• Home /
• All Brands /
• Sarrah

Have a question? Call us now at +91 9650660070

Sarrah

Showing 40 out of 121 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

Sarrah 100 mm (4 Inch) Diamond Polishing Pad (Grit Size 200 to 10000 Grit)

By Sarrah

Pack of 5 piece

₹376 - ₹990

You save ₹605!

55.05% OFF

The Sarrah 100 mm (4 Inch) Diamond Polishing Pad (Grit Size 200 to 10000 Grit) is designed for step-by-step surface finishing on hard construction and stone materials. Manufactured using high-grade diamond abrasives embedded in a resin-bonded matrix, these pads provide controlled abrasion across a wide grit range. The 4-inch diameter supports stable operation with standard polishing tools and angle grinders, enabling smooth handling during polishing tasks. Each grit level is precisely formulated to ensure uniform material contact, allowing gradual surface refinement from initial grinding to fine polishing. The flexible pad structure adapts well to flat and mildly contoured surfaces, supporting consistent polishing performance during wet applications.
This diamond polishing pad series is suitable for polishing granite, marble, engineered stone, concrete, terrazzo, and similar dense surfaces. Lower grit sizes assist in removing scratches and surface irregularities, while higher grit options up to 10000 are used for achieving refined finishes and improved surface smoothness. The balanced construction helps reduce vibration and supports even wear throughout use. Designed for durability, the pad maintains polishing efficiency over repeated operations. Its standard size and broad grit range make it suitable for use in stone fabrication units, workshops, and on-site surface finishing environments.

Type of Product : Diamond Polishing Pad

Grit Material : ‎Diamond

Diameter (mm) : 100 mm

Diameter (Inch) : 4 Inch

Explore other Variants (24)

Ships within 3 days

Sarrah 125 mm (5 Inch) 800, 1000, 1200, 1500, 2000 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 30 pcs)

By Sarrah

Pack of 30 piece

₹365 - ₹943

You save ₹963!

53.5% OFF

Sarrah 125 mm (5 Inch) 800, 1000, 1200, 1500, 2000 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 800, 1000, 1200, 1500, 2000 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (6)

Ships within 3 days

Sarrah 100 mm (4 Inch) 50 to 6000 Grit Diamond Polishing Pad (Pack of 10 Pcs)

By Sarrah

Pack of 10 piece

₹884   ₹2,500

You save ₹1,616!

64.64% OFF

Elevate your polishing projects with the Sarrah 100 mm (4 Inch) 6000 Grit Diamond Polishing Pad Set. This premium pack contains 10 high-quality diamond polishing pads, designed to deliver a superior finish on various surfaces, including granite, marble, concrete, and other stone materials. With a grit rating of 6000, these polishing pads are perfect for achieving a mirror-like shine and enhancing the natural beauty of your surfaces. The diamond abrasive technology ensures efficient material removal while minimizing scratches, providing a smooth and flawless finish every time. Each pad features a 100 mm diameter, making them compatible with standard polishers for quick and easy attachment. Built to withstand rigorous use, these pads maintain their performance and durability, ensuring long-lasting results for both professionals and DIY enthusiasts. Whether you're restoring old surfaces or finishing new installations, the Sarrah 6000 Grit Diamond Polishing Pad Set is your go-to solution for exceptional polishing results.

Add to Cart Buy Now

Ships within 3 days

Sarrah 4 inch(100 mm), Grit Size 50 to 6000 Diamond Polishing Pads (Pack of 10 Pcs)

By Sarrah

Pack of 10 piece

₹990   ₹2,500

You save ₹1,510!

60.4% OFF

The Sarrah 4 inch(100 mm), Grit Size 50 to 6000 Diamond Polishing Pads (Pack of 10 Pcs) are designed to provide superior polishing performance for stone surfaces, including granite, marble, concrete, and other natural stones. These high-quality pads feature premium diamond grit, ensuring effective grinding and a smooth, glossy finish on even the most challenging surfaces. Ideal for both professional and DIY applications, these pads deliver precise, consistent results, making them a valuable addition to any polishing toolkit. Built for durability and long-lasting performance, Sarrah Diamond Polishing Pads are perfect for wet or dry polishing, offering flexibility based on the project requirements. Their 4-inch (100 mm) size is ideal for maneuverability in tight or contoured spaces, allowing for detailed work on edges and curved surfaces. Compatible with standard polishing tools, these pads are easy to use and help achieve a mirror-like finish, enhancing the natural beauty of the polished material.

Add to Cart Buy Now

Related Searches

sarrah polishing pad

sarrah sanding disc

sarrah diamond dressing tools

sarrah sand paper sheets

sarrah wire brushes

Ships within 3 days

Sarrah 3000, 5000, 7000, 10000 Grit Silicon Carbide Wet/Dry Waterproof Sand Paper 228.6 x 279.4 mm (Pack of 4 Pcs)

By Sarrah

Pack of 4 piece

₹660   ₹1,500

You save ₹840!

