Showing 40 out of 208 products
Type of Product : Stainless Steel Steam Trap
Material : Stainless Steel
Model No : IC-3
Body Test Pressure : 63.3 kg/cm² 900 Psig. (Hyd.)
End Connection Type : Screwed
Working Pressure : Suitable for 450 Psig. (31.65 kg/cm²)
Trim : AISI 420
Maximum Temperature : 400ºC (750ºF)
Type of Product : Pressure Reducing Valve
Model No : PRV
Material : Forged Brass
Body Test Pressure : 16barg Hyd. (232Psig. Hyd.)
Max. Inlet Pressure P1(bar) : 16 barg
Outlet Pressure : P2 Range (Bar) 1:6
Fluid : Water, compressed air
Model No : FBV 5
Body Material : Forged Brass
End Connection Type : Screwed
Body Test Pressure : 1.05 MPa
Type of Product : Gun Metal Foot Valve
Model No : IS 21
End Connection Type : Screwed
Seat Type : Integral seat
Test Pressure : 300 Psig. Hyd
Related Searches
Type of Product : Bronze Safety Valve
Disc Type : Renewable Disc
Seat Type : Integral
Trim : Cu-Alloy
Body Material : Bronze
Type of Product : Air Vent Valve
Material : Brass
Model No : AV
End Connection Type : Spring Loaded
Temperature : 100°C Max.
Class : PN 1.6
Type of Product : Ball Valve
Port Opening : Full Bore
Body Material : Stainless Steel
Stem : SS 316
Seat Type : Renewable PTFE Seat
Model No : SSBVS
Body Material cum standard : SS CF 8 M
End Details : Screwed Female BSP Taper Threads
Type of Ball : CF-8M/SS 316
Body Test Pressure : 100kg/cm²g Hyd.
Type of Product : Bronze Sight Glass
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
End Details : Screwed female BSP Taper Threads to BS-21
Type of Product : Ball Foot Valve
Strainer : Cast Iron to IS:210 FG 260
Body Material : Cast Iron
Class : PN16
Pattern Type : Y Type Pattern
Body Material cum standard : Cast Iron to IS:210 FG 200
Seat Ring : Nitrile Rubber
Type of Ball : MS Rubber Coated
Body Test Pressure : 2.4MPa (Hyd.)
Seat Test Pressure : 1.6MPa (Hyd.)
Type of Product : Single Plate Check Valve
Body Material : Ductile Iron
Disc Type : Carbon Steel + Ni Plate
Class : PN-16
Disc Material : Carbon Steel
Seat Type : EPDM
End Connection Type : Wafer Type
Body Test Pressure : 24kg/cm²g (Hyd.)
Seat Test Pressure : 16kg/cm²g (Hyd.)
Seat Type : Renewable Seat
Disc Type : Renewable Disc
Type of Product : Single Post Full Lift Safety Valve
Trim : SS to AISI 304
Model No : CS 12
Pattern Type : Right Angle
Material : Cast Steel
Body Test Pressure : 53kg/cm²g Hyd
Outlet Flange : BS 10 Table-E
Inlet Flange : BS 10 Table-H
Maximum Working Temperature : 425°C
Maximum Working Pressure : 26.5kg/cm²g
Type of Product : Check Valve
Body Material : Ductile Iron
Disc Type : SS 304 (CF-8)
Class : PN-25
Seat Type : EPDM Rubber Lining
Trim : Spring & Pins SS
Product Sub Type : Wafer Type
Body Test Pressure : 3.8 MPa Hyd
Seat Test Pressure : 2.7 MPa Hyd
Type of Product : Butterfly Valve with Pneumatic Actuator
End Connection Type : Wafer Type
Body Test Pressure : 1.5 MPa (220Psig.) Hyd.
Model No : CIBFP
Pattern Type : Water Type
Body Material : Cast Iron
Class : PN 1.0
End Details : Suitable insertion between flanges as per BS 10 Table
Stem : AISI-410
Disc Material : Stainless Steel 304
Working Pressure : PN 16
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.10 MPa 160Psig.). Hyd.
