 7.5 HP)

By Algo

₹28,319 - ₹68,439

The Algo Fango Self Priming Mud Monoblock Pump, Fango is designed for fluid transfer applications involving muddy water and water containing suspended impurities, where conventional water pumps may not be suitable. Its self-priming configuration supports the process of establishing suction without requiring manual filling of the suction line during every normal startup, subject to the pump's operating requirements. The monoblock construction integrates the motor and pump into a compact assembly, making it relevant for installations where a combined pumping unit is preferred. As a product in the Mud Pump category, this Algo pump is intended for handling suitable mud-laden liquids in applicable pumping environments.The Algo Fango Self Priming Mud Monoblock Pump, Fango is relevant to selected agricultural, construction, maintenance, and general fluid-handling tasks that involve muddy water or similar liquids within the equipment's specified operating limits. Its integrated design provides a practical arrangement for routine pumping operations, while the self-priming feature supports convenient startup when the installation conditions are appropriate. Selection should be based on the liquid characteristics, required discharge, suction lift, and other application-specific parameters. With its dedicated mud-pumping purpose and monoblock configuration, this Algo pump serves as a functional option for users seeking equipment designed around the demands of transferring mud-containing liquids.

Type of Product : Self Priming Mud Monoblock Pump

Frequency : 50 Hz

Series : Fango

Algo Fango K Self Priming Mud Monoblock Pump Three Phase, FangoK-7580T

Ships within 7 days

Algo Fango K Self Priming Mud Monoblock Pump, FangoK (Power 0.5 to 7.5 HP)

By Algo

₹17,699 - ₹79,059

The Algo Fango Self Priming Mud Monoblock Pump, Fango is developed for pumping applications that involve muddy water and other suitable liquids containing suspended particles. Designed within the Mud Pump category, this equipment addresses fluid movement requirements in settings where water may carry soil, silt, or similar contaminants. Its self-priming mechanism assists with establishing suction under suitable installation conditions, while the monoblock arrangement combines the motor and pumping unit into a single assembly. This configuration provides a consolidated design for handling specific fluid transfer tasks without requiring separately arranged motor and pump units. The Fango model is intended for applications where the nature of the liquid makes selecting an appropriate mud-handling pump an important consideration.Suitable applications for the Algo Fango Self Priming Mud Monoblock Pump, Fango may include site drainage, agricultural water movement, and other operations involving mud-laden water, provided the liquid composition remains within the pump's operating specifications. Its functional design supports pumping tasks in environments where suspended solids may be present, making liquid compatibility an essential factor during equipment selection. The integrated construction also offers a straightforward arrangement for installation within an appropriate pumping system. Performance depends on factors such as suction conditions, fluid properties, discharge requirements, and installation setup. This Algo mud pump is suited to users evaluating dedicated equipment for moving muddy liquids in practical working environments.

Type of Product : Self Priming Mud Monoblock Pump

Speed : 2850 RPM

Frequency : 50 Hz

Series : Fango K

Page 1 of 1 results