• Home /
• All Brands /
• Leader /
• Plumbing /
• Industrial Valves /
• Gate and Sluice Valves

Have a question? Call us now at +91 9650660070

Leader Gate And Sluice Valves

Showing 40 out of 426 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 8 days

Leader 18 Inch, 450 mm Cast Iron Wheel Operated Sluice Valve CI 043

By Leader

₹3,77,599   ₹4,23,946

You save ₹46,347!

10.93% OFF

Forged cast iron sluice valve is the most suitable for water works where a high pressure and high flow rate are required. The forged cast iron sluice valve is manufactured by forging process, which makes it strong enough to resist high pressure and high flow rate. The forged cast iron sluice valves are available in 50 mm, 80 mm, 100 mm, 150 mm and 200 mm diameters with different kinds of seats. The seat can be made from composite or stainless steel according to customer's requirement. The forged cast iron sluice valves are also available with different types of seals such as hydrodynamic seat seal, renewable seat seal and solid wedge seat seal etc. The CI 043 cast iron sluice valve is manufactured by us on IS:14846 PN - 1.6 bolted bonnet inside screw non rising stem B.T.P. - 2.4 MPA Hyd. S.T.P - 1.6 MPA Hyd. Renewable Seat Cu-Alloy Seats, Stem SS Solid Wedge with the best quality material and superior finish standards to ensure maximum performance and durability in all weather conditions. This product is suitable for use with water only, but not for use with chemicals or other hazardous substances such as petroleum products or sewage effluent because it will corrode over time if exposed to such substances.

Add to Cart Buy Now

Ships within 8 days

Leader 8 Inch, 200 mm Cast Iron Wheel Operated Sluice Valve CI 008

By Leader

₹62,539   ₹69,570

You save ₹7,031!

10.11% OFF

The CI 008 Cast Iron Sluice Valve IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu - alloy Carbon Steel Solid Wedge is a component of the CI 008 Cast Iron J Sluice Valve 50 mm PN-1.0, which is used in the agricultural and industrial sectors to control the flow of water and other liquids through pipes and tubes for irrigation purposes (e.g., sprinklers). The valve has an inside screw bonnet, threaded connection for easy installation and maintenance, and a non-rising stem design that allows it to work with both rising and non-rising stems from 1/4" to 1/2". The CI 008 cast iron sluice valve is manufactured by an ISO 9001:2008 certified company to IS:14846 standard, which is a popular specification for fire fighting equipment and industrial sprinklers in India and abroad. The sluice valve is made of cast iron that ensures superior strength, durability and corrosion resistance even in harsh environments. It has a bolted bonnet inside screw with non-rising stem bonnet design, which makes it easy to handle and install. The CI 008 Cast Iron Sluice Valve is a IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd., Renewable Seat Cu - alloy Carbon Steel Solid Wedge, that is used in the construction of water pipelines in industries like chemical processing, petrochemical plants, oil refineries, etc., where large amounts of water need to be transferred from one place to another with minimal leakage or loss of pressure over long distances and at varying temperatures.

Add to Cart Buy Now

Ships within 8 days

Leader 2-1/2 Inch, 65 mm Gun Metal Wheel Operated Gate Valve GM 002

By Leader

₹12,966  

It is manufactured from materials that meet the highest quality standards and this ensures its durability and long life span which will allow you to use it for years to come without having to worry about maintenance or replacement costs. The product comes with a 3 year warranty from the manufacturer which gives you peace of mind knowing that your product has been tested thoroughly before being released for sale on the market so that you can enjoy using it for many years without having any problems occurring during use over time. The GM 002 Gun Metal Gate Valve BS 5154 PN - 16 Screwed in Bonnet Inside Screw, Non-Rising Stem B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a high-quality gate valve made to last for years to come with its gun metal finish and robust construction. This gate valve has an internal bonnet that can be screwed in or out on the inside of the valve, making it easy to service when necessary. The valve has a non-rising stem and is suitable for use with 24 bar (3,045 psi) hydraulic systems and 17.6 bar (250 psi) hydropneumatic systems, as well as being able to handle up to a PN 16 screw thread connection on the outside of the valve body. This versatile valve also features an integral seat made from solid wedge copper alloy material for superior durability and reliability over time—no matter what kind of pressure you're putting it through!

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

By Leader

₹47,199   ₹52,012

You save ₹4,813!

9.25% OFF

It is an excellent choice for use in a variety of industrial applications, including the oil, gas and petrochemical industries. This valve features a raised stem that allows for easier disassembly and inspection of all parts of the valve, including the bonnet and wedge seat components which are made from carbon steel and are backed up by a renewable seal made from copper alloy material which prevents corrosion due to high temperature applications while also providing durability against wear and tear associated with excessive usage over time! Its rising stem face-to-face distance is 2.4 meters while its rising stem face-to-face distance is 0 meters respectively according to IS: 14846 code specifications (which means it can handle high pressure levels without leaking). The CI 058 Cast Iron Gate Valve Straight Pattern IS:14846 PN 1.6 Bolted Bonnet, O/S & Yoke Type, Rising Stem Face to Face Dist B.T.P. - 2.4 MPa Hyd S.T.P. - 1.6 MPa Hyd is used for medium temperature applications in the oil and gas industry as well as other industries where there are high temperatures involved such as boilers, furnaces and boilers This gate valve has a rising stem design with a face-to-face distance of 2mm which makes it ideal for use with high pressure applications such as oil wells and refineries It also has an adjustable seat and bonnet design which allows you to adjust or repair your gate valve without having to replace it entirely if something goes wrong.

Add to Cart Buy Now

Related Searches

leader gun metal gate and sluice valves

gun metal gate and sluice valves

leader gate and sluice valves

leader gate and sluice valves cast iron

leader gate and sluice valves gun metal

Ships within 8 days

Leader 6 Inch, 150 mm Gun Metal Wheel Operated Gate Valve GM 003

By Leader

₹1,53,399   ₹1,63,275

You save ₹9,876!

6.05% OFF

It features a gun metal body with an internal threaded bonnet and external screw threading on the stem which provides excellent strength against torque and pressure while also reducing leakage at the seal area. It also features a non-rising stem design with integral seat which makes it easier to install in tight spaces or when space is limited due to other components being installed on top of the valve body. The gate valve has a cast steel body with integral seat made from a solid wedge which allows for easy installation without having to worry about damage occurring during installation or removal. It has an inside thread with a non-rising stem for use with BSP or NPT threads and has a bore size of 20mm, making it suitable for use as a gate valve on small bore pipework and irrigation systems such as pressure boosting pumps or drip irrigation systems which require a higher flow rate than traditional ball valves can offer while still maintaining tight shut offs when required by using smaller diameter piping than would otherwise be necessary using conventional ball valves which tend to have larger pipe sizes due to the need for more material around the ball itself in order to prevent damage if it gets stuck open during normal operation. The GM 003 Gun Metal Gate Valve BS 5154 PN - 20 Screwed in Bonnet, Inside Screw, Non-Rising Stem B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a gate valve that features a gun metal finish, a screwed in bonnet, an inside screw, and non-rising stems. It is manufactured by Gunmetal Gate Valves Limited and has a maximum working pressure of 30 bar with a minimum rising stem pressure of 22 bar at 100% travel.

