Have a question? Call us now at +91 9650660070

Leader Products Online

Showing 40 out of 2126 products

Sort by

Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16

Ships within 4 days

Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16

By Leader

₹5,309

The GM 275 Forged Brass Double Regulating Balancing Valve is a double regulating type with nozzles and is used in the petroleum industry for precise balancing and also as a safety valve or back pressure regulator in gas distribution systems and industrial applications where a double regulating balancing valve is required. The brass body of this product helps to prevent damage or corrosion from occurring during use while its Teflon seals help to prevent leakage or wear over time due to repeated opening/closing operations. The GM 275 is a double regulating balancing valve that confirms to BS 7350 PN-16 and has been designed specifically for use in high pressure water systems. This valve is suitable for use in both domestic and commercial applications and is ideal for pumping stations, power stations, irrigation systems and water treatment plants where high pressure and accurate flow control are essential requirements. It has a working pressure of up to 24 bar (hydraulic) and 17.6 bar (hydrostatic). It also features a nozzle with an internal diameter of 0.4 cm and an external diameter of 0.5 cm for easy installation into existing systems with minimal modification required due to its compact design so it can be easily replaced during routine maintenance periods or when more efficient equipment is required after years of use without having to replace all the piping as well as all other components involved with installing new equipment which could cost thousands of dollars instead of just replacing one piece at a time which would cost much less over time plus save you money while improving efficiency at the same time!

Leader 3 Inch,80 mm Cast Iron Wafer Type Check Valve CI 038

Ships within 3 days

Leader 3 Inch,80 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹2,138

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

Ships within 4 days

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹6,729

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Leader GM 210 Forged Brass G Air Release Valve 25 mm PN - 16

Ships within 4 days

Leader GM 210 Forged Brass G Air Release Valve 25 mm PN - 16

By Leader

₹1,096 ~~₹1,379~~

You save ₹283!

20.52% OFF

The GM 210 Forged Brass Air Release Valve is a durable and reliable product designed to help you get the most out of your air compressor. This valve has been designed to work with a wide range of applications and it can be used in a variety of situations such as industrial applications or construction sites. It is also suitable for use in domestic settings as well as commercial environments where there are high levels of activity on a daily basis. The valve itself has been made from high quality materials including forged brass which means it will last longer than other types of valves available on the market today plus it comes with an array of features that make it stand out from its competitors too! GM 210 Forged Brass Air Release Valve is a high quality air release valve that is used in a wide variety of applications. The forged brass body ensures durability and long life, while the stainless steel spring provides reliable operation with minimal wear. The PP float disc and rubber O-ring provide reliable sealing and sealing capabilities. The valve features a forged brass construction, which makes it durable and resistant to corrosion. The valve has a 24 bar Hyd. Float with PP, Spring - SS304 rubber o-ring and rubber disc, float - PP. This air release valve is designed to be used with 24 bar hydropneumatic systems and has a B.T.P. (bargaining temperature pressure) of 24 bar. The unit comes with a PP spring and an SS304 rubber O-ring, which will help ensure that it performs optimally in your system.

Related Searches

leader gun metal gate and sluice valves

leader check valves

leader globe valves

leader gate and sluice valves

leader metal pipe fittings

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

Ships within 5 days

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

By Leader

₹1,829

The IS 021 is a gun metal horizontal lift check valve designed for use in piping systems where the flow must be stopped when the system pressure reaches a predetermined value (the actuation pressure). The valve is manufactured from gun metal and has a screwed-in cover, which provides protection against damage to the sealing face by foreign objects entering the system or accidental contact with hot surfaces during maintenance work on other parts of the system The IS 021 is suitable for use in systems in which there are high pressures or temperatures, such as those found in chemical or petrochemical plants, boiler houses, power stations, etc., but is also suitable for use in general industrial applications requiring automatic shutoff of liquids and gases at predetermined pressures (actuation pressures). This Horizontal Lift Check Valve is manufactured from gun metal and a single piece of solid steel mandrel with integral seats and pressure valves for the cleanest, most reliable seal possible. The body is manufactured from gun metal, with integral seat, spring loaded poppet valves and pre-set at the factory to ensure a leak free seal when installed correctly with no further adjustment required (unless damaged). The IS 021 is a gun metal Horizontal Lift Check Valve that is used to prevent backflow of water or steam into a system when it is not in operation, or under pressure. It has a screwed in cover with a BSP male thread on one end and an integral seat cu-alloy on the other end to provide a seal against pressure. The valve has been designed for use at temperatures ranging from -20°C to +100°C with pressure ratings between 1 and 2 MPa

Leader 2 Inch, 50 mm Cast Iron Butterfly Valve CI 091

Ships within 4 days

Leader 2 Inch, 50 mm Cast Iron Butterfly Valve CI 091

By Leader

₹2,858

The CI 091 cast iron butterfly valve has been designed for use in supply water systems and industrial applications such as oil refineries, petrochemical plants and food processing units to ensure reliable operation under tough conditions and high pressure conditions up to 2 bar / 30 mWC. It is suitable for use with all standard industrial fluids including chemicals, water and steam etc., provided they are compatible with the materials used in its construction. The product is manufactured from cast iron (IS 1865 SG 400/15), which is suitable for use in both steam and hot water applications as well as other corrosive environments such as acids, alkalis, salt solutions etc., making it a highly versatile product that can be used across multiple industries including oil & gas refineries, chemical plants and fertilizers manufacturing facilities along with pulp & paper mills among others. This controls the opening and closing of the valve; when it's pulled down, it opens up one side of the disk so that fluid can flow through it; when it's pushed back up again, it closes off that same side so that no more fluid will pass through that opening anymore. This butterfly valve is suitable for applications where there are high temperatures or pressure fluctuations and where corrosive fluids are present in water or gas pipelines such as municipal water supply systems and oil refineries etc.

