• Home /
• All Brands /
• Leader /
• Plumbing /
• Industrial Valves /
• Ball Valves

Have a question? Call us now at +91 9650660070

Leader Ball Valves

Showing 40 out of 297 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 30 days

Leader 1-1/2 Inch, 40 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹7,730  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 1 Inch, 25 mm Gun Metal Ball Valve GM 132

By Leader

₹1,916  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 3 Inch, 80 mm Gun Metal Ball Valve GM 103

By Leader

₹73,616  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 8 Inch, 200 mm Cast Carbon Steel Ball Valve CF8016A

By Leader

₹2,82,602  

The Leader Cast Carbon Steel Ball Valve is a two piece design ball valve that is designed for harsh environment applications. It meets BS EN ISO 17292/API 6D Class 150 standards. It has two port types including B.T.P., S.T.P., as well as air only porting options in accordance with these standards. Made from CF8 steel with SSCR surface treatment and nickel zinc plating, this valve has a stem made from ASTM A276 410 stainless steel. The cast carbon steel body forms an integral part of the stem allowing it to be replaced without dismantling the entire assembly if required. It features renewable RPTFE seals which have excellent reliability and durability in hostile environments unlike metal alloy or plastic seal materials. It handles liquids, gases and steam in process industries including petrochemicals, pharmaceuticals and sugar. The carbon steel device offers mechanical properties at a higher level than cast iron or stainless steel and can be used for handling corrosive fluids at higher temperatures and pressures. This valve also features either stainless steel or carbon steel bolting. Constructed from cast carbon steel, the ball valve can be used for service water and air applications. The highly reliable control provided by the double seal design will ensure that contamination does not enter your system.

Add to Cart Buy Now

Ships within 30 days

Leader 2 Inch, 50 mm Stainless Steel 304 Ball Valve CSS 027

By Leader

₹31,942  

In a competent tone: A ball valve is a type of valve that uses a sphere to control a hole in the pipe. It is one of the most general types of valve, and it also has a wide range of sizes. Ball valves are used to control fluid flow in systems that require shut offs, but they can also be used as on-off valves. The most basic way to classify ball valves is by their orientation; there are vertical, horizontal, and inline valves. These terms are important because each type has its own unique set of requirements for mounting and orientation. Vertical ball valves have an inlet at the bottom and outlet at the top, while horizontal ones have an inlet on one side and outlet on the other. Inline ones have both outlets on the same end, but can also be installed vertically or horizontally if necessary. Technically speaking, all ball valves operate using either a threaded connection or a flanged connection. This means that they all connect to pipes using either nuts or flanges that thread onto ends of pipes or tubing. Flanges are usually used when the pipes being connected are made out of metal, while threaded connections are usually used when pipes are plastic or PVC piping.

Add to Cart Buy Now

Ships within 30 days

Leader 5 Inch, 125 mm Stainless Steel 304 Ball Valve CSS 030

By Leader

₹1,57,182  

The valve is made almost entirely out of stainless steel, which is a very durable material with a high resistance to corrosion. This means that it will stick around for decades to come, whereas some other valves might rust shut within a few years. The handle has been designed with two different positions, as opposed to the single position many valves have. This allows you to hold it in whichever position is most comfortable for you, which can be especially helpful if you have less strength or dexterity in your hands. It also works excellently if you're using the valve in a tight space where there isn't much room for repositioning your hand. There are many different types of valves that come in all shapes and sizes. Ball valves are a type of plug valve that is used to control the flow of liquids or gases through a pipe. It is usually located within a section of pipe with 2 ports which allow fluid to pass in and out of the system. The ball valve itself is shaped like a ball, hence the name. It has two holes for pipes to connect to, but the interesting thing about it is that there is an opening between those two openings that allows fluid to pass through. When you turn the handle at the top, this opening will rotate and open up more or close off more, which then controls how much fluid passes through the system.</p> <p>Ball valves are very common in water systems because they can control water flow quite well; however it is also used in gas systems and even vacuum systems as well. They are able to withstand high temperatures due to their construction, but be careful when working with them because they can break easily if not handled properly. You should never use your bare hands to operate this equipment because you could get burned or injured if it breaks apart on you unexpectedly.

