• Home /
• All Brands /
• All India Steel and Engg

Have a question? Call us now at +91 9650660070

All India Steel and Engg

Showing 40 out of 50 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 2 days

All India Steel and Engg Silver Concentric Reducer SCH 10 40NB x 25NB

By All India Steel and Engg

₹188  

The concentric reducer is designed to reduce the flow of water to a specific point. It is made of stainless steel, and is available in different sizes. The concentric reducer is used in various industrial applications such as food processing and dairy plants, paper manufacturing, oil refineries and chemical plants. The concentric reducer can be used in irrigation systems, sprinkler systems, and drip irrigation systems. It provides a precise reduction in flow rates at a specific point within the pipe line. The concentric reducer can also be used for reducing pressure in water lines as well as gas lines. The concentric reducer has a unique construction that allows it to withstand higher pressures than most other types of valves. They are often used in high pressure applications where other valves would not be strong enough to withstand the stress involved. The concentric reducer is made out of stainless steel so it does not rust or corrode like other types of valves would over time due to their exposure to harsh environments and chemicals that could cause them harm if they were not made from stainless steel. This is the most common standard reducer in the field of gas and water supply. It is used for the connection between two pipes of different diameters. It can also be used as a bushing to create a permanent seal between two pipes, or as a stop to prevent the loss of fluid by creating a vacuum when it comes into contact with another section of pipe.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Barrel Nipple NPT Thread 15NB 12.7 mm(1/2Inch)

By All India Steel and Engg

₹176  

Barrel Nipple is a pipe fitting that connects pipe to other fittings or valves. The pipe nipple is made of brass and can be used in residential and commercial plumbing. Barrel nipples are available in different diameters and lengths, with various thread types. They are used as connectors between pipes and faucets, showers or toilets. The most common sizes include 1/2 inch and 3/4 inch. The threaded end of the barrel nipple is called male thread, while the opposite end has female threads. A barrel nipple can also be known as a reducer, reducer bushing or male adapter. A reducer bushing has two male threads on each side of its body, which allows it to connect two pipes together with different diameters or materials. The barrel nipple is used to connect the tubing from the pump to the irrigation line. It comes with a 15mm barb, but can be cut down to fit smaller barbs. This item is sold individually and does not come with any additional hardware or fittings. Barrel nipple is a pipe fitting that is used to connect the pipe to another pipe. It is used in plumbing and other applications where it needs to be fixed permanently or semi permanently. The barrel nipple helps to make the connection between two pipes with different diameters.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Flange 16.5 150 Sorf x 12THK 15NB

By All India Steel and Engg

₹435  

Flanges are manufactured in accordance with ANSI B 16.5 and they can be used as an integral part of the piping system or as a connector between two pipes. The flange is a pressure-tight connection between two components such as pipes, valves, tanks and other equipment. Flanges are designed in various shapes and sizes according to their application. They are made of materials like carbon steel, stainless steel, cast iron etc. Flanges are available in metric and imperial dimensions. The flange face is generally flat or domed in shape with a hole for bolting the flange onto another pipe or fitting. flanges have male threads on one end and female threads on the other end. Slip-on flanges are commonly used for low-pressure applications such as water lines and air lines where there is no need for high-strength connections. Slip-on flanges are also commonly used with cast iron pipe systems because they do not require welding which can cause porosity problems in cast iron pipes during heating cycles in the manufacturing facilitie. Flanges are used in building and piping systems, and are also used on cylinders. A flange can also be a ring-shaped object, typically circular in cross-section but sometimes oval or rectangular. Flanges may have holes or slots through them to accommodate Nuts or bolts. Sometimes flanges are made by bending sheet metal.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver End Cap SCH 10S