Leader Gun Metal Globe Valve 20 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 4 days

Leader Gun Metal Globe Valve 20 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹1,651

Key Features:
Isi Screwed In Bonnet.
Rising Stem.
Screwed Female Ends To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 3 days

Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹1,096

Key Features:
Isi Screwed In Bonnet.
Rising Stem.
Screwed Female Ends To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

Ships within 4 days

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

By Leader

₹2,359

Key Features:
Isi Screwed In Cover.
Integral Seat.
Screwed Female Threads To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader GM 230 Gun Metal F Y-Type Strainer 20 mm

Ships within 4 days

Leader GM 230 Gun Metal F Y-Type Strainer 20 mm

By Leader

₹1,029

GM 230 Gun Metal Y-Type Strainer Y' Type Screwed in Cover Tested to 24 Bar (Hyd.) SS (Type 304) Screen Having 1mm Dia Perforation The GM 230 Gun Metal Y-Type Strainer is a high quality, heavy duty, Y-type strainer with a screwed in cover. It has been tested to 24 Bar (hydraulics) and is made from high quality SS (type 304) which makes it extremely durable and long lasting. The strainer features an opening with 1mm diameter perforations for easy flow of liquid and small particles. The GM 230 Gun Metal Y-Type Strainer is a tested, 24 bar (hydraulic) strainers that are designed to be fitted with a screwed-on cover. This strainer features a 1mm perforation for finer filtration. The product is made from 304 stainless steel and is of the highest quality. The GM 230 gun metal Y-type strainer has a screwed in cover and is tested to 24 bar (hydrostatic). The product is made of SS (type 304) which is also known as gun metal. It has a screen having 1mm dia perforation. The GM 230 Gun Metal Y-Type Strainer is a Y-type screw-in cover tested to 24 bar (hyd.) and made of stainless steel (type 304). It has a 1mm perforated screen. The GM 230 Gun Metal Y-Type Strainer is a y-type screw-in cover strainer with a Y' type perforated screen. It is manufactured from gun metal and tested to 24 bar (hydraulic). The screen has 1mm diameter perforations.

Leader 3/4 Inch,20 mm Gun Metal Horizontal Lift Check Valve GM 030

Ships within 4 days

Leader 3/4 Inch,20 mm Gun Metal Horizontal Lift Check Valve GM 030

By Leader

₹931

The GM 030 Gun Metal Horizontal Lift Check Valve BS : 5154 PN - 16 Screwed in Cover B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Integral Seat Cu-alloy is a high-quality check valve manufactured by [company name]. It's designed to work in horizontal lift applications and has a working pressure of between 24 and 17.6 bar, depending on which version of the product you purchase. The GM 030 Gun Metal Horizontal Lift Check Valve BS : 5154 PN - 16 Screwed in Cover B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd is made from high-quality materials that are designed to last for a long time without breaking down or malfunctioning unexpectedly (which can happen with some other models). This means that you won't have to worry about your equipment getting damaged by faulty products—you can just focus on running your business! This product has been tested thoroughly by professionals at our company to ensure that it meets all specifications for quality control standards set forth by our industry body. The valve also has a gun metal finish, which helps it resist corrosion and improve its resistance to chemicals such as chlorine and acids that may be present in the environment where it is being used. It is made from gun metal and has an integral seat made from copper alloy, which helps to ensure that the valve closes properly and does not leak when it is closed. The valve is available in a variety of materials, sizes and configurations to suit your application needs.

Leader FCS 007 Forged Cast Steel G Globe Valve 25 mm Class - 800

Ships within 3 days

Leader FCS 007 Forged Cast Steel G Globe Valve 25 mm Class - 800

By Leader

₹4,306

This product has been designed to meet the highest standards when it comes to quality and durability. It has been designed from the ground up to be strong and durable so that it can withstand all of the pressures that you put on it day after day without giving up or breaking down on you at any point in time during those long years of use which are sure to follow once you purchase this item today! This product comes with everything that you need right out of the box so there is no need for any additional parts or accessories in order for you to use it effectively within your home or workplace environment where ever those may lie today! This product is made from a resilient alloy steel spiral wound with SS 304 with Graphoil Filler Renewable Plug Type Discs. Its forged cast steel bonnet keeps corrosion at bay while its bolted bonnet makes it easy to service when necessary. This valve is made of forged cast steel, which makes it incredibly tough and long-lasting. It can withstand the harshest conditions and still function perfectly. The body of the valve is also resistant to corrosion. The valve has an O/S bonnet and yoke type body, which means that it has a rising stem design with an offset bonnet design that allows you to use the same size bolts on both ends of the valve body so they don't stand out too far from the wall when installed into place.