56% OFF

Transform your sanding experience with the Sarrah 3000, 5000, 7000, 10000 Grit Silicon Carbide Wet/Dry Waterproof Sand Paper. This premium pack contains 4 Sheets, each measuring 228.6 x 279.4 mm, perfect for achieving a fine finish on various surfaces, including wood, metal, and plastic. Whether you’re polishing or prepping surfaces for painting, this versatile sandpaper is engineered for both wet and dry applications, ensuring optimal performance and longevity. Crafted from high-quality silicon carbide, the Sarrah 3000, 5000, 7000, 10000 Grit Sand Paper offers exceptional durability and cutting power. The 3000, 5000, 7000, 10000 grit provides a smooth, refined finish, making it ideal for the final stages of sanding where precision is key. Its waterproof design not only reduces dust but also allows for a controlled sanding process, minimizing the risk of surface damage. Whether you're a professional contractor or a passionate DIYer, the Sarrah Wet/Dry Sand Paper is an indispensable tool that delivers superior results.

Add to Cart Buy Now

Ships within 3 days

Sarrah 20.5 mm 10000 Grit Polishing Pad (Pack of 1 Pc)

By Sarrah

₹471   ₹999

You save ₹528!

52.85% OFF

Achieve unparalleled precision with the Sarrah 20.5 mm 10000 Grit Polishing Pad, designed for the ultimate high-gloss finish on delicate surfaces. This single-piece polishing pad is perfect for professionals and hobbyists alike, offering an exceptional level of refinement ideal for polishing hard materials such as glass, ceramic, and high-end metals. The ultra-fine 10000 grit ensures that you can achieve a mirror-like shine without the risk of scratching or damaging your workpiece. Engineered for durability and ease of use, the Sarrah Polishing Pad features a compact size of 20.5 mm, making it suitable for detailed polishing tasks and intricate designs. Its high-quality construction allows for efficient heat dissipation, ensuring consistent performance during prolonged use. Compatible with most standard polishers, this pad is an essential tool for anyone looking to elevate their finishing techniques. Transform your polishing experience and enjoy professional-grade results with the Sarrah 20.5 mm 10000 Grit Polishing Pad.

Add to Cart Buy Now

Ships within 3 days

Sarrah 400, 600, 1000, 1500, 2000, 2500, 3000 Grit Silicon Carbide Wet/Dry Waterproof Sand Paper (Pack of 24 Pcs)

By Sarrah

Pack of 24 piece

₹754 - ₹837

The Sarrah Silicon Carbide Wet/Dry Waterproof Sand Paper assortment includes 400, 600, 1000, 1500, 2000, 2500, and 3000 grit sheets designed for progressive surface preparation and fine finishing tasks. Manufactured with high-quality silicon carbide abrasive grains, each sheet delivers sharp cutting action and uniform scratch patterns across different grit levels. The waterproof backing allows effective use in both wet and dry sanding applications, helping to reduce clogging and maintain smooth, controlled abrasion. This assortment supports seamless transitions from surface leveling to ultra-fine finishing.
This pack of 24 wet and dry waterproof sand paper sheets is suitable for sanding metal, wood, plastic, painted surfaces, fiberglass, and automotive finishes. Lower grit sheets assist in material removal and surface preparation, while higher grit options support refined finishing and polishing stages. Wet sanding promotes improved surface smoothness and reduced fine scratches, while dry sanding enables precise control during preparation work. The flexible sheet construction conforms easily to flat and contoured surfaces, ensuring consistent contact and reliable performance across a wide range of finishing applications.

Grit : 400, 600, 1000, 1500, 2000, 2500, 3000

Grit Type : Super Fine

Type of Product : Wet/Dry Waterproof Sand Paper

Pack of : 24 Pcs

Color : Black

Suitable For : Grinding and Polishing

Abrasive Material : Silicon Carbide

Explore other Variants (2)

Ships within 3 days

Sarrah 125 mm (5 Inch) 2000, 3000 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 30 pcs)

By Sarrah

Pack of 20 piece

₹412 - ₹884

You save ₹673!

53.84% OFF

Sarrah 125 mm (5 Inch) 2000, 3000 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 2000, 3000 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (5)

Ships within 3 days

Sarrah Silicon Carbide Wet/Dry Waterproof Sand Paper 280 x 230 mm (Pack of 2 Pcs) (Grit Size 80 to 10000 Grit)

By Sarrah

Pack of 2 piece

₹188 - ₹424

The Sarrah Silicon Carbide Wet/Dry Waterproof Sand Paper in 280 x 230 mm size is engineered for efficient sanding and refined surface finishing across a wide range of materials. Manufactured with high-grade silicon carbide abrasive grains, each sheet delivers sharp cutting performance with uniform scratch patterns. The waterproof backing allows reliable use in both wet and dry sanding applications, helping to minimize clogging while maintaining smooth and consistent abrasion. The 280 x 230 mm sheet size provides ample coverage for manual sanding, supporting controlled handling and even surface contact.
This pack of 2 wet and dry waterproof sand paper sheets is suitable for use on metal, wood, plastic, paint, fiberglass, and automotive surfaces. Wet sanding promotes smoother finishes and cleaner results, while dry sanding enables effective surface preparation and leveling. The flexible sheet construction conforms easily to flat, curved, and irregular surfaces without tearing or cracking. Designed for durability and steady performance, these sand paper sheets are suitable for workshop, automotive, and general finishing applications where consistent surface quality is required.

