• Home /
• All Brands /
• Leader /
• Plumbing /
• Industrial Valves /
• Check Valves

Have a question? Call us now at +91 9650660070

Leader Check Valves

Showing 40 out of 556 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 4 days

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

By Leader

₹2,713  

Key Features:
Isi Screwed In Cover.
Integral Seat.
Screwed Female Threads To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹1,415   ₹1,423

You save ₹8!

0.56% OFF

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Add to Cart Buy Now

Ships within 8 days

Leader 2 Inch,50 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹4,011   ₹4,065

You save ₹54!

1.33% OFF

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Add to Cart Buy Now

Ships within 8 days

Leader 1-1/2 Inch,40 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹2,762  

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Add to Cart Buy Now

Related Searches

leader check valves cast iron

leader check valves

leader cast carbon steel check valves

cast carbon steel check valves

leader check valves cast carbon steel

Ships within 8 days

Leader 4 Inch, 100 mm Cast Iron Reflux Valve CI 021

By Leader

₹16,519   ₹17,004

You save ₹485!

2.85% OFF

This is a CI 021 Cast Iron Reflux Valve IS: 5312 PN - 1.6 Bolted Cover B.T.P. - 2.4 MPa Hyd.S.T.P. - 1.6 MPa Hyd that is made from the best quality raw materials and is manufactured by our experts based on the international standards and industry norms using latest technology and sophisticated machinery with complete adherence to all safety measures and guidelines laid down by the government or industry bodies so that it can be used in various industries like oil refineries, petrochemicals, chemical plants etc without any problem because of its excellent quality in terms of strength, durability etc and also ensures long lasting performance without any maintenance cost so as to provide excellent value for money to our esteemed customers in various industries across the globe. This product has been tested and meets the standards outlined in IS:5312, which are accepted throughout the International community as an industry benchmark for quality assurance and consistency of product performance. This product is made with durable cast iron, which makes it durable enough to withstand high temperatures and pressures, while also being lightweight enough for easier installation and maintenance by operators or technicians who work on the system regularly or only occasionally need access to the valve itself (depending on how often you intend on using your unit).

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch,150 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹4,601   ₹4,720

You save ₹119!

2.52% OFF

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Add to Cart Buy Now

Ships within 8 days

Leader 8 Inch,200 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹8,849   ₹9,570

You save ₹721!

7.53% OFF

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Add to Cart Buy Now

Ships within 8 days

Leader 4 Inch,100 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹3,067   ₹3,132

You save ₹65!

2.08% OFF

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Add to Cart Buy Now

Ships within 8 days

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹7,079  

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Add to Cart Buy Now

Ships within 8 days

Leader Swing Check Valve 20 mm (3/4 inch) Forged Brass Body PN-20 Pressure/Class Rating Size Code F, FLB 045

By Leader

₹766  

The Leader Swing Check Valve 20 mm (3/4 inch) Forged Brass Body PN-20 Pressure/Class Rating Size Code F, FLB 045 is a durable and reliable plumbing component designed for efficient flow control and filtration in water systems. It features a strong forged brass body that ensures high strength, corrosion resistance, and long service life even under demanding conditions. The integrated strainer helps in filtering out unwanted particles and debris, protecting downstream equipment and maintaining smooth operation. Designed to handle PN-20 pressure rating, this valve is suitable for both residential and commercial applications where consistent performance is required. Built for ease of use, the valve provides smooth operation with secure shut-off control, ensuring minimal leakage and efficient flow regulation. Its compact and sturdy design allows easy installation in various piping systems. Ideal for water supply lines, industrial setups, and maintenance applications, this ball valve with strainer offers a combination of durability, safety, and performance. It is a practical solution for ensuring clean and controlled fluid flow in everyday applications.

Add to Cart Buy Now

Ships within 8 days

Leader 2 Inch,50 mm Bronze Horizontal Lift Check Valve IS 024

By Leader

₹20,059   ₹21,387

You save ₹1,328!

