• Home /
• All Brands /
• Ultron

Have a question? Call us now at +91 9650660070

Ultron Products Online

Showing 40 out of 65 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 10 days

Ultron UMHM - 05 0.5 HP Single Phase Openwell Submersible Pump

By Ultron

₹6,017  

Ultron Submersible Pump 0.5 HP is a water pump that is placed in the body of water you are trying to clean. It has an intake tube that dips into the water and suctions up debris. The debris travels through the tube and is deposited into a basket or bucket. The main purpose of a submersible pump is to remove debris from the bottom of lakes, ponds, rivers, and other bodies of water. They are most effective when used to remove silt and mud that accumulates on the bottom of bodies of water. They are not useful for removing floating particles like algae, leaves, or bacteria. Submersible pumps are also effective at removing unwanted fish from lakes and ponds. This is done by placing large PVC pipes at various points around your lake or pond. The pipe has one end submerged in the water and the other end at the surface where it connects to the pump so that water can be pumped into the pipe. When fish swim through these pipes it is possible to remove them from your pond or lake. Submersible pumps tend to be more expensive than standard pumps but they do offer some advantages. One advantage is that they have been designed specifically for use in bodies of water, so they are much more likely to last longer.

Add to Cart Buy Now

Ships within 11 days

Ultron 5HP V4 Three Phase Submersible Pump 20 Stage UMD - 1020

By Ultron

₹20,059  

Ultron 5HP V4 Three Phase Submersible Pump 20 Stage UMD - 1020 The Ultron Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors. The pump sets have been designed with easy installation features to make them easier to install in any type of location.  Ultron is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron has a ceramic shaft that ensures wear-and-tear resistance and superior performance. Ultron is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron 5HP V4 Three Phase Submersible Pump 30 Stage UMD - 530

By Ultron

₹20,059   ₹20,508

You save ₹449!

2.19% OFF

Ultron 5HP V4 Three Phase Submersible Pump 30 Stage UMD - 530 The Ultron Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors. The pump sets have been designed with easy installation features to make them easier to install in any type of location.  Ultron is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron has a ceramic shaft that ensures wear-and-tear resistance and superior performance. Ultron is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 25 Stage UMD - 525

By Ultron

₹18,879   ₹20,921

You save ₹2,042!

9.76% OFF

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 25 Stage UMD - 525 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron 5HP V4 Three Phase Submersible Pump 15 Stage UMD - 1215

By Ultron

₹20,059  

Ultron 5HP V4 Three Phase Submersible Pump 15 Stage UMD - 1215 The Ultron Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors. The pump sets have been designed with easy installation features to make them easier to install in any type of location.  Ultron is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron has a ceramic shaft that ensures wear-and-tear resistance and superior performance. Ultron is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron V4 UMD Standard 1HP Submersible Pump Sets 4 Stage UM - 124

By Ultron

₹11,563   ₹12,877

You save ₹1,314!

10.21% OFF

Ultron V4 UMD Standard 1HP Submersible Pump Sets 4 Stage UM - 124 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 20 Stage UMD - 720

By Ultron

₹17,699   ₹20,473

You save ₹2,774!

13.55% OFF

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 20 Stage UMD - 720 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128

By Ultron

₹15,339   ₹17,586

You save ₹2,247!

12.77% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 35 Stage UMD - 235

By Ultron

₹18,879   ₹21,645

You save ₹2,766!

12.78% OFF

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 35 Stage UMD - 235 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 12 Stage UMD - 1212

By Ultron

₹18,879   ₹21,509

You save ₹2,630!

12.23% OFF

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 12 Stage UMD - 1212 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135

By Ultron

₹18,879   ₹20,632

You save ₹1,753!

8.5% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron 5HP V4 Three Phase Submersible Pump 40 Stage UMD - 440

By Ultron

₹21,239   ₹21,370

You save ₹131!

0.61% OFF

Ultron 5HP V4 Three Phase Submersible Pump 40 Stage UMD - 440 The Ultron Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors. The pump sets have been designed with easy installation features to make them easier to install in any type of location.  Ultron is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron has a ceramic shaft that ensures wear-and-tear resistance and superior performance. Ultron is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420

By Ultron

₹16,519   ₹18,856

You save ₹2,337!

