Have a question? Call us now at +91 9650660070

TECHDELIVERS Industrial Automation

Showing 26 out of 26 products

Sort by

TECHDELIVERS Led Bulb 9 W 12 V DC White with inbuilt Heatsink Plate (Pack of 2), 1117ZCXX88I

Ships within 24 hrs

TECHDELIVERS Led Bulb 9 W 12 V DC White with inbuilt Heatsink Plate (Pack of 2), 1117ZCXX88I

By TECHDELIVERS

Pack of 2 piece

₹152 ~~₹370~~

You save ₹218!

58.92% OFF

The TECHDELIVERS Led Bulb 9 W 12 V DC White color with inbuilt Heatsink Plate for Battery Solar Panel (Pack of 2) is semiconductor devices that emit light when an electric current passes through them. LED lights are known for their energy efficiency, long lifespan, and versatility, making them widely used in various lighting applications. Key features and characteristics of LED lights include: 1. Energy Efficiency: LED lights are highly energy-efficient, converting a higher percentage of electrical energy into visible light compared to traditional incandescent or fluorescent lights. 2. Long Lifespan: LEDs have a significantly longer lifespan than traditional lighting sources, reducing the need for frequent replacements. 3. Instant On/Off: LED lights reach full brightness instantly when powered on, with no warm-up time required. They also switch off instantly without any delay. 4. Directional Light: LEDs emit light in a specific direction, making them suitable for applications where focused illumination is desired. 5. Low Heat Generation: LED lights produce very little heat, contributing to their energy efficiency and reducing the risk of burns or fire hazards. 6. Color Options: LED lights are available in a wide range of colors, including warm white, cool white, red, green, blue, and various other colors. LED lights have revolutionized the lighting industry with their energy-saving capabilities and versatility. They are used in various applications, including residential lighting, commercial lighting, automotive lighting, signage, displays, and more. As LED technology continues to advance, LED lights are becoming even more efficient and cost-effective, making them the preferred choice for lighting solutions worldwide.

TECHDELIVERS Square Metal Gear Box Motor 200 rpm 12 V DC High Torque

Ships within 24 hrs

TECHDELIVERS Square Metal Gear Box Motor 12 V DC High Torque

By TECHDELIVERS

₹2,241 - ₹2,359

You save ₹640!

21.34% OFF

The TECHDELIVERS Square Metal Gear Box Motor is a powerful and versatile motor designed for various mechanical and robotics projects. Operating at 12 volts DC, this motor delivers high torque output, making it suitable for applications that require robust and reliable performance.One of the key features of this motor is its square metal gear box, which provides durability and strength to withstand heavy loads and mechanical stresses. The metal gears ensure smooth and efficient power transmission, enhancing the motor's overall performance and longevity.With its high torque output, the TECHDELIVERS Square Metal Gear Box Motor is capable of driving mechanisms and moving parts with ease, making it ideal for applications such as robotics, automation, electric vehicles, and more. Whether you're building a robot arm, a conveyor system, or a remote-controlled vehicle, this motor provides the necessary power and reliability to bring your project to life.Despite its powerful performance, this motor is designed to operate quietly and efficiently, minimizing noise and energy consumption. This makes it suitable for indoor and outdoor applications where noise levels and energy efficiency are important considerations.Installation of the TECHDELIVERS Square Metal Gear Box Motor is straightforward, with mounting holes and shafts for easy integration into your project. Its compact size and versatile design make it suitable for a wide range of applications, from hobbyist projects to commercial and industrial uses.In summary, the TECHDELIVERS Square Metal Gear Box Motor offers high torque output, durability, and efficiency in a compact and versatile package. Whether used for robotics, automation, or other mechanical applications, this motor provides reliable performance and power to drive your projects forward.

Type of Product : Square Metal Geared Box Motor

Stall Torque : 40.3 kg-cm @ 12 V DC

Material : Metal

Shaft Diameter : 8 mm

Shaft Length : 25 to 30 mm approx

TECHDELIVERS FTDI FT232RL FT232 USB to UART TTL Serial Adapter Module with Mini USB Cable

Ships within 24 hrs

TECHDELIVERS FTDI FT232RL FT232 USB to UART TTL Serial Adapter Module with Mini USB Cable

By TECHDELIVERS

₹341 ~~₹699~~

You save ₹358!

51.22% OFF

The TECHDELIVERS FTDI FT232RL FT232 USB to UART TTL Serial Adapter Module with Mini USB Cable is refers to a device or component that includes an adapter module along with a Mini USB cable. Let's break down what each part of this phrase means: 1. Adapter Module: An adapter module is a piece of hardware that is designed to enable compatibility between different devices or components that might not naturally work together due to differences in interfaces, voltages, or other technical specifications. It's often used to convert signals or power sources from one form to another. 2. Mini USB Cable: A Mini USB cable is a type of cable that has a Mini USB connector on one end and typically a USB Type-A connector on the other end. Mini USB connectors were used in the past to connect various devices like cameras, MP3 players, older smartphones, and other electronics to computers or power sources. The combination of an "Adapter Module with Mini USB Cable" suggests that the adapter module is likely facilitating a connection or conversion between devices that use Mini USB connectors and other devices that use different types of connectors or require different power specifications. This kind of setup could be used to connect an older device with a Mini USB port to a newer computer or charger with a USB Type-C port. The adapter module could handle the necessary signal conversion or voltage regulation to ensure proper communication or power supply between the devices. It's worth noting that Mini USB connectors have become less common in recent years, with many devices transitioning to micro USB or USB Type-C connectors due to their improved durability and data transfer capabilities. As a result, adapters and cables like the one you mentioned might be less prevalent in modern setups.

