VERSIL

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F9 is developed for water pumping applications that integrate solar energy with submersible equipment. As part of the Solar Submersible Pumps category, this model is identified by its stainless steel construction and three-phase electrical design. Its submerged operating format makes it suitable for compatible borewell systems where groundwater needs to be conveyed to the surface for storage or distribution. The stainless steel body specifies the material used in the pump's construction, while the F9 model reference distinguishes it from other configurations in the VERSIL range. These product characteristics are relevant when assessing equipment for solar-based water extraction, particularly in installations where the water source, mounting conditions, and electrical setup influence pump selection.The VERSIL Three phase Solar Submersible Pump Stainless Steel, F9 is relevant to suitable irrigation networks, agricultural water management, and groundwater supply installations. Its three-phase electrical configuration forms an essential part of determining compatibility with the selected solar pumping arrangement and associated control equipment. The submersible design allows the unit to be positioned within an appropriate water source, supporting transfer towards connected delivery lines or collection tanks. Its stainless steel construction also provides a clear material specification for identifying and comparing products within the same category. With its F9 model designation, solar-powered application, and three-phase design, this VERSIL pump offers a distinct product configuration for installations requiring compatible solar submersible pumping equipment.

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F17 is developed for groundwater extraction systems that use solar energy to operate submersible pumping equipment. Listed under the Solar Submersible Pumps category, this model features a three-phase electrical configuration and stainless steel construction, distinguishing it from single-phase alternatives. Its submerged installation design supports water lifting from borewells and other suitable underground water sources, depending on installation requirements. The F17 model identification helps differentiate this unit within the VERSIL pump range. By combining solar-powered operation with a three-phase configuration, the pump is intended for compatible solar pumping arrangements where the electrical setup, water source and operating requirements are aligned with the equipment specifications.Built around the functional requirements of submersible water pumping, the VERSIL Three phase Solar Submersible Pump Stainless Steel, F17 incorporates stainless steel as a key construction material for equipment operating in water environments. Its three-phase specification is relevant to solar installations designed to support compatible three-phase pumping equipment through an appropriate power system. Potential application areas include agricultural irrigation, borewell water extraction and other groundwater transfer tasks suited to the pump's technical capacity. The submersible format keeps the pumping unit below the water level during operation, while the solar-compatible design connects it with renewable-energy-based water management systems. Together, these product characteristics define the F17 as a VERSIL solar submersible pumping solution for installations requiring three-phase operation.

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F30 is designed for water extraction from borewells and other suitable water sources using solar-powered pumping systems. Falling under the Solar Submersible Pumps category, this VERSIL model combines a stainless steel construction with a three-phase configuration to support water transfer in applications where conventional power access may be limited. Its submersible design allows the pump to operate below the water surface, making it suitable for installations that require water lifting from underground sources. The stainless steel body provides a practical construction choice for equipment exposed to water during regular pumping operations. The F30 model designation helps distinguish this pump within the product range for identification and catalogue management.The VERSIL Three phase Solar Submersible Pump Stainless Steel, F30 is relevant for solar-based water management setups in agricultural, rural, and other appropriate water supply environments. Its three-phase configuration is an important specification when assessing compatibility with the associated solar pumping arrangement and electrical system. The submersible format supports borewell installations where water needs to be lifted from depth and directed towards designated storage or distribution points. The stainless steel exterior also contributes to the pump's structural design for use in water-related applications. When evaluating this Solar Submersible Pump, the F30 model identification, three-phase operation, and stainless steel construction are key product characteristics for distinguishing it from other pump configurations within the VERSIL range.

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F60 is designed for solar-powered water extraction systems that require submersible pumping equipment. Belonging to the Solar Submersible Pumps category, this model features a stainless steel construction and a three-phase electrical configuration. Its submerged operating arrangement makes it suitable for compatible borewell installations where water needs to be lifted from underground levels. The stainless steel body defines an important aspect of the pump's material composition for water-handling applications. With the F60 model designation, the product can be identified separately within the VERSIL range, helping distinguish its configuration during equipment selection and catalogue evaluation. Its combination of solar-based operation and submersible design makes it relevant to water supply setups planned around suitable solar power infrastructure.The VERSIL Three phase Solar Submersible Pump Stainless Steel, F60 is applicable to appropriate agricultural irrigation systems, rural water supply installations, and other settings requiring groundwater transfer. Its three-phase configuration is a key consideration when determining compatibility with the solar pumping system, controller, and electrical connections used in an installation. The submersible format supports water movement from a submerged position towards designated storage facilities or distribution networks. Meanwhile, the stainless steel construction provides a clear material specification for comparing this pump with alternatives in the same equipment category. The F60 designation, three-phase operation, and stainless steel body establish the principal identifying features of this VERSIL solar submersible pump without assuming unverified performance ratings or technical capacities.