Leader FCS 007 Forged Cast Steel D Globe Valve 15 mm Class - 800

Ships within 3 days

Leader FCS 007 Forged Cast Steel D Globe Valve 15 mm Class - 800

By Leader

₹2,798

Leader 3 inch, 80 mm Ductile Iron Swing Check Valve, CI 017

Ships within 5 days

Leader 3 inch, 80 mm Ductile Iron Swing Check Valve, CI 017

By Leader

₹15,339 ~~₹18,890~~

You save ₹3,551!

18.8% OFF

The Leader 3 inch, 80 mm (CI 017) Ductile Iron Check Valve exemplifies a robust and reliable solution for preventing backflow and ensuring fluid flow direction in industrial processes. Meticulously crafted with precision engineering, this check valve is constructed from high-quality ductile iron, combining durability with corrosion resistance. The ductile iron construction ensures the valve's strength and resilience, making it an ideal choice for applications in water distribution systems, wastewater treatment plants, and various industrial processes. The innovative design of the Leader Ductile Iron Check Valve features a hinged disc that allows fluid to flow in one direction while preventing reverse flow. This design ensures effective and efficient operation, providing essential protection for pumps, pipelines, and other downstream equipment. The ductile iron material enhances the valve's durability, making it well-suited for challenging environments where exposure to corrosive substances is common. Engineered to meet industry standards, the Leader Check Valve offers a reliable and cost-effective solution for preventing backflow. Its adaptability allows for integration into diverse fluid systems, contributing to the overall efficiency and reliability of industrial processes. The valve's versatility and low maintenance requirements make it a practical choice for applications where dependable backflow prevention is essential. In summary, the Leader Ductile Iron Check Valve combines durability, precision engineering, and adaptability, making it a crucial component for ensuring fluid flow direction and preventing backflow in a wide range of industrial applications. This valve underscores the Leader brand's commitment to providing high-quality solutions that contribute to the safety, efficiency, and reliability of fluid systems.

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

Ships within 30 days

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹1,073 ~~₹1,234~~

You save ₹161!

13.05% OFF

Leader 6 inch, 150 mm P Ductile Iron Pressure Reducing Valve, DI 050

Ships within 30 days

Leader 6 inch, 150 mm P Ductile Iron Pressure Reducing Valve, DI 050

By Leader

₹1,53,399 ~~₹1,65,852~~

You save ₹12,453!

7.51% OFF

The Leader 6 inch, 150 mm (DI 050) Ductile Iron Pressure Reducing Valve is an indispensable component in fluid control systems, designed to regulate and maintain a consistent downstream pressure, ensuring optimal performance and safety in various industrial applications. Crafted with precision engineering from high-quality ductile iron, this pressure reducing valve exemplifies durability, strength, and corrosion resistance. Its robust construction makes it particularly suitable for applications in water supply systems, irrigation, and industrial processes where precise pressure control is paramount. The ductile iron construction of the Leader Pressure Reducing Valve provides exceptional resilience to challenging environmental conditions, making it a reliable choice for long-term use. The valve's ability to withstand varying pressures and temperatures ensures its adaptability to diverse settings. Equipped with advanced features, such as an adjustable spring-loaded mechanism, the valve allows operators to set and maintain the desired downstream pressure with accuracy. Engineered to meet industry standards, the Leader Ductile Iron Pressure Reducing Valve offers a dependable solution for controlling water flow and pressure in pipelines. Its versatility and ease of integration make it suitable for a wide range of applications, contributing to the overall efficiency and reliability of fluid systems. In summary, the Leader Ductile Iron Pressure Reducing Valve combines durability, precision engineering, and adherence to industry standards to provide a high-performance solution for maintaining optimal pressure levels in fluid systems, ultimately enhancing the safety and efficiency of industrial processes.

Leader CI 094 Cast Iron N Kinetic Air Release Valve 100 mm PN - 1.6

Ships within 30 days

Leader CI 094 Cast Iron N Kinetic Air Release Valve 100 mm PN - 1.6

By Leader

₹46,019 ~~₹51,938~~

You save ₹5,919!

11.4% OFF

This product by Leader CI 094 valve that can be used to release excess air from your system, and it can also be used as an on-off switch for your products. The valve is made from cast iron, which makes it very durable and able to withstand high amounts of pressure. It also has an ebonite coating on its wooden ball, which makes it resistant to corrosion and other damaging effects caused by water or chemicals. This product comes with a standard operating pressure of 17.6 bar hyd., which means that it will work well in most industrial applications. This valve is made of high quality materials, and it will last you a long time if you take care of it correctly. The wooden ball design helps to prevent clogging, which can be a problem with other valves. It has an easy-to-use handle that makes it easy to open and close, even when you're wearing gloves or mittens! The valve has been tested and verified by our team of experts to ensure that it meets all relevant industry standards for safety and performance. If you want to make sure that your plumbing system is up-to-date with modern technology, then this is the product for you!

Leader Gun Metal Gate Valve 40 mm 24 BAR Pn 16

Ships within 30 days

Leader Gun Metal Gate Valve 40 mm 24 BAR Pn 16

By Leader

₹3,539

Key Features:
Screwed In Bonnet Inside Screw.
Non-Rising Stem.
Integral Seat.
Solid Wedge.
Screwed Female Bsp Parallel Threads To Bs: 21.