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/2 Inch, 40 mm Cast Carbon Steel Ball Valve CCS 016

By Leader

₹11,010  

Leader CCS 016 is a ball valve, class - 150 that is suitable for applications where flanges do not exist. The design of the body makes it suitable for heavy duty service and it comes with a one piece body design ensuring durability. It is made using high quality cast carbon steel and has a floating ball. It has lever actuation that makes it easy to operate. The floating ball type design allows for easy installation and replacement of seats, giving you the ability to customize your valve without having to remount the body of the valve. The Leader Cast Carbon Steel Ball Valve is ideally suited for applications where performance and durability are critical. The unique carbon steel alloy has excellent strength and corrosion resistance properties, while the forged one-piece construction provides extra strength and rugged reliability. The valve body design, with a floating ball, lever operated butterfly valve and large bore size create a long life cycle for both liquids and gases. This heavy duty ball valve features a floating ball and handle right hand operation. It has been designed for use with either air or water and has been designed for easy installation. Leader Ball Valve is made of high quality cast carbon steel, and the body with stainless steel. It has a two-piece floating ball design, and can be opened or closed by hand or by electric switch or controller. The ball valve is suitable for various mediums such as gas, oil and water.

Add to Cart Buy Now

Ships within 30 days

Leader Ball Valve With Strainer 20 mm (3/4 inch) Forged Brass Body PN-20 Pressure/Class Rating Size Code F, FLB 285

By Leader

₹2,005  

The Leader Ball Valve With Strainer 20 mm (3/4 inch) Forged Brass Body PN-20 Pressure/Class Rating Size Code F, FLB 285 is a durable and reliable plumbing component designed for efficient flow control and filtration in water systems. It features a strong forged brass body that ensures high strength, corrosion resistance, and long service life even under demanding conditions. The integrated strainer helps in filtering out unwanted particles and debris, protecting downstream equipment and maintaining smooth operation. Designed to handle PN-20 pressure rating, this valve is suitable for both residential and commercial applications where consistent performance is required. Built for ease of use, the valve provides smooth operation with secure shut-off control, ensuring minimal leakage and efficient flow regulation. Its compact and sturdy design allows easy installation in various piping systems. Ideal for water supply lines, industrial setups, and maintenance applications, this ball valve with strainer offers a combination of durability, safety, and performance. It is a practical solution for ensuring clean and controlled fluid flow in everyday applications.

Add to Cart Buy Now

Ships within 30 days

Leader 1 Inch, 25 mm Cast Carbon Steel Ball Valve WCB 012

By Leader

₹3,408  

The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is a high-quality valve that helps maintain the integrity of your pipeline, while also helping you to save money over time by reducing maintenance costs and increasing efficiency in your operations. The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is made with precision manufacturing technology, so it will last for years without needing frequent replacements like other low-quality valves on the market today! You'll have peace of mind knowing that when you choose one of these valves for your business, it's going to work as hard as you. A ball valve is a kind of valve that controls the flow of a substance. The ball is located at the end of a stem or shaft, and can be moved to open or close off flow through the valve. Cast carbon steel ball valves are commonly used in industrial settings because they are corrosion resistant, durable, and economical. These valves are typically installed in places where there is high temperature or pressure, such as in chemical plants or power plants. They can also be used for fluid control applications such as in manufacturing, water treatment plants, and oil refineries.

Add to Cart Buy Now

Ships within 30 days

Leader 1 Inch, 25 mm Stainless Steel Ball Valve CF8M 012

By Leader

₹4,078  

The CF8M 012 CSS (Stainless Steel) Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 316 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is a three-piece design ball valve made of stainless steel, which makes it ideal for use in corrosive environments such as chemical plants and refineries. The valve has a three-piece design for ease of maintenance and cleaning, as well as an anti-rotation feature that keeps it from turning on its own during operation or repair work. This model also features an adjustable seat ring that allows you to adjust the valve's opening pressure on the fly so you can control how much fluid flows through your system at any given time without having to shut off your entire operation just because you need to make some minor adjustments! Additionally, this valve has been tested by an independent testing lab according to ASTM standards and has passed all tests with flying colors: including tests for corrosion resistance, flow rate consistency (no matter what angle you turn it),

