• Home /
• All Brands /
• TOTEM

Have a question? Call us now at +91 9650660070

Totem Products Online

Showing 40 out of 2966 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

TOTEM HSS Straight Flute Type 'C' Long Shank Ground Thread Machine Tap IS-6175 - Part IV Standard (Size: 3 - 11 mm)

By TOTEM

₹919 - ₹2,595

TOTEM HSS Straight Flute Type 'C' Long Shank Ground Thread Machine Tap IS-6175 - Part IV Standard (Size: 3 - 11 mm) Totem Long Shank Ground Thread Machine Tap is a precision-manufactured threading tool engineered for high-performance machine tapping in demanding industrial and workshop settings. Featuring a ground thread profile and an extended shank design, this tap delivers superior dimensional accuracy, excellent surface finish, and reliable thread quality—even in deep holes and hard-to-reach areas where standard taps struggle. The ground thread cutting edges enhance precision and reduce cutting resistance, resulting in cleaner, burr-free threads and reduced risk of tool breakage. Constructed from high-quality tool steel with strict manufacturing tolerances, the Totem Long Shank tap offers excellent strength, wear resistance, and dependable performance for repetitive machine tapping operations. Its long shank provides increased reach and flexibility for machining tasks in deep bore applications, large workpieces, and fixtures where extended tool access is needed. Optimized flute geometry promotes effective chip evacuation, minimizing clogging and enhancing cutting efficiency across a range of materials including mild steel, alloy steel, cast iron, and non-ferrous metals.

Type of Product : Long Shank Ground Thread Machine Tap

Product Sub Type : Straight Flute Type 'C'

Grade : IS-6175 - Part IV

Material : HSS

Explore other Variants (21)

Ships within 24 hrs

TOTEM FBK0500751 Square 4 Flute Ball Nose End Mill (Dia 6 mm)

By TOTEM

₹1,143  

Add to Cart Buy Now

Ships within 24 hrs

TOTEM 10 X 25 X 70 X 10 mm, 4 Flute Centre Cutting TiAlN Coated Carbide End Mill (FBK0500727)

By TOTEM

₹2,713  

OLD JIT

Add to Cart Buy Now

Ships within 3 days

Totem 16.5mm Reduced Shank Drill FBR0200482

By TOTEM

₹1,096   ₹2,300

You save ₹1,204!

52.34% OFF

Add to Cart Buy Now

Related Searches

totem hand taps hss-e

totem hand taps

totem hss hand taps

totem hss-e hand taps

hss-e hand taps

Ships within 3 days

TOTEM Straight Fluted Tap HSS TiN Gold Finish IS-6175 Standard (Size 1 - 5 mm)

By TOTEM

₹435 - ₹1,025

You save ₹204!

23.59% OFF

TOTEM Straight Fluted Tap HSS TiN Gold Finish IS-6175 Standard (Size 1 - 5 mm) TOTEM Straight Fluted Tap HSS TiN Gold Finish IS-6175 Standard is a high-precision threading tool designed for dependable performance in industrial and workshop applications. Manufactured from premium High Speed Steel (HSS), this tap offers excellent strength, toughness, and resistance to wear, making it suitable for repeated use in demanding conditions. The straight fluted design ensures smooth and controlled chip formation, which helps in producing clean and accurate internal threads while minimizing the risk of tool jamming. The TiN (Titanium Nitride) gold finish enhances surface hardness and significantly reduces friction during the tapping process. This coating improves heat resistance and extends tool life, especially during high-speed or continuous machining operations. Conforming to the IS-6175 standard, the tap ensures precise thread geometry and reliable compatibility with standard industrial requirements. This tap is ideal for threading a wide range of materials such as mild steel, alloy steel, cast iron, and non-ferrous metals. Known for its dimensional accuracy and consistent performance, the TOTEM Straight Fluted Tap HSS TiN Gold Finish is a trusted choice for machine shops, fabrication units, and maintenance applications where high-quality and durable threading tools are essential.

Material : HSS

Type of Product : Straight Fluted Tap

Standard : IS-6175

Finish Type : TiN Gold

Explore other Variants (20)

Ships within 3 days

TOTEM 3.5 x 0.6mm TiN Gold HSS Spiral Pointed Tap

By TOTEM

₹565   ₹699

You save ₹134!

