• Home /
• All Brands /
• Panacea Technology /
• Hydraulics and Pneumatics /
• Hoses & Hose Fittings /
• Hydraulic Hose and Reel /
• Air Hose Coil

Have a question? Call us now at +91 9650660070

Panacea-Technology Air Hose Coil

Showing 40 out of 60 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 5 days

Panacea Technology PU Ester Tube 12 mm OD 9 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹8,141 - ₹8,259

You save ₹1,063!

11.4% OFF

Panacea Technology PU Ester Tube 12 mm OD 9 mm ID (Pack of 100 m Roll) is designed for pneumatic air-line applications where a 12 mm outer diameter and 9 mm inner diameter are specified. Made from PU ester material, this tubing provides a flexible route for compressed air between suitably matched components. Its dimensional profile offers a clear reference when selecting fittings and connectors for pneumatic assemblies. The 100 m roll supplies a continuous length that can be measured and cut according to individual routing requirements, making it suitable for installations with several connection points. The tube can be arranged around machinery and equipment where flexible air-line positioning is required.Panacea Technology PU Ester Tube 12 mm OD 9 mm ID (Pack of 100 m Roll) is suitable for use with compatible pneumatic valves, regulators, push-in fittings, air preparation units, and automation components. Its 9 mm internal diameter defines the available air passage, while the 12 mm outer diameter establishes the external tube dimension for connection selection. The PU ester construction makes it appropriate for flexible pneumatic routing in machinery, control systems, and workshop setups. Supplied as a 100 m roll, it can be divided into application-specific sections during installation. Classified under the Air Hose Coil category, this Panacea Technology product is intended for compressed-air routing systems.

Type of Product : PU Ester Tube

ID (mm) : 9 mm

Wall Thickness : 1.5 mm

OD (mm) : 12 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (16)

Ships within 5 days

Panacea Technology PU Ester Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹7,551 - ₹7,669

You save ₹945!

10.97% OFF

Panacea Technology PU Ester Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) is intended for pneumatic air-line arrangements that call for a 10 mm outer diameter and 6.5 mm inner diameter. Produced from PU ester material, this tube provides a flexible pathway for compressed air between compatible pneumatic components. Its defined dimensions make it easier to identify suitable connectors, fittings, and other accessories during installation. The 100 m roll format provides a continuous length that can be portioned into individual sections based on the routing layout. This makes the tubing suitable for structured installations where air lines need to pass between multiple equipment points while maintaining a consistent tube size throughout the circuit.Panacea Technology PU Ester Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) can be integrated with compatible valves, push-in fittings, regulators, air preparation units, and pneumatic automation components. The 6.5 mm internal diameter establishes the air passage, while the 10 mm outside diameter defines the external profile for connection compatibility. Its PU ester construction supports applications requiring flexible tube routing around machinery and control equipment. The supplied 100 m roll can be cut into required lengths for different pneumatic sections. Categorized as an Air Hose Coil, this Panacea Technology tube is suited to compressed-air routing in pneumatic systems.

Type of Product : PU Ester Tube

ID (mm) : 6.5 mm

Wall Thickness : 1.75 mm

OD (mm) : 10 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 25

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 10 mm OD 7 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹6,607 - ₹6,843

You save ₹709!

9.39% OFF

Panacea Technology PU Ester Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is developed for pneumatic air circuits where a 10 mm outside diameter and 7 mm inside diameter are required. The PU ester construction provides a flexible tubing format for directing compressed air between compatible components while allowing practical routing around equipment. Its clearly specified dimensions assist in selecting matching pneumatic fittings and connection accessories. Supplied as a 100 m roll, the tube can be measured and divided into lengths suited to individual sections of an installation. This format is useful for pneumatic layouts involving multiple connection points, equipment assemblies, and extended air-line routes.Panacea Technology PU Ester Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is compatible with suitably sized pneumatic connectors, valves, regulators, air preparation units, and automation components. The 7 mm internal diameter defines the available air passage, while the 10 mm outer diameter establishes the external tube profile for fitting selection. Its PU ester material makes it suitable for flexible routing within machinery, control systems, and workshop pneumatic setups. The 100 m roll provides tubing that can be cut according to specific installation sections without changing the tube specification. Classified under the Air Hose Coil category, this Panacea Technology product is intended for compressed-air line applications.

Type of Product : PU Ester Tube

ID (mm) : 7 mm

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 25

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 8 mm OD 5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,073 - ₹5,309

You save ₹473!

8.18% OFF

Panacea Technology PU Ester Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) is a pneumatic tubing choice suited to air-line arrangements requiring a defined 8 mm outer diameter and 5 mm inner diameter. Manufactured using PU ester material, it provides a flexible tube format for connecting compatible pneumatic equipment and routing air between components. The specified dimensions make it suitable for selecting matching fittings and connection accessories based on tube size. Supplied as a 100 m roll, it provides ample tubing length for preparing separate sections across pneumatic installations, while the continuous roll format supports planned routing with fewer interruptions between connection points.Panacea Technology PU Ester Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) can be incorporated into compatible pneumatic circuits involving fittings, valves, regulators, air preparation units, and automation components. Its 8 mm outside diameter provides a clearly defined external profile, while the 5 mm internal diameter establishes the available air passage within the tube. The 100 m roll can be measured and cut into application-specific lengths for machinery, control equipment, and workshop air systems. Listed under the Air Hose Coil category, this Panacea Technology tube combines specified dimensions with a practical roll configuration for compressed-air routing applications.

Type of Product : PU Ester Tube

ID (mm) : 5 mm

Wall Thickness : 1.5 mm

OD (mm) : 8 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹4,483 - ₹4,719

You save ₹355!

7% OFF

Panacea Technology PU Ester Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is designed for pneumatic installations that require a flexible tube with a specified 8 mm outer diameter and 5.5 mm inner diameter. Constructed from PU ester material, this tubing provides a suitable passage for compressed air within compatible pneumatic arrangements. Its dimensional profile allows it to be matched with appropriate fittings and connectors for air-line assembly. Supplied in a 100 m roll, the tubing can be divided into required lengths for different connection points, helping accommodate varied routing layouts across machinery and pneumatic equipment. The roll format also provides a convenient way to manage tubing requirements for installations involving multiple air-line sections.Panacea Technology PU Ester Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is suitable for compatible pneumatic fittings, valves, regulators, air preparation assemblies, and automation equipment. The 5.5 mm internal diameter establishes the tube's air passage, while the 8 mm external diameter provides the specified outside profile for connection selection. Its PU ester construction suits applications where tubing needs to be routed between components within a pneumatic system. With 100 m supplied in a single roll, it can be cut to suit individual installation points in machinery, control systems, and workshop air circuits. This product falls under the Air Hose Coil category from Panacea Technology.