Type of Product : Butterfly Valve Wafer Type (Gear Operated)
Body Material : Cast Iron
End Details : Flanges As Asme B 16.1 Or Class -125
Pressure : PN16
Lining Material : EPDM
Seat Test Pressure : 1.8 MPa (Hyd.)
Type of Product : Brass Bib Tap
Test Pressure : 1.5MPa Hyd
Product Standard : IS-781
End Details : Male threads as per IS-554 (Parallel)
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa Hyd. (348 Psig.)
Model No : CR 28C
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN 1.6
End Details : Suitable insertion between Flanges as per BS-10 Table D/E CI-125
Stem : AISI-304 Stainless Steel
Operated By : Lever Operated
Disc Material : CF-8M Stainless Steel
Seat Test Pressure : 1.6 MPa Hyd. (232 Psig.)
Type of Product : Gate Valve
Disc Type : Solid Wedge
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Peglar Type PN-20
Body Material : Bronze
End Details : Screwed female BSP threads to BS-21
Body Test Pressure : 30.06kg/cm²g Hyd
Body Material cum standard : GM IS 318 Gr. LTB 2
Seat Test Pressure : 20.40kg/cm²g Hyd.
Type of Product : Bronze Globe Steam Stop Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : SS AISI-410
Body Material : Bronze
Gland Packing : Graphited Asbestos
Type of Product : Wheel Operated Gate Valve
Model No : IS 5
Seat Test Pressure : 1.6MPa Hyd
Trim : Cu-Alloy
Body Test Pressure : 2.4MPa Hyd
Product Standard : IS-778
Seat Type : Integral seat
Class : Class-2
Body Material : Gun Metal
Type of Product : Steam Trap
Material : Bronze
Model No : IBR 20
End Connection Type : Screwed
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
End Details : Screwed female BSP Taper threads to BS-21
Trim : Stainless Steel AISI-410
Type of Product : Wedge Gate Sluice Valve
Model No : CR 19
Seat Test Pressure : 1.0 MPa Hyd
Trim : Cu-Alloy Seats, Stem SS AISI 410
Body Test Pressure : 1.5 MPa Hyd
Product Standard : Face to Face, flange dimensions as per IS-780
Seat Type : Renewable
Class : PN 1.0
End Details : Flanges as per IS-780/IS-1538 FF Drilled
Body Material : Cast Iron
Type of Product : Butterfly Valve
Body Test Pressure : 3.0 MPa Hyd.
Model No : CR 27A
Pattern Type : Wafer Type
Body Material : Cast Iron
Class : PN20
End Details : Suitable insertion between Flanges as per BS-10 Table D/E or ASME B 16.1, Class-125
Stem : SS AISI-410
Operated By : Lever Operated
Disc Material : Stainless Steel 304
Lining Material : Nitrile/EPDM
Seat Test Pressure : 2.2 MPa Hyd
Type of Product : Thermodynamic Steam Trap
Material : Forged Stainless Steel
Model No : FSV 4A
Body Test Pressure : 63.3 kg/cm²g 900Psig. Hyd.
End Connection Type : Screwed
Working Pressure : Suitable for max. BOP 450Psig.(31.65kg/cm²g)
at 750ºF (400ºC)
Trim : SS AISI-410
Type of Product : Fusible Plug
Model No : IBR 13A
Pattern Type : Two piece design
Standard : IBR Clause 282 (a) IV GrB
Material : Bronze
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435°F(225°C)
Seat Type : Integral
Disc Type : Renewable Disc
Type of Product : Relief Valve
Trim : Cu-Alloy
Model No : IBR 21
Material : Gun metal
Type of Product : Bronze Vertical Non Return Valve
Model No : IBR 4A
Body Material : Bronze
Seat Type : Renewable Seat
Disc Type : Renewable Disc
Trim : AISI-410 Stainless Steel
Type of Product : Gun Metal Right Angle Globe Valve No. 4
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Angle Type
End Details : Screwed female threads BSP (Parallel
Body Test Pressure : 300 Psig. Hyd
Seat Test Pressure : 200 Psig. Hyd
Type of Product : Gun Metal Gate Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-1
Product Standard : IS-778
End Details : Flanges as per IS-778 CI-1 F.F. undrilled
Body Test Pressure : 1.5MPa Hyd.