Size : 280 x 230 mm

Width : 280 mm

Type of Product : Wet/Dry Waterproof Sand Paper

Pack of : 2 Pcs

Suitable For : Wood Furniture Finishing, Metal Sanding, and Automotive Car/Bike Polishing

Length : 230 mm

Abrasive Material : Silicon Carbide

Explore other Variants (10)

Ships within 3 days

Sarrah 150 mm (6 Inch) 40, 60, 80, 120, 150, 180, 240, 320, 400, 800, 1000, 1200, 1500, 2000, 3000 Grit Sanding Disc (Pack of 16 Pcs)

By Sarrah

Pack of 16 piece

₹837  

Elevate your sanding projects to a professional level with the Sarrah 150 mm (6 Inch) Sanding Disc Pack, featuring an extensive range of grits from 40 to 3000. This comprehensive pack of 16 discs is ideal for both professionals and DIY enthusiasts, offering the perfect solutions for a wide variety of sanding applications. Each disc has a 150 mm diameter, making them compatible with most standard sanders for effortless use. Crafted from high-quality abrasive materials, the Sarrah Sanding Discs provide exceptional durability and performance on a multitude of surfaces, including wood, metal, and plastic. The coarser grits (40, 60, 80) are perfect for aggressive material removal, while the medium grits (120, 150, 180, 240) are excellent for surface preparation and smoothing. As you progress to finer grits (320 to 3000), these discs excel in polishing and achieving a flawless finish, making them versatile enough for any sanding task, from heavy-duty work to detailed finishing touches. Upgrade your workshop with the Sarrah 150 mm Sanding Disc Pack and experience the quality and reliability that Sarrah is known for.

Add to Cart Buy Now

Ships within 3 days

Sarrah 125 mm (5 Inch) 180, 240, 320, 400, 600 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 30 pcs)

By Sarrah

Pack of 20 piece

₹353 - ₹884

You save ₹576!

47.06% OFF

Sarrah 125 mm (5 Inch) 180, 240, 320, 400, 600 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 180, 240, 320, 400, 600 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (7)

Ships within 3 days

Sarrah 125 mm (5 Inch) 180 Grit Aluminium Oxide Sanding Disc for Orbital Sander (Pack of 10 to 40 pcs)

By Sarrah

Pack of 40 piece

₹294 - ₹990

You save ₹960!

49.23% OFF

Sarrah 125 mm (5 Inch) 180 Grit Aluminium Oxide Sanding Disc for Orbital Sander is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 180 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (9)

Ships within 3 days

Sarrah 100x15 mm Non Woven Wheel for Angle Grinder (Pack of 2 Pcs) (Grit Size 120 to 800 Grit)

By Sarrah

Pack of 2 piece

₹365 - ₹435

The Sarrah 100x15 mm Non Woven Wheel for Angle Grinder (Pack of 2 Pcs) is designed for surface conditioning, cleaning, and light finishing applications on metal and hard surfaces. Manufactured using high-quality non woven abrasive material, this wheel provides controlled abrasion while maintaining surface integrity. The 100 mm diameter combined with a 15 mm thickness ensures compatibility with standard angle grinders, offering stable rotation and consistent contact during operation. Its open web structure helps prevent clogging and allows uniform material removal, making it suitable for tasks that require smooth and even surface treatment without aggressive grinding.
This non woven wheel is suitable for removing rust, paint, oxidation, weld discoloration, and surface contaminants from steel, stainless steel, aluminum, and similar materials. It also supports blending, deburring, and surface preparation before coating or finishing processes. The flexible abrasive construction adapts well to flat surfaces, edges, and curved profiles, enabling consistent results across different work areas. Designed for durability, the wheel maintains abrasive performance over repeated use while minimizing vibration during operation. Supplied as a pack of two pieces, it offers practical value for workshops, fabrication units, maintenance tasks, and industrial surface finishing applications requiring reliable non woven abrasive performance.

Type of Product : Non Woven Wheel

Thickness : 15 mm

Pack of : 2 Pcs

Suitable For : Industrial

Disc Diameter : 4 Inch

Diameter (mm) : 100 mm

Abrasive Material : Non Woven

Explore other Variants (6)

Ships within 3 days

Sarrah 125 mm (5 Inch) 600, 800 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 40 pcs)

By Sarrah

Pack of 10 piece

₹353 - ₹801

You save ₹412!

51.5% OFF

Sarrah 125 mm (5 Inch) 600, 800 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 600, 800 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (6)

Ships within 3 days

Sarrah 125 mm (5 Inch) 1000 Grit ‎Aluminium Oxide Sanding Disc (Pack of 1 to 30 pcs)

By Sarrah

Pack of 20 piece

₹353 - ₹872

You save ₹588!

49% OFF

Sarrah 125 mm (5 Inch) 1000 Grit ‎Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 1000 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (4)

Ships within 3 days

Sarrah 125 mm (5 Inch) 40, 60, 80, 120, 150 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 30 pcs)

By Sarrah

Pack of 20 piece

₹317 - ₹837

You save ₹509!