Type of Product : PU Ester Tube

ID (mm) : 5.5 mm

Wall Thickness : 1.25 mm

OD (mm) : 8 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 20

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 8 mm OD 6 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,185 - ₹3,657

You save ₹473!

11.45% OFF

Panacea Technology PU Ester Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution designed for air-line setups requiring an 8 mm outer diameter and 6 mm inner diameter. Made from PU ester material, it provides a defined internal route for compressed air while offering a flexible format for positioning around compatible pneumatic equipment. The specified tube dimensions support accurate selection of connectors and fittings during system assembly. Supplied in a 100 m roll, it provides a continuous length that can be measured and cut for individual sections, making it suitable for installations involving multiple connection points and varied routing requirements.Panacea Technology PU Ester Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) can be used with suitably matched pneumatic fittings, valves, regulators, air preparation units, and automation components. Its 6 mm internal diameter establishes the available passage for air, while the 8 mm outside diameter defines the external size for compatible connection hardware. The PU ester construction makes the tubing suitable for flexible air-line routing across machinery, control equipment, and workshop pneumatic circuits. The 100 m roll format allows users to prepare tube lengths according to the layout of the installation. Listed under the Air Hose Coil category, this Panacea Technology product is specified for compressed-air routing applications.

Type of Product : PU Ester Tube

ID (mm) : 6 mm

Wall Thickness : 1 mm

OD (mm) : 8 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,595 - ₹2,831

You save ₹119!

4.03% OFF

Panacea Technology PU Ester Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) is intended for pneumatic air connections that require a balanced tube size for compact routing and component integration. With a 6 mm outer diameter and 4 mm inner diameter, this PU ester tubing provides a defined channel for compressed-air flow through compatible pneumatic assemblies. Its polyurethane construction supports flexible positioning around machinery, control panels, and connection points without requiring a rigid tube arrangement. Supplied in a 100 m roll, it offers a convenient continuous length for preparing multiple air-line sections according to installation layouts and required routing distances.Panacea Technology PU Ester Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be used with suitably sized pneumatic fittings, push-in connectors, valves, regulators, and air preparation components. The 6 mm OD specification provides a practical tubing profile for organized routing in automation equipment, pneumatic control systems, and workshop machinery. Its 4 mm ID defines the internal passage and helps in selecting compatible connection hardware based on dimensional requirements. The 100 m roll format allows users to cut individual sections as needed while keeping tubing lengths organized during installation. Classified under the Air Hose Coil category, this Panacea Technology tube is designed for structured compressed-air line applications.

Type of Product : PU Ester Tube

ID (mm) : 4 mm

Wall Thickness : 1 mm

OD (mm) : 6 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 12

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,651 - ₹1,887

Panacea Technology PU Ester Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a compact pneumatic tubing option intended for air-line connections where a smaller tube profile is required. It features a 4 mm outer diameter and 2.5 mm inner diameter, providing a clearly defined passage for compressed air through compatible pneumatic components. Made from PU ester material, the tube offers a flexible format that can be routed through compact equipment arrangements and around connection points. The 100 m roll provides a continuous supply length that can be cut according to the dimensions required for individual pneumatic circuits, supporting organized installation across suitable machinery and control systems.Panacea Technology PU Ester Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be paired with compatible push-in fittings, valves, regulators, air preparation units, and other pneumatic components designed for its specified dimensions. Its narrow 4 mm outer profile makes it relevant for installations where tubing space needs to remain compact while maintaining a defined internal diameter. The roll format is practical for routing air lines between closely positioned components in automation equipment, instrumentation setups, and pneumatic assemblies. Listed under the Air Hose Coil category, this Panacea Technology tube provides specified dimensional characteristics for applications requiring compact pneumatic tubing.

Type of Product : PU Ester Tube

ID (mm) : 2.5 mm

Wall Thickness : 0.75 mm

OD (mm) : 4 mm

Working Temperature : -20 to + 70 °C

Radius : 10

Explore other Variants (15)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 8 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,657 - ₹3,657

You save ₹473!

11.45% OFF

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 8 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution configured for air circuits that need an 8 mm internal passage within a 10 mm external profile. It has a 10 mm outer diameter and 8 mm inner diameter, resulting in a 1 mm wall thickness for use with compatible pneumatic fittings and accessories. The 100 m roll provides a continuous supply that can be divided into required lengths for machinery, automation systems, control panels, and pneumatic equipment. Its polyamide PU construction offers a practical format for organized air-line installation and connection work where specific tube dimensions are essential.Panacea Technology Advanced Polyamide PU Tube 10 mm OD 8 mm ID (Pack of 100 m Roll) can be connected with compatible push-in fittings, valves, regulators, cylinders, actuators, and air preparation components. The 8 mm internal diameter defines the available passage for compatible compressed-air applications, while the 10 mm outside diameter helps establish fitting and support requirements. The extended roll length allows sections to be measured and cut for individual pneumatic routes, replacements, or circuit modifications. This Panacea Technology tube is suitable for industrial air systems requiring a defined bore, balanced tube profile, and convenient bulk-length supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 8 mm

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,421 - ₹3,539

You save ₹355!

9.12% OFF

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) is designed for pneumatic air circuits that require a mid-size tube profile with a clearly specified internal bore. It features an 8 mm outer diameter and 5 mm inner diameter, providing a 1.5 mm wall thickness for use with suitably matched pneumatic fittings. Supplied in a 100 m roll, it provides a continuous tubing length that can be cut into sections for equipment connections, air-line routing, and automation assemblies. The polyamide PU construction is suited to organized pneumatic installations where defined dimensions and convenient tube handling are important.Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) can be incorporated with compatible push-in connectors, valves, regulators, actuators, cylinders, and other pneumatic components. Its 5 mm internal diameter establishes the passage size for compatible compressed-air applications, while the 8 mm external dimension helps identify suitable fittings, clips, and supports. The 100 m roll format allows individual lengths to be prepared according to the requirements of different pneumatic layouts, servicing tasks, or circuit modifications. This Panacea Technology tube is suitable for industrial air systems requiring a defined tube size and extended roll length.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 5 mm

Wall Thickness : 1.5 mm

OD (mm) : 8 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,949 - ₹3,067

You save ₹237!