Add to Cart Buy Now

Ships within 30 days

Leader 1 Inch, 25 mm Stainless Steel Ball Valve CSS 012

By Leader

₹3,902  

This valve has a body made of stainless steel, which is highly resistant to corrosion. The design of this valve allows it to withstand high pressure. It also prevents leakage from occurring. This valve has been certified by an independent testing laboratory as conforming to BS EN ISO 17292 class - 800 for use in low pressure applications with a maximum working pressure of 178 bar. It also conforms to B.T.P certification for use in higher pressure applications with a maximum working pressure of 76 bar, as well as S.T.P certification for use in higher temperature applications with a maximum working temperature of 6.9 bar (for air). The seat ring and gland packing are made from PTFE material and can withstand high temperatures without leaking or degrading over time due to wear and tear caused by friction against other parts within your system (such as other components within your piping system). The body is made of 304L or 316L stainless steel, and the stem and seat are made of AISI 316L stainless steel. The valve is rated for a maximum operating pressure of 178 bar at 50C, while the hydrodynamic back pressure rating is 76 bar at 50C. The ball has a diameter of 15 mm, and the stem has a length of 6.9 mm. This valve uses PTFE for both the seat ring and gland packing.

Add to Cart Buy Now

Ships within 30 days

Leader 3/4 Inch, 20 mm Stainless Steel Ball Valve CSS 012

By Leader

₹2,654  

This valve has a body made of stainless steel, which is highly resistant to corrosion. The design of this valve allows it to withstand high pressure. It also prevents leakage from occurring. This valve has been certified by an independent testing laboratory as conforming to BS EN ISO 17292 class - 800 for use in low pressure applications with a maximum working pressure of 178 bar. It also conforms to B.T.P certification for use in higher pressure applications with a maximum working pressure of 76 bar, as well as S.T.P certification for use in higher temperature applications with a maximum working temperature of 6.9 bar (for air). The seat ring and gland packing are made from PTFE material and can withstand high temperatures without leaking or degrading over time due to wear and tear caused by friction against other parts within your system (such as other components within your piping system). The body is made of 304L or 316L stainless steel, and the stem and seat are made of AISI 316L stainless steel. The valve is rated for a maximum operating pressure of 178 bar at 50C, while the hydrodynamic back pressure rating is 76 bar at 50C. The ball has a diameter of 15 mm, and the stem has a length of 6.9 mm. This valve uses PTFE for both the seat ring and gland packing.

Add to Cart Buy Now

Ships within 30 days

Leader 6 Inch, 150 mm Cast Carbon Steel Ball Valve CCS 016

By Leader

₹1,21,710  

Leader CCS 016 is a ball valve, class - 150 that is suitable for applications where flanges do not exist. The design of the body makes it suitable for heavy duty service and it comes with a one piece body design ensuring durability. It is made using high quality cast carbon steel and has a floating ball. It has lever actuation that makes it easy to operate. The floating ball type design allows for easy installation and replacement of seats, giving you the ability to customize your valve without having to remount the body of the valve. The Leader Cast Carbon Steel Ball Valve is ideally suited for applications where performance and durability are critical. The unique carbon steel alloy has excellent strength and corrosion resistance properties, while the forged one-piece construction provides extra strength and rugged reliability. The valve body design, with a floating ball, lever operated butterfly valve and large bore size create a long life cycle for both liquids and gases. This heavy duty ball valve features a floating ball and handle right hand operation. It has been designed for use with either air or water and has been designed for easy installation. Leader Ball Valve is made of high quality cast carbon steel, and the body with stainless steel. It has a two-piece floating ball design, and can be opened or closed by hand or by electric switch or controller. The ball valve is suitable for various mediums such as gas, oil and water.

Add to Cart Buy Now

Ships within 30 days

Leader 6 Inch, 150 mm Cast Carbon Steel Ball Valve CF8M016A

By Leader

₹1,49,230  

The CF8M016A cast carbon steel D ball valve is a model that features a two-piece design and floating ball lever operation. With the risk of contamination from coughing and sneezing, this model ensures all air flows out of your house instead of returning through drafts. The Leader Cast Carbon Steel Ball Valve is a special feature valve with a two piece ball plunger design. This type of construction allows the valve to be opened and shut, allowing the flow of liquids through a pipeline. This durable valve is constructed of high quality materials and has a 2 piece design. All Leader valves are hand tested before packaging to ensure performance and quality. This ball valve is designed for applications that require non-corroding, high solids flow and full port size availability in a compact design. This class 150 model offers a dual design with a two piece body construction, allowing easier installation and maintenance. Its two-piece solid construction also adds strength to prevent bowing (which can cause potential leak points), while its replaceable stainless steel spherical ball provides reliable reliability and minimal maintenance throughout its service life. It features a floating ball and lever operated handle, which ensures superior performance and reliability in all applications.