46.36% OFF

Sarrah 125 mm (5 Inch) 40, 60, 80, 120, 150 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 40, 60, 80, 120, 150 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (7)

Ships within 3 days

Sarrah 100 Grit Silicon Carbide Wet/Dry Waterproof Sand Paper 280 x 230 mm (Pack of 2 Pcs)

By Sarrah

Pack of 2 piece

₹188   ₹750

You save ₹562!

74.93% OFF

Enhance your sanding capabilities with the Sarrah 100 Grit Silicon Carbide Wet/Dry Waterproof Sand Paper. This practical pack includes 2 sheets, each measuring 280 x 230 mm, specifically designed for both wet and dry applications, making it ideal for various materials such as wood, metal, and plastic. The waterproof feature allows for a cleaner sanding process by reducing dust and debris, ensuring a smoother finish on every project. Constructed from high-quality silicon carbide, the Sarrah Sand Paper offers exceptional durability and performance, particularly in aggressive sanding tasks. The 100 grit is perfect for removing rough edges, paint, or rust, allowing you to prepare surfaces efficiently for finishing. Whether you're a professional tradesperson or a DIY enthusiast, this sandpaper pack provides the reliability and effectiveness needed to achieve superior results. Upgrade your sanding toolkit with the Sarrah 100 Grit Wet/Dry Sand Paper Pack and experience the quality and performance that Sarrah is renowned for. Transform your projects with ease and achieve a flawless finish every time.

Add to Cart Buy Now

Ships within 3 days

Sarrah 125 mm (5 Inch) 80, 120 Grit ‎Aluminium Oxide Sanding Disc (Pack of 10 to 40 pcs)

By Sarrah

Pack of 30 piece

₹306 - ₹754

You save ₹779!

53.72% OFF

Sarrah 125 mm (5 Inch) 80, 120 Grit ‎Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 80, 120 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (7)

Ships within 3 days

Sarrah 125 mm (5 Inch) 40, 60 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 30 pcs)

By Sarrah

Pack of 30 piece

₹306 - ₹671

You save ₹779!

53.72% OFF

Sarrah 125 mm (5 Inch) 40, 60 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 40, 60 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (4)

Ships within 3 days

Sarrah 125 mm (5 Inch) 240, 320 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 40 pcs)

By Sarrah

Pack of 20 piece

₹306 - ₹801

You save ₹329!

32.9% OFF

Sarrah 125 mm (5 Inch) 240, 320 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 240, 320 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (8)

Ships within 3 days

Sarrah 125 mm (5 Inch) 320 Grit Aluminium Oxide Sanding Disc for Orbital Sander (Pack of 1 to 40 pcs)

By Sarrah

Pack of 20 piece

₹294 - ₹990

You save ₹469!

46.95% OFF

Sarrah 125 mm (5 Inch) 320 Grit Aluminium Oxide Sanding Disc for Orbital Sander is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 320 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (10)

Ships within 3 days

Sarrah 125 mm (5 Inch) 600 Grit ‎Aluminium Oxide Sanding Disc for Orbital Sander (Pack of 1 to 30 pcs)

By Sarrah

Pack of 20 piece

₹353 - ₹872

You save ₹588!

49% OFF

Sarrah 125 mm (5 Inch) 600 Grit ‎Aluminium Oxide Sanding Disc for Orbital Sander is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 600 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (5)

Ships within 3 days

Sarrah 125 mm (5 Inch) 400 Grit Aluminium Oxide Sanding Disc for Orbital Sander (Pack of 1 to 30 pcs)

By Sarrah

Pack of 30 piece

₹329 - ₹872

You save ₹928!

51.56% OFF

Sarrah 125 mm (5 Inch) 400 Grit Aluminium Oxide Sanding Disc for Orbital Sander is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 400 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (6)

Ships within 3 days

Sarrah Silicon Carbide Electro Coating Sand Paper Sheet 228.6 x 279.4 mm (Pack of 8 Pcs) (Grit Size 40 to 3000 Grit)

By Sarrah

Pack of 8 piece

₹353 - ₹589

The Sarrah Silicon Carbide Electro Coating Sand Paper Sheet 228.6 x 279.4 mm (Pack of 8 Pcs) is designed for efficient sanding and surface finishing on a wide range of materials. Manufactured using silicon carbide abrasives with electro coating technology, these sheets provide sharp cutting action and consistent grit distribution across the surface. The electro-coated structure helps ensure uniform abrasion and improved durability during sanding operations. With a standard sheet size of 228.6 x 279.4 mm, these sandpaper sheets are suitable for hand sanding as well as use with sanding blocks, offering controlled material removal and smooth surface preparation.
This silicon carbide sand paper sheet is suitable for use on metal, wood, plastic, glass, ceramics, and painted surfaces. The sharp abrasive grains enable effective removal of surface imperfections, scratches, and coatings while supporting even surface texture development. Designed to resist clogging and premature wear, the sheets maintain abrasive performance during repeated use. The flexible backing allows easy handling on flat and contoured surfaces, ensuring consistent sanding results. Supplied in a pack of eight pieces, these sandpaper sheets are suitable for workshops, fabrication units, finishing operations, and maintenance tasks requiring reliable and uniform sanding performance.