TECHDELIVERS Copper Clad Board Size 12 X 12 inch 40 Microns for PCB making Single Sided, Phenolic

Ships within 24 hrs

TECHDELIVERS Copper Clad Board for PCB making Single Sided, Phenolic

By TECHDELIVERS

₹258 - ₹258

You save ₹1,741!

87.09% OFF

The TECHDELIVERS Copper Clad Board for PCB making is a single-sided phenolic board specifically designed for creating custom printed circuit boards (PCBs) in electronic projects. This type of board is commonly used by hobbyists, electronics enthusiasts, and professionals who need a reliable substrate for assembling and soldering electronic components.The key feature of the TECHDELIVERS Copper Clad Board is its construction using a phenolic resin substrate with a thin layer of copper laminated onto one side. The copper layer serves as the conductive trace material for creating circuit pathways, while the phenolic substrate provides structural support and insulation between the copper traces.One of the advantages of using a single-sided copper clad board is its simplicity and affordability, making it ideal for prototyping and small-scale projects. The single-sided design means that components and traces are only soldered onto one side of the board, simplifying the assembly process and reducing complexity.The copper layer on the board is typically pre-etched with a copper pattern or grid, providing a template for creating custom circuit designs. Users can use etching techniques such as chemical etching or mechanical milling to remove unwanted copper and create the desired circuit layout.The TECHDELIVERS Copper Clad Board is also designed with convenience in mind. It comes in standard sizes and thicknesses, making it compatible with common PCB design software and fabrication techniques. This standardization ensures compatibility with drill sizes, component placements, and soldering processes.

Suitable For : PCB making Single Sided

Type of Product : Copper Clad Board

Material : Phenolic

Care Instructions : Always use mask while cutting PCBs

Related Searches

techdelivers geared dc motors

techdelivers battery and its accessories

TECHDELIVERS 500 g Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making

By TECHDELIVERS

₹282 ~~₹559~~

You save ₹277!

49.55% OFF

The TECHDELIVERS Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making - 500 g, also known as etchant or etching solution, is a chemical substance used in the process of creating printed circuit boards (PCBs). PCB etching is a method of removing unwanted copper from the surface of a copper-clad PCB substrate to create circuit traces, pads, and other conductive features. PCB Etching Powder: Chemical Composition: PCB etching powder typically consists of a mixture of chemicals that can dissolve or react with copper, effectively etching away the unwanted copper from the substrate. Selective Etching: The etchant selectively removes copper while leaving behind the protective mask that defines the circuit pattern. This allows for precise creation of conductive pathways on the PCB. Etching Process: The PCB is coated with a resist material (such as photoresist) that protects the areas where the circuit traces and pads are intended. The PCB is then submerged or brushed with the etching solution. The etchant removes copper from the exposed areas, leaving the desired circuit pattern. Safety Considerations: PCB etching solutions can contain corrosive and potentially harmful chemicals. Proper safety precautions, such as wearing protective gear and working in a well-ventilated area, are essential when using etchants. Common Types of PCB Etching Solutions: Ferric Chloride (FeCl3): One of the most common etchants, ferric chloride is corrosive and reacts with copper to dissolve it. Cupric Chloride (CuCl2): Cupric chloride is used as an alternative to ferric chloride and offers faster etching times. Ammonium Persulfate (NH4)2S2O8): This etchant is less corrosive compared to ferric chloride and is often used for more delicate applications. Sodium Persulfate (Na2S2O8): Similar to ammonium persulfate, sodium persulfate is a milder etchant suitable for fine-pitch traces and sensitive components. Using PCB Etching Powder: Prepare the PCB: Apply a resist material (photoresist, for example) to the PCB surface. The resist protects the areas you want to keep. Expose the Circuit Pattern: Expose the resist to light or use other methods to create the desired circuit pattern. Develop the Resist: Develop the exposed resist to remove unwanted portions, leaving the circuit pattern intact. Etching: Submerge the PCB in the etching solution. Agitate or brush the solution over the surface to speed up the process. Rinse and Neutralize: Once the desired copper has been etched away, rinse the PCB thoroughly with water to remove any remaining etchant. Neutralize the etchant to make it safe for disposal. Remove the Resist: Strip the remaining resist material from the PCB using appropriate methods.

TECHDELIVERS USB 2.0 A to Mini 5 pin B Cable Length 35 cm for External HDDS/Camera/Card Readers

Ships within 24 hrs

TECHDELIVERS Male-to-Male USB Cable for Multiple Device

By TECHDELIVERS

₹113 - ₹188

You save ₹246!

68.52% OFF

The TECHDELIVERS Male-to-Male USB Cable is a versatile and essential accessory designed for connecting multiple devices. This cable features USB Type-A male connectors on both ends, making it suitable for a wide range of applications such as data transfer, device charging, and peripheral connectivity. It is commonly used to connect USB devices like external hard drives, printers, cameras, and other peripherals to computers, laptops, or USB hubs. The cable is designed to support high-speed data transfer rates, ensuring efficient and quick transmission of data between devices. Its robust construction ensures durability and reliable performance, while the flexible cable design allows for easy handling and installation. The TECHDELIVERS Male-to-Male USB Cable is compatible with USB 1.0, 1.1, and 2.0 standards, providing broad compatibility with a wide range of devices. This makes it a practical choice for both personal and professional use, ensuring seamless connectivity and efficient operation for various electronic devices.