Add to Cart Buy Now

Ships within 8 days

Leader 2-1/2 Inch, 65 mm Cast Iron Wheel Operated Gate Valve CI 004

By Leader

₹8,849   ₹9,404

You save ₹555!

5.9% OFF

It is a high quality valve made from carbon steel solid wedge, which makes it resistant to corrosion and abrasion after long term use in harsh conditions. This product has been designed with a low profile design to reduce the amount of space it takes up when installed, making it ideal for use in small spaces like bathrooms or kitchens where space can be limited. This valve comes with an adjustable bonnet which allows you to adjust the opening size according to your needs so that you can control how much water flows through your system at any given time depending on what kind of work you are doing at home (such as washing dishes or taking a shower). CI 004 Cast Iron All Iron Gate Valve Class-125 Bolted Bonnet, Inside Screw, Non-Rising Stem B.T.P. -20.7 Bar Hyd. S.T.P. - 15.18 Bar Hyd is a part of our CI series of cast iron valves that can be used for process applications in a wide variety of settings where corrosion resistance and durability are important factors in the choice of materials used for their construction and assembly processes used during their manufacturing process which includes the following types: ball valves, butterfly valves, gate valves or globe valves depending on your requirements at an affordable price without sacrificing quality at all costs possible due to our strict quality control measures taken into account during each stage of production from raw material selection through final packaging before shipping it out to any customer worldwide interested in purchasing these products from us directly online as well

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 004

By Leader

₹5,191   ₹5,422

You save ₹231!

4.26% OFF

Leader IS 004 Gun Metal F Gate Valve 20 mm Class - 1 The valve has an inside screw, which means that it is screwed into place rather than welded. It also has a non rising stem integral seat, which means that the seat does not have to be turned when installing the valve. This type of seat requires more work during installation, but it also provides better sealing. The valve has an integral seat solid wedge cu - alloy, which is made from copper alloy and provides better sealing than other materials. The Gate Valve meaning that it can be used in piping systems carrying water or other liquids. It is rated at 1.5 MPa (hydraulic) and 1 MPa (strictly hydrodynamic). This allows it to handle high pressures without risking damage to itself or the piping system in which it's installed. It is a gate valve that features a 0.1 MPa hyd. Integral Seat Solid Wedge Cu - alloy and a 1.0 MPa hyd. S.T.P., as well as a screwed in bonnet, inside screw and false piece. The gate valve is used for water supply and wastewater drainage, as well as fire protection systems. The gate valve is used for water supply and wastewater drainage, as well as fire protection systems.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 003

By Leader

₹3,067   ₹3,341

You save ₹274!

8.2% OFF

Leader IS 003 Gun Metal F Gate Valve 20 mm Class - 1 is a quality product that is offered at a competitive price. It has all the features that you need to have in a gate valve and more! This product is made of high-quality material and will last for many years to come. This product comes with an integral seat that is solid wedge cupronickel (Cu-alloy). The rising stem bonnet screwing with pipe threads and cast iron swivel nuts are provided in this product as well. The bonnet is made out of cast iron and has Yoke type connection with the bonnet nut provided on it as well for easy installation purposes for any user or installer who uses this product regularly throughout their day-to-day lives when working on different types of projects such as construction sites or any other type of work environment where they need something like this installed so that they can use it easily without having any problems whatsoever when installing it. This class-1 gate valve is made from gun metal and has a rising stem. It is designed for use with oil and water, and can be used in temperatures ranging from -20 to 250 degrees Celsius. The valve is 15 mm wide, and it has an integral seat that is made of solid copper-alloy. This valve comes with an O/S & Yoke type bonnet, which means that it has a screw-on bonnet with a socket and yoke connection.

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch, 25 mm Gun Metal Wheel Operated Gate Valve IS 002

By Leader

₹3,303   ₹3,572

You save ₹269!

7.53% OFF

Leader IS 002 Gun Metal G Gate Valve 25 mm Class - 1 is a high-quality, reliable product that will help you get the job done. This product has been tested and approved by our team of experts, who have found that it is very efficient at its job. It has a unique design that will be sure to impress everyone who uses it. It is made using only top-quality materials, so you know that it will last for years to come without breaking down or falling apart. This product will give you all of the benefits you need to complete your task quickly and efficiently. It is designed for professionals who want a product that will last for years without breaking down or falling apart. This product was built with high-quality materials that make it durable enough to withstand even the most rigorous use over time without succumbing to wear or tear like other products might do when used regularly by professionals who need them every day for their jobs. This product can be used to protect the environment, as it is an environmentally friendly product. It is easy to install and maintain. This product comes in gun metal and features an integral seat solid wedge cu-alloy construction that helps to protect your system from corrosion and wear over time. This is a great option for any system!

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 001

By Leader

₹1,869  

Leader IS 001 Gun Metal F Gate Valve 20 mm Class - 1 is made from gun metal and has an integral seat in the solid wedge design which means it can be used in both high pressure and low pressure systems. The valve has an inside screw which means that it can be used on a wide range of different pipe sizes and is suitable for use with both hot and cold water systems as well as refrigeration systems and other gases such as air or steam which require temperature control via pressure control valves in order to prevent damage to pipes or other equipment when temperatures become too high or too low inside them due to changes in external conditions like weather conditions outside where they're located (such as wind chill factor while camping outdoors during winter months). The IS 001 Gun Metal Gate Valve is a Class - 1 screw in bonnet, inside screw, non-rising stem B.T.P. - 1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Integral Seat Solid Wedge Cu - alloy valve made by IS:778 International Standards Organization standards for products that are designed to be used in industrial applications with low pressure (under 7 bar) and medium pressure (up to 10 bar). It has a working pressure range of 0 psi (0 bar) to 1450 psi (100 bar), with a flow rate of 11 liters per minute at 10 psi, which makes it suitable for use in many different industries including pharmaceuticals, food processing, and oil & gas production.

Add to Cart Buy Now

Ships within 8 days

Leader 10 mm(3/8 Inch) Gun Metal Wheel Operated Gate Valve, IS 001

By Leader

₹1,155   ₹1,211

You save ₹56!

4.62% OFF

Leader IS 001 Gun Metal C Gate Valve 10 mm Class - 1 is made from gun metal and has an integral seat in the solid wedge design which means it can be used in both high pressure and low pressure systems. The valve has an inside screw which means that it can be used on a wide range of different pipe sizes and is suitable for use with both hot and cold water systems as well as refrigeration systems and other gases such as air or steam which require temperature control via pressure control valves in order to prevent damage to pipes or other equipment when temperatures become too high or too low inside them due to changes in external conditions like weather conditions outside where they're located (such as wind chill factor while camping outdoors during winter months). The IS 001 Gun Metal Gate Valve is a Class - 1 screw in bonnet, inside screw, non-rising stem B.T.P. - 1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Integral Seat Solid Wedge Cu - alloy valve made by IS:778 International Standards Organization standards for products that are designed to be used in industrial applications with low pressure (under 7 bar) and medium pressure (up to 10 bar). It has a working pressure range of 0 psi (0 bar) to 1450 psi (100 bar), with a flow rate of 11 liters per minute at 10 psi, which makes it suitable for use in many different industries including pharmaceuticals, food processing, and oil & gas production.