Add to Cart Buy Now

Ships within 30 days

Leader Ball Valve With Strainer 32 mm (1-1/4 inch) Forged Brass Body PN-20 Pressure/Class Rating Size Code H, FLB 285

By Leader

₹3,657  

The Leader Ball Valve With Strainer 32 mm (1-1/4 inch) Forged Brass Body PN-20 Pressure/Class Rating Size Code H, FLB 285 is a durable and reliable plumbing component designed for efficient flow control and filtration in water systems. It features a strong forged brass body that ensures high strength, corrosion resistance, and long service life even under demanding conditions. The integrated strainer helps in filtering out unwanted particles and debris, protecting downstream equipment and maintaining smooth operation. Designed to handle PN-20 pressure rating, this valve is suitable for both residential and commercial applications where consistent performance is required. Built for ease of use, the valve provides smooth operation with secure shut-off control, ensuring minimal leakage and efficient flow regulation. Its compact and sturdy design allows easy installation in various piping systems. Ideal for water supply lines, industrial setups, and maintenance applications, this ball valve with strainer offers a combination of durability, safety, and performance. It is a practical solution for ensuring clean and controlled fluid flow in everyday applications.

Add to Cart Buy Now

Ships within 30 days

Leader 4 Inch, 100 mm Gun Metal Ball Valve GM 103

By Leader

₹1,05,044  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 2 Inch, 50 mm Gun Metal Ball Valve GM 103

By Leader

₹47,168  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/2 Inch, 40 mm Gun Metal Ball Valve GM 103

By Leader

₹41,979  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 1 Inch, 25 mm Gun Metal Ball Valve GM 103

By Leader

₹21,648  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 3/4 Inch, 20 mm Gun Metal Ball Valve GM 103

By Leader

₹17,834  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 12.7 mm (1/2 Inch), 15 mm Gun Metal Ball Valve GM 103

By Leader

₹16,279  

This model has a single piece design, which makes it easier to install and maintain than other valves that require more parts and connections to work properly. It also features an easy-to-operate lever handle and is available in a variety of sizes, so you can choose one that fits your needs perfectly! The GM 103 gun metal ball valve is made of carbon steel and has an easy-to-operate lever handle with a spring return function to keep it closed or open. The one piece design means there are no joints or seams to leak or wear out over time, making this valve ideal for high pressure applications such as water treatment plants and industrial facilities where water needs to be cleaned before being delivered to homes or businesses nearby. The venturi port allows for easy installation because there is no need for adapters or reducers before connecting it to your existing piping system; just connect it directly onto existing pipes without any tools required! The GM 103 Gun Metal Ball Valve is a one piece design with a venturi port and lever operated B.T.P. at 30 bar and S.T.P. at 22 bar hydraulic pressure. The valve has a bronze body with a gun metal finish, which helps prevent corrosion in high-pressure applications where moisture is present, as well as industrial environments that contain chemicals or other corrosive materials that can damage ordinary steel parts over time (such as oil refineries).

Add to Cart Buy Now

Ships within 30 days

Leader 4 Inch, 100 mm Gun Metal Ball Valve GM 132

By Leader

₹57,020  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 3 Inch, 80 mm Gun Metal Ball Valve GM 132

By Leader

₹28,226  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 2-1/2 Inch, 65 mm Gun Metal Ball Valve GM 132

By Leader

₹18,260  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 2 Inch, 50 mm Gun Metal Ball Valve GM 132

By Leader

₹6,526  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/2 Inch, 40 mm Gun Metal Ball Valve GM 132

By Leader

₹4,748  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/4 Inch, 32 mm Gun Metal Ball Valve GM 132

By Leader

₹3,175  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 3/4 Inch, 20 mm Gun Metal Ball Valve GM 132

By Leader

₹1,267  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 12.7 mm (1/2 Inch), 15 mm Gun Metal Ball Valve GM 132