6.21% OFF

The IS 024 Gun Metal Horizontal Lift Check Valve is a Class 2, 2-screwed cover with a screwed in cover, 2.4MPa B.T.P., 1.6MPa S.T.P., and integral seat Cu-alloy design. The IS 024 Gun Metal Horizontal Lift Check Valve is used for regulating the flow of liquids, gases, or steam through a pipeline system. It can be used as an isolation valve or as a portion of a larger control system. The IS 024 Gun Metal Horizontal Lift Check Valve has a working pressure of up to 2.4 MPa, which allows it to handle high-pressure fluids without damage to itself or the pipeline system in which it is installed. The valve also has an operating temperature range of -20°C to 80°C (-4°F to 176°F), making it suitable for use in a variety of applications across different global regions throughout the year without requiring any additional modifications prior to installation or use."
The IS 024 Gun Metal Horizontal Lift Check Valve is a Class 2, screwed-in cover, B.T.P. 2.4 MPa / S.T.P. 1.6 MPa hydrated seat check valve that is suitable for use in water and wastewater treatment plants, as well as industrial processes that require watertight seals. This vertical lift check valve has an integral seat made of copper alloy and has an operating pressure range of 150 psi to 2000 psi for both hot and cold water applications. This check valve features a gun metal body with anodized aluminum bonnet, which makes this product ideal for a wide range of applications in the chemical industry and other industries where corrosion resistance is important.

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch,25 mm Bronze Horizontal Lift Check Valve IS 023

By Leader

₹3,067   ₹3,341

You save ₹274!

8.2% OFF

The IS 023 horizontal lift check valve is a Class 2, screwed-in cover, B.T.P. 2.4 MPa hyd. and S.T.P. 1.6 MPa hyd. integral seat cu-alloy design with a hydraulically actuated disc which lifts off its seat to allow flow in one direction and closes when flow ceases to block reverse flow or backflow through the line. The design is suitable for use in low temperature applications where light weight is important and where there are no corrosive fluids involved. The IS 023 Gun Metal Horizontal Lift Check Valve is a 2-way, 2-port valve designed for use in industrial applications. It features an integral seat made of copper alloy that provides superior performance and long life. This valve allows flow from port 1 to port 2 when open, and it prevents flow from port 2 to port 1 when closed. The seat is designed with an internal groove that helps prevent the formation of debris, reducing the risk of premature failure. This IS 023 Gun Metal Horizontal Lift Check Valve is made of gun metal and carbon steel with screwed in cover, it is used to prevent the back flow of fluid, it has been designed with high quality material and advanced technology, which is durable enough to use for many years, the size of this product can be customized according to the customers' requirements, it is widely used in petroleum, chemical industry and other industries that need to prevent the backflow of fluid and liquid substance such as water treatment plants etc.

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

By Leader

₹2,241  

The IS 021 is a gun metal horizontal lift check valve designed for use in piping systems where the flow must be stopped when the system pressure reaches a predetermined value (the actuation pressure). The valve is manufactured from gun metal and has a screwed-in cover, which provides protection against damage to the sealing face by foreign objects entering the system or accidental contact with hot surfaces during maintenance work on other parts of the system The IS 021 is suitable for use in systems in which there are high pressures or temperatures, such as those found in chemical or petrochemical plants, boiler houses, power stations, etc., but is also suitable for use in general industrial applications requiring automatic shutoff of liquids and gases at predetermined pressures (actuation pressures). This Horizontal Lift Check Valve is manufactured from gun metal and a single piece of solid steel mandrel with integral seats and pressure valves for the cleanest, most reliable seal possible. The body is manufactured from gun metal, with integral seat, spring loaded poppet valves and pre-set at the factory to ensure a leak free seal when installed correctly with no further adjustment required (unless damaged). The IS 021 is a gun metal Horizontal Lift Check Valve that is used to prevent backflow of water or steam into a system when it is not in operation, or under pressure. It has a screwed in cover with a BSP male thread on one end and an integral seat cu-alloy on the other end to provide a seal against pressure. The valve has been designed for use at temperatures ranging from -20°C to +100°C with pressure ratings between 1 and 2 MPa

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve GM 033

By Leader

₹2,359   ₹2,471

You save ₹112!