By All India Steel and Engg

₹306 - ₹2,359

Stainless Steel 316 End Cap, For Pipe Fitting Stainless steel end caps are used with stainless steel pipe fittings to seal off the ends of pipe lines and tubes. The end caps are threaded at both ends, allowing them to be screwed onto either side of a fitting. Stainless steel is an excellent material for use in plumbing applications because it is resistant to corrosion and rusting. It also has high strength and durability, which means that it can withstand the stress of being used in high-pressure environments without breaking down or weakening over time. End cap fittings are often used in conjunction with other types of plumbing materials to create a variety of different types of pipes and tubes. These fittings can be attached directly onto the end of any type of pipe or tube without requiring additional tools or hardware for installation. Applications: Used on tubing and pipe fittings to finish off the end of the pipe or tube. If a pipe fitting has internal threads (such as a male) it will screw into another piece of pipe or tubing with external threads (such as a female.) If a pipe fitting has external threads (such as a female) it will screw into another piece of pipe or tubing with internal threads (such as a male.)

Type of Product : End Cap

Color : Silver

Wall Thickness : SCH 10S

Explore other Variants (3)

Related Searches

all india steel and engg metal pipe fittings

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 10 15NB

By All India Steel and Engg

₹65  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Female Socket NPT Thread

By All India Steel and Engg

₹66 - ₹97

Socket is a fitting that is used to connect the pipe or tube to another object. The size of the socket is matched with the size of the pipe or tube. It is made from metal, plastic or other materials. Sockets are also used in plumbing and electrical fittings, such as faucets and electrical outlets. Sockets are used to connect pipes and tubes to each other. The sockets are manufactured for various sizes of pipes and tubes so that they can fit easily into each other without any leakage. The screw threads on both sides of the socket are designed for tightening and loosening purposes so that there will be no leakage when you tighten it properly. A socket can be made of different materials like metal, plastic or rubber etc., depending on its usage purpose and the requirements of consumers There are different types of sockets available in the market according to their uses like NPT thread, BSP thread etc., The socket shown above is a standard NPT/BSP thread. It is used to connect water pipes to faucets and other fixtures. The NPT/BSP stands for National Pipe Thread Female Socket NPT Thread is a female socket with NPT thread. It is usually made of brass or bronze and can be used for different purposes such as water supply, gas supply, medical supply, etc. The female socket NPT thread has a smooth surface which makes it easy for install and removal of the components. The female socket NPT thread is also available in different sizes and shapes to suit different uses.

Type of Product : Female Socket

Material : Stainless Steel

Color : Silver

Explore other Variants (3)

Ships within 2 days

All India Steel and Engg Silver Equal Tee 100 NB x Min. 204mm Full Side

By All India Steel and Engg

₹1,769  

Equal Tee is a type of fitting used for joining of pipes. The equal tee is a pipe fitting that is used to connect three pipes at the same level. It is also known as a cross, T-shaped or equal branch Tee. The equal tee is the most common type of tee in the plumbing industry and can be used for both hot and cold water supply systems. The equal tee has three outlets from which water can flow out from three directions. This means that an equal tee will allow you to split one flow into three separate flows. The main function of this fitting is to provide an even distribution of water among three outlets by using it as a branching point in your plumbing system. The size of each outlet on an equal tee depends on its size and model number but they are all standardized so that they can fit together easily without having any issues regarding compatibility. The offered tees are made using premium grade stainless steel under the guidance of our skilled professionals by utilizing advanced techniques in accordance with international quality standards. Besides, our clients can avail these SS 316 Equal Tee at market-leading prices from us.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver 150Cl Std 100NB Standard Sorf MS Flange