7.17% OFF

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is a pneumatic tubing option developed for air-line arrangements where a defined bore and outer profile are required. With an 8 mm outer diameter and 5.5 mm inner diameter, it provides a 1.25 mm wall thickness for use with appropriately sized pneumatic connections. The 100 m roll format provides substantial tubing length for preparing customized sections across automation equipment, machinery, control assemblies, and air circuits. Its polyamide PU construction makes it suitable for applications where consistent tube dimensions and practical routing are important.Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) can be paired with compatible fittings and pneumatic components such as connectors, regulators, valves, cylinders, and actuators. The 5.5 mm internal diameter defines the passage available for compatible compressed-air lines, while the 8 mm outside diameter helps in selecting matching connection and support hardware. The 100 m length can be measured and cut as required for individual installation points, replacement sections, or circuit extensions. This Panacea Technology tubing is suited to industrial pneumatic setups that call for a specific dimensional combination and convenient bulk-roll supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 5.5 mm

Wall Thickness : 1.25 mm

OD (mm) : 8 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 6 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,359 - ₹2,477

You save ₹119!

4.58% OFF

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) is configured for pneumatic air-routing requirements where a wider internal bore is needed within an 8 mm external profile. The tube measures 8 mm in outer diameter and 6 mm in inner diameter, giving a 1 mm wall thickness for use with suitably matched pneumatic fittings. Supplied as a 100 m roll, it provides extended tubing length that can be portioned according to individual connection points and installation routes. Its polyamide PU construction makes this tubing suitable for structured air-line arrangements across automation equipment, machinery, and pneumatic control systems.Panacea Technology Advanced Polyamide PU Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) offers a practical format for assembling and modifying pneumatic circuits with compatible components. The 6 mm internal passage helps define the required connection size for compressed-air lines, while the 8 mm outside diameter can be considered when selecting fittings, clamps, and tube supports. The 100 m roll allows users to prepare different lengths for equipment connections, replacement sections, or air-line extensions without changing the specified tube profile. This Panacea Technology product is suitable for industrial pneumatic applications requiring a clearly defined bore, compact external dimension, and long roll configuration.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 6 mm

Wall Thickness : 1 mm

OD (mm) : 8 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 10 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,663 - ₹5,899

You save ₹591!

9.11% OFF

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 10 mm ID (Pack of 100 m Roll) is designed for pneumatic air and fluid transfer applications where a flexible tube with defined dimensional accuracy is required. This tube features a 12 mm outer diameter and 10 mm inner diameter, providing a 2 mm wall thickness for suitable routing through pneumatic assemblies. Supplied as a 100 m roll, it offers a continuous length that can be cut according to installation requirements. The polyamide and PU construction combines the characteristics of both materials to support practical use in compact and organized pneumatic layouts.Panacea Technology Advanced Polyamide PU Tube 12 mm OD 10 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic fittings, connectors, valves, and air preparation components. Its coiled roll format helps simplify storage, handling, and length management during installation or maintenance work. The 10 mm internal diameter provides a defined passage for compressed air or compatible media, while the 12 mm external diameter helps determine fitting and routing compatibility. This Panacea Technology tube is suitable for industrial pneumatic setups requiring a measured tube size, extended roll length, and convenient cutting flexibility for individual connections.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 10 mm

Wall Thickness : 1 mm

OD (mm) : 12 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 3 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,359 - ₹2,477

You save ₹119!

4.58% OFF

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) is designed for pneumatic air connections where a compact yet clearly defined tube size is required. It features a 6 mm outer diameter and 3 mm inner diameter, providing a 1.5 mm wall thickness for use with compatible pneumatic fittings and connection components. The 100 m roll supplies a continuous length that can be portioned for individual air-line runs, equipment connections, and pneumatic circuit layouts. Its polyamide PU construction makes it suitable for automation equipment, control assemblies, and general industrial pneumatic arrangements where consistent tube dimensions are needed.Panacea Technology Advanced Polyamide PU Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) can be integrated with compatible push-in fittings, valves, regulators, actuators, and other pneumatic accessories. The 3 mm internal diameter establishes the passage size for compatible compressed-air applications, while the 6 mm external dimension helps identify suitable fittings, clips, and supports. Its 100 m roll configuration provides flexibility when preparing different tubing lengths for installation, servicing, or circuit modification. This Panacea Technology tube is suitable for pneumatic setups requiring a defined bore, manageable outer profile, and convenient bulk-length format.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 3 mm

Wall Thickness : 1.5 mm

OD (mm) : 6 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,663 - ₹5,899

You save ₹591!

9.11% OFF

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) is designed for pneumatic installations that require a 6.5 mm internal passage within a 10 mm outer profile. With a 10 mm outer diameter and 6.5 mm inner diameter, the tube has a 1.75 mm wall thickness for use with appropriately matched pneumatic fittings. The 100 m roll configuration provides ample tubing for creating dedicated air paths across automation equipment, machinery, control assemblies, and workshop pneumatic layouts. Its polyamide PU construction offers a practical tubing format for applications where dimensional accuracy and organized routing are important.Panacea Technology Advanced Polyamide PU Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) can be integrated into compatible pneumatic circuits using suitable connectors, valves, regulators, cylinders, and actuators. The 6.5 mm bore identifies the internal passage for compressed-air applications, while the 10 mm outside measurement helps determine matching connection and support hardware. The extended 100 m roll can be cut into required sections for new installations, equipment changes, or replacement work. As an Air Hose Coil, this Panacea Technology tube is suited to industrial air-routing requirements where a specific bore-to-outer-diameter combination and convenient roll length are needed.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 6.5mm

Wall Thickness : 1.75 mm

OD (mm) : 10 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,651 - ₹1,887

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) is intended for pneumatic systems that require a compact tube with a relatively larger internal passage. It measures 6 mm in outer diameter and 4 mm in inner diameter, providing a 1 mm wall thickness for connection with suitably matched pneumatic fittings. Supplied in a 100 m roll, it offers a long continuous length for preparing individual air-line sections across machinery, automation units, and control assemblies. The polyamide PU construction provides a practical tubing format for organized pneumatic installations where clearly defined dimensions are required.Panacea Technology Advanced Polyamide PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be used with compatible push-in connectors, valves, regulators, actuators, and other pneumatic components. The 4 mm internal diameter establishes the available passage for compatible compressed air, while the 6 mm external diameter helps determine suitable fittings and securing accessories. Its 100 m roll configuration allows tubing to be measured and cut according to different circuit layouts, connection points, or maintenance requirements. This Panacea Technology tube is suitable for pneumatic applications requiring a specific tube size, practical routing format, and extended roll length.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 4 mm

Wall Thickness : 1 mm

OD (mm) : 6 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,132 - ₹1,143

You save ₹155!