Leader 1-1/2 Inch, 40 mm Gun Metal Wheel Operated Gate Valve IS 001

Ships within 30 days

Leader 1-1/2 Inch, 40 mm Gun Metal Wheel Operated Gate Valve IS 001

By Leader

₹3,893 ~~₹4,312~~

You save ₹419!

9.72% OFF

Leader IS 001 Gun Metal I Gate Valve 40 mm Class - 1 is made from gun metal and has an integral seat in the solid wedge design which means it can be used in both high pressure and low pressure systems. The valve has an inside screw which means that it can be used on a wide range of different pipe sizes and is suitable for use with both hot and cold water systems as well as refrigeration systems and other gases such as air or steam which require temperature control via pressure control valves in order to prevent damage to pipes or other equipment when temperatures become too high or too low inside them due to changes in external conditions like weather conditions outside where they're located (such as wind chill factor while camping outdoors during winter months). The IS 001 Gun Metal Gate Valve is a Class - 1 screw in bonnet, inside screw, non-rising stem B.T.P. - 1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Integral Seat Solid Wedge Cu - alloy valve made by IS:778 International Standards Organization standards for products that are designed to be used in industrial applications with low pressure (under 7 bar) and medium pressure (up to 10 bar). It has a working pressure range of 0 psi (0 bar) to 1450 psi (100 bar), with a flow rate of 11 liters per minute at 10 psi, which makes it suitable for use in many different industries including pharmaceuticals, food processing, and oil & gas production.

Leader 2 inch, 50 mm Cast Iron Butterfly Valve, CI 096

Ships within 30 days

Leader 2 inch, 50 mm Cast Iron Butterfly Valve, CI 096

By Leader

₹3,303 ~~₹3,784~~

You save ₹481!

12.71% OFF

The Leader 2 inch, 50 mm (CI 096) Butterfly Valve represents a pinnacle in fluid control technology, offering a versatile and reliable solution for regulating and isolating the flow of fluids in various industrial applications. Crafted with precision engineering and durability in mind, this butterfly valve is designed to provide efficient control and isolation in pipelines, ensuring optimal performance and system integrity. With a streamlined and compact design, the Leader Butterfly Valve is ideal for applications where space is a consideration, such as water treatment plants, HVAC systems, and industrial processes. Constructed from high-quality materials, including durable alloys or ductile iron, this valve exemplifies strength and resilience. The materials used enhance corrosion resistance, making the Leader Butterfly Valve suitable for applications where exposure to aggressive substances is common. The valve's design includes a disc that rotates on a shaft, allowing for quick and precise control of fluid flow. The versatility of the Leader Butterfly Valve is evident in its ability to handle a wide range of pressures and temperatures, making it a reliable choice for diverse industries. Whether used for throttling or isolating flow, this valve provides a cost-effective and efficient solution. Its ease of operation, low maintenance requirements, and compatibility with various actuation methods further contribute to its popularity in fluid control systems. In summary, the Leader Butterfly Valve combines durability, precision engineering, and adaptability to deliver a high-performance fluid control solution. Its robust construction and efficient design make it a trusted choice for engineers and professionals seeking reliable and versatile valves for a wide range of industrial applications.

Leader Gun Metal Gate Valve 25 mm 24 BAR Pn 16

Ships within 30 days

Leader Gun Metal Gate Valve 25 mm 24 BAR Pn 16

By Leader

₹1,651

Key Features:
Screwed In Bonnet Inside Screw.
Non-Rising Stem.
Integral Seat.
Solid Wedge.
Screwed Female Bsp Parallel Threads To Bs: 21.

Leader GM 059 Brass G Bib Cock 25 mm PN - 10

Ships within 30 days

Leader GM 059 Brass G Bib Cock 25 mm PN - 10

By Leader

₹1,415 ~~₹1,484~~

You save ₹69!

4.65% OFF

Bib cocks are used to control flow of water, gas, or steam from one pipe to another. They are also used for non-pressure services such as domestic hot and cold water supply systems and for drainage purposes such as sinks and toilets. This brass bibcock is made of brass and has a polished body with a gasket face seal, an adjustable washerless bonnet nut, a steel spindle and is compatible with 16 bar hydraulic system pressure only. The GM 059 Brass Bib Cock PN - 10 Crutch Head Polished Body B.T.P. - 16 Bar Hyd.S.T.P. - 11 Bar Hyd. is a high-quality, reliable brass bib cock that can be used in both commercial and residential settings. It features a polished body with a 16-bar hydrant shutoff valve and 11-bar hydrant shutoff valve for superior water flow control. This product is manufactured by Leader Brass and comes with a lifetime warranty against manufacturer defects. The Leader Brass D Bib Cock is designed to replace the existing brass valve in your washbasin. This is a product of high quality, and it comes with a polished body, brass body tube and crutch head. It also has a B.T.P. of 16 bar and an S.T.P. of 11 bar, allowing you to use it in different situations without having to worry about whether or not it will be strong enough for your needs. This product is made by GM 059, an industry leader in the production of household goods and accessories, with over 100 years of experience and expertise behind them.