4.53% OFF

It is a high-quality check valve that you can use to prevent backflow in your home or business plumbing system, making sure that there is no chance of unwanted water from entering your home or office when you aren't expecting it. This check valve has a working pressure of 24 bar and a maximum flow rate of 17.6 bar, which means that it can handle higher pressures than most other check valves on the market today—no matter what kind of water pressure you're dealing with! It's made with CRS material for maximum durability and resistance to corrosion, so you won't have to worry about this product failing over time or becoming damaged when exposed to harsh conditions like saltwater or even indoor pool chemicals! It comes with an integral seat cup made from alloy resiliency disc (nitrile rubber), which means that even if there is some damage done to this cup while using it in your plumbing system. The valve is designed to prevent backflow of fluids, and it can be used to protect pumps, motorized valves and other equipment in industrial applications or water supply systems. The Gun Metal Horizontal Lift Check Valve is a high performance product that is designed to provide you with the best possible experience. This check valve is made of quality materials and comes with an integral seat and resilient disc made of copper and nitrile rubber, respectively. The Gun Metal Horizontal Lift Check Valve is designed to be used in both hot and cold water systems, with a maximum pressure of 24 bar. It is also suitable for use in food processing plants, as well as other areas where hygiene is of paramount importance.

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch,150 mm Gun Metal Horizontal Lift Check Valve GM 030

By Leader

₹66,079   ₹71,411

You save ₹5,332!

7.47% OFF

The GM 030 Gun Metal Horizontal Lift Check Valve BS : 5154 PN - 16 Screwed in Cover B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Integral Seat Cu-alloy is a high-quality check valve manufactured by [company name]. It's designed to work in horizontal lift applications and has a working pressure of between 24 and 17.6 bar, depending on which version of the product you purchase. The GM 030 Gun Metal Horizontal Lift Check Valve BS : 5154 PN - 16 Screwed in Cover B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd is made from high-quality materials that are designed to last for a long time without breaking down or malfunctioning unexpectedly (which can happen with some other models). This means that you won't have to worry about your equipment getting damaged by faulty products—you can just focus on running your business! This product has been tested thoroughly by professionals at our company to ensure that it meets all specifications for quality control standards set forth by our industry body. The valve also has a gun metal finish, which helps it resist corrosion and improve its resistance to chemicals such as chlorine and acids that may be present in the environment where it is being used. It is made from gun metal and has an integral seat made from copper alloy, which helps to ensure that the valve closes properly and does not leak when it is closed. The valve is available in a variety of materials, sizes and configurations to suit your application needs.

Add to Cart Buy Now

Ships within 8 days

Leader 1/4 Inch,8 mm Gun Metal Horizontal Lift Check Valve GM 030

By Leader

₹511  

The GM 030 Gun Metal Horizontal Lift Check Valve BS : 5154 PN - 16 Screwed in Cover B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Integral Seat Cu-alloy is a high-quality check valve manufactured by [company name]. It's designed to work in horizontal lift applications and has a working pressure of between 24 and 17.6 bar, depending on which version of the product you purchase. The GM 030 Gun Metal Horizontal Lift Check Valve BS : 5154 PN - 16 Screwed in Cover B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd is made from high-quality materials that are designed to last for a long time without breaking down or malfunctioning unexpectedly (which can happen with some other models). This means that you won't have to worry about your equipment getting damaged by faulty products—you can just focus on running your business! This product has been tested thoroughly by professionals at our company to ensure that it meets all specifications for quality control standards set forth by our industry body. The valve also has a gun metal finish, which helps it resist corrosion and improve its resistance to chemicals such as chlorine and acids that may be present in the environment where it is being used. It is made from gun metal and has an integral seat made from copper alloy, which helps to ensure that the valve closes properly and does not leak when it is closed. The valve is available in a variety of materials, sizes and configurations to suit your application needs.

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch,80 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹2,359  

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Add to Cart Buy Now

Ships within 8 days

Leader 1-1/2 Inch,40 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹1,297   ₹1,334

You save ₹37!