11.94% OFF

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) is a compact pneumatic tubing option designed for precise air-line connections and space-conscious routing. It features a 4 mm outer diameter and 2 mm inner diameter, providing a 1 mm wall thickness for use with suitably matched pneumatic fittings and components. Supplied in a 100 m roll, the tube offers an extended continuous length that can be measured and cut for individual connection points. Its polyamide PU construction is suited to pneumatic control arrangements, instrumentation lines, compact machinery, and automation assemblies where small-diameter tubing is required.Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) can be used with compatible push-in fittings, valves, regulators, actuators, and other pneumatic accessories. The narrow profile makes it appropriate for installations where tubing needs to be routed through confined spaces or around closely positioned components. Its 2 mm internal diameter establishes the available passage, while the 4 mm external dimension provides a reference for selecting compatible fittings and supports. The 100 m roll format also allows tubing sections to be prepared according to the layout of individual pneumatic circuits and equipment.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 2 mm

Wall Thickness : 1 mm

OD (mm) : 4 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 7 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹4,719 - ₹4,837

You save ₹473!

8.91% OFF

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is a pneumatic tubing choice with a 10 mm outer diameter and 7 mm inner diameter, providing a 1.5 mm wall thickness for compatible air-line connections. Its dimensional profile is suited to pneumatic layouts where the tube size needs to be matched precisely with fittings and connected components. Supplied in a 100 m roll, it provides a long continuous length that can be divided into sections for machine connections, automation equipment, control systems, and workshop air circuits. The polyamide PU construction gives the tubing a practical format for organized installation and routing.Panacea Technology Advanced Polyamide PU Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) can be used with suitably sized push-in fittings, valves, regulators, cylinders, actuators, and other pneumatic hardware. The 7 mm internal bore establishes the available passage for compatible compressed-air applications, while the 10 mm outside diameter assists in identifying matching connection accessories and tube supports. Its 100 m roll format is useful when multiple tube sections are required across a pneumatic setup, allowing lengths to be prepared according to individual routing requirements. This Air Hose Coil from Panacea Technology is suitable for industrial applications requiring defined tube dimensions and extended tubing supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 7 mm

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,025 - ₹1,049

You save ₹131!

11.1% OFF

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a compact tubing solution for pneumatic circuits that require a specific bore size within a slim external profile. It measures 4 mm in outer diameter and 2.5 mm in inner diameter, giving a 0.75 mm wall thickness for connection with appropriately sized pneumatic fittings. Supplied as a 100 m roll, it provides ample tubing length for multiple air-line sections, equipment connections, and routing requirements. The polyamide PU construction is suitable for organized pneumatic assemblies, automation equipment, and control systems where small-format tubing is required.Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be paired with compatible push-in fittings, miniature valves, regulators, actuators, and pneumatic connectors. Its 2.5 mm internal diameter defines the passage for compatible compressed-air applications, while the 4 mm outer diameter assists in identifying suitable connection hardware. The 100 m roll allows users to cut precise sections for different circuit layouts without requiring individually measured lengths. This Panacea Technology tube is suitable for compact pneumatic installations where dimensional accuracy, manageable tubing, and extended roll length are important considerations.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 2.5 mm

Wall Thickness : 0.75 mm

OD (mm) : 4 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology PU Ester Tube 14 mm OD 10 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹12,979 - ₹12,979

You save ₹1,299!

9.1% OFF

Panacea Technology PU Ester Tube 14 mm OD 10 mm ID (Pack of 100 m Roll) is a pneumatic tube with a 14 mm outside diameter and 10 mm inside diameter, giving a calculated wall thickness of 2 mm. The PU Ester material specification identifies its construction for compressed-air tubing applications, while the stated dimensions help in selecting appropriate connection components. This tube can be considered for pneumatic machinery, automated equipment, control systems, and air-line assemblies where a defined tube size is required. Supplied in a 100 m roll, it provides a continuous length that can be measured and cut according to individual routing, installation, and equipment requirements.Panacea Technology PU Ester Tube 14 mm OD 10 mm ID (Pack of 100 m Roll) can be matched with compatible pneumatic fittings, connectors, valves, regulators, cylinders, actuators, clamps, and other tube accessories. Its 10 mm internal diameter establishes the available air passage, while the 14 mm outer diameter serves as a dimensional reference for connection and support hardware. The roll format is suited to installations involving multiple tube sections, machine assembly, maintenance work, replacement runs, or pneumatic circuit changes. Listed under the Air Hose Coil category, this Panacea Technology PU Ester tube provides a defined material and dimensional option for pneumatic air routing.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 10 mm

Working Pressure : Vacuum to 12 Bar

Wall Thickness : 2 mm

OD (mm) : 14 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology PU Ester Tube 16 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹18,879 - ₹18,879

You save ₹1,771!

8.58% OFF

Panacea Technology PU Ester Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution designed for air transfer applications where a consistent tube profile and suitable dimensional fit are required. Featuring a 16 mm outer diameter and 11 mm inner diameter, this PU ester tube provides a defined passage for compressed air within compatible pneumatic arrangements. Supplied as a 100 m roll, it offers a practical length format for installation across different equipment layouts while helping reduce the need for frequent joints. The polyurethane construction is suitable for pneumatic setups that require flexible tubing for routing between components.Panacea Technology PU Ester Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic fittings, valves, air preparation units, and other compressed-air components where the specified tube dimensions are appropriate. Its roll format allows the tubing to be measured and cut according to installation requirements, making it useful for organized air-line routing in machinery, automation systems, and workshop pneumatic circuits. As an Air Hose Coil product from Panacea Technology, it combines clearly defined dimensional specifications with a convenient 100 m supply length for pneumatic applications.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 11 mm

Working Pressure : Vacuum to 12 Bar

Wall Thickness : 2.5 mm

OD (mm) : 16 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology PU Ester Tube 12 mm OD 8 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹10,383 - ₹10,619

You save ₹1,299!