By All India Steel and Engg

₹1,132  

Standard SORF flanges are manufactured in accordance with ANSI B16.5, ASME B16.47 and other similar standards. They are available in both ANSI and ASME sizes, and can be made with either blind or weld neck flange ends. Standard SORF flanges are typically.The flange is a key component of a bolted assembly and the pressure rating is determined by the material used for the flange body. Standard SORF flanges are commonly used for industrial applications such as oil and gas, power generation, water treatment, waste management, pulp & paper, food processing and many more industries that require high pressure applications. Flanges are available in an extensive range of materials, including carbon steel and stainless steel alloys. Carbon steel flanges are used most often because they are less expensive than stainless steel flanges. Carbon steel flanges also have excellent strength characteristics. However, they are susceptible to corrosion if not properly protected with paint or other protective coating. MS Flange is a kind of metal flange, and it is also called MS flange, which is a kind of metal flange. Its material is usually carbon steel, stainless steel or alloy steel. The flanges are used in piping systems and provide a means of connecting piping components. They are designed to accommodate different types of joints, including threaded, bolted and welded. MS Flanges are available in different types and sizes to meet the requirements for different applications and industrie

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 10 65 NB

By All India Steel and Engg

₹601  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 05 150 NB

By All India Steel and Engg

₹3,893  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Concentric Reducer SCH 05 200NB x 80NB

By All India Steel and Engg

₹2,831  

The concentric reducer is designed to reduce the flow of water to a specific point. It is made of stainless steel, and is available in different sizes. The concentric reducer is used in various industrial applications such as food processing and dairy plants, paper manufacturing, oil refineries and chemical plants. The concentric reducer can be used in irrigation systems, sprinkler systems, and drip irrigation systems. It provides a precise reduction in flow rates at a specific point within the pipe line. The concentric reducer can also be used for reducing pressure in water lines as well as gas lines. The concentric reducer has a unique construction that allows it to withstand higher pressures than most other types of valves. They are often used in high pressure applications where other valves would not be strong enough to withstand the stress involved. The concentric reducer is made out of stainless steel so it does not rust or corrode like other types of valves would over time due to their exposure to harsh environments and chemicals that could cause them harm if they were not made from stainless steel. This is the most common standard reducer in the field of gas and water supply. It is used for the connection between two pipes of different diameters. It can also be used as a bushing to create a permanent seal between two pipes, or as a stop to prevent the loss of fluid by creating a vacuum when it comes into contact with another section of pipe.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Stub End SCH 10,50NB x Min. 63.5mm

By All India Steel and Engg

₹294  

Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The stub end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Stub Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost-effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide an extensive range of Stub Ends at affordable prices with superior quality standards. Stub ends come in many different sizes and materials. Choosing the right stub end for your project will ensure that it fits properly and does not leak. Stub Ends are made from high-quality materials like hardened steel and carbide, which make them durable enough to last for years. They come with either smooth or serrated edges depending on your preferences. There are many uses for stub ends in your home repair projects and industrial work. You can use them for cutting off bolts, screws, nuts and other fasteners without damaging them or stripping their threads. Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Stub End SCH 10,65NB x Min. 63.5mm

By All India Steel and Engg

₹376  

Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The stub end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Stub Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost-effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Stub ends come in many different sizes and materials. Choosing the right stub end for your project will ensure that it fits properly and does not leak. Stub Ends are made from high-quality materials like hardened steel and carbide, which make them durable enough to last for years. They come with either smooth or serrated edges depending on your preferences. There are many uses for stub ends in your home repair projects and industrial work. You can use them for cutting off bolts, screws, nuts and other fasteners without damaging them or stripping their threads. Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Stub End SCH 10,100NB x Min. 76.2mm

By All India Steel and Engg

₹660  

Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The stub end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Stub Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Stub ends come in many different sizes and materials. Choosing the right stub end for your project will ensure that it fits properly and does not leak. Stub Ends are made from high-quality materials like hardened steel and carbide, which make them durable enough to last for years. They come with either smooth or serrated edges depending on your preferences. There are many uses for stub ends in your home repair projects and industrial work. You can use them for cutting off bolts, screws, nuts and other fasteners without damaging them or stripping their threads. Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Stub End SCH 10 200NB x Min.101.6mm