2.77% OFF

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch,150 mm Cast Carbon Steel Dual Plate Check Valve CCS 069

By Leader

₹23,599   ₹24,618

You save ₹1,019!

4.14% OFF

CCS 069 is a cast carbon steel dual plate check valve with wafer type and spring loaded bonnet (B.T.P.), manufactured in accordance with API 594 and IEC 60904 standards. It has an operating pressure of up to 30 bar and is recommended for use in hydrostatic applications. The CCS 069 dual plate check valve is suitable for use in the following application: Oilfield installation and offshore oil rigging service, Gas industry, Water treatment plant installation and industrial plant installations and steel mill environment etc. This CCS 069 Dual Plate Check Valve having a high impact rating, is designed for use in high pressure, low pressure and medium temperature applications. These valves can handle high pressure, moderate temperature and medium pressure applications. The disc is made up of high quality that ensures to offer a maximum corrosion resistance. The valve operates at high pressure applications where control and shut off require minimum flow rate with simultaneous control of gases, vapours, liquids and other materials. The disc seat and the valve are assembled in the head of the body, which is made of cast iron having a threaded case connection. The closure element is provided by a rectangular double-acting spring seated on top of the discs.

Add to Cart Buy Now

Ships within 8 days

Leader Dual Plate Check Valve Wafer Type Spring Loaded (12 inch) 300 mm Ductile Iron Body PN-25 Size Code T, DI 084

By Leader

₹75,519  

Leader Dual Plate Check Valve Wafer Type Spring Loaded (12 inch) 300 mm Ductile Iron Body PN-25 Size Code T, DI 084 is a reliable and efficient industrial component designed for smooth flow control in various piping systems. It is commonly used in water supply, irrigation, HVAC, and general engineering applications. Built with durable materials, it ensures long service life and consistent performance even under demanding working conditions. The design allows easy installation and operation, making it suitable for both new projects and replacement purposes. Its compact structure helps save space while maintaining high efficiency in controlling the flow of liquids or gases. This product is engineered to provide stable performance with minimal maintenance requirements. It offers precise control and helps improve overall system efficiency by reducing leakage and pressure loss. Suitable for a wide range of environments, it can be used in commercial, residential, and industrial setups. The simple mechanism ensures user-friendly operation, while the robust construction enhances safety and reliability. Overall, Leader Dual Plate Check Valve Wafer Type Spring Loaded (12 inch) 300 mm Ductile Iron Body PN-25 Size Code T, DI 084 is a practical choice for users looking for durability, performance, and ease of use in everyday applications.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch,20 mm Brass Universal Check Valve FLB 048

By Leader

₹695   ₹753

You save ₹58!

7.7% OFF

The valve is made from forged brass for durability and reliability, and has an operating pressure of up to 24 bar with a resilient seat design that prevents damage from impact or shock when it comes into contact with unwanted particles such as sand or dirt while still allowing water to pass through smoothly without clogging up your system's pipes! It also features a double-seal design that ensures no leaks occur during operation by sealing off both ends of each chamber separately—one end seals against pressure differences between chambers (known as differential pressure), while another end seals against leaks caused by moving parts inside each chamber itself (known as leakage). The FLB 048 Forged Brass Universal Check Valve is a resilient seated check valve that has been designed specifically for use in water and wastewater applications where corrosion resistance is essential, as well as in combination with other products such as ball valves, globe valves and butterfly valves. The valve is manufactured from forged brass which has been subjected to a special heat treatment process that ensures the valves are resistant to corrosion and wear over time. The valve consists of a body made from forged brass which provides excellent resistance to corrosion and wear over time, while also providing excellent flow characteristics at low pressure drops across the seal face area thanks to its large sealing surface area. The body has an internal diameter of 38mm and includes two pressure retaining springs on either side which ensure that the valve remains closed when pressurized until sufficient force is applied against them so as to overcome their resilience forces before opening up fully again once released pressure has been removed again from those same springs within this same.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch,20 mm Brass Universal Check Valve FLB 048

By Leader

₹695   ₹753

You save ₹58!