10.9% OFF

Panacea Technology PU Ester Tube 12 mm OD 8 mm ID (Pack of 100 m Roll) is suited to pneumatic installations that require a 12 mm outer diameter and 8 mm inner diameter for compressed-air routing. Formed from PU ester material, the tubing offers a flexible profile for connecting compatible pneumatic components and arranging air lines around machinery. Its defined dimensional specifications help in identifying appropriate fittings, connectors, and related accessories for assembly. Supplied in a 100 m roll, it provides a continuous tubing length that can be measured and cut into sections according to the layout of the pneumatic system. This roll format is suitable for installations with multiple air-line connections and varied routing distances.Panacea Technology PU Ester Tube 12 mm OD 8 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic valves, regulators, push-in fittings, air preparation units, and automation equipment. The 8 mm internal diameter specifies the tube's air passage, while the 12 mm outer diameter establishes its external size for connection matching. Its PU ester construction supports flexible routing between components in machinery, control equipment, and workshop pneumatic circuits. The 100 m supply length allows individual tube sections to be prepared according to installation requirements. Listed under the Air Hose Coil category, this Panacea Technology tube is designed for compressed-air line applications.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 8 mm

Wall Thickness : 2 mm

OD (mm) : 12 mm

Working Temperature : -20 to + 70 °C

Radius : 35

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology PU Ester Tube 16 mm OD 12 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹15,339 - ₹15,339

You save ₹1,299!

7.81% OFF

Panacea Technology PU Ester Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) is designed for pneumatic air routing where accurate tube dimensions and dependable compatibility with fittings are essential. With a 16 mm outer diameter and 12 mm inner diameter, this PU ester tube provides a defined internal passage for compressed-air movement through suitable pneumatic circuits. The polyurethane construction offers a flexible tubing format that can be routed around equipment and connected components according to installation requirements. Supplied in a 100 m roll, it provides a substantial continuous length for planned pneumatic layouts and helps simplify cutting and positioning during installation.Panacea Technology PU Ester Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) is suitable for use with compatible pneumatic fittings, valves, air preparation assemblies, and other compressed-air equipment matching its specified dimensions. The roll configuration makes it convenient for creating customized tube lengths across machinery, automation equipment, and workshop air systems. Its defined 16 mm OD and 12 mm ID specifications also make selection easier when matching tubing with the required connectors and components. Listed under the Air Hose Coil category, this Panacea Technology tube is intended for structured pneumatic air-line installation and routing applications.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 12 mm

Working Pressure : Vacuum to 12 Bar

Wall Thickness : 2 mm

OD (mm) : 16 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 15 days

Panacea Technology PA12 Tube 16 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹51,919 - ₹51,919

You save ₹4,131!

7.37% OFF

Panacea Technology PA12 Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) is a pneumatic tubing option with a 16 mm outer diameter and 11 mm inner diameter, providing a calculated wall thickness of 2.5 mm. The defined bore is suitable for pneumatic air passage when paired with correctly sized connection components. Its PA12 construction identifies the tube material, while the dimensional profile supports accurate selection for air-line layouts, machine assemblies, automation equipment, and pneumatic control arrangements. Supplied as a 100 m roll, the tubing can be measured and cut into required lengths for different installation requirements.Panacea Technology PA12 Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic fittings, connectors, valves, regulators, cylinders, and actuators according to system specifications. The 11 mm internal diameter defines the passage size, while the 16 mm outside diameter helps determine suitable clamps, supports, and connection hardware. The 100 m roll format allows users to prepare tube sections for equipment installation, replacement, maintenance, or pneumatic circuit routing. Classified under the Air Hose Coil category, this Panacea Technology product offers a clearly specified PA12 tube size for industrial compressed-air applications.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 11 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 2.5 mm

OD (mm) : 16 mm

Working Temperature : -40 to + 100 °C

Radius : 90

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 14 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹10,029 - ₹42,479

You save ₹4,013!

8.63% OFF

Panacea Technology PA12 Tube 14 mm OD 11 mm ID (Pack of 100 m Roll) is designed for pneumatic air-line applications requiring an 11 mm internal passage within a 14 mm outer profile. It features a 14 mm outer diameter and 11 mm inner diameter, resulting in a 1.5 mm wall thickness for use with appropriately matched pneumatic fittings. The 100 m roll format provides a continuous tubing length that can be divided according to the requirements of automation machinery, pneumatic control systems, equipment connections, and industrial air circuits. Its PA12 construction offers a clearly defined material specification for applications where both tube composition and dimensional compatibility are considered.Panacea Technology PA12 Tube 14 mm OD 11 mm ID (Pack of 100 m Roll) can be integrated with suitable push-in connectors, valves, regulators, cylinders, actuators, and related pneumatic components. The 11 mm bore establishes the internal passage, while the 14 mm external dimension helps in identifying compatible fittings, clamps, and tube supports. Supplied in a 100 m roll, the tubing can be prepared into sections for new installations, replacement work, machine connections, or pneumatic circuit modifications. Listed under the Air Hose Coil category, this Panacea Technology tube provides a defined PA12 profile for organized compressed-air routing in industrial setups.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 11 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1.5 mm

OD (mm) : 14 mm

Working Temperature : -40 to + 100 °C

Radius : 80

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 15 days

Panacea Technology PA12 Tube 16 mm OD 12 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹42,479 - ₹42,479

You save ₹4,013!

8.63% OFF

Panacea Technology PA12 Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) is a pneumatic tubing component specified with a 16 mm outside diameter and 12 mm inside diameter, giving a calculated wall thickness of 2 mm. The larger 12 mm bore provides a defined internal path for compatible pneumatic air circuits, while the 16 mm external dimension helps in selecting matching fittings and tube accessories. Manufactured with PA12 material, this tube is suited to applications involving pneumatic machinery, automation assemblies, control systems, and equipment air connections. The 100 m roll format allows the tubing to be portioned into lengths according to installation requirements.Panacea Technology PA12 Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) can be incorporated with suitably sized connectors, push-in fittings, valves, regulators, cylinders, and actuators based on the system configuration. Its dimensional combination provides a clear reference when planning tube routing, connection points, clamps, and supports. The continuous roll length is useful for preparing multiple sections during machine installation, replacement work, maintenance, or pneumatic circuit adjustments. Listed under the Air Hose Coil category, this Panacea Technology PA12 tube provides a defined size and material profile for organized compressed-air connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 12 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 2 mm

OD (mm) : 16 mm

Working Temperature : -40 to + 100 °C

Radius : 90

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 4 mm OD 2 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,539 - ₹21,239

You save ₹591!

