Order TECHDELIVERS Online in India at Best Prices

The TECHDELIVERS Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making - 500 g, also known as etchant or etching solution, is a chemical substance used in the process of creating printed circuit boards (PCBs). PCB etching is a method of removing unwanted copper from the surface of a copper-clad PCB substrate to create circuit traces, pads, and other conductive features. PCB Etching Powder: Chemical Composition: PCB etching powder typically consists of a mixture of chemicals that can dissolve or react with copper, effectively etching away the unwanted copper from the substrate. Selective Etching: The etchant selectively removes copper while leaving behind the protective mask that defines the circuit pattern. This allows for precise creation of conductive pathways on the PCB. Etching Process: The PCB is coated with a resist material (such as photoresist) that protects the areas where the circuit traces and pads are intended. The PCB is then submerged or brushed with the etching solution. The etchant removes copper from the exposed areas, leaving the desired circuit pattern. Safety Considerations: PCB etching solutions can contain corrosive and potentially harmful chemicals. Proper safety precautions, such as wearing protective gear and working in a well-ventilated area, are essential when using etchants. Common Types of PCB Etching Solutions: Ferric Chloride (FeCl3): One of the most common etchants, ferric chloride is corrosive and reacts with copper to dissolve it. Cupric Chloride (CuCl2): Cupric chloride is used as an alternative to ferric chloride and offers faster etching times. Ammonium Persulfate (NH4)2S2O8): This etchant is less corrosive compared to ferric chloride and is often used for more delicate applications. Sodium Persulfate (Na2S2O8): Similar to ammonium persulfate, sodium persulfate is a milder etchant suitable for fine-pitch traces and sensitive components. Using PCB Etching Powder: Prepare the PCB: Apply a resist material (photoresist, for example) to the PCB surface. The resist protects the areas you want to keep. Expose the Circuit Pattern: Expose the resist to light or use other methods to create the desired circuit pattern. Develop the Resist: Develop the exposed resist to remove unwanted portions, leaving the circuit pattern intact. Etching: Submerge the PCB in the etching solution. Agitate or brush the solution over the surface to speed up the process. Rinse and Neutralize: Once the desired copper has been etched away, rinse the PCB thoroughly with water to remove any remaining etchant. Neutralize the etchant to make it safe for disposal. Remove the Resist: Strip the remaining resist material from the PCB using appropriate methods.

Product Name	Expected Price	Dispatch Time	Discount
Invento 10pcs EN31 Rustproof Steel Smooth Rod 4 mm OD Length 200 mm (0.2 m), ISC 1930-2C	₹1,297	6 days	--
JFLO Polyamide Nylon R38 Non Opening 15x20 mm Drag Chain Black, 15 X 20 X R 38 B (Length of 10 m)	₹9,090	32 days	--
Invento ISC 235 Small Loudspeaker Stereo Audio Speaker 2040 4Ohm 2W for Laptop DIY Projects Replace	₹353	24 hrs	40.17% OFF
Invento 20dBm Radio Telemetry Kit ISC 184-X	₹4,601	7 days	24.42% OFF
Invento ISC 232 9mm Noise Suppressor Emi Rfi Clip Choke Ferrite Core Cable Filter Black JG	₹530	6 days	--

TECHDELIVERS Robot Parts and Accessories

Top Selling TECHDELIVERS Robot Parts and Accessories Products Price List for May 2026