By All India Steel and Engg

₹2,359  

Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The stub end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Stub Ends are made from high-quality materials like hardened steel and carbide, which make them durable enough to last for years. They come with either smooth or serrated edges depending on your preferences. There are many uses for stub ends in your home repair projects and industrial work. You can use them for cutting off bolts, screws, nuts and other fasteners without damaging them or stripping their threads. Stub Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost-effectiveness, ease of installation, and flexibility in joining different sizes of pipes together. We provide an extensive range of Stub Ends at affordable prices with superior quality standards. Stub ends come in many different sizes and materials. Choosing the right stub end for your project will ensure that it fits properly and does not leak. STUB END SCH 10 , 200NB X MIN.101.6 MM LG Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Full Tread NPT Female Socket Cl 32NB

By All India Steel and Engg

₹1,132  

The full tread NPT female socket CL, 32NB fitting is used to join pipes of other sizes and materials by means of a threaded joint in the same manner as a male plug would. The CL fitting design allows for easy installation and removal of the fitting by hand and is typically used where pressure ratings are not required. The fitting is available in stainless steel, carbon steel, and ductile iron. Our product is a female socket that is used in the chemical industry. The fitting is an Equal Tee, which means it has two female sockets and two male pipings. It is made of stainless steel that has been polished, which gives the product a silver color. The material's surface finish is Polished. This product is used in piping systems with chemicals in them. The socket is designed to be used in conjunction with the standard NPT nipple or the NPSM fitting. Each female socket connector is forged from SAE stainless steel material for superior durability and resistance to corrosion. For added protection, the socket has been finished with a polished surface for a professional appearance. This type of female threaded connector features a cone-shaped seat with internal threads that allow it to lock onto a male NPT fitting. It has a circular face with an opening sized so that it can accept any size pipe or tubing that fits within its limits. The circular face has a hole in its center so that it can be connected to other devices or systems through its center opening.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 10 25 NB

By All India Steel and Engg

₹152  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 10 40 NB

By All India Steel and Engg

₹235  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 05 50 NB

By All India Steel and Engg

₹317  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 10 80 NB

By All India Steel and Engg

₹719  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 10 100 NB

By All India Steel and Engg

₹1,651  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 05 200 NB

By All India Steel and Engg

₹6,725  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Elbow SCH 05 250 NB

By All India Steel and Engg

₹14,159  

Elbow 316 Stainless Steel Elbow, Material Grade: Ss 316 Elbow is a pipe fitting that has two different ends. In the middle of the pipe, there is a 90 degree angle which allows two pipes to connect. It can also be used in other areas such as plumbing and heating systems. There are many types of elbows available on the market today, but they all serve the same purpose. Stainless steel elbow has a high resistance to corrosion and are used in water supply lines and drain lines. They are made from 316 stainless steel which gives them their corrosion resistant properties. These fittings come with a smooth interior wall, so they will not scratch or rust over time like other types of elbows do. This makes them ideal for use in areas where there will be constant contact with water or other liquids that could corrode metal surfaces over time. Elbows are used in the construction of pipe systems to make turns and changes in direction. They are made from a variety of materials including cast iron, malleable iron, brass and stainless steel. The elbow is a hinge joint that allows flexion and extension, as well as some degree of rotation. In addition, the elbow joint has ligaments that provide stability to the joint while allowing it to move freely.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Eccentric Reducer SCH 05 250NB x 100NB

By All India Steel and Engg

₹5,073  

Eccentric Reducer SCH 05 is a type of reducer that can be used to reduce the flow of water and other liquids in piping systems. This piece of equipment is commonly found in plumbing systems, but it is also used in many other industries as well. It is important for anyone who works with this type of equipment to have a good understanding of how it works so they can use it safely and efficiently. Eccentric Reducer is a type of reducer which is used in the field of plumbing. It helps to reduce the flow of water coming into the pipe and at the same time, it helps to increase the pressure of water. These are made up of cast iron or brass material and are very durable. How does an eccentric reducer work An eccentric reducer allows for the flow of liquids through pipes to be controlled by rotating a valve, rather than using a valve that opens or closes like one would with a normal pipe fitting. This means that there are no moving parts inside the pipe when using this piece of equipment, which makes it extremely reliable and easy to use. The first thing that happens when you turn on your faucet is that water travels through your pipes until it reaches the end where there is an eccentric reducer installed. At this point, water will continue flowing until the next piece of piping begins to restrict its flow because of its size or shape