Type of Product : USB Cable

Connector Gender : Male-to-Male

Cable Type : USB

Country of Origin : India

Name of Manufacturer/Packer/Importer : TD RETAIL

TECHDELIVERS 3.7V 2000mAh 18650 Rechargeable Lithium Ion Battery Cell TD-BAT3V72A0

Ships within 24 hrs

TECHDELIVERS 3.7 V Cylindrical Type Lithium Ion Rechargeable Battery

By TECHDELIVERS

₹113 - ₹412

You save ₹1,086!

90.58% OFF

The TECHDELIVERS 3.7 V Cylindrical Type Lithium-Ion Rechargeable Battery is a high-performance battery designed for a variety of electronic applications. With a nominal voltage of 3.7 volts, this lithium-ion battery offers a reliable power source for devices requiring moderate to high energy density. Its cylindrical form factor makes it suitable for compact and portable applications, where space and weight are important considerations. This rechargeable battery provides a long cycle life, meaning it can be charged and discharged many times without significant loss of capacity. It is typically used in consumer electronics, power tools, and portable devices. The battery features built-in protection circuits to prevent overcharging, over-discharging, and short-circuiting, ensuring safe and reliable operation. Its high energy density and stable voltage output make it an excellent choice for various electronic projects and products, providing efficient and long-lasting power.

Battery Type : Lithium Ion Battery

Type of Product : Rechargeable Battery

Shape : Cylindrical

Application : Flashlight, Hobby Transmitters, Receiver

Voltage : 3.7 V

TECHDELIVERS BestPriceEver Silver 12 V 1 A Big DC Motor High Torgue 5000 RPM RS-555

Ships within 24 hrs

TECHDELIVERS BestPriceEver Silver 12 V 1 A Big DC Motor High Torgue 5000 RPM RS-555

By TECHDELIVERS

₹176

The TECHDELIVERS BestPriceEver Silver 12 V 1 A Big DC Motor High Torgue 5000 RPM RS-555, short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

TECHDELIVERS Resistance Kit Box all 41 Value type Carbon film Resistors Kit 1/4 W (Pack of 250)

Ships within 24 hrs

TECHDELIVERS Resistors Kit 41 values Set Box 1/4 W Carbon Film Resistance Kit

By TECHDELIVERS

Pack of 250 piece

₹270 - ₹270

You save ₹100!

27.03% OFF

The TECHDELIVERS Resistors Kit is a comprehensive set of carbon film resistors, organized in a convenient box, designed to provide hobbyists, students, and electronics enthusiasts with a wide range of resistance values for their projects. Here are some key features and details about this kit:1. **41 Values**: The kit contains resistors in 41 different standard resistance values. These values cover a broad range of resistances commonly used in electronic circuits, from low to high values.2. **Carbon Film Resistors**: The resistors included in the kit are carbon film resistors. Carbon film resistors are widely used in electronic circuits due to their stability, accuracy, and low cost. They are suitable for general-purpose applications and are commonly used in various electronic devices.3. **1/4 W Power Rating**: The resistors in the kit have a power rating of 1/4 watt. This power rating indicates the maximum amount of power the resistors can dissipate without overheating or damage. It is suitable for most low to moderate power applications in hobbyist and educational projects.4. **Organization**: The resistors are neatly organized in a box with labeled compartments for each resistance value. This organization makes it easy to locate and access the desired resistor when working on a project, helping to save time and effort.5. **Versatility**: With a wide range of resistance values available in the kit, users can easily find the right resistor for their specific circuit requirements. Whether it's for voltage dividers, current limiting, or other applications, having a variety of resistance values on hand allows for greater flexibility and experimentation in electronic projects.Overall, the TECHDELIVERS Resistors Kit provides a convenient and versatile assortment of carbon film resistors, making it an essential tool for electronics hobbyists, students, and professionals working on a wide range of projects.

Power Rating : 0.25 W

Tolerance : ±5%

Color : Multi

Country of Origin : India

Range : 100 Ω upto 2 mΩ

Impedance : Values: (in ohm)100E,220E,330E,470E,560E,680E,820E,1K,1K2,1K8,2K2,2K7,3K3,3K9,4K7,5K6,6K8,8K2,10K,12K,15K,18K,22K,27K,33K,39K,47K,56K,68K,82K,100K,120K,150K,180K,220K,270K,330K,390K,470K,1M,2M.

Used For : Reduce current flow

TECHDELIVERS 12V DC Brushless Cooling Fan (3 inch by 3 inch)

Ships within 24 hrs

TECHDELIVERS 12V DC Brushless Cooling Fan (3 inch by 3 inch)

By TECHDELIVERS

₹176 ~~₹299~~

You save ₹123!

41.14% OFF

The TECHDELIVERS 12 V DC Brushless Cooling Fan (3 inch by 3 inch) is devices used to dissipate heat from electronic components, machinery, or systems by circulating air and facilitating heat exchange. They play a crucial role in preventing overheating, which can lead to reduced performance, component damage, or even system failure. Cooling fans are commonly used in computers, electronics, industrial equipment, and various applications where heat dissipation is essential. Cooling Fans: Heat Dissipation: Cooling fans help dissipate excess heat generated by electronic components, such as CPUs, GPUs, power supplies, and amplifiers. Air Circulation: Fans promote air circulation within an enclosure or around components, reducing hotspots and maintaining a more uniform temperature distribution. Types of Fans: There are various types of cooling fans, including axial fans, centrifugal fans (also called blowers), and crossflow fans. Each type has different airflow characteristics and use cases. Airflow Direction: Cooling fans can be configured to blow air into an enclosure (intake) or to pull air out of it (exhaust), depending on the specific cooling requirements. CFM (Cubic Feet per Minute): CFM is a measure of the volume of air a fan can move in a minute. It indicates the fan's cooling capacity—the higher the CFM, the more air the fan can move, which usually results in better heat dissipation. Noise Level: Fans produce noise due to the air movement and motor operation. Noise level is often measured in decibels (dB), and quieter fans are preferred in noise-sensitive environments. Fan Speed: Fan speed is measured in rotations per minute (RPM). Higher RPM values generally result in more airflow and cooling, but they can also lead to increased noise. PWM (Pulse Width Modulation): Many modern fans support PWM control, allowing the fan speed to be adjusted dynamically to balance cooling needs and noise levels. Cooling fans are essential components for maintaining the optimal operating temperature of electronic devices and systems. Proper cooling ensures reliable performance, extends component lifespan, and reduces the risk of damage due to overheating.