7.7% OFF

The valve is made from forged brass for durability and reliability, and has an operating pressure of up to 24 bar with a resilient seat design that prevents damage from impact or shock when it comes into contact with unwanted particles such as sand or dirt while still allowing water to pass through smoothly without clogging up your system's pipes! It also features a double-seal design that ensures no leaks occur during operation by sealing off both ends of each chamber separately—one end seals against pressure differences between chambers (known as differential pressure), while another end seals against leaks caused by moving parts inside each chamber itself (known as leakage). The FLB 048 Forged Brass Universal Check Valve is a resilient seated check valve that has been designed specifically for use in water and wastewater applications where corrosion resistance is essential, as well as in combination with other products such as ball valves, globe valves and butterfly valves. The valve is manufactured from forged brass which has been subjected to a special heat treatment process that ensures the valves are resistant to corrosion and wear over time. The valve consists of a body made from forged brass which provides excellent resistance to corrosion and wear over time, while also providing excellent flow characteristics at low pressure drops across the seal face area thanks to its large sealing surface area. The body has an internal diameter of 38mm and includes two pressure retaining springs on either side which ensure that the valve remains closed when pressurized until sufficient force is applied against them so as to overcome their resilience forces before opening up fully again once released pressure has been removed again from those same springs within this same.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch,20 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹919   ₹971

You save ₹52!

5.36% OFF

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Add to Cart Buy Now

Ships within 8 days

Leader 12.7 mm (1/2 Inch),15 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹683   ₹697

You save ₹14!

2.01% OFF

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch, 150 mm Cast Iron Reflux Valve CI 021

By Leader

₹29,499   ₹31,272

You save ₹1,773!

5.67% OFF

This is a CI 021 Cast Iron Reflux Valve IS: 5312 PN - 1.6 Bolted Cover B.T.P. - 2.4 MPa Hyd.S.T.P. - 1.6 MPa Hyd that is made from the best quality raw materials and is manufactured by our experts based on the international standards and industry norms using latest technology and sophisticated machinery with complete adherence to all safety measures and guidelines laid down by the government or industry bodies so that it can be used in various industries like oil refineries, petrochemicals, chemical plants etc without any problem because of its excellent quality in terms of strength, durability etc and also ensures long lasting performance without any maintenance cost so as to provide excellent value for money to our esteemed customers in various industries across the globe. This product has been tested and meets the standards outlined in IS:5312, which are accepted throughout the International community as an industry benchmark for quality assurance and consistency of product performance. This product is made with durable cast iron, which makes it durable enough to withstand high temperatures and pressures, while also being lightweight enough for easier installation and maintenance by operators or technicians who work on the system regularly or only occasionally need access to the valve itself (depending on how often you intend on using your unit).

Add to Cart Buy Now

Ships within 8 days

Leader 2-1/2 Inch,65 mm Cast Iron Dual Plate Check Valve CI 085B

By Leader

₹4,011   ₹4,376

You save ₹365!

8.34% OFF

The CI 085B is a dual plate check valve which is used to seal one way flow of liquids and gases in a pipeline system with high pressure and low pressure on both sides of the valve body. The CI 085B consists of two independent diaphragms that are designed to open simultaneously when switching between the two positions (open or closed). The spring loaded design ensures that the upper disc remains closed when there is no pressure difference between both sides of the valve body while allowing it to open when there is a pressure difference between both sides of the valve body (pressure relief). This check valve is ideal for use in the oil industry, as well as other industries where there are high pressures and temperatures to contend with. It is typically used on oil rigs or in refineries, but can be used in any application where there are high pressure systems involved. The disc is made of ductile iron and its seat is made from SS316 material, so it's strong enough to withstand even the most demanding conditions you might encounter in your work environment.
The CI 085B Cast Iron Dual Plate Check Valve is a high-quality, durable product that will last for years to come. The valve has been tested to ensure it is completely watertight and reliable. It can be used in both high-pressure and low-pressure situations.