Add to Cart Buy Now

Ships within 8 days

Leader 12.7 mm (1/2 Inch), 15 mm Bronze Wheel Operated Gate Valve GM 0290

By Leader

₹2,005   ₹2,170

You save ₹165!

7.6% OFF

The GM 0290 Bronze Gate Valve BS : 5154 Class - 150 Union Bonnet, Inside Screw, Rising Stem B.T.P. - 450 PSIG Hyd. S.T.P. - 330 PSIG Hyd. Cu-alloy Solid Wedge is a bronze gate valve made from C3N4 bronze alloyed with tin and lead to give it the necessary strength and wear resistance for use in high pressure applications. It is designed to be used in piping systems that operate at pressures between 450 and 330 psi, although it can be used at other pressures if they are within the operating limits of the valve itself. The GM 0290 Bronze Gate Valve BS : 5154 Class - 150 Union Bonnet, Inside Screw, Rising Stem B.T.P. - 450 PSIG Hyd. S.T.P. - 330 PSIG Hyd has a rising stem design which means that it must be operated from the inside of the vessel or piping system where it is installed – this makes it unsuitable for use with external actuators such as electric motors or hydraulic cylinders because these have no way of accessing the interior where they would need to attach in order for them to operate correctly. The series was designed to meet the needs of domestic and international users in a variety of industries including chemical and petrochemical, power generation, food processing, pulp and papermaking, marine transportation, refining and oil & gas production. The series is designed to provide reliable service at high pressures and temperatures while being corrosion resistant in many corrosive environments. It features an all-metal construction with a solid wedge design and is designed for use in low pressure applications such as water supply pipes, water distribution systems, air-conditioning systems and refrigeration systems.

Add to Cart Buy Now

Ships within 8 days

Leader 2 Inch, 50 mm Gun Metal Wheel Operated Gate Valve GM 003

By Leader

₹8,967   ₹9,744

You save ₹777!

7.97% OFF

It features a gun metal body with an internal threaded bonnet and external screw threading on the stem which provides excellent strength against torque and pressure while also reducing leakage at the seal area. It also features a non-rising stem design with integral seat which makes it easier to install in tight spaces or when space is limited due to other components being installed on top of the valve body. The gate valve has a cast steel body with integral seat made from a solid wedge which allows for easy installation without having to worry about damage occurring during installation or removal. It has an inside thread with a non-rising stem for use with BSP or NPT threads and has a bore size of 20mm, making it suitable for use as a gate valve on small bore pipework and irrigation systems such as pressure boosting pumps or drip irrigation systems which require a higher flow rate than traditional ball valves can offer while still maintaining tight shut offs when required by using smaller diameter piping than would otherwise be necessary using conventional ball valves which tend to have larger pipe sizes due to the need for more material around the ball itself in order to prevent damage if it gets stuck open during normal operation. The GM 003 Gun Metal Gate Valve BS 5154 PN - 20 Screwed in Bonnet, Inside Screw, Non-Rising Stem B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a gate valve that features a gun metal finish, a screwed in bonnet, an inside screw, and non-rising stems. It is manufactured by Gunmetal Gate Valves Limited and has a maximum working pressure of 30 bar with a minimum rising stem pressure of 22 bar at 100% travel.

Add to Cart Buy Now

Ships within 8 days

Leader 12 Inch, 300 mm Cast Iron Wheel Operated Gate Valve CI 010

By Leader

₹1,41,599   ₹1,42,478

You save ₹879!

0.62% OFF

The CI 010 Cast Iron Gate Valve PN-1.0 Bolted Bonnet, O/S Yoke Type, Rising Stem, Face to Face Dim. B.T.P. -1.5 MPa Hyd.S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu-Alloy Seats, Stem SS Carbon Steel Solid Wedge is a cast iron valve that can be used for various applications in the oil and gas industry, including the transportation of water, fuel oils and gases as well as heating oils and other fluids with low viscosity (NON-CORROSIVE) with pressures up to 10 bar and temperatures up to 150 degrees Celsius. The cast iron body is made from high quality materials and is resistant to corrosion and wear caused by corrosion products such as acids or salt concentrations on the surface of the metal parts that come into contact with fluid under pressure inside the pipe system (CORROSIVE). The bonnet has four bolt holes for attachment to flanges or other piping systems using bolts with flat heads or hexagonal heads depending on design specifications (BOLTED BONNET). The CI 010 cast iron gate valve PN-1.0 is a rising stem gate valve with bolted bonnet, face to face dimension B.T.P. - 1.5 MPa, S.T.P. - 1.0 MPa hyd. Renewable seat cu-alloy seats with solid wedge stem SS carbon steel rising stem and O/S yoke type body casting, available in ANSI 150, 300 and 600 flange ratings for NPT/BSP/ISO threads with 150# and 300# pressure class ratings for use in water and steam applications where high pressure steam is present.

Add to Cart Buy Now

Ships within 8 days

Leader 2 Inch, 50 mm Cast Iron Wheel Operated Gate Valve CI 004

By Leader

₹6,607   ₹7,062

You save ₹455!

6.44% OFF

It is a high quality valve made from carbon steel solid wedge, which makes it resistant to corrosion and abrasion after long term use in harsh conditions. This product has been designed with a low profile design to reduce the amount of space it takes up when installed, making it ideal for use in small spaces like bathrooms or kitchens where space can be limited. This valve comes with an adjustable bonnet which allows you to adjust the opening size according to your needs so that you can control how much water flows through your system at any given time depending on what kind of work you are doing at home (such as washing dishes or taking a shower). CI 004 Cast Iron All Iron Gate Valve Class-125 Bolted Bonnet, Inside Screw, Non-Rising Stem B.T.P. -20.7 Bar Hyd. S.T.P. - 15.18 Bar Hyd is a part of our CI series of cast iron valves that can be used for process applications in a wide variety of settings where corrosion resistance and durability are important factors in the choice of materials used for their construction and assembly processes used during their manufacturing process which includes the following types: ball valves, butterfly valves, gate valves or globe valves depending on your requirements at an affordable price without sacrificing quality at all costs possible due to our strict quality control measures taken into account during each stage of production from raw material selection through final packaging before shipping it out to any customer worldwide interested in purchasing these products from us directly online as well

Add to Cart Buy Now

Ships within 8 days

Leader 4 Inch, 100 mm Cast Iron Wheel Operated Sluice Valve CI 008

By Leader

₹22,419   ₹23,668

You save ₹1,249!