11.92% OFF

Panacea Technology PA12 Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) is a compact pneumatic tube designed with a 4 mm outer diameter and 2 mm inner diameter, giving it a calculated wall thickness of 1 mm. Its small internal passage makes the dimensional profile relevant for pneumatic control layouts, compact equipment connections, instrumentation, and automation assemblies where appropriately sized tubing is required. Constructed from PA12, the tube has a defined material specification for system selection and component matching. The 100 m roll provides a continuous length that can be divided into individual sections according to the requirements of the installation.Panacea Technology PA12 Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) can be paired with compatible miniature pneumatic fittings, connectors, valves, regulators, actuators, and other components. The 2 mm bore establishes the internal passage, while the 4 mm outside diameter serves as a reference for selecting suitable connection hardware and tube supports. Its roll format is convenient for preparing multiple lengths during machine assembly, maintenance, replacement, or pneumatic circuit routing. Listed under the Air Hose Coil category, this Panacea Technology PA12 tube provides a clearly defined small-diameter option for organized pneumatic connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 2 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1 mm

OD (mm) : 4 mm

Working Temperature : -40 to + 100 °C

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 15 days

Panacea Technology PA12 Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,539 - ₹3,539

You save ₹473!

11.79% OFF

Panacea Technology PA12 Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a small-format pneumatic tubing option featuring a 4 mm outer diameter and 2.5 mm inner diameter, resulting in a calculated wall thickness of 0.75 mm. Its compact profile is suited to pneumatic layouts where space-conscious tube dimensions are required for equipment connections, control assemblies, instrumentation, and automation systems. Made with PA12 material, it offers a defined construction specification for selecting tubing according to system requirements. The 100 m roll format provides a continuous length that can be measured and separated into individual sections for installation or replacement work.Panacea Technology PA12 Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be matched with appropriately sized pneumatic fittings, miniature connectors, valves, regulators, actuators, and related components. The 2.5 mm internal diameter identifies the available passage, while the 4 mm outside diameter helps establish compatibility with connection hardware and supports. The extended roll length is practical when multiple tube sections are needed across machinery or pneumatic circuits. Classified under the Air Hose Coil category, this Panacea Technology PA12 tube provides a clearly defined dimensional combination for compact compressed-air connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 2.5 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 0.75 mm

OD (mm) : 4 mm

Working Temperature : -40 to + 100 °C

Radius : 10

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹7,197 - ₹7,197

You save ₹1,063!

12.87% OFF

Panacea Technology PA12 Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) features a 6 mm outer diameter and 4 mm inner diameter, giving the tube a calculated wall thickness of 1 mm. This dimensional configuration provides a defined internal passage for compatible pneumatic air connections and supports accurate matching with suitable fittings. Made from PA12, the tubing is specified for use across pneumatic equipment, automation assemblies, control arrangements, and machine air-line layouts. The 100 m roll format provides a continuous supply that can be divided into application-specific lengths, making it suitable for installations where several tube sections are required.Panacea Technology PA12 Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be incorporated with appropriately sized push-in fittings, connectors, valves, regulators, cylinders, actuators, and related pneumatic components. Its 4 mm bore and 6 mm external diameter provide clear dimensional references when selecting connection accessories, clamps, and supports. The roll can be cut according to routing requirements during equipment assembly, maintenance, replacement, or pneumatic circuit modification. Categorized under Air Hose Coil, this Panacea Technology PA12 tube offers a specific size combination for structured compressed-air connections in industrial and automation applications.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 4 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1 mm

OD (mm) : 6 mm

Working Temperature : -40 to + 100 °C

Radius : 15

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 6 mm OD 3 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹7,197 - ₹30,679

You save ₹1,063!

12.87% OFF

Panacea Technology PA12 Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) is a precision-sized pneumatic tube with a 6 mm outside diameter and 3 mm inside diameter, providing a calculated wall thickness of 1.5 mm. The balanced dimensional profile makes it suitable for pneumatic control arrangements, automation equipment, instrumentation connections, and compact air-line assemblies that require correctly sized tubing. Its PA12 construction gives the product a clearly defined material specification for catalogue selection and system planning. Supplied in a 100 m roll, the tube offers sufficient continuous length for preparing individual sections according to the layout of the pneumatic installation.Panacea Technology PA12 Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) can be connected with suitable pneumatic fittings, push-in connectors, valves, regulators, cylinders, actuators, and other compatible components. The 3 mm internal diameter identifies the air passage, while the 6 mm external diameter helps determine suitable connection hardware, clips, and tube supports. The roll format allows users to cut required lengths for machine assembly, servicing, replacement, or circuit reconfiguration. Classified under the Air Hose Coil category, this Panacea Technology tube provides a defined PA12 profile for compact compressed-air routing and pneumatic equipment connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 3 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1.5 mm

OD (mm) : 6 mm

Working Temperature : -40 to + 100 °C

Radius : 15

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 14 days

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 8 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹6,725 - ₹6,725

You save ₹945!

12.32% OFF

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 8 mm ID (Pack of 100 m Roll) is designed for pneumatic air-line assemblies requiring an 8 mm internal bore within a 12 mm external profile. It has a 12 mm outer diameter and 8 mm inner diameter, resulting in a 2 mm wall thickness for use with compatible pneumatic fittings. The 100 m roll format provides a substantial length for preparing tubing sections across machinery, automation equipment, air circuits, and control installations. Its polyamide PU construction makes it suitable for applications where a clearly defined tube size and practical routing format are required.Panacea Technology Advanced Polyamide PU Tube 12 mm OD 8 mm ID (Pack of 100 m Roll) provides flexibility when planning pneumatic connections that use compatible valves, regulators, cylinders, actuators, and fittings. The 8 mm internal passage establishes the bore size for suitable compressed-air applications, while the 12 mm outer diameter helps determine matching connectors, clamps, and supports. The long roll can be measured and cut into individual sections for equipment installation, circuit alterations, or replacement requirements. As an Air Hose Coil, this Panacea Technology tube offers a defined dimensional combination for industrial pneumatic systems where extended tubing length is useful for organized air-line routing.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 8 mm

Wall Thickness : 2 mm

OD (mm) : 12 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 14 days

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 9 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹6,135 - ₹6,135

You save ₹827!