19.12% OFF

High-speed steel tools are good for many general purpose applications, offering a mixture of hardness and toughness for wear resistance
Titanium nitride coatings add a tough layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
Round shanks allow use with a large sort of toolholding systems
Straight flute tools allow chips to gather within the flutes as they cut and are well matched for many applications in shallow cuts
Right-hand cut tools have a cutting action that engages after they are run in a very clockwise direction
• Material specific angular geometry ensures chips are pushed downwards
• Axial through coolant taps

Add to Cart Buy Now

Ships within 3 days

TOTEM 4 x 0.35mm TiN Gold HSS Spiral Pointed Tap

By TOTEM

₹471   ₹932

You save ₹461!

49.47% OFF

High-speed steel tools are good for many general purpose applications, offering a mixture of hardness and toughness for wear resistance
Titanium nitride coatings add a tough layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
Round shanks allow use with a large sort of toolholding systems
Straight flute tools allow chips to gather within the flutes as they cut and are well matched for many applications in shallow cuts
Right-hand cut tools have a cutting action that engages after they are run in a very clockwise direction
• Material specific angular geometry ensures chips are pushed downwards
• Axial through coolant taps

Add to Cart Buy Now

Ships within 3 days

TOTEM Straight Fluted Tap HSS TiN Gold Finish IS-6175 Standard (Size 6 - 14 mm)

By TOTEM

₹447 - ₹1,887

You save ₹305!

14.72% OFF

TOTEM Straight Fluted Tap HSS TiN Gold Finish IS-6175 Standard (Size 6 - 14 mm) TOTEM Straight Fluted Tap HSS TiN Gold Finish IS-6175 Standard is a high-precision threading tool designed for dependable performance in industrial and workshop applications. Manufactured from premium High Speed Steel (HSS), this tap offers excellent strength, toughness, and resistance to wear, making it suitable for repeated use in demanding conditions. The straight fluted design ensures smooth and controlled chip formation, which helps in producing clean and accurate internal threads while minimizing the risk of tool jamming. The TiN (Titanium Nitride) gold finish enhances surface hardness and significantly reduces friction during the tapping process. This coating improves heat resistance and extends tool life, especially during high-speed or continuous machining operations. Conforming to the IS-6175 standard, the tap ensures precise thread geometry and reliable compatibility with standard industrial requirements. This tap is ideal for threading a wide range of materials such as mild steel, alloy steel, cast iron, and non-ferrous metals. Known for its dimensional accuracy and consistent performance, the TOTEM Straight Fluted Tap HSS TiN Gold Finish is a trusted choice for machine shops, fabrication units, and maintenance applications where high-quality and durable threading tools are essential.

Material : HSS

Type of Product : Straight Fluted Tap

Standard : IS-6175

Finish Type : TiN Gold

Explore other Variants (21)

Ships within 3 days

Totem 14mm Reduced Shank Drill FBR0200461

By TOTEM

₹872   ₹1,797

You save ₹925!

51.48% OFF

Add to Cart Buy Now

Ships within 3 days

Totem 18mm Reduced Shank Drill FBR0200465

By TOTEM

₹1,297   ₹2,673

You save ₹1,376!

51.47% OFF

Add to Cart Buy Now

Ships within 3 days

Totem 15mm Reduced Shank Drill FBR0200462

By TOTEM

₹966   ₹2,015

You save ₹1,049!

52.07% OFF

The Totem 15mm Reduced Shank Drill FBR0200462 is a high-quality drill bit designed for use in a variety of applications. This drill bit is made from high-speed steel, which provides excellent durability and strength, making it ideal for use in tough materials such as metal, wood, and plastic.
The reduced shank design of this drill bit allows it to fit into a wide range of drill chucks, making it a versatile tool that can be used with a variety of different drills. The 15mm diameter of the bit makes it ideal for drilling large holes, making it a great choice for use in construction, woodworking, and metalworking applications.
The Totem 15mm Reduced Shank Drill FBR0200462 features a precision-ground tip that ensures accurate drilling and reduces the risk of slipping or wandering. The tip is also designed to stay sharp for longer, reducing the need for frequent sharpening and ensuring that the bit remains effective over time.
This drill bit is also designed with a flute design that helps to remove chips and debris from the hole as it is being drilled. This helps to prevent clogging and ensures that the bit can continue to drill smoothly and effectively.
Overall, the Totem 15mm Reduced Shank Drill FBR0200462 is a high-quality drill bit that is designed to provide reliable performance in a variety of applications. Whether you are working with metal, wood, or plastic, this drill bit is sure to provide the accuracy and durability you need to get the job done right. So if you are looking for a versatile and reliable drill bit, be sure to check out the Totem 15mm Reduced Shank Drill FBR0200462 today!