Leader 3 Inch, 80 mm Gun Metal Wheel Operated Gate Valve GM 002

Ships within 30 days

Leader 3 Inch, 80 mm Gun Metal Wheel Operated Gate Valve GM 002

By Leader

₹15,880

It is manufactured from materials that meet the highest quality standards and this ensures its durability and long life span which will allow you to use it for years to come without having to worry about maintenance or replacement costs. The product comes with a 3 year warranty from the manufacturer which gives you peace of mind knowing that your product has been tested thoroughly before being released for sale on the market so that you can enjoy using it for many years without having any problems occurring during use over time. The GM 002 Gun Metal Gate Valve BS 5154 PN - 16 Screwed in Bonnet Inside Screw, Non-Rising Stem B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a high-quality gate valve made to last for years to come with its gun metal finish and robust construction. This gate valve has an internal bonnet that can be screwed in or out on the inside of the valve, making it easy to service when necessary. The valve has a non-rising stem and is suitable for use with 24 bar (3,045 psi) hydraulic systems and 17.6 bar (250 psi) hydropneumatic systems, as well as being able to handle up to a PN 16 screw thread connection on the outside of the valve body. This versatile valve also features an integral seat made from solid wedge copper alloy material for superior durability and reliability over time—no matter what kind of pressure you're putting it through!

Leader 3/4 Inch,20 mm Gun Metal Vertical Check Valve GM 048

Ships within 30 days

Leader 3/4 Inch,20 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹754 ~~₹866~~

You save ₹112!

12.93% OFF

Leader GM 066 Gun Metal K Ball Float Valve 65 mm PN - 10

Ships within 30 days

Leader GM 066 Gun Metal K Ball Float Valve 65 mm PN - 10

By Leader

₹22,419 ~~₹24,390~~

You save ₹1,971!

8.08% OFF

Leader GM 066 Gun Metal K Ball Float Valve 65 mm PN - 10 Rough Body with Plastic Ball B.T.P. - 15 Bar Hyd. S.T.P. - 11 Bar Hyd., manufactured by Leader, is a ball float valve that has been designed to work with a variety of liquids and gases. The body of this device is constructed from gun metal and has a rough finish, while the ball is made of plastic. This product can be used in applications involving compressed air, water, oils, and even acids under pressure up to 15 bar. It is made from gun metal and has a plastic ball inside the body of the valve that moves up and down to control flow, like a faucet. The ball is what controls how much water comes out, so when you turn on the water, it can fill up your bathtub or wash machine until it reaches a certain level and then shuts off automatically. It has a high-quality, durable ball valve with a metal body that can be used in a variety of applications, including industrial piping systems and other water-based systems. This valve is made from gunmetal, which is an alloy of copper and tin, and has a rough finish for improved wear resistance and corrosion resistance. This valve features a plastic ball that helps to prevent corrosion from occurring on the threads at the top of the valve's housing; this helps ensure that your equipment lasts longer than it would if you were using another material instead (such as brass or stainless steel).

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

Ships within 30 days

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

By Leader

₹41,299 ~~₹48,090~~

You save ₹6,791!

14.12% OFF

It is an excellent choice for use in a variety of industrial applications, including the oil, gas and petrochemical industries. This valve features a raised stem that allows for easier disassembly and inspection of all parts of the valve, including the bonnet and wedge seat components which are made from carbon steel and are backed up by a renewable seal made from copper alloy material which prevents corrosion due to high temperature applications while also providing durability against wear and tear associated with excessive usage over time! Its rising stem face-to-face distance is 2.4 meters while its rising stem face-to-face distance is 0 meters respectively according to IS: 14846 code specifications (which means it can handle high pressure levels without leaking). The CI 058 Cast Iron Gate Valve Straight Pattern IS:14846 PN 1.6 Bolted Bonnet, O/S & Yoke Type, Rising Stem Face to Face Dist B.T.P. - 2.4 MPa Hyd S.T.P. - 1.6 MPa Hyd is used for medium temperature applications in the oil and gas industry as well as other industries where there are high temperatures involved such as boilers, furnaces and boilers This gate valve has a rising stem design with a face-to-face distance of 2mm which makes it ideal for use with high pressure applications such as oil wells and refineries It also has an adjustable seat and bonnet design which allows you to adjust or repair your gate valve without having to replace it entirely if something goes wrong.

Leader 4 Inch, 100 mm Cast Iron Reflux Valve CI 021

Ships within 30 days

Leader 4 Inch, 100 mm Cast Iron Reflux Valve CI 021

By Leader

₹16,519 ~~₹18,784~~

You save ₹2,265!

12.06% OFF

This is a CI 021 Cast Iron Reflux Valve IS: 5312 PN - 1.6 Bolted Cover B.T.P. - 2.4 MPa Hyd.S.T.P. - 1.6 MPa Hyd that is made from the best quality raw materials and is manufactured by our experts based on the international standards and industry norms using latest technology and sophisticated machinery with complete adherence to all safety measures and guidelines laid down by the government or industry bodies so that it can be used in various industries like oil refineries, petrochemicals, chemical plants etc without any problem because of its excellent quality in terms of strength, durability etc and also ensures long lasting performance without any maintenance cost so as to provide excellent value for money to our esteemed customers in various industries across the globe. This product has been tested and meets the standards outlined in IS:5312, which are accepted throughout the International community as an industry benchmark for quality assurance and consistency of product performance. This product is made with durable cast iron, which makes it durable enough to withstand high temperatures and pressures, while also being lightweight enough for easier installation and maintenance by operators or technicians who work on the system regularly or only occasionally need access to the valve itself (depending on how often you intend on using your unit).