11.88% OFF

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 9 mm ID (Pack of 100 m Roll) is a pneumatic tubing option specified with a 12 mm outer diameter and 9 mm inner diameter, giving it a 1.5 mm wall thickness. This dimensional combination is intended for air-line layouts where the tubing profile must correspond with the selected pneumatic fittings and accessories. Supplied in a 100 m roll, it provides continuous material that can be divided into suitable lengths for machinery, automation equipment, pneumatic panels, and connection routes. The polyamide PU construction makes it suitable for structured installations where tube sizing and convenient handling are important.Panacea Technology Advanced Polyamide PU Tube 12 mm OD 9 mm ID (Pack of 100 m Roll) can be incorporated into compatible pneumatic assemblies using suitable connectors, valves, regulators, cylinders, actuators, and related components. Its 9 mm internal bore defines the available passage for compatible compressed-air applications, while the 12 mm external diameter assists in selecting matching fittings and support hardware. The 100 m roll can be portioned for individual air-line sections, replacement lengths, or layout changes as required. As an Air Hose Coil from Panacea Technology, this tube is suitable for industrial pneumatic systems requiring a defined bore, outer diameter, and extended roll length.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 9 mm

Wall Thickness : 1.5 mm

OD (mm) : 12 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 14 days

Panacea Technology Antispatter PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,545 - ₹5,545

You save ₹827!

12.98% OFF

Panacea Technology Antispatter PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a compact pneumatic tube designed for air-line arrangements where limited installation space and a specific tube profile are required. It features a 4 mm outer diameter and 2.5 mm inner diameter, resulting in a 0.75 mm wall thickness for use with compatible pneumatic fittings. The 100 m roll provides a continuous tubing length that can be cut into individual sections for automation assemblies, instrument connections, compact machinery, and pneumatic control layouts. Its antispatter PU construction makes it suitable for installations where tubing is routed around equipment operating in spatter-prone environments.Panacea Technology Antispatter PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be paired with appropriately sized connectors, valves, regulators, actuators, cylinders, and other pneumatic components. The 2.5 mm internal bore defines the passage available for compatible compressed-air applications, while the 4 mm outside diameter helps identify suitable fittings, clips, and supports. The 100 m roll format allows tubing to be prepared in lengths suited to individual connection points, replacements, or compact circuit layouts. As an Air Hose Coil, this Panacea Technology product provides a defined small-diameter profile for organized pneumatic routing in industrial applications.

Type of Product : Antispatter PU Tube

Material : PU FRPVC

ID (mm) : 2.5 mm

OD (mm) : 4 mm

Working Temperature : -20 to + 70 °C

Radius : 10

Pack of : Roll of 100 m

Explore other Variants (6)

Ships within 14 days

Panacea Technology Antispatter PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹4,955 - ₹4,955

You save ₹709!

12.52% OFF

Panacea Technology Antispatter PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) is suited to pneumatic installations that call for a compact tube with a 4 mm internal passage. It measures 6 mm in outer diameter and 4 mm in inner diameter, giving a 1 mm wall thickness for use with appropriately matched pneumatic fittings. The 100 m roll provides a useful length for preparing individual sections across automation equipment, machinery, welding workstations, and air-control assemblies. Its antispatter PU construction makes this tubing relevant to pneumatic routing where the surrounding work area may involve spatter-producing processes.Panacea Technology Antispatter PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be assembled with compatible push-in fittings, valves, regulators, cylinders, actuators, and related pneumatic hardware. The 4 mm bore establishes the internal passage for suitable compressed-air applications, while the 6 mm external dimension assists in selecting matching connection components and tube supports. With 100 m supplied on the roll, required lengths can be prepared for new circuits, equipment connections, maintenance, or replacement work. Classified under Air Hose Coil, this Panacea Technology tube offers a defined size combination for organized pneumatic air-line routing in industrial environments.

Type of Product : Antispatter PU Tube

Material : PU FRPVC

ID (mm) : 4 mm

Wall Thickness : 1 mm

OD (mm) : 6 mm

Working Temperature : -20 to + 70 °C

Radius : 12

Pack of : Roll of 100 m

Explore other Variants (6)

Ships within 15 days

Panacea Technology PA12 Tube 10 mm OD 7 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹18,879 - ₹18,879

You save ₹2,243!

10.62% OFF

Panacea Technology PA12 Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is specified with a 10 mm outside diameter and 7 mm inside diameter, resulting in a calculated wall thickness of 1.5 mm. This tube size provides a defined internal route for pneumatic air and can be selected for equipment connections, automation machinery, control assemblies, and industrial air-line configurations. Its PA12 construction identifies the material used for the tubing, while the stated dimensions assist in matching it with compatible pneumatic components. Supplied in a 100 m roll, the tubing can be measured and cut into individual lengths according to the requirements of a particular installation or machine layout.Panacea Technology PA12 Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) can be connected with suitable pneumatic fittings, push-in connectors, valves, regulators, cylinders, actuators, and related accessories. The 7 mm internal diameter establishes the passage size, whereas the 10 mm external diameter helps determine appropriate fittings, clamps, and support hardware. The 100 m roll format is practical for installations involving multiple tube sections, servicing work, equipment replacement, or pneumatic circuit modifications. Listed under the Air Hose Coil category, this Panacea Technology PA12 tube provides a defined dimensional profile for compressed-air routing applications.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 7 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Working Temperature : -40 to + 100 °C

Radius : 42

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹12,979 - ₹12,979

You save ₹945!

6.79% OFF

Panacea Technology PA12 Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) provides a defined pneumatic tubing profile with an 8 mm outside diameter and 5.5 mm inside diameter, giving a calculated wall thickness of 1.25 mm. This size combination offers a specified internal passage for pneumatic air routing and helps simplify dimensional selection when planning connections for machinery, automation systems, control equipment, and industrial air circuits. The PA12 material identifies the tube construction, allowing it to be considered alongside compatible pneumatic components. Supplied in a 100 m roll, it can be divided into suitable lengths for different installation layouts and equipment requirements.Panacea Technology PA12 Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) can be used with suitably matched fittings, connectors, valves, regulators, cylinders, actuators, and tube accessories. Its 5.5 mm bore establishes the internal opening, while the 8 mm external dimension assists in determining compatible connection hardware and supports. The extended roll length is useful when several sections are required for machine installation, maintenance, component replacement, or pneumatic circuit changes. Categorized under Air Hose Coil, this Panacea Technology PA12 tube presents a specific dimensional and material configuration for organized compressed-air connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 5.5 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1.25 mm

OD (mm) : 8 mm

Working Temperature : -40 to + 100 °C

Radius : 25

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 14 days

Panacea Technology Advanced Polyamide PU Tube 14 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹9,439 - ₹9,439

You save ₹1,417!