5.28% OFF

The CI 008 Cast Iron Sluice Valve IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu - alloy Carbon Steel Solid Wedge is a component of the CI 008 Cast Iron J Sluice Valve 50 mm PN-1.0, which is used in the agricultural and industrial sectors to control the flow of water and other liquids through pipes and tubes for irrigation purposes (e.g., sprinklers). The valve has an inside screw bonnet, threaded connection for easy installation and maintenance, and a non-rising stem design that allows it to work with both rising and non-rising stems from 1/4" to 1/2". The CI 008 cast iron sluice valve is manufactured by an ISO 9001:2008 certified company to IS:14846 standard, which is a popular specification for fire fighting equipment and industrial sprinklers in India and abroad. The sluice valve is made of cast iron that ensures superior strength, durability and corrosion resistance even in harsh environments. It has a bolted bonnet inside screw with non-rising stem bonnet design, which makes it easy to handle and install. The CI 008 Cast Iron Sluice Valve is a IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd., Renewable Seat Cu - alloy Carbon Steel Solid Wedge, that is used in the construction of water pipelines in industries like chemical processing, petrochemical plants, oil refineries, etc., where large amounts of water need to be transferred from one place to another with minimal leakage or loss of pressure over long distances and at varying temperatures.

Add to Cart Buy Now

Ships within 8 days

Leader 2-1/2 Inch, 65 mm Cast Iron Wheel Operated Sluice Valve CI 008

By Leader

₹15,339   ₹16,190

You save ₹851!

5.26% OFF

The CI 008 Cast Iron Sluice Valve IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu - alloy Carbon Steel Solid Wedge is a component of the CI 008 Cast Iron J Sluice Valve 50 mm PN-1.0, which is used in the agricultural and industrial sectors to control the flow of water and other liquids through pipes and tubes for irrigation purposes (e.g., sprinklers). The valve has an inside screw bonnet, threaded connection for easy installation and maintenance, and a non-rising stem design that allows it to work with both rising and non-rising stems from 1/4" to 1/2". The CI 008 cast iron sluice valve is manufactured by an ISO 9001:2008 certified company to IS:14846 standard, which is a popular specification for fire fighting equipment and industrial sprinklers in India and abroad. The sluice valve is made of cast iron that ensures superior strength, durability and corrosion resistance even in harsh environments. It has a bolted bonnet inside screw with non-rising stem bonnet design, which makes it easy to handle and install. The CI 008 Cast Iron Sluice Valve is a IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd., Renewable Seat Cu - alloy Carbon Steel Solid Wedge, that is used in the construction of water pipelines in industries like chemical processing, petrochemical plants, oil refineries, etc., where large amounts of water need to be transferred from one place to another with minimal leakage or loss of pressure over long distances and at varying temperatures.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch, 20 mm Forged Cast Steel Wheel Operated Gate Valve FCS 002

By Leader

₹3,303   ₹3,326

You save ₹23!

0.69% OFF

The FCS 002 Forged Cast Steel Gate Valve BS:EN ISO 15761/ API 602 Class - 800 Bolted Bonnet, O/S & Yoke Type, Rising Stem B.T.P.-207 Bar Hyd.S.T.P.-152 Bar Hyd.6.9 Bar AIR Renewable SS Solid Wedge Alloy Steel Spiral Wound SS 304 with Graphoil Filler is a forged cast steel gate valve that has a bonnet, outlet and yoke type rising stem design. It is suitable for both water and air applications and can be used in high temperature applications up to 105°C or 221°F. It has a working pressure of 1,403 kN/m2 (150 bar). The body of this gate valve is made from forged cast steel with an alloyed graphite coating that reduces friction and wear resistance over time compared to unlubricated surfaces which can cause corrosion issues over time due to friction between moving parts when exposed to water (which acts as a lubricant). The body also features an outer shield that protects it against abrasion caused by debris or other foreign objects entering the valve during operation; this helps prevent premature wear on internal components due to friction. FCS 002 Forged Cast Steel Gate Valve is a Forged Cast Steel D Gate Valve BS:EN ISO 15761/ API 602 Class - 800 Bolted Bonnet, O/S & Yoke Type, Rising Stem B.T.P.-207 Bar Hyd.S.T.P.-152 Bar Hyd.6.9 Bar AIR Renewable SS Solid Wedge Alloy Steel Spiral Wound SS 304 with Graphoil Filler. The valve is manufactured by using high quality raw materials that make it durable and reliable in its performance. It has excellent flow capacity which helps to reduce the pressure drop across it and thus improves the efficiency of the system where it is installed.

Add to Cart Buy Now

Ships within 8 days

Leader 6 inch, 150 mm Ductile Iron Suice Valve, DI 043

By Leader

₹36,579   ₹39,520

You save ₹2,941!

7.44% OFF

The Leader 6 inch, 150 mm (DI 043) Ductile Iron Sluice Valve stands as a robust and essential component in fluid control systems, engineered with precision and durability for a wide range of industrial applications. Crafted from high-quality ductile iron, this sluice valve is designed to regulate and control the flow of fluids with efficiency and reliability. Its construction from ductile iron not only imparts exceptional strength but also enhances corrosion resistance, making it well-suited for demanding environments in water supply systems, wastewater treatment plants, and industrial pipelines. The design of the Leader Ductile Iron Sluice Valve incorporates advanced features to provide precise control over the fluid flow. The sturdy construction of the valve ensures longevity, and its resistance to corrosion contributes to its ability to withstand the rigors of diverse industrial settings. The valve's rising stem design allows for easy visual indication of the valve position, facilitating monitoring and maintenance. Equipped with a resilient wedge and robust sealing components, the sluice valve is engineered to deliver leak-free performance, ensuring the integrity of the fluid system. Whether used for isolation or throttling, the Leader Ductile Iron Sluice Valve offers reliable and efficient fluid control, contributing to the overall safety and efficiency of water and industrial systems. In summary, the Leader Ductile Iron Sluice Valve exemplifies durability, precision engineering, and adaptability, making it a trusted solution for fluid control in various industrial applications. Its robust construction, corrosion resistance, and advanced features underline the Leader brand's commitment to providing high-performance valves that contribute to the reliability and efficiency of fluid systems.

Add to Cart Buy Now

Ships within 8 days

Leader 4 inch, 100 mm Ductile Iron Suice Valve, DI 043

By Leader

₹24,779   ₹27,166

You save ₹2,387!

8.79% OFF

The Leader 4 inch, 100 mm (DI 043) Ductile Iron Sluice Valve stands as a robust and essential component in fluid control systems, engineered with precision and durability for a wide range of industrial applications. Crafted from high-quality ductile iron, this sluice valve is designed to regulate and control the flow of fluids with efficiency and reliability. Its construction from ductile iron not only imparts exceptional strength but also enhances corrosion resistance, making it well-suited for demanding environments in water supply systems, wastewater treatment plants, and industrial pipelines. The design of the Leader Ductile Iron Sluice Valve incorporates advanced features to provide precise control over the fluid flow. The sturdy construction of the valve ensures longevity, and its resistance to corrosion contributes to its ability to withstand the rigors of diverse industrial settings. The valve's rising stem design allows for easy visual indication of the valve position, facilitating monitoring and maintenance. Equipped with a resilient wedge and robust sealing components, the sluice valve is engineered to deliver leak-free performance, ensuring the integrity of the fluid system. Whether used for isolation or throttling, the Leader Ductile Iron Sluice Valve offers reliable and efficient fluid control, contributing to the overall safety and efficiency of water and industrial systems. In summary, the Leader Ductile Iron Sluice Valve exemplifies durability, precision engineering, and adaptability, making it a trusted solution for fluid control in various industrial applications. Its robust construction, corrosion resistance, and advanced features underline the Leader brand's commitment to providing high-performance valves that contribute to the reliability and efficiency of fluid systems.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 010

By Leader

₹7,079   ₹7,754

You save ₹675!