TECHDELIVERS 4 V 1000 mAh Sealed Lead Acid Rechargeable Battery, RB410

Ships within 24 hrs

TECHDELIVERS 4 V 1000 mAh Sealed Lead Acid Rechargeable Battery, RB410

By TECHDELIVERS

₹113

Introducing the TECHDELIVERS 4 V 1000 mAh Sealed Lead Acid Rechargeable Battery, TD-RB410—the perfect power solution for your toys and electronic DIY projects. This reliable rechargeable battery boasts a capacity of 1000 mAh and operates at a voltage of 4 V, ensuring long lasting performance and consistent energy supply. Designed with a durable ABS body, this battery combines resilience with lightweight convenience, making it ideal for various applications. The TECHDELIVERS 4 V Rechargeable Battery is not only user-friendly but also environmentally conscious, allowing you to recharge and reuse, reducing waste in the process. Its compact design and sleek white and blue color make it an excellent addition to your battery collection. Whether powering up remote-controlled toys, household gadgets, or innovative DIY electronics, this versatile battery meets your needs efficiently. Upgrade your power supply with the TECHDELIVERS 4 V 1000 mAh Sealed Lead Acid Rechargeable Battery and experience superior performance with every charge.

TECHDELIVERS Rocker Switch 6 Pin 6 A/250 V Direction Control Remote DPDT Robot Switch (Pack of 25)

Ships within 24 hrs

TECHDELIVERS 6 Pin Rocker Switch 6 Amp Direction Control Remote DPDT Robot Switch

By TECHDELIVERS

Pack of 25 piece

₹1,297 - ₹1,297

You save ₹702!

35.12% OFF

The TECHDELIVERS 6 Pin Rocker Switch is a versatile component designed for controlling the direction of motors in robotic and other electronic applications. This Double Pole Double Throw (DPDT) switch can handle up to 6 amps of current, making it suitable for a wide range of moderate power applications. The switch features six pins, allowing for flexible wiring configurations to control the direction of current flow, which is essential for reversing motor direction in remote control robots and other devices. Its rocker design provides a user-friendly interface, ensuring easy and reliable operation. This switch is ideal for hobbyists and professionals working on projects that require precise direction control of motors, offering robust performance and durability. The TECHDELIVERS 6 Pin Rocker Switch is an essential component for any project involving motor direction control, providing reliable and efficient operation.

Type of Product : Rocker Switch

Color : Black

No. Of Pin : 6

Operation Mode : ON-OFF

Terminal : DPDT

Switch Type : Rocker Switch, DPDT

Actuator Type : Push Button

Current Rating : 6 A

Voltage : 250 V

Country of Origin : India

TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine, 0308YHUZIH7

Ships within 24 hrs

TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine, 0308YHUZIH7

By TECHDELIVERS

₹329 ~~₹399~~

You save ₹70!

17.54% OFF

The TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine refers to a type of electric motor that is connected to a fan blade. The motor's primary purpose is to rotate the fan blade and create airflow or ventilation. This setup is commonly found in various appliances and equipment where cooling or air circulation is essential. Here's how the motor with a fan blade typically works: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. In this context, it's usually an electric motor designed to rotate the fan blade. The motor can be of different types, such as AC (alternating current) or DC (direct current), depending on the application. 2. Fan Blade: The fan blade is a component with curved or angled surfaces that are designed to move air when rotated. The blade is connected to the shaft of the motor, so when the motor spins, it also drives the fan blade to rotate. 3. Housing: The motor and fan blade assembly is usually housed in a protective casing or housing. The housing provides structural support, protection, and helps guide the airflow generated by the rotating fan blade. Applications of motors with fan blades include: 1. Cooling Fans: These are commonly found in electronic devices, computers, laptops, and other equipment to dissipate heat and prevent overheating. 2. HVAC Systems: Heating, Ventilation, and Air Conditioning systems use motors with fan blades to circulate air and maintain indoor comfort. 3. Household Fans: Ceiling fans, pedestal fans, table fans, and other types of fans in households use this configuration for air circulation. 4. Automotive Cooling Fans: In vehicles, motors with fan blades are used in cooling fans for the engine and air conditioning system. 5. Industrial Fans: Large industrial fans used for ventilation, air circulation, and cooling purposes also use this setup. The motor with a fan blade is a practical and efficient way to move air and provide cooling in various applications. The size and power of the motor, as well as the design of the fan blade, are tailored to the specific requirements of the device or system in which it is used.

TECHDELIVERS 775 and 555 DC Motors 12-24 V DC High-speed Large Torque Motors for DIY Model Cars

Ships within 24 hrs

TECHDELIVERS 775 and 555 DC Motors 12-24 V DC High-speed Large Torque Motors for DIY Model Cars

By TECHDELIVERS

₹483 ~~₹799~~

You save ₹316!