Add to Cart Buy Now

Ships within 3 days

TOTEM UNF Straight Flute HSS Hand Tap 6.35 mm (1/4 inch)

By TOTEM

Pack of 1 piece

₹683  

These are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.
Hand taps can be supplied in sets of three bottom, second and taper leads, or individually.
Taper Taps have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes.
Second Taps have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom.
Bottom Taps have a chamfer (lead) of 1-2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes.

Add to Cart Buy Now

Ships within 3 days

Totem 2.8 mm Long Series HSS Parallel Shank Twist Drill FBR0200978

By TOTEM

₹211   ₹426

You save ₹215!

50.47% OFF

Add to Cart Buy Now

Ships within 3 days

Totem 6.3 mm x 12.7 mm A13 Cone Tungsten Carbide Rotary Burr FAC0200071

By TOTEM

₹884   ₹905

You save ₹21!

2.33% OFF

Add to Cart Buy Now

Ships within 3 days

Totem 19.5mm Reduced Shank Drill FBR0200485

By TOTEM

₹1,415   ₹2,976

You save ₹1,561!

52.45% OFF

Add to Cart Buy Now

Ships within 3 days

TOTEM Silver Cut Tap HSS-E SC4 TIALN Finish DIN 371 Standard (Tap Size: M3 - M10)

By TOTEM

₹660 - ₹931

You save ₹214!

23.84% OFF

TOTEM Silver Cut Tap HSS-E SC4 TIALN Finish DIN 371 Standard (Tap Size: M3 - M10) TOTEM Silver Cut Tap HSS-E is a premium-grade threading tool engineered for precision and durability in industrial machining applications. Manufactured from HSS-E (High Speed Steel with enhanced alloying elements), this tap delivers superior toughness, heat resistance, and wear performance compared to conventional HSS, making it ideal for cutting internal threads in a variety of materials including steel, stainless steel, cast iron, and non-ferrous alloys. The “Silver Cut” geometry is optimized for smooth chip evacuation and reduced cutting forces, which enhances cutting efficiency and extends tool life even under high-speed or heavy-duty tapping conditions. Designed with precise dimensions and excellent surface finish, the TOTEM Silver Cut Tap ensures consistent creation of accurate internal threads with minimal burr formation. Its robust construction and precision ground flutes provide stable performance, reduced vibration, and improved thread quality. Suitable for both manual and machine tapping operations, this tool is a practical choice for machine shops, production lines, maintenance workshops, and OEM applications.

Series : SC4

Material : HSS-E

Type of Product : Silver Cut Tap

Standard : DIN 371

Finish Type : TIALN Finish

Explore other Variants (7)

Ships within 3 days

TOTEM 8 x 1.25mm HSS-M2 Ground Thread Round Die

By TOTEM

₹837   ₹1,136

You save ₹299!

26.34% OFF

High Speed Steel Ground Dies

Add to Cart Buy Now

Ships within 2 days

Totem 3 mm carbide end mill cutter

By TOTEM

₹553  

Totem carbide end mill cutter 3 mm

Add to Cart Buy Now

Ships within 3 days

TOTEM Silver Cut Tap HSS-E SC4 TIALN Finish IS 6175 Part III Standard (Tap Size: M12 - M36)

By TOTEM

₹1,651 - ₹12,979

You save ₹203!

10.94% OFF

TOTEM Silver Cut Tap HSS-E SC4 TIALN Finish IS 6175 Part III Standard (Tap Size: M12 - M36) TOTEM Silver Cut Tap HSS-E is a premium-grade threading tool engineered for precision and durability in industrial machining applications. Manufactured from HSS-E (High Speed Steel with enhanced alloying elements), this tap delivers superior toughness, heat resistance, and wear performance compared to conventional HSS, making it ideal for cutting internal threads in a variety of materials including steel, stainless steel, cast iron, and non-ferrous alloys. The “Silver Cut” geometry is optimized for smooth chip evacuation and reduced cutting forces, which enhances cutting efficiency and extends tool life even under high-speed or heavy-duty tapping conditions. Designed with precise dimensions and excellent surface finish, the TOTEM Silver Cut Tap ensures consistent creation of accurate internal threads with minimal burr formation. Its robust construction and precision ground flutes provide stable performance, reduced vibration, and improved thread quality. Suitable for both manual and machine tapping operations, this tool is a practical choice for machine shops, production lines, maintenance workshops, and OEM applications.

