Filter

Categories
Price Range
Min Price:
Max Price:
-
Discount

Supco Products Online

Showing 6 out of 6 products

Sort by
₹23,599  
Supco presents Digital Vacuum Gauge - VG64. The Digital Vacuum Gauge was designed to be used at home. It can be used on a car, and also has other uses. The digital vacuum gauge can be used to check the air pressure in your car tires. It is simple to use and easy to understand. The digital vacuum gauge works by measuring the pressure of the air around it. If the vacuum is lower than the atmospheric pressure, it will read low on the gauge. If the vacuum is higher than atmospheric pressure, it will read high on the gauge. When you use it on your car tires, you want to make sure that your tires have about 30 pounds per square inch (PSI) of air pressure in them for maximum fuel efficiency and tire life. If a tire is letting out more than 30 PSI of air, then you want to add more air into it until you reach 30 PSI. To do this, take off the valve cap from one of your tires, and insert the end of the hose onto it until it stops completely. Then start pumping and watch as the gauge rises until it reaches 30 PSI. This is not hard to do at all!
A vacuum gauge is a device that measures the pressure, or that pressure below atmosphere. Usually, it's used to measure the vacuum pressure inside a container. The vacuum gauge has a series of colored bands on the glass tube. These bands mark specific ranges of pressures; however, the meaning of these ranges may vary slightly depending on who made the gauge and the pressure standards they used.
Vacuum gauges are used in industrial settings and can be found in many different types of equipment, such as compressors or refrigerators. They're also used in high-end scientific equipment, such as spectrometers or mass spectrometers. They're typically made from glass because it's easy to read and it can withstand high temperatures without becoming deformed. This allows researchers and scientists to use them for all sorts of testing procedures, including vacuum distillation and high-temperature processing.
₹33,039  
Supco presents Temperature & Humidity Logger - VLTH230. The Supco Temperature & Humidity Logger - VLTH230 is a stylish and easy to use device that makes it simple to monitor the temperature and humidity of your home. Monitoring your home's climate can help you keep an eye on its energy efficiency and avoid conditions that can lead to mold, mildew, and other problems. The VLTH230 has a large display with a very intuitive interface. It's completely programmable, meaning you can have it alert you when the temperature rises above or falls below your desired range. The VLTH230 includes an automatic power-off feature that prevents battery drain if you forget to turn it off. It also supports a maximum of four channels for additional sensors for monitoring multiple variables in one location. The Supco VLTH230 is designed for indoor use only and should be placed in an area where it will remain undisturbed during the duration of its use (at least six months).
The Supco Temperature and Humidity Logger VLTH230 is a reliable tool for monitoring the temperature and humidity levels in your home or office. It can be used to monitor a wide variety of settings, including homes, offices, storage units, basements, and more. The device records the daily high and low temperatures and humidity readings, as well as the current temperature and humidity level. The digital display shows you all this information at a glance so that you can easily check the levels at any time. The Supco Temperature and Humidity Logger also comes with two sensors: one for temperature readings, which records temperatures from -40 degrees to 140 degrees Fahrenheit (-40 degrees to 60 degrees Celsius), and one for humidity readings, which records relative humidity levels from 20 percent to 95 percent.
₹29,499  
Supco presents Temperature and Humidity Thermometer - EM10. Smart homes are all the rage, but what about homes that aren't smart yet? One of the most overlooked features of a smart home is the ability to monitor temperature and humidity. If you're looking for an easy way to monitor temperature and humidity, the Supco Temperature and Humidity Thermometer - EM10 may be your solution. This thermometer is simple to set up and easy to use. It comes with a suction cup that makes it easy to place on any window so that you can get accurate readings without having to worry about drilling holes in walls or putting holes in tiny spaces. The thermometer measures both inside and outside temperature, has a large display screen with big numbers, and works on either battery power or AC power.