12.4% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron 5HP V4 Three Phase Submersible Pump 25 Stage UMD - 725

By Ultron

₹21,239  

Ultron 5HP V4 Three Phase Submersible Pump 25 Stage UMD - 725 The Ultron Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors. The pump sets have been designed with easy installation features to make them easier to install in any type of location.  Ultron is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron has a ceramic shaft that ensures wear-and-tear resistance and superior performance. Ultron is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 15 Stage UMD - 1015

By Ultron

₹20,059   ₹22,008

You save ₹1,949!

8.86% OFF

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 15 Stage UMD - 1015 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 30 Stage UMD - 430

By Ultron

₹20,059   ₹23,147

You save ₹3,088!

13.34% OFF

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 30 Stage UMD - 430 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132

By Ultron

₹17,699   ₹20,268

You save ₹2,569!

12.67% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron V4 UMD Standard 0.5HP Submersible Pump Sets 10 Stage UM - 110

By Ultron

₹10,147   ₹11,117

You save ₹970!

8.72% OFF

Ultron V4 UMD Standard 0.5HP Submersible Pump Sets 10 Stage UM - 110 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 12 Stage UMD - 1212

By Ultron

₹16,519   ₹19,615

You save ₹3,096!

15.78% OFF

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 12 Stage UMD - 1212 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron V4 UMD Standard 0.5HP Submersible Pump Sets 5 Stage UM - 45

By Ultron

₹9,557   ₹10,550

You save ₹993!

9.42% OFF

Ultron V4 UMD Standard 0.5HP Submersible Pump Sets 5 Stage UM - 45 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 15 Stage UMD - 1015

By Ultron

₹17,699   ₹20,101

You save ₹2,402!

11.95% OFF

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 15 Stage UMD - 1015 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 30 Stage UMD - 430

By Ultron

₹20,059   ₹21,202

You save ₹1,143!

5.39% OFF

Ultron Three Phase V4 Standard 3HP Submersible Pump Sets 30 Stage UMD - 430 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 20 Stage UMD - 720

By Ultron

₹20,059   ₹22,398

You save ₹2,339!

10.44% OFF

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 20 Stage UMD - 720 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 25 Stage UMD - 525

By Ultron

₹20,059   ₹22,860

You save ₹2,801!

12.25% OFF

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 25 Stage UMD - 525 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 10 days

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 35 Stage UMD - 235

By Ultron

₹21,239   ₹23,612

You save ₹2,373!

10.05% OFF

Ultron Single Phase V4 Standard 3HP Submersible Pump Sets 35 Stage UMD - 235 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010

By Ultron

₹16,519   ₹17,902

You save ₹1,383!

7.72% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712

By Ultron

₹16,519   ₹17,969

You save ₹1,450!

8.07% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515

By Ultron

₹16,519   ₹18,250

You save ₹1,731!

9.48% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222

By Ultron

₹16,519   ₹18,866

You save ₹2,347!

12.44% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225

By Ultron

₹17,699   ₹19,288

You save ₹1,589!

8.24% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 30 Stage UMD - 130

By Ultron

₹17,699   ₹19,895

You save ₹2,196!

11.04% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 30 Stage UMD - 130 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132

By Ultron

₹17,699   ₹20,268

You save ₹2,569!

12.67% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135

By Ultron

₹18,879   ₹20,632

You save ₹1,753!

8.5% OFF

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128

By Ultron

₹15,339   ₹17,586

You save ₹2,247!

12.77% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010

By Ultron

₹16,519   ₹17,902

You save ₹1,383!

7.72% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712

By Ultron

₹16,519   ₹17,969

You save ₹1,450!

8.07% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515

By Ultron

₹16,519   ₹18,250

You save ₹1,731!

9.48% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420

By Ultron

₹16,519   ₹18,856

You save ₹2,337!

12.4% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222

By Ultron

₹16,519   ₹18,866

You save ₹2,347!

12.44% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225

By Ultron

₹17,699   ₹19,288

You save ₹1,589!

8.24% OFF

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Previous Next

Page 1 of 2 results