Series : SC4

Material : HSS-E

Type of Product : Silver Cut Tap

Standard : IS 6175 Part III

Finish Type : TIALN Finish

Explore other Variants (11)

Ships within 3 days

Totem 13.5mm Reduced Shank Drill FBR0200479

By TOTEM

₹766   ₹1,584

You save ₹818!

51.63% OFF

Add to Cart Buy Now

Ships within 3 days

Totem 1.0mm-13.0mm HSS Drill Case Set (Pack of 25)

By TOTEM

Pack of 25 piece

₹6,489   ₹12,842

You save ₹6,353!

49.47% OFF

Add to Cart Buy Now

Ships within 5 days

Totem 1/4” Dia Serial Form BSP Thread Hand Tap - FAA0204623 (Pack of 2)

By TOTEM

Pack of 2 piece

₹3,303  

Totem presents 1/4” Dia Serial Form BSP Thread Hand Tap - FAA0204623 (Pack of 2). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

Add to Cart Buy Now

Ships within 5 days

Totem 3/16” Dia Serial Form BSW Thread Hand Tap - FAA0200034 (Pack of 3)

By TOTEM

Pack of 3 piece

₹1,887  

Totem presents 3/16” Dia Serial Form BSW Thread Hand Tap - FAA0200034 (Pack of 3). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

Add to Cart Buy Now

Ships within 3 days

TOTEM UNF Straight Flute HSS Hand Tap 9.50 mm (3/8 inch)

By TOTEM

Pack of 1 piece

₹943  

These are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.
Hand taps can be supplied in sets of three bottom, second and taper leads, or individually.
Taper Taps have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes.
Second Taps have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom.
Bottom Taps have a chamfer (lead) of 1-2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes.

Add to Cart Buy Now

Ships within 3 days

Totem 30mm Reduced Shank Drill FBR0200500

By TOTEM

₹3,067   ₹6,191

You save ₹3,124!

50.46% OFF

Add to Cart Buy Now

Ships within 3 days

Totem 25mm Reduced Shank Drill FBR0200492

By TOTEM

₹2,359   ₹4,539

You save ₹2,180!

48.03% OFF

Add to Cart Buy Now

Ships within 3 days

TOTEM HSS Straight Fluted Tap BSP Thread Type TiN Gold Finish Type (Size: 1/8 - 4 Inch)

By TOTEM

₹813 - ₹84,959

You save ₹251!

23.62% OFF

The TOTEM HSS Straight Fluted Tap BSP Thread Type TiN Gold Finish is a precision-engineered threading tool designed for accurate and reliable internal thread cutting in industrial and workshop applications. Manufactured from high-quality High Speed Steel (HSS) and coated with Titanium Nitride (TiN), this tap offers superior hardness, reduced friction, excellent heat resistance, and extended tool life. It is specifically designed for BSP (British Standard Pipe) parallel thread profiles, making it suitable for plumbing, hydraulics, pneumatics, and general pipe fitting tasks where precise, standardized threads are essential. The straight fluted design ensures smooth chip flow and minimizes clogging, resulting in clean, burr-free threads and reduced risk of tap breakage. The TiN gold finish enhances cutting efficiency and wear resistance, allowing consistent performance even during repetitive or heavy-duty use. This tap is suitable for machining a variety of materials including mild steel, alloy steel, cast iron, brass, and aluminum, and can be used in both manual and machine tapping operations.

Thread : BSP

Grade : BS - 949

Material : HSS

Type of Product : Straight Fluted Tap

Finish Type : TiN Gold

Explore other Variants (19)

Ships within 5 days

Totem 5x0.8 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0201897 (Pack of 3)

By TOTEM

Pack of 3 piece

₹2,123  

Totem presents 5x0.8 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0201897 (Pack of 3). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

Add to Cart Buy Now

Ships within 5 days

Totem 12x1 mm Metric Fine Pitch Series Hand Tap - FAA0202845 (Pack of 2)

By TOTEM

Pack of 2 piece

₹3,657  

Totem presents 12x1 mm Metric Fine Pitch Series Hand Tap - FAA0202845 (Pack of 2). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

Add to Cart Buy Now

Ships within 3 days

TOTEM 10 x 1.25mm HSS-M2 Ground Thread Round Die

By TOTEM

₹884   ₹1,193

You save ₹309!