Package Contains : Each Grit of 2 Piece

Size : 228.6 x 279.4 mm

Width : 228.6 mm

Type of Product : Sand Paper Sheet

Pack of : 8 Pcs

Suitable For : Grinding and Polishing

Coating : Electro Coating

Length : 279.4 mm

Size (Inch) : 9x11 inch

Explore other Variants (6)

Ships within 3 days

Sarrah Silicon Carbide Abrasive Micron Powder (Grit Size 16 to 3000 Grit)

By Sarrah

₹565 - ₹813

You save ₹422!

42.24% OFF

The Sarrah Silicon Carbide Abrasive Micron Powder (Grit Size 16 to 3000 Grit) is designed for controlled grinding, lapping, and surface finishing of hard and brittle materials. Manufactured from high-purity silicon carbide, this abrasive powder delivers sharp cutting action and consistent particle performance across a wide grit spectrum. The micron-graded structure supports uniform abrasion, allowing accurate material removal and smooth surface development during processing. Its broad grit range makes it suitable for applications that require both aggressive stock removal and fine surface refinement, while maintaining process control and surface consistency.
This silicon carbide micron powder is suitable for use on glass, ceramics, stone, carbide tools, metals, composites, and similar materials. Coarser grits enable effective surface correction and rapid material removal, while finer grits up to 3000 support smoother finishes and preparation for advanced polishing stages. The powder can be used in slurry systems, lapping plates, or mixed with suitable carriers based on application needs. Designed for durability and stable cutting efficiency, it supports reliable performance in laboratories, tool rooms, workshops, and industrial surface finishing environments.

Type of Product : Abrasive Micron Powder

Suitable For : Grinding Non-Ferrous Metals, Ceramics, and Hard Non-Metals

Country of Origin : India

Abrasive Material : Silicon Carbide

Name of Manufacturer/Packer/Importer : Sarrah & Sons

Explore other Variants (11)

Ships within 3 days

Sarrah 100 mm DUPOND Quality Silicon Abrasive Round Wire Brush (Pack of 2 Pcs) (Grit Size 16 to 240 Grit)

By Sarrah

Pack of 2 piece

₹943 - ₹943

You save ₹557!

37.13% OFF

The Sarrah 100 mm DUPOND Quality Silicon Abrasive Round Wire Brush (Pack of 2 Pcs) is designed for efficient surface cleaning, deburring, and controlled abrasion on metal and hard surfaces. Manufactured using DUPOND-quality silicon abrasive filaments, this round wire brush provides consistent cutting action across a wide grit range from 16 to 240. The 100 mm diameter ensures compatibility with standard rotary tools and angle grinders, enabling stable rotation and uniform surface contact. The abrasive-embedded wires deliver effective removal of rust, paint, scale, oxidation, and surface contaminants while maintaining controlled material removal. Its round brush design supports smooth operation on flat surfaces, edges, and curved profiles.
This silicon abrasive round wire brush is suitable for use on steel, stainless steel, aluminum, cast iron, and similar materials. Coarser grit options assist in aggressive cleaning and surface preparation, while finer grits support smoother finishing and surface conditioning. The durable wire construction helps maintain bristle shape and abrasive performance during repeated use. Designed for balanced operation, the brush supports reduced vibration and consistent brushing results. The pack of two pieces offers operational convenience for workshops, fabrication units, and maintenance environments where reliable abrasive brushing and surface preparation are required.

Type of Product : Wire Brush

Suitable For : Granites, Marble, Artifical, Concrete, Natural, Stone

Shape : Round

Abrasive Material : Silicon

Pack of : 2 Pcs

Diameter (mm) : 100 mm

Diameter (Inch) : 4 Inch

Explore other Variants (6)

Ships within 3 days

Sarrah 125 mm (5 Inch) 40, 60, 80, 120, 150, 180 Grit ‎Aluminium Oxide Sanding Disc (Pack of 6 to 30 pcs)

By Sarrah

Pack of 24 piece

₹258 - ₹648

You save ₹273!

32.12% OFF

Sarrah 125 mm (5 Inch) 40, 60, 80, 120, 150, 180 Grit ‎Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 40, 60, 80, 120, 150, 180 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (8)

Ships within 3 days

Sarrah 100 mm (4 Inch) 50-60, 100, 200, 400, 800, 1500, 3000 Grit Polishing Pad (Pack of 7 Pcs)

By Sarrah

Pack of 7 piece

₹612 - ₹801

You save ₹1,198!

59.93% OFF

The Sarrah 100 mm (4 Inch) Diamond Polishing Pad Set (Pack of 7 Pcs) is designed for complete surface finishing across multiple polishing stages on hard materials. This set includes grit sizes 50–60, 100, 200, 400, 800, 1500, and 3000, allowing a structured progression from coarse grinding to fine polishing. Manufactured with industrial-grade diamond abrasives bonded in a durable resin matrix, each pad delivers consistent abrasion and controlled material removal. The standard 100 mm diameter ensures compatibility with commonly used angle grinders and polishing machines, supporting stable operation and uniform surface contact. The flexible pad design adapts to flat and mildly contoured surfaces, enabling smooth polishing during wet applications.
This diamond polishing pad set is suitable for granite, marble, concrete, terrazzo, engineered stone, and similar dense surfaces. Coarser grits assist in surface leveling and scratch removal, while finer grits help refine the surface and enhance smoothness. The balanced construction helps reduce vibration and promotes even wear throughout repeated use. Designed for durability and consistent performance, the pads maintain abrasive efficiency across different polishing stages. The pack of seven pads provides a comprehensive solution for stone fabrication units, workshops, and on-site surface finishing operations.