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F30 is designed for water extraction from borewells and other suitable water sources using solar-powered pumping systems. Falling under the Solar Submersible Pumps category, this VERSIL model combines a stainless steel construction with a three-phase configuration to support water transfer in applications where conventional power access may be limited. Its submersible design allows the pump to operate below the water surface, making it suitable for installations that require water lifting from underground sources. The stainless steel body provides a practical construction choice for equipment exposed to water during regular pumping operations. The F30 model designation helps distinguish this pump within the product range for identification and catalogue management.The VERSIL Three phase Solar Submersible Pump Stainless Steel, F30 is relevant for solar-based water management setups in agricultural, rural, and other appropriate water supply environments. Its three-phase configuration is an important specification when assessing compatibility with the associated solar pumping arrangement and electrical system. The submersible format supports borewell installations where water needs to be lifted from depth and directed towards designated storage or distribution points. The stainless steel exterior also contributes to the pump's structural design for use in water-related applications. When evaluating this Solar Submersible Pump, the F30 model identification, three-phase operation, and stainless steel construction are key product characteristics for distinguishing it from other pump configurations within the VERSIL range.

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F5 is intended for water pumping installations that utilise solar energy to operate submersible equipment. Listed under the Solar Submersible Pumps category, this VERSIL model features a stainless steel body and a three-phase electrical configuration. Its below-water installation design makes it relevant for extracting water from compatible borewells and other suitable underground sources. The stainless steel construction is a defining material characteristic, while the F5 model designation helps differentiate this unit from other products in the same range. Designed around solar-powered pumping requirements, the pump is relevant to water management systems where the source, installation depth, and electrical arrangement determine the selection of appropriate equipment.The VERSIL Three phase Solar Submersible Pump Stainless Steel, F5 can be used in suitable agricultural water supply systems, rural installations, and other applications requiring water transfer from underground sources. Its three-phase specification is particularly relevant when matching the pump to a compatible solar power system and associated electrical components. The submersible format supports installations where water must be raised from below ground level and conveyed to a storage tank or distribution point. The stainless steel exterior identifies the pump's construction material for product evaluation and catalogue comparison. Combining the F5 model designation with three-phase operation and solar-powered functionality, this pump represents a specific option within the VERSIL range of solar submersible pumping equipment.

The VERSIL Three phase Solar Submersible Pump Stainless Steel, F8 is designed for groundwater extraction in installations that utilise solar energy for pumping operations. Classified under the Solar Submersible Pumps category, this model brings together a stainless steel body, a three-phase electrical configuration, and a submersible design. It is intended for compatible water sources where the pump operates below the water surface to move water towards the required outlet. The stainless steel construction is a notable product feature for equipment used in water-handling environments, while the F8 designation identifies the specific model within the VERSIL portfolio. These characteristics make the pump relevant to solar-powered water systems where installation conditions and electrical compatibility are important considerations.The VERSIL Three phase Solar Submersible Pump Stainless Steel, F8 can serve suitable applications involving agricultural water distribution, borewell pumping, and groundwater supply. Its three-phase design is relevant when selecting equipment for a compatible solar pumping arrangement, including the necessary controller and electrical connections. Once installed according to system requirements, its submersible format allows water to be drawn from below ground level and directed towards designated collection or distribution points. The stainless steel body provides a clear material specification for product identification and comparison within the pump category. For catalogue evaluation, the F8 model reference, three-phase configuration, solar-powered operation, and stainless steel construction distinguish this VERSIL pump from other submersible pumping options.

The VERSIL Single phase Solar Submersible Pump Stainless Steel, F3 is designed for groundwater pumping systems that harness solar energy for water extraction. Classified under the Solar Submersible Pumps category, this model combines a single-phase electrical configuration with stainless steel construction in a submersible pump design. The F3 model designation distinguishes it within the VERSIL product range and supports accurate identification during catalogue selection and equipment evaluation. Intended for installation below the water surface, the pump is suited to compatible borewell and groundwater applications where the required pumping conditions match its specifications. Its solar-powered operating concept makes it relevant to water management setups that utilise photovoltaic energy, linking groundwater access with a renewable source of electrical power.With its focus on practical water transfer, the VERSIL Single phase Solar Submersible Pump Stainless Steel, F3 is relevant to agricultural irrigation and other suitable water extraction requirements. The stainless steel construction forms an important part of the pump's physical design, while the single-phase specification identifies its electrical arrangement for compatible solar pumping systems. Its submerged operating format differentiates it from surface-mounted pumping equipment and supports installations where water must be lifted from an underground source. The F3 designation also helps distinguish this model from other variants in the VERSIL Solar Submersible Pumps range. Product selection and installation depend on the pump's rated capacity, head requirements, power compatibility and site conditions.