13.05% OFF

Panacea Technology Advanced Polyamide PU Tube 14 mm OD 11 mm ID (Pack of 100 m Roll) is developed for pneumatic systems that require accurately sized tubing for air line connections and routing. It features a 14 mm outer diameter and 11 mm inner diameter, giving it a 1.5 mm wall thickness for integration with compatible pneumatic fittings and components. Supplied in a 100 m roll, this tubing provides a substantial continuous length for installations involving multiple connection points or extended air lines. Its polyamide PU construction makes it suitable for structured pneumatic setups where defined dimensions and manageable tubing are important for assembly.Panacea Technology Advanced Polyamide PU Tube 14 mm OD 11 mm ID (Pack of 100 m Roll) can be incorporated with compatible regulators, valves, actuators, connectors, and other air preparation components. The generous roll length allows the tube to be measured and cut as required, helping accommodate different routing layouts within pneumatic equipment. Its 11 mm internal diameter establishes the available passage size, while the 14 mm external diameter provides a clear reference when selecting compatible fittings, clips, or supports. This Panacea Technology tubing is suited to industrial pneumatic applications requiring specific dimensional configuration and convenient bulk-length supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 11 mm

Wall Thickness : 1.5 mm

OD (mm) : 14 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 14 days

Panacea Technology Antispatter PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹12,979 - ₹12,979

You save ₹1,889!

12.71% OFF

Panacea Technology Antispatter PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is configured for pneumatic systems where a 5.5 mm internal bore is required within an 8 mm tube profile. The 8 mm outer diameter and 5.5 mm inner diameter provide a 1.25 mm wall thickness for use with compatible pneumatic connection hardware. Supplied in a 100 m roll, this tubing can be portioned according to the routing needs of automation assemblies, machinery, welding setups, air-control circuits, and equipment installations. The antispatter PU construction makes it applicable to tube routing in workspaces associated with spatter-generating processes, while its defined dimensions simplify selection against the required pneumatic components.Panacea Technology Antispatter PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) can be connected with suitably sized push-in fittings, valves, regulators, cylinders, actuators, and other pneumatic hardware. Its 5.5 mm bore specifies the internal passage, while the 8 mm external size helps identify corresponding fittings and securing accessories. The 100 m roll allows users to prepare individual lengths for machine connections, circuit alterations, replacement sections, or fresh pneumatic layouts. Listed under the Air Hose Coil category, this Panacea Technology tube offers a specific dimensional combination for structured compressed-air routing across industrial applications.

Type of Product : Antispatter PU Tube

Material : PU FRPVC

ID (mm) : 5.5 mm

Wall Thickness : 1.25 mm

OD (mm) : 8 mm

Working Temperature : -20 to + 70 °C

Radius : 20

Pack of : Roll of 100 m

Explore other Variants (6)

Ships within 14 days

Panacea Technology Antispatter PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹8,731 - ₹8,731

You save ₹1,299!

12.95% OFF

Panacea Technology Antispatter PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) is intended for pneumatic layouts requiring a 5 mm internal passage within an 8 mm external profile. It has an 8 mm outer diameter and 5 mm inner diameter, resulting in a 1.5 mm wall thickness for use with suitably matched pneumatic fittings. The 100 m roll format provides ample tubing for creating multiple connection sections in automation systems, machinery, control panels, welding equipment, and compressed-air arrangements. Its antispatter PU construction makes the tube relevant to pneumatic routing in work areas where spatter-producing operations are part of the surrounding setup.Panacea Technology Antispatter PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) can be used with compatible push-in fittings, regulators, valves, cylinders, actuators, and other pneumatic components. The 5 mm bore identifies the internal air passage, while the 8 mm outside diameter helps in selecting suitable connectors, clamps, and tube supports. Supplied as a 100 m roll, the tubing can be measured and cut according to individual circuit requirements, whether for new installations, equipment modifications, or replacement sections. As an Air Hose Coil, this Panacea Technology tube provides a clearly defined dimensional profile for organized pneumatic air-line routing.

Type of Product : Antispatter PU Tube

Material : PU FRPVC

ID (mm) : 5 mm

Wall Thickness : 1.5 mm

OD (mm) : 8 mm

Working Temperature : -20 to + 70 °C

Radius : 20

Pack of : Roll of 100 m

Explore other Variants (6)

Ships within 15 days

Panacea Technology PA12 Tube 12 mm OD 10 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹12,979 - ₹36,579

You save ₹1,771!

9.68% OFF

Panacea Technology PA12 Tube 12 mm OD 10 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution featuring a 12 mm outer diameter and 10 mm inner diameter, giving it a 1 mm wall thickness. The 10 mm internal bore provides a defined passage for compatible compressed-air applications, while the specified outer profile supports selection of suitable pneumatic fittings and accessories. Supplied in a 100 m roll, the tube can be measured and cut for use in automation machinery, pneumatic control systems, equipment connections, and industrial air-line arrangements. Its PA12 tube construction provides a distinct material specification for applications where the tubing material is an important part of product selection.Panacea Technology PA12 Tube 12 mm OD 10 mm ID (Pack of 100 m Roll) can be paired with appropriately sized push-in connectors, valves, regulators, cylinders, actuators, and other pneumatic components. The 10 mm bore and 12 mm outside diameter make dimensional matching straightforward when planning tube connections, supports, and routing paths. The 100 m roll format is suitable for preparing individual lengths for installation, maintenance, replacement sections, or pneumatic circuit modifications. Listed under the Air Hose Coil category, this Panacea Technology product provides a clearly specified PA12 tubing profile for organized compressed-air routing across industrial setups.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 10 mm

Wall Thickness : 1 mm

OD (mm) : 12 mm

Working Temperature : -40 to + 100 °C

Radius : 90

Pack of : Roll of 100 m

Explore other Variants (9)

Previous Next

Page 1 of 2 results