8.71% OFF

Leader IS 010 Gun Metal F Gate Valve 20 mm Class - 2 is a gate valve that has a 1/2" BSP female connection and a maximum working pressure of 16 bar (2200 psi). It is made of gun metal, which is an alloy that contains copper and tin, as well as other metals such as lead or zinc. This particular material is highly resistant to corrosion because it forms an oxide film when exposed to air or water vapors; this oxide film protects the metal underneath from further damage by preventing further oxidation from occurring once formed on its surface during use within your system's plumbing network.* This product comes standard with a gun metal finish that matches most other components used in industrial settings today; however, if you would like something more specific for your application then we can offer custom finishes upon request! It has a gun metal finish, and it is rated for use with fluid pressures up to 2.4 MPa in industrial applications such as oil and gas production, refineries, petrochemical plants, chemical plants, food processing plants, pulp and paper mills, etc. It comes with a screwed bonnet design and an inside screw type stem B.T.P., which allows for easy installation and removal of parts during maintenance or repair work on the system where it's installed.

Add to Cart Buy Now

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 006

By Leader

₹6,961   ₹7,581

You save ₹620!

8.18% OFF

Leader IS 006 Gun Metal F Gate Valve 20 mm Class - 1 has been designed to meet the needs of modern irrigation systems and is a reliable solution for use in both new and existing installations. The valve features a rising stem design with an integral seat, which makes it suitable for either hydropneumatic or hydraulic applications where a solid wedge seat is required to prevent leakage from occurring between the disc and the body of the valve when fully opened or closed respectively. This valve is made from a gun metal alloy, making it extremely durable and reliable for use in harsh conditions. The rising stem design helps to prevent the valve from being opened while it is closed, and the integral seat design allows the valve to be opened more easily than with other designs that require additional parts such as seats and packing rings to hold them closed during installation or removal of the valve body itself (which can make them more difficult to fit). The product is made of high-quality raw material and advanced technology which makes it durable and reliable for using for a long time and it can be used for many years so that you don't need to buy another one soon because it will use for a long time.This valve is made from a gun metal alloy, making it extremely durable and reliable for use in harsh conditions. The rising stem design helps to prevent the valve from being opened while it is closed, and the integral seat design allows the valve to be opened more easily than with other designs that require additional parts such as seats and packing rings to hold them closed during installation or removal of the valve body itself.

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch, 80 mm Gun Metal Wheel Operated Gate Valve IS 002

By Leader

₹23,599   ₹24,871

You save ₹1,272!

5.11% OFF

Leader IS 002 Gun Metal L Gate Valve 80 mm Class - 1 is a high-quality, reliable product that will help you get the job done. This product has been tested and approved by our team of experts, who have found that it is very efficient at its job. It has a unique design that will be sure to impress everyone who uses it. It is made using only top-quality materials, so you know that it will last for years to come without breaking down or falling apart. This product will give you all of the benefits you need to complete your task quickly and efficiently. It is designed for professionals who want a product that will last for years without breaking down or falling apart. This product was built with high-quality materials that make it durable enough to withstand even the most rigorous use over time without succumbing to wear or tear like other products might do when used regularly by professionals who need them every day for their jobs. This product can be used to protect the environment, as it is an environmentally friendly product. It is easy to install and maintain. This product comes in gun metal and features an integral seat solid wedge cu-alloy construction that helps to protect your system from corrosion and wear over time. This is a great option for any system!

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch, 25 mm Brass Wheel Operated Gate Valve IS 026

By Leader

₹2,132  

Leader IS 026 Brass G Forged Gate Valve 25 mm is a heavy duty product that is perfect for industrial applications where high pressures and temperatures are present. This valve has a solid wedge design that prevents wear and tear from occurring over time, making it a sturdy choice for your application needs. The brass material also makes this valve durable enough to withstand harsh environments and conditions such as high temperatures, which means that you won't have to worry about replacing it anytime soon! This valve is made from IS:13114 standard pattern which means that you can use it in any kind of industry or environment without having to worry about compatibility issues or whether or not the product will meet all your needs! The IS 026 D 15 mm Brass Gate Valve is a standard pattern, B.T.P.-certified valve that can be used in a variety of industrial applications. The valve is made of brass, and has an integral seat. It comes with a solid wedge, which ensures that the valve will not leak when it is closed. The valve is designed to withstand high pressures and temperatures while also being able to resist corrosion caused by chemicals used in industrial processes. The valve has a threaded bonnet and comes with 2 MPA screws so you can install it easily. It also has an internal screw design that allows you to adjust the position of the stem after installing the bonnet or stem cap without having to remove any other parts from the assembly.

Add to Cart Buy Now

Ships within 8 days

Leader 12.7 mm (1/2 Inch), 15 mm Brass Wheel Operated Gate Valve IS 026

By Leader

₹990   ₹1,038

You save ₹48!

4.62% OFF

Leader IS 026 Brass D Forged Gate Valve 15 mm is a heavy duty product that is perfect for industrial applications where high pressures and temperatures are present. This valve has a solid wedge design that prevents wear and tear from occurring over time, making it a sturdy choice for your application needs. The brass material also makes this valve durable enough to withstand harsh environments and conditions such as high temperatures, which means that you won't have to worry about replacing it anytime soon! This valve is made from IS:13114 standard pattern which means that you can use it in any kind of industry or environment without having to worry about compatibility issues or whether or not the product will meet all your needs!
The IS 026 D 15 mm Brass Gate Valve is a standard pattern, B.T.P.-certified valve that can be used in a variety of industrial applications. The valve is made of brass, and has an integral seat. It comes with a solid wedge, which ensures that the valve will not leak when it is closed. The valve is designed to withstand high pressures and temperatures while also being able to resist corrosion caused by chemicals used in industrial processes. The valve has a threaded bonnet and comes with 2 MPA screws so you can install it easily. It also has an internal screw design that allows you to adjust the position of the stem after installing the bonnet or stem cap without having to remove any other parts from the assembly.

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch, 80 mm Bronze Wheel Operated Gate Valve GM 189

By Leader

₹25,959   ₹27,354

You save ₹1,395!

5.1% OFF

The Gate Valve GM 189 Bronze BS 5154 CL - 150 Screwed in Bonnet Inside Screw, Rising Stem B.T.P. - 450 PSIG Hyd. S.T.P. - 330 PSIG Hyd. Integral Seat Cu-alloy Solid Wedge is a valve designed to control flow of liquids and gases through a pipeline or vessel. This bronze gate valve has an inside thread for connection to piping systems and a rising stem for the lifting mechanism, which allows it to remain open when connected to a pipeline or vessel. This valve features a screw-in bonnet that can be removed for cleaning or replacement of damaged parts, a rising stem with a ball valve seal that prevents leakage when closed, and an integral seat made of copper alloy with a solid wedge-shaped seat that provides excellent wear resistance and corrosion protection over time. The gate valve is designed for use at pressures up to 450 psi (3 MPa). It has a rising stem and a bonnet that screws in. It has a hydraulic pressure rating of 450 pounds per square inch gauge (psig) and a steam pressure rating of 330 psig. The valve has a solid wedge seat that's made of copper alloy, which is designed to withstand corrosion in salt water environments. The GM Series Bronze Gate Valves are designed for use in fire sprinkler systems, domestic hot water systems and other low pressure applications such as underfloor heating systems or domestic water heating systems. The valves are manufactured from bronze alloy with an anticorrosive coating applied to the body and bonnet face to prevent corrosion and wear in service environments. The valve body is screwed onto a flanged bonnet which contains an integral seat made from a solid wedge of copper alloy which ensures that it provides a tight seal against leakage when closed off from the piping system by means of a screwed-fitted bonnet nut and washer assembly on top of the bonnet face where it meets up with the body flange surface at its lower end.