Type of Product : Polishing Pad

Color : White

Suitable For : Grinding and Polishing

Grit Type : Fine

Diameter (mm) : 100 mm

Diameter (Inch) : 4 Inch

Grit Size : 50-60,100,200,400,800,1500, 3000

Pack of : 7 Pcs

Abrasive Material : Diamond

No. of Holes : 8 Hole

Explore other Variants (2)

Ships within 3 days

Sarrah 125 mm (5 Inch) 220 Grit ‎Aluminium Oxide Sanding Disc (Pack of 25)

By Sarrah

Pack of 25 piece

₹707   ₹1,100

You save ₹393!

35.73% OFF

Achieve a superior finish on your projects with the Sarrah 125 mm (5 Inch) 220 Grit Aluminium Oxide Sanding Disc. Designed for both professionals and DIY enthusiasts, this sanding disc is the ideal tool for fine sanding and polishing tasks across various materials, including wood, metal, and plastic. The 220 grit ensures a smooth, high-gloss finish, making it perfect for final surface preparation before applying paints or finishes. Crafted from high-quality aluminium oxide, the Sarrah Sanding Disc provides excellent durability and consistent performance, allowing you to tackle even the most intricate detailing with ease. Its 125 mm (5-inch) diameter makes it compatible with most standard sanding machines, offering flexibility for your sanding needs. Whether you're working on home improvement projects, automotive refinishing, or woodworking, this sanding disc delivers exceptional results every time. Upgrade your toolkit with the Sarrah 220 Grit Aluminium Oxide Sanding Disc and experience the reliability and quality that Sarrah is renowned for. Elevate your sanding process and achieve professional-quality results with every application.

Add to Cart Buy Now

Ships within 3 days

Sarrah Silicon Carbide Wet/Dry Waterproof Sand Paper 228.6 x 279.4 mm (Pack of 2 Pcs)

By Sarrah

Pack of 2 piece

₹235 - ₹306

The Sarrah Silicon Carbide Wet/Dry Waterproof Sand Paper in 228.6 x 279.4 mm size is designed for precise sanding and consistent surface finishing across a variety of materials. Each sheet is manufactured using high-quality silicon carbide abrasive grains that deliver sharp cutting action and uniform scratch patterns. The waterproof backing supports effective use in both wet and dry sanding applications, helping to reduce clogging while maintaining smooth abrasion. The standard 9 x 11 inch size provides comfortable handling for manual sanding and compatibility with sanding blocks for even pressure distribution.
This pack of 2 wet and dry waterproof sand paper sheets is suitable for sanding metal, wood, plastic, painted surfaces, fiberglass, and automotive components. Wet sanding promotes refined surface finishes and improved smoothness, while dry sanding enables efficient surface preparation and controlled material removal. The flexible sheet design conforms easily to flat, curved, and contoured surfaces without tearing or cracking. With durable construction and dependable abrasive performance, these silicon carbide sand paper sheets are well suited for workshop, automotive, and general finishing applications requiring consistent surface quality.

Size : 228.6 x 279.4 mm

Width : 228.6 mm

Type of Product : Wet/Dry Waterproof Sand Paper

Pack of : 2 Pcs

Suitable For : Grinding and Polishing

Length : 279.4 mm

Abrasive Material : Silicon Carbide

Size (Inch) : 9x11 inch

Explore other Variants (2)

Ships within 3 days

Sarrah 80, 100, 220, 320, 400, 800 1000, 1200, 1500, 2000, 2500, 3000, 5000, 7000, 10000 Grit Silicon Carbide Electro Coating Wet/Dry Waterproof Sand Paper 23 x 90 mm (Pack of 15 Pcs)

By Sarrah

Pack of 15 piece

₹943  

Unlock the potential for exceptional finishes with the Sarrah 80, 100, 220, 320, 400, 800, 1000, 1200, 1500, 2000, 2500, 3000, 5000, 7000, 10000 Grit Silicon Carbide Electro Coating Wet/Dry Waterproof Sand Paper. This extensive pack includes 15 sheets, each measuring 23 x 90 mm, designed to cater to all your sanding needs, from heavy material removal to ultra-fine polishing. Whether you're working with wood, metal, or plastic, this sandpaper ensures a clean and efficient sanding process with minimal dust accumulation. Made from premium silicon carbide, the Sarrah Sand Paper boasts superior durability and versatility. Starting with grits like 80 and 100 for aggressive sanding, you can easily progress through the grits to 320 and 400 for surface preparation, then refine your work with grits up to 10000 for an immaculate finish. Perfect for both professional craftsmen and DIY enthusiasts, this sandpaper pack is your go-to solution for achieving flawless surfaces. Enhance your projects with the Sarrah Wet/Dry Sand Paper and enjoy the remarkable quality that makes every detail shine.

Add to Cart Buy Now

Ships within 3 days

Sarrah 228.6x279.4 mm (9x11 inch) Silicon Carbide Wet & Dry Sandpaper Sheet (Pack of 20) (Grit Size 60 to 3000 Grit)

By Sarrah

Pack of 20 piece

₹589 - ₹990

You save ₹881!