By Leader

₹875  

GM 132 Gun Metal Ball Valve CL - 150 Straight Two Piece Design, Lever Operated B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Renewable PTFE Seat Full Bore Brass HT Brass This GM 132 Gun Metal Ball Valve is a two-piece design, lever operated valve with a straight pattern and a full bore brass body. The CL150 represents the size in millimeters of the diameter of the ball inside of the valve body; this valve has a 1/2" diameter ball in its body, which makes it suitable for use in applications where there is a need for a large flow rate. The CL150 is also available in smaller sizes if you need something smaller than that to serve as the control valve on your system; please consult our website or call our sales team for more information on what we have available for you! Food Processing, Pharmaceuticals and Cosmetics, Sanitary and Hygiene, Chemical Manufacturing and Distribution, Petrochemicals and Refining, Oil & Gas Exploration & Production, Water Treatment Plants. The full bore configuration has a brass body and stainless steel trim with no seal at all—it's completely open on both ends, which allows you to use it as an on/off valve or as part of your system's piping system without having to worry about leaking between different components due to incompatible materials (such as plastic fittings). The B.T.P. and S.T.P. ratings on this valve indicate that it can handle both high and low pressure applications, making it the perfect choice for a wide range of industrial applications and settings. This valve also has a lever-operated design that makes it easy to open and close, even when you're working in tough conditions or under pressure!

Add to Cart Buy Now

Ships within 30 days

Leader 3/4 Inch, 20 mm Forged Cast Steel Ball Valve FCS 016

By Leader

₹3,050  

FCS 016 Forged Cast Steel Ball Valve BS:EN 17292 Class - 800 3 Pcs is a forged cast steel ball valve that is used for handling liquids in the process industry sectors, including chemical and petrochemical industries, oil refineries, power generation plants and other types of industrial facilities and processes where liquid flow needs to be controlled or monitored by means of a valve mechanism in order to maintain safe working conditions for personnel or equipment during operation or maintenance activities onsite as part of daily routine operations as part of daily routine operations conducted by staff members who work onsite at these locations where potential hazards exist due to exposure to any dangerous substances contained within pipes connected to each other using pipe fittings made out of material which can be easily damaged due to constant vibrations caused by sound waves generated when water flows. The FCS 016 Forged Cast Steel D Ball Valve 15 mm Class - 800 is a fully forged steel ball valve that is designed for use in applications with high pressure, such as gas and oil. The valve has a full bore design, which means it can be used in high pressure applications without losing any of its performance. The FCS 016 is made from stainless steel and features a 6.9 bar air seat, which means that it can be used with air-actuated actuators or pumps. The ball is made from stainless steel CF8 and has a full bore design.

Add to Cart Buy Now

Ships within 30 days

Leader 12.7 mm (1/2 Inch), 15 mm Forged Cast Steel Ball Valve FCS 016

By Leader

₹2,148  

FCS 016 Forged Cast Steel Ball Valve BS:EN 17292 Class - 800 3 Pcs is a forged cast steel ball valve that is used for handling liquids in the process industry sectors, including chemical and petrochemical industries, oil refineries, power generation plants and other types of industrial facilities and processes where liquid flow needs to be controlled or monitored by means of a valve mechanism in order to maintain safe working conditions for personnel or equipment during operation or maintenance activities onsite as part of daily routine operations as part of daily routine operations conducted by staff members who work onsite at these locations where potential hazards exist due to exposure to any dangerous substances contained within pipes connected to each other using pipe fittings made out of material which can be easily damaged due to constant vibrations caused by sound waves generated when water flows. The FCS 016 Forged Cast Steel D Ball Valve 15 mm Class - 800 is a fully forged steel ball valve that is designed for use in applications with high pressure, such as gas and oil. The valve has a full bore design, which means it can be used in high pressure applications without losing any of its performance. The FCS 016 is made from stainless steel and features a 6.9 bar air seat, which means that it can be used with air-actuated actuators or pumps. The ball is made from stainless steel CF8 and has a full bore design.