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch, 150 mm Gun Metal Wheel Operated Gate Valve GM 005

By Leader

₹2,35,999   ₹2,58,055

You save ₹22,056!

8.55% OFF

The GM 005 Gun Metal Gate Valve is a bonneted gate valve with inside screw and non-rising stem designed for use on water or steam systems up to 450 PSIG and 330 PSIG at 100% duty. It is available in sizes 1/2" through 2", with a maximum working pressure of 450 PSIG and 330 PSIG at 100% duty, respectively. The GM 005 Gun Metal Gate Valve has a body made from gun metal, bonnet made of bronze alloy, seats made from 316L stainless steel and wedges made from solid copper alloy that resist corrosion due to exposure to hot steam as well as cold water environments. The valve's body is threaded with a standard 150 thread that matches other valves in this line such as the GM 250 series gate valves, so it can be installed easily into existing piping systems without the need for special parts or tools. The gate valve is designed for use in the food industry and is used for controlling flow through systems such as piping and tubing lines that carry liquids or gases at high pressures when closed off to control flow or open to allow it to pass through them freely without any restrictions whatsoever (depending on what you need). The GM 005 Gun Metal Gate Valve features an integral seat made from CUNO-alloy material that prevents leakage while also reducing wear on other parts of your system over time because it won't wear down like other materials might do over time due to friction caused by friction during operation; this means less maintenance costs over time which makes this product more cost effective than others on the market right now!

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch, 80 mm Gun Metal Wheel Operated Gate Valve GM 005

By Leader

₹50,739   ₹56,341

You save ₹5,602!

9.94% OFF

The GM 005 Gun Metal Gate Valve is a bonneted gate valve with inside screw and non-rising stem designed for use on water or steam systems up to 450 PSIG and 330 PSIG at 100% duty. It is available in sizes 1/2" through 2", with a maximum working pressure of 450 PSIG and 330 PSIG at 100% duty, respectively. The GM 005 Gun Metal Gate Valve has a body made from gun metal, bonnet made of bronze alloy, seats made from 316L stainless steel and wedges made from solid copper alloy that resist corrosion due to exposure to hot steam as well as cold water environments. The valve's body is threaded with a standard 150 thread that matches other valves in this line such as the GM 250 series gate valves, so it can be installed easily into existing piping systems without the need for special parts or tools. The gate valve is designed for use in the food industry and is used for controlling flow through systems such as piping and tubing lines that carry liquids or gases at high pressures when closed off to control flow or open to allow it to pass through them freely without any restrictions whatsoever (depending on what you need). The GM 005 Gun Metal Gate Valve features an integral seat made from CUNO-alloy material that prevents leakage while also reducing wear on other parts of your system over time because it won't wear down like other materials might do over time due to friction caused by friction during operation; this means less maintenance costs over time which makes this product more cost effective than others on the market right now!

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch, 80 mm Gun Metal Wheel Operated Gate Valve GM 003

By Leader

₹27,139   ₹28,287

You save ₹1,148!

4.06% OFF

It features a gun metal body with an internal threaded bonnet and external screw threading on the stem which provides excellent strength against torque and pressure while also reducing leakage at the seal area. It also features a non-rising stem design with integral seat which makes it easier to install in tight spaces or when space is limited due to other components being installed on top of the valve body. The gate valve has a cast steel body with integral seat made from a solid wedge which allows for easy installation without having to worry about damage occurring during installation or removal. It has an inside thread with a non-rising stem for use with BSP or NPT threads and has a bore size of 20mm, making it suitable for use as a gate valve on small bore pipework and irrigation systems such as pressure boosting pumps or drip irrigation systems which require a higher flow rate than traditional ball valves can offer while still maintaining tight shut offs when required by using smaller diameter piping than would otherwise be necessary using conventional ball valves which tend to have larger pipe sizes due to the need for more material around the ball itself in order to prevent damage if it gets stuck open during normal operation. The GM 003 Gun Metal Gate Valve BS 5154 PN - 20 Screwed in Bonnet, Inside Screw, Non-Rising Stem B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a gate valve that features a gun metal finish, a screwed in bonnet, an inside screw, and non-rising stems. It is manufactured by Gunmetal Gate Valves Limited and has a maximum working pressure of 30 bar with a minimum rising stem pressure of 22 bar at 100% travel.

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch, 25 mm Gun Metal Wheel Operated Gate Valve GM 003

By Leader

₹3,303   ₹3,511

You save ₹208!

5.92% OFF

It features a gun metal body with an internal threaded bonnet and external screw threading on the stem which provides excellent strength against torque and pressure while also reducing leakage at the seal area. It also features a non-rising stem design with integral seat which makes it easier to install in tight spaces or when space is limited due to other components being installed on top of the valve body. The gate valve has a cast steel body with integral seat made from a solid wedge which allows for easy installation without having to worry about damage occurring during installation or removal. It has an inside thread with a non-rising stem for use with BSP or NPT threads and has a bore size of 20mm, making it suitable for use as a gate valve on small bore pipework and irrigation systems such as pressure boosting pumps or drip irrigation systems which require a higher flow rate than traditional ball valves can offer while still maintaining tight shut offs when required by using smaller diameter piping than would otherwise be necessary using conventional ball valves which tend to have larger pipe sizes due to the need for more material around the ball itself in order to prevent damage if it gets stuck open during normal operation. The GM 003 Gun Metal Gate Valve BS 5154 PN - 20 Screwed in Bonnet, Inside Screw, Non-Rising Stem B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a gate valve that features a gun metal finish, a screwed in bonnet, an inside screw, and non-rising stems. It is manufactured by Gunmetal Gate Valves Limited and has a maximum working pressure of 30 bar with a minimum rising stem pressure of 22 bar at 100% travel.

Add to Cart Buy Now

Ships within 8 days

Leader 3 Inch, 80 mm Gun Metal Wheel Operated Gate Valve GM 002

By Leader

₹16,519   ₹17,785

You save ₹1,266!