25.9% OFF

High Speed Steel Ground Dies

Add to Cart Buy Now

Ships within 5 days

TOTEM HSS Spiral Point Short Machine Tap BSF Thread (Size: 1/8 - 1-1/2 Inch)

By TOTEM

₹730 - ₹16,519

TOTEM HSS Spiral Point Short Machine Tap BSF Thread (Size: 1/8 - 1-1/2 Inch) Totem Short Machine Tap is a precision-engineered threading tool designed for efficient internal thread cutting in machine tapping applications where limited space or shallow thread depth is required. Manufactured from high-quality tool steel, this tap offers excellent strength, durability, and resistance to wear, making it suitable for repetitive machining operations in industrial, automotive, and fabrication environments. The short design provides superior rigidity and reduced deflection compared to standard taps, resulting in cleaner, more accurate threads with minimal wobble—even in blind hole situations or when working close to shoulders. Its optimized flute geometry ensures effective chip evacuation and smoother cutting action, which reduces the risk of chip clogging and tool breakage. The Totem Short Machine Tap is ideal for use on a broad range of materials, including mild steel, alloy steel, cast iron, and various non-ferrous metals, and works well with CNC machines, tapping heads, and dedicated tapping fixtures.

Type of Product : Short Machine Tap

Product Sub Type : Spiral Point

Grade : BS - 949

Material : HSS

Thread : BSF

Explore other Variants (18)

Ships within 3 days

Totem 17mm Reduced Shank Drill FBR0200464

By TOTEM

₹1,132   ₹2,377

You save ₹1,245!

52.37% OFF

Add to Cart Buy Now

Ships within 3 days

TOTEM Silver Cut Tap HSS-E SC4 TIALN Finish UNF Thread DIN 374 Standard (Tap Size: 1/4 - 1 Inch)

By TOTEM

₹742 - ₹5,073

You save ₹772!

18.4% OFF

TOTEM Silver Cut Tap HSS-E SC4 TIALN Finish UNF Thread DIN 374 Standard (Tap Size: 1/4 - 1 Inch) TOTEM Silver Cut Tap HSS-E is a premium-grade threading tool engineered for precision and durability in industrial machining applications. Manufactured from HSS-E (High Speed Steel with enhanced alloying elements), this tap delivers superior toughness, heat resistance, and wear performance compared to conventional HSS, making it ideal for cutting internal threads in a variety of materials including steel, stainless steel, cast iron, and non-ferrous alloys. The “Silver Cut” geometry is optimized for smooth chip evacuation and reduced cutting forces, which enhances cutting efficiency and extends tool life even under high-speed or heavy-duty tapping conditions. Designed with precise dimensions and excellent surface finish, the TOTEM Silver Cut Tap ensures consistent creation of accurate internal threads with minimal burr formation. Its robust construction and precision ground flutes provide stable performance, reduced vibration, and improved thread quality. Suitable for both manual and machine tapping operations, this tool is a practical choice for machine shops, production lines, maintenance workshops, and OEM applications.

Series : SC4

Thread : UNF

Material : HSS-E

Type of Product : Silver Cut Tap

Standard : DIN 374

Finish Type : TIALN Finish

Explore other Variants (9)

Ships within 3 days

TOTEM Long Silver Cut Tap HSSE SC4 TIALN Finish IS 6175 IV Standard (Tap Size: M4 - M16)

By TOTEM

₹966 - ₹2,831

You save ₹587!

17.18% OFF

The TOTEM Long Silver Cut Tap HSSE SC4 with TiAlN Finish is a premium-grade threading tool engineered for high-performance machining and extended tool life in demanding industrial environments. Constructed from HSSE (High Speed Steel with Cobalt), this tap delivers superior toughness, excellent heat resistance, and enhanced wear performance compared to standard HSS tools. The TiAlN (Titanium Aluminum Nitride) coating provides advanced surface protection, dramatically reducing friction, increasing hardness, and improving oxidation resistance at elevated temperatures, making it ideal for heavy-duty tapping applications and prolonged use. Built to the IS 6175 IV Standard, this tap ensures precise thread geometry and consistent compatibility with metric thread specifications. The Silver Cut design promotes smooth, efficient cutting action with reduced cutting forces, while the long flute profile enhances chip evacuation and provides greater reach for deep hole and blind hole threading operations. This combination results in clean, burr-free threads and less tool breakage, even in tough materials.