39.55% OFF

The TECHDELIVERS 775 and 555 DC Motors 12-24 V DC High-speed Large Torque Motors for DIY Model Cars Small Drill Micro-machine, short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size, 0624XOJ5C6W

Ships within 24 hrs

TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size, 0624XOJ5C6W

By TECHDELIVERS

Pack of 10 piece

₹176 ~~₹299~~

You save ₹123!

41.14% OFF

The TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size . Transfer paper is commonly used in the process of making DIY PCBs at home. The transfer paper method allows you to transfer the circuit design from a printed image onto a copper-clad PCB board, which is then etched to create the desired PCB circuit. Here's a step-by-step guide to the transfer paper method for creating a PCB: Materials Needed:
1. Copper-clad PCB board
2. Circuit design printed on regular paper using a laser printer (mirrored/flipped horizontally)
3. Transfer paper (also known as iron-on transfer paper or toner transfer paper)
4. Iron
5. Etching solution (such as ferric chloride or ammonium persulfate)
6. Plastic container for etching
7. Rubber gloves
8. Fine sandpaper or abrasive pad
9. Safety goggles Steps: 1. Circuit Design: Create or download the desired circuit design using PCB design software. Print the circuit design on regular paper using a laser printer. The design should be mirrored or flipped horizontally, as it will be transferred to the copper side of the PCB. 2. Preparing the Copper Board: Cut the copper-clad PCB board to the desired size for your circuit. Clean the copper surface thoroughly with fine sandpaper or an abrasive pad to remove any oxidation or impurities. 3. Preparing the Transfer Paper: Cut the transfer paper to the size of the PCB board. Place the printed side of the transfer paper (with the circuit design) onto the cleaned copper surface. Ensure that the toner side is in contact with the copper surface. 4. Heat Transfer: Preheat the iron to a medium-high setting (without steam). Place the iron on top of the transfer paper and apply even pressure while moving the iron in a circular motion. Make sure to cover the entire circuit design area. Apply heat for about 2-3 minutes. 5. Cooling and Peeling: Allow the transfer paper to cool down for a few minutes. Once cool, gently peel off the transfer paper. The toner from the paper should now be transferred onto the copper surface. 6. Etching: Wear rubber gloves and safety goggles for this step. Prepare the etching solution in a plastic container according to the manufacturer's instructions. Submerge the copper-clad board with the toner in the etching solution. Agitate the container gently to ensure even etching. The etching process will remove the exposed copper areas, leaving the printed circuit behind.

TECHDELIVERS PCB toner transfer paper, Glossy Paper A4 size (Pack of 50)

Ships within 24 hrs

TECHDELIVERS PCB Toner Transfer Paper, Glossy Paper Size A4

By TECHDELIVERS

Pack of 50 piece

₹494 - ₹494

You save ₹205!

29.33% OFF

TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a specialized printing medium designed for creating high-quality printed circuit board (PCB) layouts with ease and precision. This paper is specifically engineered for use in the toner transfer method, a popular technique used by electronics enthusiasts and professionals for transferring circuit designs onto copper-clad boards.The glossy finish of the paper ensures crisp and clear printing of PCB designs, allowing for intricate details and fine traces to be accurately reproduced. The A4 size is a standard dimension that provides ample space for printing multiple circuit designs on a single sheet, maximizing efficiency and reducing waste during the PCB fabrication process.One of the key advantages of TECHDELIVERS PCB Toner Transfer Paper is its compatibility with laser printers and copiers commonly found in home offices and professional work environments. This compatibility ensures that users can easily print their circuit designs directly onto the transfer paper without the need for specialized printing equipment.The paper's heat-resistant properties are crucial for the toner transfer method, where the printed circuit design is transferred from the paper onto a copper-clad board using heat and pressure. TECHDELIVERS PCB Toner Transfer Paper can withstand the high temperatures required for successful toner transfer, ensuring reliable and consistent results.Moreover, the glossy surface of the paper facilitates smooth toner transfer onto the copper surface of the PCB, minimizing the risk of smudging or smearing during the transfer process. This contributes to the overall quality and accuracy of the transferred circuit pattern, making it easier for users to etch and create functional PCBs.Overall, TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a reliable and efficient solution for creating professional-grade PCB layouts using the toner transfer method. Its compatibility with laser printers, heat-resistant properties, and glossy finish make it an essential tool for electronics enthusiasts, hobbyists, and professionals involved in PCB prototyping and fabrication.

Type of Product : PCB toner transfer paper

Sheet Size : A4

Paper Finish : Glossy

TECHDELIVERS 4V 1000mAh Sealed Lead Acid Rechargeable Battery TD-BAT4V1A

Ships within 24 hrs

TECHDELIVERS 4 V ABS Body Sealed Lead Acid Rechargeable Battery

By TECHDELIVERS

₹113 - ₹199

You save ₹1,006!