7.12% OFF

It is manufactured from materials that meet the highest quality standards and this ensures its durability and long life span which will allow you to use it for years to come without having to worry about maintenance or replacement costs. The product comes with a 3 year warranty from the manufacturer which gives you peace of mind knowing that your product has been tested thoroughly before being released for sale on the market so that you can enjoy using it for many years without having any problems occurring during use over time. The GM 002 Gun Metal Gate Valve BS 5154 PN - 16 Screwed in Bonnet Inside Screw, Non-Rising Stem B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a high-quality gate valve made to last for years to come with its gun metal finish and robust construction. This gate valve has an internal bonnet that can be screwed in or out on the inside of the valve, making it easy to service when necessary. The valve has a non-rising stem and is suitable for use with 24 bar (3,045 psi) hydraulic systems and 17.6 bar (250 psi) hydropneumatic systems, as well as being able to handle up to a PN 16 screw thread connection on the outside of the valve body. This versatile valve also features an integral seat made from solid wedge copper alloy material for superior durability and reliability over time—no matter what kind of pressure you're putting it through!

Add to Cart Buy Now

Ships within 8 days

Leader 8 Inch, 200 mm Gun Metal Wheel Operated Gate Valve GM 186

By Leader

₹2,12,399   ₹2,29,738

You save ₹17,339!

7.55% OFF

Leader GM 186 Gun Metal R Gate Valve 200 mm PN-10 is a gun metal gate valve that can be used in any application where there are high pressures or temperatures as well as industries such as food and beverage processing plants, paper mills, chemical plants or refineries because it has been designed to withstand both high pressures and temperatures while also being corrosion resistant which means that it will last longer than other options out there on the market today which means less money spent on replacing parts over time! It is a gun metal gate valve made of a high quality copper alloy that is resistant to corrosion and rusting. It has a solid wedge design which allows you to easily open and close the valve. This product has an internal screw connection, so you can install it without needing any external adapters or connectors. It is a double acting poppet valve and has been designed to operate in the oil and gas industry where high pressures are present. The valve is manufactured from EN24 steel, which provides the required strength for this application with the added benefit of being non magnetic. This gate valve has two ports and comes complete with two locking nuts as well as a steel bonnet, which screws into the body of the valve from inside to provide extra strength against torque loads. The stem rises through this bonnet with a nut on either side for assembly purposes (shown in pictures). The stem itself has a shallow cone shape at its end to aid in sealing against pressure differentials between upstream and downstream piping during operation; these cones also provide a convenient means by which to tighten them after assembly using standard tools such as screwdrivers or Allen keys (not supplied).

Add to Cart Buy Now

Ships within 8 days

Leader 1-1/2 Inch, 40 mm Gun Metal Wheel Operated Gate Valve GM 186

By Leader

₹14,159   ₹15,372

You save ₹1,213!

7.89% OFF

Leader GM 186 Gun Metal I Gate Valve 40 mm PN-10 is a gun metal gate valve that can be used in any application where there are high pressures or temperatures as well as industries such as food and beverage processing plants, paper mills, chemical plants or refineries because it has been designed to withstand both high pressures and temperatures while also being corrosion resistant which means that it will last longer than other options out there on the market today which means less money spent on replacing parts over time! It is a gun metal gate valve made of a high quality copper alloy that is resistant to corrosion and rusting. It has a solid wedge design which allows you to easily open and close the valve. This product has an internal screw connection, so you can install it without needing any external adapters or connectors. It is a double acting poppet valve and has been designed to operate in the oil and gas industry where high pressures are present. The valve is manufactured from EN24 steel, which provides the required strength for this application with the added benefit of being non magnetic. This gate valve has two ports and comes complete with two locking nuts as well as a steel bonnet, which screws into the body of the valve from inside to provide extra strength against torque loads. The stem rises through this bonnet with a nut on either side for assembly purposes (shown in pictures). The stem itself has a shallow cone shape at its end to aid in sealing against pressure differentials between upstream and downstream piping during operation; these cones also provide a convenient means by which to tighten them after assembly using standard tools such as screwdrivers or Allen keys (not supplied).

Add to Cart Buy Now

Ships within 8 days

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Sluice Valve CI 008

By Leader

₹30,679   ₹34,474

You save ₹3,795!

11.01% OFF

The CI 008 Cast Iron Sluice Valve IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu - alloy Carbon Steel Solid Wedge is a component of the CI 008 Cast Iron J Sluice Valve 50 mm PN-1.0, which is used in the agricultural and industrial sectors to control the flow of water and other liquids through pipes and tubes for irrigation purposes (e.g., sprinklers). The valve has an inside screw bonnet, threaded connection for easy installation and maintenance, and a non-rising stem design that allows it to work with both rising and non-rising stems from 1/4" to 1/2". The CI 008 cast iron sluice valve is manufactured by an ISO 9001:2008 certified company to IS:14846 standard, which is a popular specification for fire fighting equipment and industrial sprinklers in India and abroad. The sluice valve is made of cast iron that ensures superior strength, durability and corrosion resistance even in harsh environments. It has a bolted bonnet inside screw with non-rising stem bonnet design, which makes it easy to handle and install. The CI 008 Cast Iron Sluice Valve is a IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd., Renewable Seat Cu - alloy Carbon Steel Solid Wedge, that is used in the construction of water pipelines in industries like chemical processing, petrochemical plants, oil refineries, etc., where large amounts of water need to be transferred from one place to another with minimal leakage or loss of pressure over long distances and at varying temperatures.

Add to Cart Buy Now

Ships within 8 days

Leader 12 Inch, 300 mm Cast Carbon Steel Wheel Operated Gate Valve CCS 003

By Leader

₹6,64,751   ₹7,47,894

You save ₹83,143!

11.12% OFF

This product is designed and manufactured to meet all the relevant standards of quality in accordance with British Standard BS : 1414 / API : 600 Class - 600. This valve can be used for air, water or oil as its construction is of high quality carbon steel and is produced by top class artisans. In addition, this gate valve has been given a heavy-duty handle made of cast aluminium that gives it a robust structure and strength to withstand pressure up to 110 Bar / 1450 PSI (Hydraulic), 150 Bar / 2100 PSI (Pressure) and 6.9 Bar / 100 PSI (Air). Leader CCS 003 Cast Carbon Steel I Gate Valve 40 mm Class - 600 can be used as pressure controlling valves or as pilot operated valves. It is a self-lifting type, non-rising stem type gate valve which has skewed tailpiece plate for direct mounting on a flange. This valve is applicable for oily liquids, sludge and water based fluids that do not corrode cast iron. Gate Valve is a popular choice for use in high pressure and temperature water service. The cast carbon steel body and bonnet ensure long lasting strength and flexibility. It has a rising stem handle that is both visible or not depending on requirements, as well as being able to be used with either solid or flexible wedges.

Add to Cart Buy Now

Ships within 8 days

Leader 3 inch, 80 mm Ductile Iron Suice Valve, DI 043

By Leader

₹18,879   ₹19,126

You save ₹247!