The Supco EM10 temperature and humidity thermometer is great for quick checks of indoor conditions and can be easily wall-mounted for added convenience. It allows users to set a desired target temperature and displays the current temperature in either Fahrenheit or Celsius, along with the relative humidity. This makes it a great tool for both home and industrial uses. Note that this thermometer does not include mercury or alcohol, but does come with an extra battery.
This thermometer also has many other features including a 24-hour memory recall with date and time stamping, indoor/outdoor temperature reading with auto switch, 12/24 hour clock time format option, low battery indicator, and max/min high/low memory recall with date and time stamping. The thermometer comes with a one-year limited warranty that covers defects in material or workmanship.
₹36,579  
Supco presents Anemometer - EM20. Sometimes, we need a little help with our weather. The Supco® Anemometer - EM20 is just the tool to give you an idea of the speed of the wind around your home or office. This particular model gives readings in miles per hour, miles per hour and kilometers per hour, or kilometers per hour. It has a range of 5 to 40, which is far more than adequate for most people's needs.
The Supco® Anemometer - EM20 also features easy-to-read red and white markings on its face. You can tell at a glance how fast the wind is blowing at your location. It's lightweight and portable too, so you can take it with you anywhere you want to measure wind speed.
This anemometer measures in five different directions: left to right, front to back, up and down, and diagonally. That gives it a lot of versatility, so you'll have plenty of choices for where to put it up if you're in search of accurate readings. A single AA battery powers this small device for about six months before replacement is necessary.
The Supco EM20 is a small anemometer that can measure wind speed from 0 to 40 MPH. I bought it for my mom as a Christmas present. Not only does she want to know the temperature and humidity, but she also likes to keep track of how fast the wind is blowing. This little device will help her do just that. The Supco EM20 comes in a sturdy gray plastic case, with a cream-colored faceplate and some simple numbers. It has a gauge on the faceplate that measures the wind speed and another gauge that measures the temperature. It comes with a 9V battery already installed, so you just have to attach it to something and you're ready to go!
₹1,29,799  
Supco presents Sound Level Meter - EM80. Sales for the Supco Sound Level Meter - EM80 have been strong, with increasing demand from a variety of industries. The meter has been used for applications in a variety of settings:
The most frequent use case is for construction noise monitoring. Workers are often required to wear ear protection devices in areas where noise levels exceed 85 decibels, and the Supco Sound Level Meter - EM80 can be used to test whether this requirement is being met. Like many field-ready meters, the instrument comes with a mounting bracket and lanyard, and some customers have found that these features allow the measurements to be taken with minimal inconvenience to workers in relation to other competing products.
The Supco Sound Level Meter - EM80 has also seen widespread adoption in data centers, where it can be used for both ongoing noise monitoring as well as troubleshooting. Because of the meters' durability and portability, they're easy to keep around on-site even after installation, which makes them convenient for use whenever an issue arises. In some cases, they've even been used to monitor equipment before installation, so that issues can be avoided by making adjustments during production.
The Supco Sound Level Meter - EM80 is designed to be a handheld digital sound level meter that measures, displays, and stores the decibels (dB) of sound. It is great for helping you determine sound levels when designing new buildings, apartments, or homes; it can help you choose the right components for your home theater system, or it can be used to help ensure that noise levels in industrial facilities are safe and within government standards. This product is also useful in measuring the noise levels of loud machinery such as lawnmowers, leaf blowers, and weed eaters.
Recommended Items
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
Browsing History
sku-leadTime Ships within 5 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 11 days
oos-available Ships within 24 hrs
sku-leadTime Ships within 6 days
₹44,099 ₹54,600
19.23% OFF

Top Selling Supco Products Online Products Price List for December 2025

Product Name Specifications Expected Price Dispatch Time Discount
Supco Digital Vacuum Gauge - VG64 Accuracy +/- 10% (100-2000 microns) | Connector Type Standard 6.35 mm male flared fitting ₹23,599 4 days --
This data was last updated on 13/12/2025