Add to Cart Buy Now

Ships within 30 days

Leader 2 Inch, 50 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹18,520  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/4 Inch, 32 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹5,900  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 1 Inch, 25 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹4,446  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 3/4 Inch, 20 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹3,408  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 12.7 mm (1/2 Inch), 15 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹2,356  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 3/8 Inch, 10 mm Cast Carbon Steel Ball Valve WCB 013

By Leader

₹1,926  

The WCB 013 is a fully welded, three-piece design ball valve with a cast iron body and a stainless steel stem and seat ring/gland packing that meets the requirements of BS EN ISO 17292 Class 800 for use below ground level in potable water applications at elevated temperatures up to 90°C and pressures up to 178 bar (2,200 PSI). The stem is designed for renewal without the need for disassembly by threading onto the valve body when required. The internal surfaces are treated with an anticorrosive compound, which is bonded to the metal surface using a proprietary process and then baked on at high temperature to produce a durable finish that will not erode away under normal operating conditions or degrade over time as can occur with other surface treatments used in this industry today. The external surfaces are protected from corrosion by a high-quality. This ball valve can handle up to 178 bar Hyd. in the seal and 76 bar Hyd. at the seat. The ball on this valve has a renewable seat stem and ball made of stainless steel (ASTM A 182 304 or its equivalent). The seat ring and gland packing are made of PTFE. This valve has a full bore design so it will fit most piping systems.

Add to Cart Buy Now

Ships within 30 days

Leader 2 Inch, 50 mm Cast Carbon Steel Ball Valve WCB 012

By Leader

₹7,730  

The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is a high-quality valve that helps maintain the integrity of your pipeline, while also helping you to save money over time by reducing maintenance costs and increasing efficiency in your operations. The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is made with precision manufacturing technology, so it will last for years without needing frequent replacements like other low-quality valves on the market today! You'll have peace of mind knowing that when you choose one of these valves for your business, it's going to work as hard as you. A ball valve is a kind of valve that controls the flow of a substance. The ball is located at the end of a stem or shaft, and can be moved to open or close off flow through the valve. Cast carbon steel ball valves are commonly used in industrial settings because they are corrosion resistant, durable, and economical. These valves are typically installed in places where there is high temperature or pressure, such as in chemical plants or power plants. They can also be used for fluid control applications such as in manufacturing, water treatment plants, and oil refineries.

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/2 Inch, 40 mm Cast Carbon Steel Ball Valve WCB 012

By Leader

₹5,900  

The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is a high-quality valve that helps maintain the integrity of your pipeline, while also helping you to save money over time by reducing maintenance costs and increasing efficiency in your operations. The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is made with precision manufacturing technology, so it will last for years without needing frequent replacements like other low-quality valves on the market today! You'll have peace of mind knowing that when you choose one of these valves for your business, it's going to work as hard as you. A ball valve is a kind of valve that controls the flow of a substance. The ball is located at the end of a stem or shaft, and can be moved to open or close off flow through the valve. Cast carbon steel ball valves are commonly used in industrial settings because they are corrosion resistant, durable, and economical. These valves are typically installed in places where there is high temperature or pressure, such as in chemical plants or power plants. They can also be used for fluid control applications such as in manufacturing, water treatment plants, and oil refineries.

Add to Cart Buy Now

Ships within 30 days

Leader 1-1/4 Inch, 32 mm Cast Carbon Steel Ball Valve WCB 012

By Leader

₹4,446  

The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is a high-quality valve that helps maintain the integrity of your pipeline, while also helping you to save money over time by reducing maintenance costs and increasing efficiency in your operations. The WCB 012 Cast Carbon Steel Ball Valve BS EN ISO 17292 Class - 800 Three Piece Design B.T.P. - 178 Bar Hyd. S.T.P. - 76 Bar Hyd. 6.9 Bar (AIR) Renewable Seat Stem & Ball : SS (ASTM A 182 304 or its Eq.) Seat Ring & Gland Packing PTFE Regular Bore is made with precision manufacturing technology, so it will last for years without needing frequent replacements like other low-quality valves on the market today! You'll have peace of mind knowing that when you choose one of these valves for your business, it's going to work as hard as you. A ball valve is a kind of valve that controls the flow of a substance. The ball is located at the end of a stem or shaft, and can be moved to open or close off flow through the valve. Cast carbon steel ball valves are commonly used in industrial settings because they are corrosion resistant, durable, and economical. These valves are typically installed in places where there is high temperature or pressure, such as in chemical plants or power plants. They can also be used for fluid control applications such as in manufacturing, water treatment plants, and oil refineries.

Add to Cart Buy Now

Previous Next

Page 1 of 8 results