1.29% OFF

The Leader 3 inch, 80 mm (DI 043) Ductile Iron Sluice Valve stands as a robust and essential component in fluid control systems, engineered with precision and durability for a wide range of industrial applications. Crafted from high-quality ductile iron, this sluice valve is designed to regulate and control the flow of fluids with efficiency and reliability. Its construction from ductile iron not only imparts exceptional strength but also enhances corrosion resistance, making it well-suited for demanding environments in water supply systems, wastewater treatment plants, and industrial pipelines. The design of the Leader Ductile Iron Sluice Valve incorporates advanced features to provide precise control over the fluid flow. The sturdy construction of the valve ensures longevity, and its resistance to corrosion contributes to its ability to withstand the rigors of diverse industrial settings. The valve's rising stem design allows for easy visual indication of the valve position, facilitating monitoring and maintenance. Equipped with a resilient wedge and robust sealing components, the sluice valve is engineered to deliver leak-free performance, ensuring the integrity of the fluid system. Whether used for isolation or throttling, the Leader Ductile Iron Sluice Valve offers reliable and efficient fluid control, contributing to the overall safety and efficiency of water and industrial systems. In summary, the Leader Ductile Iron Sluice Valve exemplifies durability, precision engineering, and adaptability, making it a trusted solution for fluid control in various industrial applications. Its robust construction, corrosion resistance, and advanced features underline the Leader brand's commitment to providing high-performance valves that contribute to the reliability and efficiency of fluid systems.

Add to Cart Buy Now

Ships within 8 days

Leader 4 inch, 100 mm Ductile Iron Gate Valve, DI 058

By Leader

₹27,139   ₹27,864

You save ₹725!

2.6% OFF

The Leader 4 inch, 100 mm (DI 058) Ductile Iron Gate Valve is a stalwart in fluid control systems, meticulously engineered to provide reliable and precise shut-off in various industrial applications. Crafted with precision from high-quality ductile iron, this gate valve combines exceptional strength with corrosion resistance. The ductile iron construction ensures the valve's durability and resilience, making it well-suited for applications in water distribution systems, wastewater treatment plants, and various industrial processes. The design of the Leader Ductile Iron Gate Valve features a sliding gate or wedge that can be lowered or raised to control the flow of fluids. This mechanism ensures a tight seal when closed, preventing leakage and offering efficient shut-off capabilities. The ductile iron material enhances the valve's ability to withstand harsh environmental conditions, making it a reliable choice for challenging industrial settings. Engineered to meet industry standards, the Leader Gate Valve offers a dependable solution for isolating and controlling the flow of fluids. Its adaptability allows for integration into diverse fluid systems, contributing to the overall efficiency and reliability of industrial processes. The valve's sturdy construction, ease of operation, and low maintenance requirements make it a practical and cost-effective choice for applications where precise fluid control is essential. In summary, the Leader Ductile Iron Gate Valve exemplifies durability, precision engineering, and adaptability, making it an indispensable component for efficient and reliable fluid shut-off in a wide range of industrial applications. This valve underscores the Leader brand's commitment to providing high-quality solutions that contribute to the safety, efficiency, and reliability of fluid systems.

Add to Cart Buy Now

Ships within 8 days

Leader 10 inch, 250 mm Ductile Iron Gate Valve, DI 058

By Leader

₹1,26,978  

The Leader 10 inch, 250 mm (DI 058) Ductile Iron Gate Valve is a stalwart in fluid control systems, meticulously engineered to provide reliable and precise shut-off in various industrial applications. Crafted with precision from high-quality ductile iron, this gate valve combines exceptional strength with corrosion resistance. The ductile iron construction ensures the valve's durability and resilience, making it well-suited for applications in water distribution systems, wastewater treatment plants, and various industrial processes. The design of the Leader Ductile Iron Gate Valve features a sliding gate or wedge that can be lowered or raised to control the flow of fluids. This mechanism ensures a tight seal when closed, preventing leakage and offering efficient shut-off capabilities. The ductile iron material enhances the valve's ability to withstand harsh environmental conditions, making it a reliable choice for challenging industrial settings. Engineered to meet industry standards, the Leader Gate Valve offers a dependable solution for isolating and controlling the flow of fluids. Its adaptability allows for integration into diverse fluid systems, contributing to the overall efficiency and reliability of industrial processes. The valve's sturdy construction, ease of operation, and low maintenance requirements make it a practical and cost-effective choice for applications where precise fluid control is essential. In summary, the Leader Ductile Iron Gate Valve exemplifies durability, precision engineering, and adaptability, making it an indispensable component for efficient and reliable fluid shut-off in a wide range of industrial applications. This valve underscores the Leader brand's commitment to providing high-quality solutions that contribute to the safety, efficiency, and reliability of fluid systems.

Add to Cart Buy Now

Ships within 8 days

Leader 8 inch, 200 mm Ductile Iron Gate Valve, DI 058

By Leader

₹60,179   ₹69,476

You save ₹9,297!

13.38% OFF

The Leader 8 inch, 200 mm (DI 058) Ductile Iron Gate Valve is a stalwart in fluid control systems, meticulously engineered to provide reliable and precise shut-off in various industrial applications. Crafted with precision from high-quality ductile iron, this gate valve combines exceptional strength with corrosion resistance. The ductile iron construction ensures the valve's durability and resilience, making it well-suited for applications in water distribution systems, wastewater treatment plants, and various industrial processes. The design of the Leader Ductile Iron Gate Valve features a sliding gate or wedge that can be lowered or raised to control the flow of fluids. This mechanism ensures a tight seal when closed, preventing leakage and offering efficient shut-off capabilities. The ductile iron material enhances the valve's ability to withstand harsh environmental conditions, making it a reliable choice for challenging industrial settings. Engineered to meet industry standards, the Leader Gate Valve offers a dependable solution for isolating and controlling the flow of fluids. Its adaptability allows for integration into diverse fluid systems, contributing to the overall efficiency and reliability of industrial processes. The valve's sturdy construction, ease of operation, and low maintenance requirements make it a practical and cost-effective choice for applications where precise fluid control is essential. In summary, the Leader Ductile Iron Gate Valve exemplifies durability, precision engineering, and adaptability, making it an indispensable component for efficient and reliable fluid shut-off in a wide range of industrial applications. This valve underscores the Leader brand's commitment to providing high-quality solutions that contribute to the safety, efficiency, and reliability of fluid systems.

Add to Cart Buy Now

Ships within 8 days

Leader 1 Inch, 25 mm Gun Metal Wheel Operated Gate Valve IS 011

By Leader

₹11,327   ₹12,100

You save ₹773!

6.39% OFF

Leader IS 011 Gun Metal G Gate Valve 25 mm Class - 2 is a gun metal gate valve with rising stem bonnet design that has been designed to provide a safe and secure method of controlling the flow of liquids and gases in a wide range of applications such as oil and gas field facilities, petrochemical plants, chemical plants, fertilizer plants, water treatment plants and other process industries where reliable gate valves are required to ensure a safe working environment for employees and equipment. The rising stem bonnet design allows for easy access to internal components for inspection or replacement without removing the bonnet or seal assembly from its mounting position on top of the bonnet plate which helps reduce downtime during maintenance activities while keeping operators safe from exposure to potentially dangerous chemicals within those environments. This valve is available in 15mm and 20mm sizes, with a rising stem or a fixed stem design, with bonnets that are either screwed on or welded on, and with an internal or external thread connection point. The gate valves are made from gun metal steel and have a solid wedge seat made of copper-alloy material. The body is made of stainless steel AISI 316L or AISI 304L material, depending on the application requirements for the valve's service life span and performance needs for usage conditions being set up properly around the valve installation location area where it will be used for servicing machinery applications for both residential or commercial use purposes as needed by customers who want to buy one today!

Add to Cart Buy Now

Previous Next

Page 1 of 11 results