48.94% OFF

The Sarrah 228.6 x 279.4 mm (9 x 11 inch) Silicon Carbide Wet & Dry Sandpaper Sheet is designed for consistent surface finishing across a wide range of materials. Manufactured using high-quality silicon carbide abrasive grains, each sheet delivers sharp cutting performance with uniform scratch patterns. The waterproof backing allows the sandpaper to be used effectively in both wet and dry applications, helping to reduce clogging while maintaining smooth operation. The standard 9 x 11 inch size ensures compatibility with hand sanding blocks and manual applications, making it suitable for controlled and precise sanding tasks.
This pack of 20 wet and dry sandpaper sheets is ideal for use on metal, wood, plastic, fiberglass, paint, and automotive surfaces. Silicon carbide construction provides durability and sustained abrasion, even during extended use on hard or coated surfaces. When used wet, the sheets support cleaner sanding results and improved surface refinement, while dry use allows efficient material removal. The flexible sheet design conforms easily to curved and uneven surfaces, supporting uniform finishing in detailed or flat work areas. These sandpaper sheets are suitable for workshop, automotive, and industrial finishing applications where reliable performance and surface consistency are required.

Product Dimensions : ‎28x22 cm

Type : Wet & Dry

Size : 228.6x279.4 mm (9x11 inch)

Width : 22.86 cm

Material : Silicon Carbide

Type of Product : Sandpaper Sheet

Pack of : 20 Piece

Backing Type : ‎Paper

Length : 27.94 cm

Explore other Variants (14)

Ships within 3 days

Sarrah 228.6x279.4 mm (9x11 inch) High Grit ‎Metal, Silicon Carbide Wet & Dry Assortment Sandpaper Sheet (Pack of 10) (Grit Size 3000 to 7000 Grit)

By Sarrah

Pack of 10 piece

₹671 - ₹1,025

You save ₹879!

56.71% OFF

The Sarrah 228.6 x 279.4 mm (9 x 11 inch) High Grit Metal, Silicon Carbide Wet & Dry Assortment Sandpaper Sheet is designed for precision finishing and surface refinement on hard and coated materials. Manufactured with high-quality silicon carbide abrasive grains, each sheet delivers sharp and consistent cutting action suited for high-grit applications. The wet and dry compatible construction allows flexible use in different sanding conditions, helping reduce clogging while maintaining smooth abrasion. The standard 9 x 11 inch size supports comfortable hand sanding and uniform surface contact during detailed finishing work.
This pack of 10 assorted high-grit sandpaper sheets is suitable for use on metal, paint, plastic, fiberglass, and automotive surfaces where fine finishing is required. Wet sanding enables improved surface smoothness and controlled scratch patterns, while dry sanding supports precise surface leveling. The flexible sheet structure adapts easily to flat and contoured surfaces, ensuring even abrasion without tearing. Designed for reliable performance and consistent finish quality, these silicon carbide sandpaper sheets are suitable for workshop, automotive, and precision finishing applications requiring refined surface results.

Compatible Material : ‎Wood, Plastic, Metal

Product Dimensions : ‎23x28 cm

Type : Wet & Dry

Size : 228.6x279.4 mm (9x11 inch)

Width : 22.86 cm

Compatible Device : ‎Sanding Block

Type of Product : Sandpaper Sheet

Pack of : 10 Piece

Backing Type : ‎Paper

Length : 27.94 cm

Explore other Variants (5)

Ships within 3 days

Sarrah 125 mm 40, 60, 80, 120, 240, 320, 400, 600, 800, 1000, 1200, 1500, 2000 & 3000 Grit 8 Holes ‎Aluminium Oxide Sanding Disc

By Sarrah

Pack of 28 piece

₹530 - ₹730

You save ₹770!

51.33% OFF

Sarrah 125 mm 40, 60, 80, 120, 240, 320, 400, 600, 800, 1000, 1200, 1500, 2000 & 3000 Grit 8 Holes ‎Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 40, 60, 80, 120, 240, 320, 400, 600, 800, 1000, 1200, 1500, 2000 & 3000 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (2)

Ships within 3 days

Sarrah 100 mm (4 Inch) Diamond Polishing Pad (Grit Size 0 to 150 Grit)

By Sarrah

Pack of 5 piece

₹376 - ₹1,037

You save ₹344!

47.78% OFF

The Sarrah 100 mm (4 Inch) Diamond Polishing Pad is designed for precision surface finishing on hard materials where consistent polishing performance is required. Manufactured with high-quality industrial-grade diamond abrasives, this pad delivers controlled material removal and smooth surface refinement. The 100 mm diameter makes it suitable for compact polishing machines, angle grinders, and handheld tools commonly used in stone processing and surface finishing applications. Its flexible construction allows the pad to adapt to flat and mildly contoured surfaces, ensuring uniform contact during operation. The pad is engineered for wet polishing use, helping reduce heat generation while enhancing surface clarity and finish quality.
This diamond polishing pad is suitable for polishing granite, marble, engineered stone, concrete, and other dense surfaces. The resin-bonded diamond segments are evenly distributed to maintain stable polishing action throughout use. Designed for durability, the pad maintains performance across multiple polishing stages without compromising surface smoothness. The standard 4-inch size allows easy integration into existing tool setups, making it practical for workshops, fabrication units, and on-site finishing tasks. Its balanced design supports steady rotation, reducing vibration and improving control during polishing operations.