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Eccentric Reducer SCH 05 100NB x 65NB

By All India Steel and Engg

₹1,769  

Eccentric Reducer SCH 05 is a type of reducer that can be used to reduce the flow of water and other liquids in piping systems. This piece of equipment is commonly found in plumbing systems, but it is also used in many other industries as well. It is important for anyone who works with this type of equipment to have a good understanding of how it works so they can use it safely and efficiently. Eccentric Reducer is a type of reducer which is used in the field of plumbing. It helps to reduce the flow of water coming into the pipe and at the same time, it helps to increase the pressure of water. These are made up of cast iron or brass material and are very durable. How does an eccentric reducer work An eccentric reducer allows for the flow of liquids through pipes to be controlled by rotating a valve, rather than using a valve that opens or closes like one would with a normal pipe fitting. This means that there are no moving parts inside the pipe when using this piece of equipment, which makes it extremely reliable and easy to use. The first thing that happens when you turn on your faucet is that water travels through your pipes until it reaches the end where there is an eccentric reducer installed. At this point, water will continue flowing until the next piece of piping begins to restrict its flow because of its size or shape

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Eccentric Reducer SCH 05 50NB x 25NB

By All India Steel and Engg

₹435  

Eccentric Reducer SCH 05 is a type of reducer that can be used to reduce the flow of water and other liquids in piping systems. This piece of equipment is commonly found in plumbing systems, but it is also used in many other industries as well. It is important for anyone who works with this type of equipment to have a good understanding of how it works so they can use it safely and efficiently. Eccentric Reducer is a type of reducer which is used in the field of plumbing. It helps to reduce the flow of water coming into the pipe and at the same time, it helps to increase the pressure of water. These are made up of cast iron or brass material and are very durable. How does an eccentric reducer work An eccentric reducer allows for the flow of liquids through pipes to be controlled by rotating a valve, rather than using a valve that opens or closes like one would with a normal pipe fitting. This means that there are no moving parts inside the pipe when using this piece of equipment, which makes it extremely reliable and easy to use. The first thing that happens when you turn on your faucet is that water travels through your pipes until it reaches the end where there is an eccentric reducer installed. At this point, water will continue flowing until the next piece of piping begins to restrict its flow because of its size or shape

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Eccentric Reducer SCH 05 50NB x 40NB

By All India Steel and Engg

₹612  

Eccentric Reducer SCH 05 is a type of reducer that can be used to reduce the flow of water and other liquids in piping systems. This piece of equipment is commonly found in plumbing systems, but it is also used in many other industries as well. It is important for anyone who works with this type of equipment to have a good understanding of how it works so they can use it safely and efficiently. Eccentric Reducer is a type of reducer which is used in the field of plumbing. It helps to reduce the flow of water coming into the pipe and at the same time, it helps to increase the pressure of water. These are made up of cast iron or brass material and are very durable. How does an eccentric reducer work An eccentric reducer allows for the flow of liquids through pipes to be controlled by rotating a valve, rather than using a valve that opens or closes like one would with a normal pipe fitting. This means that there are no moving parts inside the pipe when using this piece of equipment, which makes it extremely reliable and easy to use. The first thing that happens when you turn on your faucet is that water travels through your pipes until it reaches the end where there is an eccentric reducer installed. At this point, water will continue flowing until the next piece of piping begins to restrict its flow because of its size or shape

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Eccentric Reducer SCH 05 200NB x 150NB