Seat Test Pressure : 1.0MPa Hyd
Type of Wedge : Solid wedge
Type of Product : Wheel Operated Globe Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-2
Product Standard : IS-778
Material : Gun Metal
End Connection Type : Screwed
Body Test Pressure : 2.4MPa Hyd.
Seat Test Pressure : 1.6MPa Hyd.
Type of Product : Globe Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-1
Product Standard : IS-778
End Details : Screwed female threads IS-554 Parallel
End Connection Type : Screwed
Body Test Pressure : 1.5MPa Hyd.
Seat Test Pressure : 1.0MPa Hyd
Type of Product : Stop Cum Non Return Valve
Working Pressure : Max BOP 13kgf/cm²g at 220ºC Steam
Body Material : Cast Iron
Product Standard : BS-5152
Disc Type : Renewable Disc
Pattern Type : Straight Type / Right Angle
Seat Type : Renewable
Trim : AISI-410 Stainless Steel
Type of Product : Bronze Fusible Plug
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
Pattern Type : Two piece design
End Details : Screwed male BSP Taper thread to BS-21
Type of Product : Ball Valve
Trim : Stem, Ball Stainless Steel AISI-304
Body Material : Stainless Steel 304
Class : PN-40
Seat Type : Renewable Teflon
Model No : IC-1
Body Test Pressure : 60kg/cm² Hyd
Seat Test Pressure : 40kg/cm² Hyd
End Connection Type : Screwed
Type of Product : Ball Valve
Trim : AISI 410 Stem Stainless Steel AISI 304 Ball
Body Material : Cast Iron
Product Standard : IS-9890 -1981 Class-125
Seat Type : Renewable Teflon Seat
Model No : CI 18
Body Test Pressure : 21barg 300Psig. Hyd.
Seat Test Pressure : 220Psig.(15.4barg) Hyd. & 100Psig. (6.9 bar)
End Connection Type : Flanged
Type of Product : Butterfly Valve
End Connection Type : Short Wafer Type
Body Test Pressure : 2.4 MPa (348 Psig Hyd.)
Model No : CR 21A
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN-16
End Details : Suitable insertion between Flanges as per BS-10 Table D/E
ANSI B 16.1 CI-125
Disc Material : SG Iron
Working Pressure : PN 16
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.6 MPa (200 Psig Hyd.)
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Body Material : Cast Steel
Class : Class-150
Product Standard : Conforming to BS 1873-1975 Class-150
End Details : Flanges as per ASME B 16.5 Class-150 Undrilled
Stem : SS AISI-410 component with Aluminum Bronze Yoke Bush
Body Test Pressure : 30barg Hyd. (435Psig.)
Seat Test Pressure : 22barg Hyd. (320Psig.), 6.9 Barg Air (100 Psig.)
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa (348 Psig Hyd.)
Model No : CR 22A
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN-16
End Details : Suitable insertion between Flanges as per BS-10 Table D/E ANSI B 16.1 CI-125
Stem : AISI-410 Stainless Steel
Disc Material : Stainless Steel 304
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.6 MPa (200 Psig Hyd.)
Type of Product : Wheel Operated Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : Stainless Steel AISI-410
Class : PN-40
Product Standard : BS 5160
Material : Cast Steel
End Connection Type : Flanged
Body Test Pressure : 76barg (1100 Psig.) Hyd
Seat Test Pressure : 40barg (580 Psig.) Hyd
Page 1 of 6 results
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