89.9% OFF

TECHDELIVERS offers a range of sealed acid lead rechargeable batteries designed to deliver reliable power solutions for various applications. These batteries are known for their durability, efficiency, and long-lasting performance, making them suitable for use in diverse industries and settings.One of the key features of TECHDELIVERS sealed acid lead rechargeable batteries is their sealed construction. This design ensures that the electrolyte is contained within the battery, eliminating the need for regular maintenance and reducing the risk of leaks or spills. This makes them safe to use in indoor and outdoor environments without the risk of acid exposure.The batteries are built with high-quality materials that enhance their performance and lifespan. The lead plates inside the battery are designed to withstand repeated charging and discharging cycles, resulting in a longer operational life compared to conventional batteries. This durability is essential for applications where uninterrupted power supply is critical.TECHDELIVERS batteries are also rechargeable, allowing users to easily replenish their power supply when needed. This feature is particularly beneficial for applications where portable power sources are required or in systems that rely on backup power during outages.Moreover, these batteries offer reliable performance even in challenging conditions such as extreme temperatures or high discharge rates. This versatility makes them suitable for use in a wide range of environments, from industrial settings to residential backup power systems.In addition to their performance benefits, TECHDELIVERS sealed acid lead rechargeable batteries are designed with safety in mind. They incorporate features such as built-in protection against overcharging, over-discharging, and short circuits, reducing the risk of damage to the battery and associated equipment.Overall, TECHDELIVERS sealed acid lead rechargeable batteries combine durability, efficiency, and safety to provide reliable power solutions for diverse applications, making them a trusted choice for businesses and individuals alike.

Battery Type : Lead Acid

Type of Product : Rechargeable Battery

Color : Black

Application : For Toys, Electronics DIY Projects

Voltage : 4 V

Material : ABS Body

TECHDELIVERS 3.7 V Dual Battery Charger Li-ion 18650/16340/14500 Camera Battery Charger

Ships within 24 hrs

TECHDELIVERS 3.7 V Dual Battery Charger Li-ion Camera Battery Charger

By TECHDELIVERS

₹235 - ₹235

You save ₹664!

73.86% OFF

The TECHDELIVERS 3.7 V Dual Battery Charger is a specialized charger designed specifically for Li-ion camera batteries, offering convenience, efficiency, and safety for photographers and videographers. This charger is engineered to cater to the power needs of modern digital cameras and camcorders that utilize 3.7-volt lithium-ion rechargeable batteries.One of the standout features of the TECHDELIVERS Dual Battery Charger is its ability to simultaneously charge two batteries at once. This dual-charging capability is especially beneficial for professionals or enthusiasts who use multiple batteries throughout a shoot and need a quick and convenient way to keep their gear powered up.The charger is equipped with intelligent charging technology that monitors and adjusts the charging process based on the battery's condition and capacity. This ensures optimal charging performance while protecting the batteries from overcharging, overheating, and overcurrent, thus prolonging their lifespan and maintaining their reliability.Compatibility is another key aspect of the TECHDELIVERS Dual Battery Charger. It is designed to work with a wide range of popular Li-ion camera batteries, including those used in DSLRs, mirrorless cameras, action cameras, and camcorders from various brands. This versatility makes it a versatile accessory for photographers and videographers who use multiple camera systems or upgrade their equipment over time.The charger features a user-friendly design with clear LED indicators that provide real-time status updates during the charging process. Users can easily monitor the charging progress, battery level, and any potential issues, ensuring a hassle-free experience.Additionally, the TECHDELIVERS Dual Battery Charger is compact and lightweight, making it ideal for travel and on-location shoots. Its universal voltage compatibility allows for worldwide use, providing flexibility for photographers working in different regions.Overall, the TECHDELIVERS 3.7 V Dual Battery Charger is a reliable and efficient solution for powering Li-ion camera batteries, offering convenience, safety, and compatibility for photographers and videographers who rely on their gear for capturing memorable moments.

Type of Product : Battery Charger

Color : Black

Weight : 300 g

Voltage : 3.7 V

Input Voltage : 240 V

Output Voltage : 4.2 V

Country of Origin : India

Package Contains : 1 x Battery Charger (batteries are not included)

TECHDELIVERS TIP122 NPN and TIP127 PNP Power Darlington Transistor, 1025XNDUMU1 (Pack of 2)

Ships within 24 hrs

TECHDELIVERS 3 Pin Through Hole TIP122 NPN & TIP127 PNP Power Darlington Transistor

By TECHDELIVERS

Pack of 2 piece

₹112 - ₹112

You save ₹1,287!

91.99% OFF

The TECHDELIVERS 3 Pin Through Hole TIP122 NPN and TIP127 PNP Power Darlington Transistors are high-performance electronic components designed for various switching and amplification applications. The TIP122 is an NPN Darlington transistor, while the TIP127 is its PNP counterpart, each offering robust performance in their respective roles. These transistors are known for their high current gain and the ability to handle significant loads, making them ideal for driving motors, relays, and other high-power devices. The Darlington pair configuration provides a high current gain, allowing the transistors to amplify weak input signals into stronger output signals efficiently. Both transistors are housed in a durable TO-220 package, which is suitable for through-hole mounting on a circuit board. They are characterized by their ability to withstand high voltage and current levels, ensuring reliable operation in demanding environments. These transistors are widely used in power amplification, switching applications, and other electronic circuits requiring stable performance and high current handling capabilities.

Type of Product : Power Darlington Transistor

Application : Industrial, Power Management

No. Of Pin : 3 Pin

transistor Type : NPN and PNP

Color : Black

Used For : low speed switching and amplification.

Mounting Type : Through Hole

Type : TIP122 NPN & TIP127 PNP

TECHDELIVERS BC557 NPN TO 92 General Purpose Transistor, 1025XMXXW3Z (Pack of 2)

Ships within 24 hrs

TECHDELIVERS 3 Pin Through Hole BC557 NPN General Purpose Transistor

By TECHDELIVERS

Pack of 2 piece

₹76 - ₹76

You save ₹623!