Add to Cart Buy Now

Ships within 8 days

Leader 8 Inch,200 mm Cast Iron Dual Plate Check Valve CI 085

By Leader

₹16,519   ₹16,972

You save ₹453!

2.67% OFF

Leader CI 085 Cast Iron Dual Plate Check Valve with a minimum pressure difference of 10 bar working pressure and a maximum pressure difference of 16 bar working pressure. The valve is designed to meet API 594 standards and is suitable for use in petroleum refining, petrochemical processing, natural gas processing, chemical processing and similar applications where high quality flow control is required in the presence of high pressures and temperatures. It can be used in liquid service only when installed horizontally or vertically to prevent freezing in cold climates (below freezing). The valve can be used in steam service with an internal flange exposed to the atmosphere at all times or when mounted vertically with an external flange exposed to the atmosphere at all times. The CI 085 Cast Iron Dual Plate Check Valve provides protection against reverse flow of fluids or gases through piping systems or equipment by closing when there is an increase in pressure on one side of the valve compared to the other side (pressure differential). The CI 085 Cast Iron Dual Plate Check Valve can also be used for sealing off areas where gases or liquids are being conveyed through pipes or tubing systems to prevent backflow into those areas where they might cause damage or injury to personnel or equipment if allowed to enter into those areas by reversing flow direction during normal operation conditions while allowing normal flow directions during abnormal conditions such as emergencies when there may be sudden changes in pressure levels within those areas due to leaks occurring from damaged piping systems or equipment components causing high pressure.

Add to Cart Buy Now

Ships within 8 days

Leader 10 Inch,250 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹12,976  

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch,80 mm Cast Carbon Steel Wafer Type Check Valve CCS 032

By Leader

₹6,135   ₹6,664

You save ₹529!

7.94% OFF

Leader CCS-032 is a Wafer Type Check Valve with a cast steel body, with flanged ends and resilient seats. The valve range comes with either clear pressure rating or gas tight arrangement. The wafer type design makes the product compact in size, durable and easy to install. Leader CCS 032 cast steel wafer type check valve is designed for water or gas in industrial plants. The valve has a resilient seat with a pin. It can be used for both PN and B.T.P. flows, providing these conditions are not too fast or strong. When multiple valves are used together the flow restriction must be taken into account. This product comes with a durable SS seat and flap pin. The Wafer Type Check Valve is a one-piece integral cast body design, which resists wear and corrosion by virtue of its ability to withstand fluid flow in either direction. It has a surface mounted stainless steel flapper pin for positive seal retention. The sleeved piston ring is manufactured from resilient material and is self-aligning at all temperatures. This product is a Wafer Type Check Valve. Its main application is for preventing the reverse flow of fluid, which can be applicable for various industrial applications. It is manufactured by using high quality raw material with an aim to provide a genuine and long lasting service.

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch,150 mm Cast Carbon Steel Swing Check Valve CCS 040

By Leader

₹2,83,199   ₹3,02,284

You save ₹19,085!

6.31% OFF

The Leader CCS 040 is a swing check valve with a S.T.P. of 168.5 bar and B.T.P. of 231 bar, BS : 1868/API 6D Class - 900 Bolted Bonnet and cast carbon steel body with renewable seats made from 13% chromium steel. The Leader CCS 040 has been designed for use with gas, water or other liquids at high pressures up to 168.5 bar without fail with its excellent design, material properties and high quality of craftsmanship. Swing Check Valves are generally used as isolation valves, to isolate nitrogen from the pipeline. They are also suitable for use with hydrocarbons. The valves are available in two different materials - cast carbon steel and forged carbon steel. The check valve is designed to close against any pressure differential occurring in the system. All bonnets, seats and disc internals are manufactured from a single bladed section of AISI 316 Grade Stainless Steel which is universally regarded as the best material available for products. Leader Cast Steel Swing Check Valve is produced by Leader for the oil industry in accordance with API 6D, BS: 1868 and DIN 1986. The high strength castings are suitable for the higher pressure from thermal power stations and power plants. The valves are made from ductile iron materials with ASTM A536 Class F and G. They are designed to be used as unidirectional shut-off type service valves in petroleum and chemical plants, refineries and petrochemical industries.