Series : SC4

Material : HSS-E

Type of Product : Long Silver Cut Tap

Standard : IS 6175 PART IV

Finish Type : TIALN

Explore other Variants (11)

Ships within 5 days

Totem 14x1.5 mm Metric Fine Pitch Series Hand Tap - FAA0202988 (Pack of 2)

By TOTEM

Pack of 2 piece

₹4,601  

Totem presents 14x1.5 mm Metric Fine Pitch Series Hand Tap - FAA0202988 (Pack of 2). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

Add to Cart Buy Now

Ships within 5 days

Totem 8x1 mm Metric Fine Pitch Series Hand Tap - FAA0202697 (Pack of 2)

By TOTEM

Pack of 2 piece

₹2,241  

Totem presents 8x1 mm Metric Fine Pitch Series Hand Tap - FAA0202697 (Pack of 2). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

Add to Cart Buy Now

Ships within 3 days

TOTEM 6 x 1.00mm HSS-M2 Ground Thread Round Die

By TOTEM

₹671   ₹775

You save ₹104!

13.45% OFF

High Speed Steel Ground Dies

Add to Cart Buy Now

Ships within 3 days

TOTEM UNC Straight Flute HSS Hand Tap 12.7 mm (1/2 Inch) (Pack of 3)

By TOTEM

Pack of 3 piece

₹4,601  

These are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.
Hand taps can be supplied in sets of three bottom, second and taper leads, or individually.
Taper Taps have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes.
Second Taps have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom.
Bottom Taps have a chamfer (lead) of 1-2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes.

Add to Cart Buy Now

Ships within 3 days

TOTEM HSS Parallel Shank Twist Drill 118° Angle Point Jobber Series, Pack of 10 (Size: 5.8 - 7.2 mm)

By TOTEM

Pack of 10 piece

₹1,108 - ₹1,887

You save ₹1,673!

47% OFF

TOTEM HSS Parallel Shank Twist Drill 118° Angle Point Jobber Series, Pack of 10 (Size: 5.8 - 7.2 mm) Totem Parallel Shank Twist Drill is a high-performance drilling tool engineered for precision and durability in a wide range of industrial, workshop, and fabrication applications. Designed with a parallel shank for secure and accurate gripping in chucks and collets, this twist drill delivers stable drilling performance with reduced run-out and improved accuracy. Manufactured from premium quality high-grade steel, the drill bit offers excellent strength, wear resistance, and heat tolerance, making it suitable for drilling through materials such as mild steel, alloy steel, cast iron, aluminum, and other non-ferrous metals. The classic twist flute design efficiently evacuates chips and reduces friction during cutting, resulting in smoother holes, reduced heat build-up, and enhanced tool life. Its precise point geometry ensures reliable centering and fast penetration, minimizing walking and improving hole accuracy even at high speeds. The parallel shank enables firm gripping without taper adapters, simplifying tool setup and enhancing repeatability in production environments.

Type of Product : Parallel Shank Twist Drill

Material : HSS

Series : Jobber Series

Angle Point : 118°

Explore other Variants (19)

Ships within 3 days

TOTEM HSS Parallel Shank Twist Drill 118° Angle Point Jobber Series, Pack of 10 (Size: 1 - 2.5 mm)

By TOTEM

Pack of 10 piece

₹270 - ₹329

You save ₹350!

51.51% OFF

TOTEM HSS Parallel Shank Twist Drill 118° Angle Point Jobber Series, Pack of 10 (Size: 1 - 2.5 mm) Totem Parallel Shank Twist Drill is a high-performance drilling tool engineered for precision and durability in a wide range of industrial, workshop, and fabrication applications. Designed with a parallel shank for secure and accurate gripping in chucks and collets, this twist drill delivers stable drilling performance with reduced run-out and improved accuracy. Manufactured from premium quality high-grade steel, the drill bit offers excellent strength, wear resistance, and heat tolerance, making it suitable for drilling through materials such as mild steel, alloy steel, cast iron, aluminum, and other non-ferrous metals. The classic twist flute design efficiently evacuates chips and reduces friction during cutting, resulting in smoother holes, reduced heat build-up, and enhanced tool life. Its precise point geometry ensures reliable centering and fast penetration, minimizing walking and improving hole accuracy even at high speeds. The parallel shank enables firm gripping without taper adapters, simplifying tool setup and enhancing repeatability in production environments.

Type of Product : Parallel Shank Twist Drill

Material : HSS

Series : Jobber Series

Angle Point : 118°

Explore other Variants (20)

Previous Next

Page 1 of 75 results