call
Have a question? Call us now at +91 9650660070
category menu Categories
search

Filter

Clear all
Brand
Crystal
Categories
Price Range
Min Price:
Max Price:
₹
-
₹
Discount
Type
Brands
More Brands

Crystal V-Blocks & Clamping Sets

Showing 21 out of 21 products

Sort by
Crystal 76.2 mm (3 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1712P
sku-leadTime Ships within 2 days
Crystal 76.2 mm (3 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1712P
By Crystal
Set of 2 piece
₹6,017  
The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.
Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block 1806HS
sku-leadTime Ships within 5 days
Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block 1806HS
By Crystal
₹28,319  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block 1805HS
sku-leadTime Ships within 3 days
Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block 1805HS
By Crystal
₹20,059  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 6 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1803HP
sku-leadTime Ships within 5 days
Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1803HP
By Crystal
Set of 2 piece
₹5,781  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal Transfer Block 50 x 75 x 75 mm Set of 2 Pcs 1553P
sku-leadTime Ships within 5 days
Crystal Transfer Block 50 x 75 x 75 mm Set of 2 Pcs 1553P
By Crystal
Set of 2 piece
₹4,483  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.
Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1802HP
sku-leadTime Ships within 5 days
Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1802HP
By Crystal
Set of 2 piece
₹11,091  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 3 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 50.8mm(2 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1711P
sku-leadTime Ships within 2 days
Crystal 50.8mm(2 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1711P
By Crystal
Set of 2 piece
₹4,011  
The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.
Crystal 25.4 mm (1 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1714P
sku-leadTime Ships within 3 days
Crystal 25.4 mm (1 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1714P
By Crystal
Set of 2 piece
₹2,595  
The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.
Crystal Transfer Block 60 x 25 x 100 mm Set of 2 Pcs 1556P
sku-leadTime Ships within 2 days
Crystal Transfer Block 60 x 25 x 100 mm Set of 2 Pcs 1556P
By Crystal
Set of 2 piece
₹4,129  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.
Crystal 4 Inch Hardened and Ground V Block With Clamp Set of 2 Pcs 1713P
sku-leadTime Ships within 6 days
Crystal 4 Inch Hardened and Ground V Block With Clamp Set of 2 Pcs 1713P
By Crystal
Set of 2 piece
₹8,259  
The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.
Crystal 4 Inch Hardened and Ground Magnetic V Block 1801HS
sku-leadTime Ships within 30 days
Crystal 4 Inch Hardened and Ground Magnetic V Block 1801HS
By Crystal
₹9,911  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 4 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 4 Inch Hardened and Ground Magnetic V Block Set of 2 Pcs 1801HP
sku-leadTime Ships within 30 days
Crystal 4 Inch Hardened and Ground Magnetic V Block Set of 2 Pcs 1801HP
By Crystal
Set of 2 piece
₹21,239  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 4 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1806HP
sku-leadTime Ships within 30 days
Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1806HP
By Crystal
Set of 2 piece
₹49,559  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block 1803HS
sku-leadTime Ships within 30 days
Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block 1803HS
1
By Crystal
₹3,185  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1805HP
sku-leadTime Ships within 30 days
Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1805HP
By Crystal
Set of 2 piece
₹30,679  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 6 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal Transfer Block 60 x 30 x 75 mm Set of 2 Pcs 1552P
sku-leadTime Ships within 30 days
Crystal Transfer Block 60 x 30 x 75 mm Set of 2 Pcs 1552P
By Crystal
Set of 2 piece
₹3,067  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.
Crystal Transfer Block 80 x 25 x 120 mm Set of 2 Pcs 1555P
sku-leadTime Ships within 30 days
Crystal Transfer Block 80 x 25 x 120 mm Set of 2 Pcs 1555P
By Crystal
Set of 2 piece
₹6,017  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.
Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block 1802HS
sku-leadTime Ships within 30 days
Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block 1802HS
By Crystal
₹6,135  
Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 3 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.
Crystal Transfer Block 50 x 20 x 100 mm Set of 2 Pcs 1557P
sku-leadTime Ships within 30 days
Crystal Transfer Block 50 x 20 x 100 mm Set of 2 Pcs 1557P
By Crystal
Set of 2 piece
₹3,421  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.
Crystal Transfer Block 50 x 35 x 100 mm Set of 2 Pcs 1551P
sku-leadTime Ships within 30 days
Crystal Transfer Block 50 x 35 x 100 mm Set of 2 Pcs 1551P
By Crystal
Set of 2 piece
₹4,011  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.
Crystal Transfer Block 50 x 50 x 100 mm Set of 2 Pcs 1554P
sku-leadTime Ships within 30 days
Crystal Transfer Block 50 x 50 x 100 mm Set of 2 Pcs 1554P
By Crystal
Set of 2 piece
₹4,365  
Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Ratings and Reviews

4
1 Ratings, 1 Reviews
  • 5
  • 4
  • 3
  • 2
  • 1
  • 0
  • 1
  • 0
  • 0
  • 0