89.13% OFF

The TECHDELIVERS 3 Pin Through Hole BC557 is a general-purpose PNP transistor designed for a wide range of electronic applications. It is typically used for switching and amplification purposes in both analog and digital circuits. The BC557 is known for its versatility and reliability, making it a popular choice for various projects. It operates efficiently with moderate current and voltage levels, making it suitable for tasks such as signal amplification and switching small loads. The transistor is housed in a TO-92 package, which facilitates easy through-hole mounting on circuit boards. Its design allows for stable performance and good thermal management. The BC557 features a low saturation voltage and high current gain, which enhances its efficiency in amplifying weak signals. Its general-purpose nature makes it a valuable component in both consumer electronics and industrial applications, providing flexibility and reliable performance in a broad range of electronic designs.

Type of Product : General Purpose Transistor

Application : General purpose switching and amplification

No. Of Pin : 3 Pin

transistor Type : NPN

Color : Black

Mounting Type : Through Hole

Type : BC557 NPN

TECHDELIVERS DHT-11 Digital Temperature and Humidity Sensor for Arduino Raspberry 8051, 0219VCB030P

Ships within 24 hrs

TECHDELIVERS 4 Pin Temperature and Humidity Sensor Suitable for Arduino

By TECHDELIVERS

₹211 - ₹211

You save ₹88!

29.43% OFF

The TECHDELIVERS 4 Pin Temperature and Humidity Sensor is a versatile component suitable for Arduino projects, offering reliable measurement of environmental conditions. This sensor is designed to accurately detect both temperature and humidity levels, making it ideal for applications in weather monitoring, climate control, and indoor environment management. The 4-pin configuration ensures easy integration with Arduino boards, with connections typically including power (VCC), ground (GND), and data output pins for both temperature and humidity readings. The sensor is known for its precision and stability, providing consistent and accurate data essential for developing responsive and adaptive systems. Its compact design allows for easy placement in various setups, from home automation projects to environmental monitoring systems.

Color : Blue

No. Of Pin : 4

Country of Origin : India

TECHDELIVERS 500 RPM Center shaft DC Metal Gear Motor

Ships within 24 hrs

TECHDELIVERS 6-12 V DC Metal Geared Motor 6 mm Shaft Diameter

By TECHDELIVERS

₹306 - ₹306

You save ₹1,193!

79.59% OFF

The TECHDELIVERS 6-12 V DC Metal Geared Motor with a 6 mm shaft diameter is a robust and versatile component designed for various mechanical and robotic applications. This motor operates efficiently within a voltage range of 6 to 12 volts DC, offering flexibility in power supply and control. The metal gears provide enhanced durability and strength, ensuring reliable performance and longevity even under demanding conditions. The 6 mm shaft diameter allows for easy integration with compatible components and mechanisms, making it suitable for driving wheels, actuators, and other mechanical parts in robotic systems and DIY projects. The geared design delivers a balanced combination of speed and torque, enabling precise control and movement in applications such as small robots, automated systems, and model vehicles. Its metal construction adds to its robustness, making it a preferred choice for applications requiring consistent and dependable motor performance. The TECHDELIVERS metal geared motor is ideal for both hobbyists and professionals seeking a reliable solution for their mechanical and robotics needs.

Voltage : 6-12 V

Type of Product : DC Metal Geared Motor

Material : Metal

Shaft Diameter : 6 mm

Ideal For : Various applications like robotics, momentary projects, etc

TECHDELIVERS DC 12 V- 24 V High Speed Metal Torque Motor DC for DIY Toy Cars Drill (Pack of 2)

Ships within 24 hrs

TECHDELIVERS DC 12 V- 24 V High Speed Metal Torque Motor DC for DIY Toy Cars Drill (Pack of 2)

By TECHDELIVERS

Pack of 2 piece

₹388 ~~₹599~~

You save ₹211!

35.23% OFF

The TECHDELIVERS DC 12 V- 24 V High Speed Metal Torque Motor DC for multipurpose DIY Toy Cars Drill (Pack of 2 Piece), short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque, 1118V43ZQ34

Ships within 24 hrs

TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque, 1118V43ZQ34

By TECHDELIVERS

₹235 ~~₹499~~

You save ₹264!

52.91% OFF

The TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque is a system that combines three main components: a motor, a turbine, and a generator. This setup allows for the conversion of mechanical energy into electrical energy. The process involves using the motor to drive the turbine, which, in turn, rotates the generator to produce electricity. Here's how each component works in the motor turbine generator system: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. It provides the initial rotational force required to drive the turbine. 2. Turbine: The turbine is a machine with blades or buckets that rotate when subjected to a fluid (gas or liquid) flow. In the context of a motor turbine generator, the turbine is connected to the motor's shaft and rotates when the motor is powered on. 3. Generator: The generator is an electrical device that converts mechanical energy (rotational motion) into electrical energy (electricity). As the turbine rotates, it drives the generator, causing the generation of electricity through electromagnetic induction. The motor turbine generator system is commonly used in various applications, such as: 1. Power Plants: In some power plants, particularly in hydroelectric power plants, water turbines are driven by electric motors to generate electricity. 2. Wind Turbines: In wind power systems, the motor is used to initiate the rotation of the turbine, which harnesses the kinetic energy of the wind and drives the generator to produce electrical power. 3. Gas Turbines: In some gas turbine power plants, electric motors are used to start the initial rotation of the gas turbine before it begins generating power on its own. 4. Experimental Setups: Motor turbine generator systems are also used in educational and experimental setups to demonstrate the principles of energy conversion and electrical generation. It's important to note that in many cases, the motor turbine generator system may be a part of a larger complex power generation system. The choice of the motor, turbine, and generator components depends on the specific application, power requirements, and efficiency considerations.

TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, 1013UZ7UGG0

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, 1013UZ7UGG0

By TECHDELIVERS

Bottle of 500 gram

₹282 ~~₹499~~

You save ₹217!

43.49% OFF

The TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, a chemical sorcerer in the world of electronics, emerges as a transformative solution that shapes the pathways of innovation. This unassuming concoction wields the power to carve intricate designs onto copper-clad circuit boards, giving birth to the intricate patterns that underlie modern technology. Designed with precision and reactivity, a PCB etching agent performs a delicate dance of chemical reactions. It selectively removes unwanted copper from the surface of a circuit board, leaving behind the pathways that guide electrical currents. It's a conductor of transformation, turning raw copper into meticulously designed circuitry. In the realm of circuit board production, a PCB etching agent is the master of detail, bringing complex designs to life. It transforms flat sheets of copper into functional works of art, connecting components and enabling the flow of information and power that powers our devices. With an eye for precision, a PCB designer employs the etching agent to create connections that dictate the functionality of a circuit. It's a tool that breathes life into the dreams of engineers, artists, and innovators, allowing their visions to materialize as tangible pathways of possibility. Beyond its functional prowess, a PCB etching agent stands as a symbol of controlled creativity. It's the fusion of chemistry and technology, where the controlled application of science yields results that spark progress. In its transformative power, it embodies the essence of design, intricacy, and the ever-evolving journey of human ingenuity. In the realm of innovation, a PCB etching agent is the silent collaborator that forges the connections that drive our digital lives. It's the alchemical blend that turns copper into circuits and circuits into devices, leaving an indelible mark on the tapestry of technology.

TECHDELIVERS 20 W 12 V DC Led SMD Bead Chip COB Cool White DIY lamp Light (Pack of 12), 0821YFCGR7K

Ships within 2 days

TECHDELIVERS 12 V DC LED Light SMD Bead Chip 20 W Circuit on Board

By TECHDELIVERS

Pack of 12 piece

₹471 - ₹471

You save ₹28!

5.61% OFF

The TECHDELIVERS 12V DC LED Light with SMD (Surface Mount Device) Bead Chip is a versatile lighting component suitable for a wide range of applications. With its low voltage requirement, SMD chip technology, and compact design, this LED light offers efficient and effective illumination in various settings.**SMD Bead Chip Technology:**The SMD bead chip technology used in this LED light ensures a compact size while delivering bright and uniform illumination. SMD LEDs are known for their high brightness levels, energy efficiency, and longevity, making them ideal for lighting applications.**Low Voltage Operation:**Operating at 12 volts DC, this LED light is designed for low voltage systems, making it safe and energy-efficient. It can be powered by various sources such as batteries, solar panels, or low voltage power supplies, offering flexibility in installation and usage.**Versatile Applications:**The TECHDELIVERS LED light with SMD bead chip is suitable for a wide range of indoor and outdoor applications. It can be used for accent lighting, task lighting, architectural lighting, automotive lighting, marine lighting, and more.**Compact Design:**The compact size of the LED light makes it easy to integrate into different fixtures and setups. Its small footprint allows for discrete placement while still providing effective illumination.**Energy Efficiency and Longevity:**LED technology is known for its energy efficiency, consuming significantly less power than traditional lighting sources. The SMD bead chip design further enhances energy savings while providing a long operational life span, reducing maintenance and replacement costs.**Easy Installation:**The LED light is designed for easy installation, with solder pads or connectors for wiring. It can be mounted on various surfaces using adhesive backing, screws, or brackets, depending on the application requirements.**Color Options:**Depending on the specific model or variant, the LED light may be available in different color options such as white, warm white, red, green, blue, or RGB (color-changing), allowing for customization based on the desired lighting effect.In summary, the TECHDELIVERS 12V DC LED Light with SMD Bead Chip offers efficient, durable, and versatile lighting solutions for a variety of indoor and outdoor applications. Its low voltage operation, compact design, energy efficiency, and easy installation make it a reliable choice for illuminating spaces, objects, or environments with bright and long-lasting light.

Power : 20 W

Voltage : 12 V

Material : Thin_film

Color Temperature : 8000 K

Country of Origin : India

Lighting Type : LED

Average Life : 50000 h

Page 1 of 1 results

Product Name	Expected Price	Dispatch Time	Discount
L&T [ Lauritz Knudsen ] 415 V 1A/5A APFC Controller 144x144 mm, CS90903OOOO	₹23,800	5 days	--
Siemens 3UG4582-1AW31 0-250 V Insulation monitoring relay 1-110 kΩ	₹50,739	45 days	36.76% OFF
Omron Rotary Encoder Incremental Type, E6C3-CWZ5GH 3600P/R 1M	₹31,859	18 days	--
INDUSTRIAL COMPUTER I7-IPC6000 Intel Chipset HM76 with 8 GB DDR3 RAM & 1 TB Storage	₹129,799	60 days	--
Siemens 132 kw 110-230 V AC/DC Sirius Digital Soft Starter 3RW5073-6AB14	₹353,999	45 days	35.59% OFF
Siemens 37 kw 110-230 V AC/DC Sirius Digital Soft Starter 3RW4038-1BB14	₹176,999	45 days	35.47% OFF
Fluxteq Thin Film Heat Flux Sensor Copper	₹33,039	5 days	--
L&T [ Lauritz Knudsen ] J648B1 240VAC Daily Time Switch	₹2,745	24 hrs	--

TECHDELIVERS Industrial Automation

Top Selling TECHDELIVERS Industrial Automation Products Price List for June 2026