Leader CI 052 Cast Iron Equilibrium Float Valve 100 mm Class - 125

Ships within 30 days

Leader CI 052 Cast Iron Equilibrium Float Valve 100 mm Class - 125

By Leader

₹75,519 ~~₹89,552~~

You save ₹14,033!

15.67% OFF

The CI 052 is suitable for use in steam, hot water or other gases in the chemical industry, power stations and petrochemical plants where there are large variations in temperature and pressure conditions within the process system itself or where there are external changes in these parameters due to seasonal variations in outdoor temperatures or other reasons such as industrial accidents causing fire damage etc., which may otherwise cause physical damage to equipment such as piping systems leading to leakage of hot water through cracks formed during thermal expansion due to sudden cooling down after having been exposed to high temperature levels during operation; also useful where there are high pressures involved. This product is made from copper alloy carbon steel with compressed non asbestos fiber insulation and a body material of cast iron. The CI-052 will help you to control flow in your system by using the lever arm to open or close the valve as needed, which can be done manually or automatically depending on what kind of system you have installed it in and whether or not there are any other sensors present that could signal when things need adjusting through an automated system like this one (such as one built into an existing building's plumbing system).

Leader CI 093 Cast Iron Y-Type Strainer 50 mm PN - 16

Ships within 30 days

Leader CI 093 Cast Iron Y-Type Strainer 50 mm PN - 16

By Leader

₹3,539 ~~₹4,048~~

You save ₹509!

12.57% OFF

The product is made up of cast iron and features a compact design that can be easily installed at any point in the piping system to separate solids from liquids. This is a high quality product that has been tested to the highest standards, meeting the requirements of BS, DIN, ISO and ANSI standards. The CI 093 Cast Iron Y-Type Strainer PN - 16 is a strainer that has been tested to 24 Kg/Cm2 SS (Type 304) screen having 1MM Dia Perforation. It is made of cast iron and comes with a 'Y' Type. This product is available at a great price and would make a perfect addition to your toolkit. This strainer is made from cast iron and has a PN - 16 connection. It features a y-shaped outlet that allows for multiple pipes to be connected at once. To install the strainer, simply attach it to each pipe with a bolt or screw. The CI 093 can be used in many industrial applications, including: oil fields, petrochemical plants, refineries, chemical plants and more! It is designed to be used in various industries such as food processing, oil and gas, power generation and water treatment. The cast iron strainer is ideal for use in applications where medium and fine particle size is required.

Leader 1 Inch, 25 mm Forged Cast Steel Ball Valve FCS 017

Ships within 30 days

Leader 1 Inch, 25 mm Forged Cast Steel Ball Valve FCS 017

By Leader

₹3,303 ~~₹3,786~~

You save ₹483!

12.76% OFF

The FCS 017 forged cast steel ball valve is a high-quality product that is suitable for a variety of applications. The B.T.P. -207 bar hyd. and S.T.P. -76 bar hyd. are two of the most common pressures that this valve can be used with, making it an ideal choice for both residential and commercial applications. These valves are made from forged cast steel and feature a 3-piece design with a regular bore ball and stem made from stainless steel (ASTM A276 : Type 304). This means that they are extremely durable, reliable and long-lasting, so you can count on them to work perfectly for years without any problems or issues. The seat is made from PTFE (RPTFE), which is resistant to chemicals, abrasion and corrosion, so you can use these valves in almost any type of environment without worrying about whether or not they will hold up over time. A beautiful, durable ball valve with a stainless steel stem. The Leader FCS 017 is ideal for industrial applications where durability, reliability and ease of use are important factors. It has a regular bore and comes in three pieces. The Leader FCS 017 is made from forged cast steel - no seams or welding means it's resistant to corrosion. It's also easy to install and maintain.

Leader 1-1/2 inch, 40 mm I Feed Check Valve, BM 050

Ships within 30 days

Leader 1-1/2 inch, 40 mm I Feed Check Valve, BM 050

By Leader

₹35,399 ~~₹41,318~~

You save ₹5,919!

14.33% OFF

The Leader 1-1/2 inch, 40 mm (BM 050) Cast Steel Feed Check Valve represents a pinnacle in industrial valve technology, offering robust construction and reliable performance for critical applications. Crafted with precision from high-quality cast steel, this feed check valve is engineered to provide efficient and secure control over fluid flow in demanding industrial environments. The cast steel construction not only imparts exceptional strength but also ensures durability and resilience, making it well-suited for applications in oil and gas, chemical processing, and power generation. The feed check valve's design incorporates advanced features for optimal functionality. It serves a crucial role in controlling the flow of fluids, preventing reverse flow, and maintaining system efficiency. The cast steel body enhances the valve's resistance to corrosion, wear, and high-pressure conditions, ensuring a long service life with minimal maintenance requirements. Engineered to meet industry standards, the Leader Cast Steel Feed Check Valve is a dependable component in various fluid-handling systems. Its versatility makes it suitable for use in pipelines, boilers, and other critical applications where precise flow control is paramount. The valve's robust construction and efficient operation contribute to the overall safety and reliability of industrial processes. In summary, the Leader Cast Steel Feed Check Valve combines durability, precision engineering, and adherence to industry standards to deliver a high-performance solution for fluid control. Whether integrated into complex industrial systems or essential infrastructure, this feed check valve exemplifies the Leader brand's commitment to providing reliable and efficient solutions for fluid handling in diverse industrial settings.