4

• very good

Reviewed: 9 Aug, 2018

very good

Recommended Items
sku-leadTime Ships within 10 days
WD-40 Multipurpose Cleaning Spray 420 ml
14
₹312
oos-available Ships within 24 hrs
Nataraj Classic Use & Throw Ball Pens Blue (Pack of 40)
17
Pack of 40 piece
₹150
oos-available Ships within 24 hrs
Silverton 65 GSM A4 Copier Paper (Pack of 10 Ream)
13
Pack of 10 ream
₹1,886
oos-available Ships within 24 hrs
Generic 5 L Rose Fragrance Liquid Soap Hand Wash
1
Can of 1 piece
₹296
oos-available Ships within 24 hrs
Generic BOPP Packaging Brown Tape 50.8mm(2 Inch) x 50 m (Pack of 6)
13
Pack of 6 piece
₹173
oos-available Ships within 24 hrs
Generic Floor Cleaner Lemon Fragrance Yellow, (5 L)
Can of 1 piece
₹271
oos-available Ships within 24 hrs
POWERWASH 40X40 cm 600 GSM Microfiber Cloth (Pack of 4)
11
Pack of 4 piece
₹184
oos-available Ships within 24 hrs
Luxor 1223 Whiteboard Marker Pens Black (Pack of 10)
Pack of 10 piece
₹152
oos-available Ships within 24 hrs
Duracell Chhota Power AAA Alkaline Batteries (Pack of 12)
15
Pack of 12 piece
₹214
oos-available Ships within 24 hrs
Allen Cooper Steel Toe Safety Shoes Low Ankle PU Sole Size 8 UK/India Black & Grey, ACL-1156
4
₹1,519
oos-available Ships within 24 hrs
Silverton 70 GSM A4 Copier Paper (Pack of 10 Ream)
17
Pack of 10 ream
₹1,999
oos-available Ships within 24 hrs
IB BASICS 555 GSM Box Index File With Lamination Legal A4 Size Assorted Color (Pack of 4)
Pack of 4 piece
₹269
oos-available Ships within 24 hrs
GENERIC 10x12 inch Plastic Tamper Resistant Courier Bag with POD, 51 Micron (Pack of 100)
2
Pack of 100 piece
₹185
oos-available Ships within 24 hrs
IB BASICS 310 GSM Cobra File (Spring Clip) Assorted Color A4 Size (Pack of 10)
Pack of 10 piece
₹150
oos-available Ships within 24 hrs
Safari Pro Steel Toe Derby Safety Shoes Low Ankle Size UK 8 Black Model Power
6
₹194
oos-available Ships within 24 hrs
ABRO PU Foam Insulation Sealant Off White, 750 ml
₹393
oos-available Ships within 24 hrs
GENERIC Steel Toe Safety Shoes High Ankle PVC Sole Size UK 9 Black, Power-9
12
₹299
oos-available Ships within 24 hrs
GENERIC 12A Compatible Toner Cartridge Black for HP LaserJet 1010 and 1020 Printer series, HP LaserJet 3015, 3020, 3030, 3050, 3050z, 3052, and 3055 All-in-One Printer series, and HP LaserJet M1005 mfp
14
₹412
Browsing History
sku-leadTime Ships within 5 days
NVK CULTIVATOR 9 - TYNES
₹37,799
sku-leadTime Ships within 7 days
Kisankraft Agricultural Inter Cultivator KK-IC-250D
₹99,749
sku-leadTime Ships within 3 days
RBD Mini Harvester Petrol Type with ISI Honda Engine RBD-RPR
₹1,67,999
sku-leadTime Ships within 7 days
Kisankraft Diesel Intercultivator KK-IC-256D
₹93,449
sku-leadTime Ships within 10 days
Stihl 7 HP Petrol Operated Power Tiller, MH-710
₹82,949
sku-leadTime Ships within 3 days
RBD Mini Harvester Diesel Type with ISI Greaves Cotton Engine RBD-RDR
₹1,78,499
sku-leadTime Ships within 3 days
Texas 306 cc 4 stroke Power Weeder Pro Trac 950D with Self Start
₹1,78,499
sku-leadTime Ships within 6 days
Neptune NC-100 380 RPM Red Weeder
₹44,099 ₹54,600
19.23% OFF
sku-leadTime Ships within 7 days
KISANKRAFT Agricultural Inter Cultivator/Power Weeder 208 cc 4 Stroke Petrol Engine, KK-IC-208P
₹86,139

Top Selling Crystal V-Blocks & Clamping Sets Products Price List for March 2026

Product Name Expected Price Dispatch Time Discount
Crystal Transfer Block 80 x 25 x 120 mm Set of 2 Pcs 1555P ₹6,017 30 days --
Unique U 120-1 Cast Iron V Block (150x100x100 mm) ₹9,085 11 days 31.11% OFF
Gurunanak International MVB14 Magnetic V Block 150X95X75mm ₹7,905 4 days --
TORRENS Soft Magnetic V Block 934 ₹6,371 30 days --
OZAR Multi Use V-Block and Clamp Set, Size 60x70x50 mm Clamping Capacity 50 mm, AVB-0545 ₹7,079 4 days --
Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block 1806HS ₹28,319 5 days --
Gurunanak International MVB4 Magnetic V Block 150X95X75mm ₹9,793 3 days --
Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block 1803HS ₹3,185 30 days --
Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block 1805HS ₹20,059 3 days --
Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block 1802HS ₹6,135 30 days --
This data was last updated on 17/03/2026

Shop All Categories

Shop All Brands

Popular Searches

Helpline Number
Helpline Number Call: +91 9650660070 (Mon-Sun: 9am-8pm)
Return within 7 days
Return within 7 days of receiving your order
100% Safe & Secure Payments
100% Safe & Secure Payments Pay using secure payment methods
100% ORIGINAL
100% ORIGINAL guarantee for all products
Complete products
Complete products 20,00,000+ products from 12,000+ Brands
Buyer Protection
Buyer Protection Committed to buyer interests to provide a smooth shopping experience.
Experience Industrybuying App
play store app store
Follow us on
facebook twitter instagram pinterest linkedin

Company

Sister Site

Help

Copyright ©industrybuying.com 2013-2026 All Right Reserved
payment options