By All India Steel and Engg

₹2,949  

Eccentric Reducer SCH 05 is a type of reducer that can be used to reduce the flow of water and other liquids in piping systems. This piece of equipment is commonly found in plumbing systems, but it is also used in many other industries as well. It is important for anyone who works with this type of equipment to have a good understanding of how it works so they can use it safely and efficiently. Eccentric Reducer is a type of reducer which is used in the field of plumbing. It helps to reduce the flow of water coming into the pipe and at the same time, it helps to increase the pressure of water. These are made up of cast iron or brass material and are very durable. How does an eccentric reducer work An eccentric reducer allows for the flow of liquids through pipes to be controlled by rotating a valve, rather than using a valve that opens or closes like one would with a normal pipe fitting. This means that there are no moving parts inside the pipe when using this piece of equipment, which makes it extremely reliable and easy to use. The first thing that happens when you turn on your faucet is that water travels through your pipes until it reaches the end where there is an eccentric reducer installed. At this point, water will continue flowing until the next piece of piping begins to restrict its flow because of its size or shape

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Concentric Reducer SCH 05 80NB x 40NB

By All India Steel and Engg

₹518  

The concentric reducer is designed to reduce the flow of water to a specific point. It is made of stainless steel, and is available in different sizes. The concentric reducer is used in various industrial applications such as food processing and dairy plants, paper manufacturing, oil refineries and chemical plants. The concentric reducer can be used in irrigation systems, sprinkler systems, and drip irrigation systems. It provides a precise reduction in flow rates at a specific point within the pipe line. The concentric reducer can also be used for reducing pressure in water lines as well as gas lines. The concentric reducer has a unique construction that allows it to withstand higher pressures than most other types of valves. They are often used in high pressure applications where other valves would not be strong enough to withstand the stress involved. The concentric reducer is made out of stainless steel so it does not rust or corrode like other types of valves would over time due to their exposure to harsh environments and chemicals that could cause them harm if they were not made from stainless steel. This is the most common standard reducer in the field of gas and water supply. It is used for the connection between two pipes of different diameters. It can also be used as a bushing to create a permanent seal between two pipes, or as a stop to prevent the loss of fluid by creating a vacuum when it comes into contact with another section of pipe.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 10 40NB

By All India Steel and Engg

₹176  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 50NB

By All India Steel and Engg

₹294  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 65NB

By All India Steel and Engg

₹317  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 80NB

By All India Steel and Engg

₹412  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 100NB

By All India Steel and Engg

₹601  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 150NB

By All India Steel and Engg

₹1,073  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 200NB

By All India Steel and Engg

₹2,359  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Long Stub End SCH 05 250NB

By All India Steel and Engg

₹3,539  

Long Stubs are short lengths of pipe that are used to connect the ends of pipes to other fittings. The Long Stubs end is a type of flange that is used on pipes that have already been cut and threaded at one end, or on pipes that have been welded together. Stub ends can be used in a variety of applications, including air conditioning systems, industrial machinery and plumbing systems. Long Stubs Ends are used to connect pipes or tubes of different sizes. It is designed in such a way that the pipe can be easily secured with a nut & bolt. The Stub End has many benefits over other methods of joining pipes, such as: cost effectiveness, ease of installation and flexibility in joining different sizes of pipes together. We provide extensive range of Stub Ends at affordable prices with superior quality standards. Long Stubs ends come in many different sizes and materials. Choosing the right Long Stubsend for your project will ensure that it fits properly and does not leak. The length of long stud end can be selected according to actual needs, but it must be less than the thickness of the main beam (or slab). For example, if the thickness of the main beam is 50mm, then its length should not exceed 50mm; if the width of the main beam is 100mm, then its length should not exceed 100mm; if there are two layers of support bars in one layer of main beam, then its length should not exceed 100mm; if there are two layers of support bars in each layer Material Stainless Steel Usage Industrial, Domestic Brand All India Steel and Engg Color Silver

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Blind Flanges B 16.5 150 Sorf x 12THK 25NB