Leader Gun Metal Gate Valve 50 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 30 days

Leader Gun Metal Gate Valve 50 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹16,519

Key Features:
ISI Screwed In Bonnet.
Inside Screw.
Non-Rising Stem.
Integral Seat.
Solid Wedge.
Flanged Ends As Per Is:778.

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 001

Ships within 30 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 001

By Leader

₹1,533 ~~₹1,577~~

You save ₹44!

2.79% OFF

Leader IS 001 Gun Metal F Gate Valve 20 mm Class - 1 is made from gun metal and has an integral seat in the solid wedge design which means it can be used in both high pressure and low pressure systems. The valve has an inside screw which means that it can be used on a wide range of different pipe sizes and is suitable for use with both hot and cold water systems as well as refrigeration systems and other gases such as air or steam which require temperature control via pressure control valves in order to prevent damage to pipes or other equipment when temperatures become too high or too low inside them due to changes in external conditions like weather conditions outside where they're located (such as wind chill factor while camping outdoors during winter months). The IS 001 Gun Metal Gate Valve is a Class - 1 screw in bonnet, inside screw, non-rising stem B.T.P. - 1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Integral Seat Solid Wedge Cu - alloy valve made by IS:778 International Standards Organization standards for products that are designed to be used in industrial applications with low pressure (under 7 bar) and medium pressure (up to 10 bar). It has a working pressure range of 0 psi (0 bar) to 1450 psi (100 bar), with a flow rate of 11 liters per minute at 10 psi, which makes it suitable for use in many different industries including pharmaceuticals, food processing, and oil & gas production.

Leader 1 Inch, 25 mm Brass Wheel Operated Gate Valve IS 026

Ships within 30 days

Leader 1 Inch, 25 mm Brass Wheel Operated Gate Valve IS 026

By Leader

₹1,651 ~~₹1,729~~

You save ₹78!

4.51% OFF

Leader IS 026 Brass G Forged Gate Valve 25 mm is a heavy duty product that is perfect for industrial applications where high pressures and temperatures are present. This valve has a solid wedge design that prevents wear and tear from occurring over time, making it a sturdy choice for your application needs. The brass material also makes this valve durable enough to withstand harsh environments and conditions such as high temperatures, which means that you won't have to worry about replacing it anytime soon! This valve is made from IS:13114 standard pattern which means that you can use it in any kind of industry or environment without having to worry about compatibility issues or whether or not the product will meet all your needs! The IS 026 D 15 mm Brass Gate Valve is a standard pattern, B.T.P.-certified valve that can be used in a variety of industrial applications. The valve is made of brass, and has an integral seat. It comes with a solid wedge, which ensures that the valve will not leak when it is closed. The valve is designed to withstand high pressures and temperatures while also being able to resist corrosion caused by chemicals used in industrial processes. The valve has a threaded bonnet and comes with 2 MPA screws so you can install it easily. It also has an internal screw design that allows you to adjust the position of the stem after installing the bonnet or stem cap without having to remove any other parts from the assembly.

Leader 6 Inch, 150 mm Cast Iron Lubricated Taper Plug Cock CI 025

Ships within 30 days

Leader 6 Inch, 150 mm Cast Iron Lubricated Taper Plug Cock CI 025

By Leader

₹81,419 ~~₹96,528~~

You save ₹15,109!

15.65% OFF

The CI 025 Cast Iron D Lubricated Taper Plug Cock 15 mm PN - 16 is a straight pattern plug cock that can be used in a range of applications. It is made from cast iron and has a regular pattern, top entry, pressurised lubricant feed and comes without wrench. The pressure rating for this product is 24 bar B.T.P., 17.6 bar S.T.P. The fitting is carbon steel compressed asbestos and it has a clearance of 10 mm between seats and 20 mm between seats and flanges. These cast iron lubricated taper plug cocks are designed for use in pressurised and non-pressurised systems. They have a straight pattern and are available in a range of sizes, with capacities ranging from 16 to 32 mm. They are suitable for use with water, air or oil as the media. The cast iron body is extremely durable, and can withstand harsh environments without becoming damaged or corroded over time. This product is suitable for use in areas where there are high temperatures or pressures present, as well as being able to resist corrosion from salt water or acidic solutions too. It has undergone stringent testing before being approved for use in most countries around the world including Britain and America among others.

Leader CI 094 Cast Iron J Kinetic Air Release Valve 50 mm PN - 1.6

Ships within 30 days

Leader CI 094 Cast Iron J Kinetic Air Release Valve 50 mm PN - 1.6

By Leader

₹20,059 ~~₹22,766~~

You save ₹2,707!