The VERSIL Single phase Solar Submersible Pump Stainless Steel, F5 is designed for water lifting applications that use solar energy as the primary power source. Categorised under Solar Submersible Pumps, this model features a stainless steel construction and a single-phase configuration, making these specifications central to identifying its intended installation requirements. Its submersible design enables placement below the water level, supporting water extraction from suitable borewells and other compatible sources. The stainless steel exterior forms part of the pump's construction and is relevant for equipment used in regular water handling environments. With its F5 model designation, this VERSIL pump can be distinguished from other models in the range when reviewing product specifications for solar-powered water pumping systems.The VERSIL Single phase Solar Submersible Pump Stainless Steel, F5 is suited to solar water pumping setups where the selected pump must correspond with the available electrical arrangement and water extraction needs. It can be considered for appropriate agricultural, rural, and general water supply applications that require water to be transferred from an underground source to a designated outlet or storage point. The single-phase specification is an important factor when determining system compatibility, while the stainless steel construction identifies its material design. Its compact product identity within the VERSIL Solar Submersible Pumps category supports straightforward catalogue identification and comparison with other submersible pump variants. The F5 designation, solar-powered operation, and stainless steel body define the key characteristics of this product.

The VERSIL Single phase Solar Submersible Pump Stainless Steel, F9 is designed for water extraction systems that use solar energy to power submersible pumping equipment. Categorised under Solar Submersible Pumps, this model features a stainless steel body and a single-phase electrical configuration. Its submerged installation style is suitable for compatible borewell and underground water applications where water must be raised to ground level for further use. The stainless steel construction defines the pump's material composition, making it a distinct option within the VERSIL product range. The F9 model identifier helps users differentiate this unit when reviewing pump specifications for solar-powered installations. Its combination of single-phase operation and submersible design makes it relevant to water management systems planned around suitable solar power arrangements.The VERSIL Single phase Solar Submersible Pump Stainless Steel, F9 is relevant to appropriate irrigation setups, rural water supply systems, and other applications involving groundwater movement. Its single-phase configuration is an important factor when matching the pump with the electrical components and solar pumping system required for installation. The submersible arrangement supports water transfer from a suitable submerged source to storage tanks, collection points, or distribution lines. In addition, the stainless steel body provides a specific material detail for catalogue classification and product comparison. The F9 designation, single-phase electrical design, and solar-powered application establish the main identifying characteristics of this VERSIL pump within the Solar Submersible Pumps category.

The VERSIL Single phase Solar Submersible Pump Stainless Steel, F17 is designed for water pumping applications that utilise solar energy as a power source. Categorised under Solar Submersible Pumps, this VERSIL model combines a single-phase configuration with stainless steel construction to support water movement from underground sources. Its submersible design allows the pump to operate while positioned beneath the water surface, making it suitable for installations where conventional surface pumps may not be appropriate. The F17 model designation helps identify the specific pump variant during product selection and equipment classification. Its solar-powered operating concept makes it relevant to water supply arrangements that incorporate solar energy systems, particularly in locations where access to conventional electricity may be limited.The VERSIL Single phase Solar Submersible Pump Stainless Steel, F17 serves as a pumping component for applications requiring the extraction and transfer of groundwater. Stainless steel construction is a key feature of its design, providing a metal structure suited to submersible equipment used in water-related environments. The single-phase specification distinguishes its electrical configuration, while its solar compatibility aligns it with renewable-energy-based pumping setups. This combination of construction material, power arrangement and submersible operation defines the product's core characteristics for agricultural water supply, irrigation systems and other suitable groundwater pumping requirements. The VERSIL solar submersible pump is identified by its F17 model designation, helping distinguish it within the Solar Submersible Pumps category for catalogue identification and technical product comparison.

The VERSIL Single phase Solar Submersible Pump Stainless Steel, F30 is designed for water extraction tasks using solar-powered pumping systems. Belonging to the Solar Submersible Pumps category, this model features a single-phase electrical arrangement and stainless steel construction, making these specifications central to its product identity. Its submersible configuration is intended for placement beneath the water level, allowing it to serve suitable borewell and groundwater installations. The F30 model code helps distinguish this pump from other products in the VERSIL range and supports accurate identification in equipment catalogues. By integrating a solar-compatible design with a stainless steel pump structure, the unit is intended for water supply setups that rely on solar energy and require an appropriately matched submersible pumping solution.For agricultural and groundwater management applications, the VERSIL Single phase Solar Submersible Pump Stainless Steel, F30 represents a pumping option for transferring water from underground sources to designated supply points. Its stainless steel construction is a defining material feature, while the single-phase configuration identifies the electrical system type for which the pump is designed. Solar operation connects the equipment with photovoltaic-powered installations, subject to compatible system specifications. The submerged arrangement makes it distinct from conventional surface pumps and relevant to installations where water is drawn from below ground. Pump suitability depends on factors such as borewell dimensions, required discharge, pumping head and electrical compatibility, ensuring the F30 model is assessed according to the demands of its intended application.