By All India Steel and Engg

₹671  

Flanges are manufactured in accordance with ANSI B 16.5 and they can be used as an integral part of the piping system or as a connector between two pipes. The flange is a pressure-tight connection between two components such as pipes, valves, tanks and other equipment. Flanges are designed in various shapes and sizes according to their application. They are made of materials like carbon steel, stainless steel, cast iron etc. Flanges are available in metric and imperial dimensions. The flange face is generally flat or domed shape with a hole for bolting the flange onto another pipe or fitting. flanges have male threads on one end and female threads on the other end. Slip-on flanges are commonly used for low-pressure applications such as water lines and air lines where there is no need for high-strength connections. Slip-on flanges are also commonly used with cast iron pipe systems because they do not require welding which can cause porosity problems in cast iron pipes during heating cycles in the manufacturing facilitie. Flanges are used in building and piping systems, and are also used on cylinders. A flange can also be a ring-shaped object, typically circular in cross-section but sometimes oval or rectangular. Flanges may have holes or slots through them to accommodate Nuts or bolts. Sometimes flanges are made by bending sheet metal.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Blind Flanges B 16.5 150 Sorf x 12THK 50NB

By All India Steel and Engg

₹1,533  

Flanges are manufactured in accordance with ANSI B 16.5 and they can be used as an integral part of the piping system or as a connector between two pipes. The flange is a pressure-tight connection between two components such as pipes, valves, tanks and other equipment. Flanges are designed in various shapes and sizes according to their application. They are made of materials like carbon steel, stainless steel, cast iron etc. Flanges are available in metric and imperial dimensions. The flange face is generally flat or domed shape with a hole for bolting the flange onto another pipe or fitting. flanges have male threads on one end and female threads on the other end. Slip-on flanges are commonly used for low-pressure applications such as water lines and air lines where there is no need for high-strength connections. Slip-on flanges are also commonly used with cast iron pipe systems because they do not require welding which can cause porosity problems in cast iron pipes during heating cycles in the manufacturing facilitie. Flanges are used in building and piping systems, and are also used on cylinders. A flange can also be a ring-shaped object, typically circular in cross-section but sometimes oval or rectangular. Flanges may have holes or slots through them to accommodate Nuts or bolts. Sometimes flanges are made by bending sheet metal.

Add to Cart Buy Now

Ships within 2 days

All India Steel and Engg Silver Tee SCH 05 40NB x 25NB

By All India Steel and Engg

₹447  

SS 316L Tee falls in the category of Stainless Steel Butt weld Pipe Fittings. SS 316l Tee is a non-magnetic, corrosion resistant and high temperature resistant material. SS 316l is available in the form of seamless, welded or fabricated. The material is utilized in various industries including oil & gas, chemical and petrochemical, pharmaceuticals and marine applications. The material has exceptional resistance to a wide range of chemicals such as acetic acid, amines, alcohols, ketones, esters, aromatic compounds etc. Stainless Steel Buttweld Pipe Fittings are fabricated by welded joint on the pipe. The fitting components are made of stainless steel material with high corrosion resistance, which can be used in seawater, brackish water and fresh water for Industrial Processes like Chemical and Petrochemical Plant, Oil Refinery Plant, Marine & Offshore Oil Field, and for Power Generation Plant etc. SS 316l Tee is a type of stainless steel butt weld pipe fitting used to connect two pipes together or to another fitting. It is also known as equal tee because it has equal branch pipes at both ends. SS 316l Tee is available in various sizes ranging from 15 NB to 600 NB. Tee is usually supplied in the form of round bars, cold-rolled sheets and strips, hot-rolled plates and strips, or forged products. The material is hardenable by heat treatment to obtain higher strength properties than those available from the annealed condition. Tubes are not generally produced because of difficulty in properly straightening this alloy after cold working.

Add to Cart Buy Now

Previous Next

Page 1 of 2 results