11.89% OFF

Leader 12.7 mm (1/2 Inch), 15 mm D Cast Iron Air Release Valve, CI 047

Ships within 30 days

Leader 12.7 mm (1/2 Inch), 15 mm D Cast Iron Air Release Valve, CI 047

By Leader

₹6,961 ~~₹7,954~~

You save ₹993!

12.48% OFF

The Leader 1/2 inch, 15 mm (CI 047) Cast Iron Air Release Valve is a crucial component in fluid systems, specifically designed to eliminate entrapped air and gases, ensuring optimal performance and efficiency in industrial processes. Crafted with precision from high-quality cast iron, this air release valve stands as a testament to durability and reliability. Engineered to excel in diverse applications such as water supply systems, wastewater treatment plants, and industrial pipelines, the cast iron construction ensures longevity and resilience in challenging environments. The design of the Leader Cast Iron Air Release Valve incorporates advanced features to facilitate the automatic release of air and gases that may accumulate in the system. This promotes efficient operation, preventing issues such as air locking and cavitation, which can adversely affect the performance of pumps and other critical components. The cast iron material enhances the valve's resistance to corrosion, making it particularly suitable for applications where exposure to moisture and aggressive substances is common. The air release valve's ability to enhance system efficiency, reduce maintenance needs, and prevent damage to downstream equipment makes it an indispensable element in fluid management. Whether integrated into water distribution networks or industrial processes, the Leader Cast Iron Air Release Valve exemplifies the brand's commitment to providing reliable and efficient solutions for maintaining the integrity of fluid systems. In summary, the Leader Cast Iron Air Release Valve combines durability, precision engineering, and adherence to industry standards to deliver a high-performance solution for managing air and gases in fluid systems. This valve contributes significantly to the overall reliability and efficiency of industrial processes, underscoring the Leader brand's dedication to providing quality components for fluid control and management.

Leader 2-1/2 inch, 65 mm Cast Iron Butterfly Valve, CI 096

Ships within 30 days

Leader 2-1/2 inch, 65 mm Cast Iron Butterfly Valve, CI 096

By Leader

₹4,011 ~~₹4,406~~

You save ₹395!

8.97% OFF

The Leader 2-1/2 inch, 65 mm (CI 096) Butterfly Valve represents a pinnacle in fluid control technology, offering a versatile and reliable solution for regulating and isolating the flow of fluids in various industrial applications. Crafted with precision engineering and durability in mind, this butterfly valve is designed to provide efficient control and isolation in pipelines, ensuring optimal performance and system integrity. With a streamlined and compact design, the Leader Butterfly Valve is ideal for applications where space is a consideration, such as water treatment plants, HVAC systems, and industrial processes. Constructed from high-quality materials, including durable alloys or ductile iron, this valve exemplifies strength and resilience. The materials used enhance corrosion resistance, making the Leader Butterfly Valve suitable for applications where exposure to aggressive substances is common. The valve's design includes a disc that rotates on a shaft, allowing for quick and precise control of fluid flow. The versatility of the Leader Butterfly Valve is evident in its ability to handle a wide range of pressures and temperatures, making it a reliable choice for diverse industries. Whether used for throttling or isolating flow, this valve provides a cost-effective and efficient solution. Its ease of operation, low maintenance requirements, and compatibility with various actuation methods further contribute to its popularity in fluid control systems. In summary, the Leader Butterfly Valve combines durability, precision engineering, and adaptability to deliver a high-performance fluid control solution. Its robust construction and efficient design make it a trusted choice for engineers and professionals seeking reliable and versatile valves for a wide range of industrial applications.

Leader Cast-Carbon Steel (Astm A 216 Gr Wcb) Gate Valve 30 BAR CL-150

Ships within 30 days

Leader Cast-Carbon Steel (Astm A 216 Gr Wcb) Gate Valve 30 BAR CL-150

By Leader

₹2,12,399 ~~₹2,99,219~~

You save ₹86,820!

29.02% OFF

Key Features:
API:600/bs:1414.
BOLTED BONNET.
OS & YOKE TYPE.
RISING STEM.
FLANGED/BUTT WELD ENDS.

Leader Gun Metal Gate Valve 25 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 30 days

Leader Gun Metal Gate Valve 25 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹6,135

Key Features:
ISI Screwed In Bonnet.
Inside Screw.
Non-Rising Stem.
Integral Seat.
Solid Wedge.
Flanged Ends As Per Is:778.

Page 1 of 54 results

Product Name	Specifications	Expected Price	Dispatch Time	Discount
Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778	--	₹1,096	3 days	--
Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16	Body Material Forged Brass \| Disc Type Teflon	₹5,309	4 days	--
Leader 3 inch, 80 mm Ductile Iron Swing Check Valve, CI 017	--	₹15,339	5 days	18.8% OFF
Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021	--	₹1,829	5 days	--
Leader 2 Inch, 50 mm Cast Iron Butterfly Valve CI 091	Body Material Cast Iron \| Disc Material SG Iron	₹2,858	4 days	--
Leader 3 Inch,80 mm Cast Iron Wafer Type Check Valve CI 038	Body Material Cast Iron \| Disc Material Stainless Steel 304	₹2,138	3 days	--

Leader Products Online

Top Selling Leader Products Online Products Price List for February 2026