Add to Cart Buy Now

Ships within 8 days

Leader 4 Inch,100 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹23,599   ₹25,781

You save ₹2,182!

8.46% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch,80 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹14,159   ₹14,264

You save ₹105!

0.74% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 2-1/2 Inch,65 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹8,731   ₹9,333

You save ₹602!

6.45% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 2 Inch,50 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹4,955   ₹5,413

You save ₹458!

8.46% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 1-1/2 Inch,40 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹3,067   ₹3,238

You save ₹171!

5.28% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 1-1/4 Inch,32 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹2,477   ₹2,601

You save ₹124!

4.77% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch,25 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹1,698  

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch,20 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹1,073   ₹1,131

You save ₹58!

5.13% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 12.7 mm (1/2 Inch),15 mm Bronze Horizontal Lift Check Valve IS 025

By Leader

₹837   ₹872

You save ₹35!

4.01% OFF

IS 025 Gun Metal Horizontal Lift Check Valve is made of IS 778 class gun metal, which is a uniform alloy material with high corrosion resistance and high strength properties. The valve body is made of IS 778 class gun metal, which has high strength, good heat treatment performance and excellent wear resistance, and the seat ring is made of Cu-alloy material with good corrosion resistance and excellent wear resistance, which can effectively prevent leakage caused by the valve seat wear or deformation caused by the sand blasting erosion; The entire unit body adopts an integral design, which greatly reduces the installation space and increases efficiency; The valve disc adopts a double-way structure with an isolating function between ports so that it can be used to isolate the oil supply system when it is not in use; The check valve has a built-in guide groove, so that it does not require additional accessories for installation. The IS 025 Gun Metal Horizontal Lift Check Valve is a Class 1 B.T.P. and 1.5 MPa Hyd. S.T.P. valve with integral seat Cu-alloy, which makes it ideal for applications that require high pressure, as well as those that are subject to extreme temperatures or pressures. The IS 025 Gun Metal Horizontal Lift Check Valve is a part of our extensive range of check valves available in various materials and configurations to suit your application needs. This valve is manufactured from gunmetal and has an integral seat made from copper alloy material for enhanced corrosion resistance. It has been designed for use in high pressure applications with a working pressure range between 1 bar (145 PSI) to 1.5 bar (210 PSI).

Add to Cart Buy Now

Ships within 8 days

Leader 4 Inch,100 mm Bronze Horizontal Lift Check Valve IS 024

By Leader

₹67,259   ₹72,765

You save ₹5,506!

7.57% OFF

The IS 024 Gun Metal Horizontal Lift Check Valve is a Class 2, 2-screwed cover with a screwed in cover, 2.4MPa B.T.P., 1.6MPa S.T.P., and integral seat Cu-alloy design. The IS 024 Gun Metal Horizontal Lift Check Valve is used for regulating the flow of liquids, gases, or steam through a pipeline system. It can be used as an isolation valve or as a portion of a larger control system. The IS 024 Gun Metal Horizontal Lift Check Valve has a working pressure of up to 2.4 MPa, which allows it to handle high-pressure fluids without damage to itself or the pipeline system in which it is installed. The valve also has an operating temperature range of -20°C to 80°C (-4°F to 176°F), making it suitable for use in a variety of applications across different global regions throughout the year without requiring any additional modifications prior to installation or use."
The IS 024 Gun Metal Horizontal Lift Check Valve is a Class 2, screwed-in cover, B.T.P. 2.4 MPa / S.T.P. 1.6 MPa hydrated seat check valve that is suitable for use in water and wastewater treatment plants, as well as industrial processes that require watertight seals. This vertical lift check valve has an integral seat made of copper alloy and has an operating pressure range of 150 psi to 2000 psi for both hot and cold water applications. This check valve features a gun metal body with anodized aluminum bonnet, which makes this product ideal for a wide range of applications in the chemical industry and other industries where corrosion resistance is important.

Add to Cart Buy Now

Previous Next

Page 1 of 14 results