The VERSIL 5 HP Single phase Stainless Steel Solar Submersible Pump, F60-02 is a cutting-edge and eco-friendly solution for extracting water from wells, boreholes, ponds, or other water sources using the power of the sun. This innovative technology combines solar panels and a submersible pump into a single system to provide a reliable and sustainable water supply, especially in remote or off-grid areas. At the heart of the solar submersible pump system are the solar panels. These panels are designed to capture sunlight and convert it into electrical energy through photovoltaic cells. The generated electricity is then used to power the submersible pump, which is submerged in the water source. One of the key advantages of a solar submersible pump is its energy efficiency and sustainability. It operates silently and produces no greenhouse gas emissions, making it an environmentally friendly alternative to traditional fuel-powered pumps. Additionally, it significantly reduces electricity costs since it relies on solar energy, which is free and renewable. Installation and maintenance of solar submersible pumps are relatively straightforward. The system is designed to be durable and reliable, requiring minimal attention once installed. Regular maintenance typically involves cleaning the solar panels and ensuring the pump's mechanical components are in good working condition. These pumps are versatile and can be used for a variety of applications, including agricultural irrigation, livestock watering, residential water supply, and even in developing communities where access to electricity is limited. Furthermore, solar submersible pumps offer a solution to water scarcity and energy challenges in many parts of the world. They provide a consistent and sustainable water source, which can be crucial for agricultural productivity, household water supply, and overall community development. In summary, a solar submersible pump is a forward-thinking technology that harnesses solar energy to provide a reliable and eco-friendly water pumping solution. Its ability to operate in remote areas and its low maintenance requirements make it an ideal choice for sustainable water supply needs, promoting self-sufficiency and environmental responsibility.
Features:-
1- High quality modular pump design with stainless steel impellers / bowls.
2- High-grade stainless steel structure gives maximum reliability.
3- The pump is made of stainless steel sheet metal, it offers low friction loss, high pump overall efficiency and low operating cost.
4 -The pumps are equipped with a reliable non-return valve to reduce water hammer.
5- All Pumps are equipped with replaceable stainless steel wear rings on the impeller.
9- Wide range of pumps to get with different duty points.
10- Rust free

The VERSIL 1 HP Single phase Stainless Steel Solar Submersible Pump, F8-05 is a cutting-edge and eco-friendly solution for extracting water from wells, boreholes, ponds, or other water sources using the power of the sun. This innovative technology combines solar panels and a submersible pump into a single system to provide a reliable and sustainable water supply, especially in remote or off-grid areas. At the heart of the solar submersible pump system are the solar panels. These panels are designed to capture sunlight and convert it into electrical energy through photovoltaic cells. The generated electricity is then used to power the submersible pump, which is submerged in the water source. One of the key advantages of a solar submersible pump is its energy efficiency and sustainability. It operates silently and produces no greenhouse gas emissions, making it an environmentally friendly alternative to traditional fuel-powered pumps. Additionally, it significantly reduces electricity costs since it relies on solar energy, which is free and renewable. Installation and maintenance of solar submersible pumps are relatively straightforward. The system is designed to be durable and reliable, requiring minimal attention once installed. Regular maintenance typically involves cleaning the solar panels and ensuring the pump's mechanical components are in good working condition. These pumps are versatile and can be used for a variety of applications, including agricultural irrigation, livestock watering, residential water supply, and even in developing communities where access to electricity is limited. Furthermore, solar submersible pumps offer a solution to water scarcity and energy challenges in many parts of the world. They provide a consistent and sustainable water source, which can be crucial for agricultural productivity, household water supply, and overall community development. In summary, a solar submersible pump is a forward-thinking technology that harnesses solar energy to provide a reliable and eco-friendly water pumping solution. Its ability to operate in remote areas and its low maintenance requirements make it an ideal choice for sustainable water supply needs, promoting self-sufficiency and environmental responsibility.
Features:-
1- High quality modular pump design with stainless steel impellers / bowls.
2- High-grade stainless steel structure gives maximum reliability.
3- The pump is made of stainless steel sheet metal, it offers low friction loss, high pump overall efficiency and low operating cost.
4 -The pumps are equipped with a reliable non-return valve to reduce water hammer.
5- All Pumps are equipped with replaceable stainless steel wear rings on the impeller.
9- Wide range of pumps to get with different duty points.
10- Rust free