Type of Product : Diamond Polishing Pad

Compatible Material : Glass, Ceramic, Concrete, Marble, Stone, Granite

Diameter (mm) : 100 mm

Diameter (Inch) : 4 Inch

Explore other Variants (23)

Ships within 3 days

Sarrah 125 mm (5 Inch) 400, 600 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 40 pcs)

By Sarrah

Pack of 30 piece

₹353 - ₹896

You save ₹949!

54.23% OFF

Sarrah 125 mm (5 Inch) 400, 600 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 400, 600 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (8)

Ships within 3 days

Sarrah 125 mm (5 Inch) 3000, 5000, 7000 Grit Aluminium Oxide Sanding Disc (Pack of 3 to 12 pcs)

By Sarrah

Pack of 6 piece

₹306 - ₹943

You save ₹479!

45.88% OFF

Sarrah 125 mm (5 Inch) 3000, 5000, 7000 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 3000, 5000, 7000 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (11)

Ships within 3 days

Sarrah 125 mm (5 Inch) 400, 600, 800 Grit ‎Zirconia Alumina Sanding Disc (Pack of 12 Pcs)

By Sarrah

Pack of 12 piece

₹353  

The Sarrah 125 mm (5 Inch) 400, 600, 800 Grit Zirconia Alumina Sanding Disc is designed to deliver smooth and precise sanding for various materials. Crafted with high-quality Zirconia Alumina, these discs are excellent for fast material removal and fine surface finishing on wood, metal, and plastic. The 400, 600, 800 grit level is ideal for medium-level sanding tasks, such as prepping surfaces, smoothing rough edges, or creating an even finish. Each disc is engineered to offer strong durability and consistent performance, while the 5-inch size makes it versatile for most standard orbital sanders. Perfect for both professional and DIY applications, this pack of 12 Pcs sanding discs offers reliable quality and ample supply for tackling multiple projects. Whether refinishing furniture or preparing surfaces for painting, the Sarrah 125 mm 400, 600, 800 Grit Sanding Disc pack helps you achieve professional-quality results with ease.

Add to Cart Buy Now

Ships within 3 days

Sarrah 125 mm (5 Inch) 1500, 2000 Grit Aluminium Oxide Sanding Disc (Pack of 10 to 40 pcs)

By Sarrah

Pack of 10 piece

₹494 - ₹884

You save ₹406!

45.11% OFF

Sarrah 125 mm (5 Inch) 1500, 2000 Grit Aluminium Oxide Sanding Disc is a 125 mm (5 inch) aluminium oxide sanding disc designed for consistent surface preparation across metal, wood, automotive panels, composites, and painted surfaces. The aluminium oxide abrasive delivers controlled cutting action with reliable wear resistance, helping maintain uniform scratch patterns throughout use. The 125 mm diameter ensures stable contact and balanced operation on compatible angle grinders and random orbital sanders. This disc is engineered to support tasks such as stock removal, surface leveling, edge blending, weld smoothing, and intermediate sanding, depending on the selected grit combination. Its construction promotes even pressure distribution, reduced clogging, and steady material removal for predictable finishing results.
Built for both dry sanding and progressive finishing workflows, this sanding disc supports smooth transitions between surface preparation stages. The abrasive structure helps achieve clean, consistent finishes while minimizing surface damage and uneven marks. Suitable for workshop, fabrication, maintenance, and finishing applications, the disc performs effectively in controlled grinding, deburring, and surface refinement operations. The aluminium oxide grain composition contributes to durability and steady performance across repeated use cycles. With its standardized 125 mm format and clearly defined grit configuration, this sanding disc integrates seamlessly into professional and industrial sanding processes where accuracy, surface control, and finish quality are essential.

Ideal For : Grinding and Polishing

Shape : Round

Type of Product : Sanding Disc

Grit Size : 1500, 2000 Grit

Diameter (mm) : 125 mm

Diameter (Inch) : 5 Inch

Explore other Variants (5)

Ships within 3 days

Sarrah 150 mm (6 Inch) 400, 800 Grit ‎Emery Sanding Disc (Pack of 20 Pcs)

By Sarrah

Pack of 20 piece

₹813   ₹1,200

You save ₹387!

32.25% OFF

The Sarrah 150 mm (6 Inch) Emery Sanding Disc pack provides 400 and 800 grit discs designed for fine to ultra-fine finishing on surfaces like metal, wood, and plastic. With high-quality emery abrasive, these discs offer superior consistency, ideal for achieving smooth, refined surfaces, and polishing tasks that require attention to detail. This pack of 20 includes both 400 and 800 grit options, perfect for light sanding, finishing, and preparation for coatings or paint. These 6-inch discs are compatible with most orbital and DA sanders, making them a versatile choice for professional and DIY finishing projects. Enhance your work with Sarrah’s durable emery discs, engineered for precision and high-quality results in detailed applications.

Add to Cart Buy Now

Previous Next

Page 1 of 4 results