• Home /
• Hydraulics and Pneumatics /
• Air Compressors and Accessories /
• Compressor Spares /
• Pneumatic Accessories

Have a question? Call us now at +91 9650660070

Pneumatic Accessories

Showing 40 out of 569 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 4 days

BLUEX 2 HP Casting With Copper Motor For Oil Free Air Compressor

By BLUEX

₹23,599  

BLUEX 2 HP Casting With Copper Motor For Oil Free Air Compressor An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 4 days

BLUEX 0.75 HP Casting With Copper Motor For Oil Free Air Compressor

By BLUEX

₹9,820  

BLUEX 0.75 HP Casting With Copper Motor For Oil Free Air Compressor An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 4 days

BLUEX 1.5 HP Casting With Copper Motor For Oil Free Air Compressor

By BLUEX

₹20,059  

BLUEX 1.5 HP Casting With Copper Motor For Oil Free Air Compressor An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 4 days

BLUEX 1 HP Casting With Copper Motor For Oil Free Air Compressor

By BLUEX

₹10,650  

BLUEX 1 HP Casting With Copper Motor For Oil Free Air Compressor An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Related Searches

airtac pneumatic accessories

festo pneumatic accessories

smc pneumatic accessories

monotaro pneumatic accessories

pisco pneumatic accessories

Ships within 5 days

BLUEX 2 HP Motor for Oil Free Air Compressor, BEI - 10004

By BLUEX

₹23,599  

Bluex 2 HP Motor for Oil Free Air Compressor, BEI - 10004 An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 5 days

BLUEX 1.5 HP Motor for Oil Free Air Compressor, BEI - 10003

By BLUEX

₹20,059  

Bluex 1.5 HP Motor for Oil Free Air Compressor, BEI - 10003 An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 5 days

BLUEX 1 HP Motor for Oil Free Air Compressor, BEI - 10002

By BLUEX

₹14,159  

Bluex 1 HP Motor for Oil Free Air Compressor, BEI - 10002 An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 5 days

BLUEX 0.75 HP Motor for Oil Free Air Compressor, BEI - 10018

By BLUEX

₹10,383  

Bluex 0.75 HP Motor for Oil Free Air Compressor, BEI - 10018 An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 5 days

BLUEX 0.75 HP Motor for Oil Free Air Compressor, BEI - 10001

By BLUEX

₹11,091  

Bluex 0.75 HP Motor for Oil Free Air Compressor, BEI - 10001 An air compressor motor is the electrical component responsible for driving the operation of an air compressor. It converts electrical energy into mechanical energy that powers the compressor's pump or unit. The motor is a critical component of the air compressor, and its performance directly impacts its efficiency and functionality. Electric Motors: The most common type of motor used in air compressors is the electric motor. Electric motors can be single-phase or three-phase, depending on the power supply and the compressor's size and capacity. Gasoline or Diesel Engines: In portable and mobile air compressors, you may find gasoline or diesel engines that power the compressor. These engines provide the mobility needed for remote or on-site applications. Horsepower (HP): The motor's horsepower rating indicates its power output and capacity to drive the compressor. The HP requirement varies based on the compressor's size and intended use. Phase: Electric motors can be single-phase or three-phase. The choice depends on the electrical supply and the compressor's power requirements. RPM (Revolutions per Minute): The motor's RPM indicates its rotational speed. Compressor motors are typically designed for specific RPMs to achieve the desired compression ratio. Air compressor motors are often designed with particular enclosures to protect them from environmental factors. Standard sections include open drip-proof (ODP), totally enclosed fan-cooled (TEFC), and explosion-proof (XP) enclosures. Motor Mounting: Motor mounting refers to how the motor is physically attached to the compressor unit. Standard mounting methods include direct drive, belt drive, and base-mounted configurations. Maintenance and Lubrication: Proper motor maintenance is essential for longevity and performance. This includes checking and maintaining lubrication (if applicable), inspecting and tightening electrical connections, and cleaning the motor and surrounding components. Safety Precautions: When working with air compressor motors, safety precautions should be followed, such as disconnecting power sources during maintenance, ensuring proper grounding, and using appropriate personal protective equipment (PPE). Motor Selection: Choosing the correct motor for an air compressor involves considering factors such as the compressor's size, intended use, power supply, and motor specifications to ensure compatibility and optimal performance.

Add to Cart Buy Now

Ships within 5 days

CKD 12.7 mm (1/2 Inch) Port Size Polyamide Resins Bowl Guard for F4000-15-W Air Filter

By CKD

₹329   ₹342

You save ₹13!

3.8% OFF

The CKD Polyamide Resins Bowl Guard, meticulously crafted to enhance the performance and longevity of your F4000-15-W 1/2 Inch Air Filter. Engineered with precision and durability in mind, this bowl guard is the epitome of quality and innovation.Crafted from premium polyamide resins, this bowl guard offers unparalleled strength and resilience, ensuring superior protection for your air filter. Its robust construction shields your filter from potential damage, extending its lifespan and optimizing its efficiency.Designed to seamlessly integrate with the F4000-15-W 1/2 Inch Air Filter, installation is effortless, saving you time and hassle. With its precision-engineered fit, you can trust that this bowl guard will provide a secure and reliable barrier, safeguarding your filter with every use.The transparent design of the polyamide resins offers a clear view of the filtration process, allowing you to easily monitor the condition of your filter and make timely replacements when needed. Say goodbye to guesswork and hello to efficiency with our CKD Polyamide Resins Bowl Guard.Not only does our bowl guard deliver exceptional functionality, but it also adds a touch of sophistication to your air filtration system. Its sleek and modern design enhances the aesthetics of your equipment, elevating the overall look of your workspace.Invest in quality, reliability, and performance with our CKD Polyamide Resins Bowl Guard for the F4000-15-W 1/2 Inch Air Filter. Engineered to exceed expectations, this bowl guard is the perfect choice for professionals who demand nothing but the best for their filtration needs.

Add to Cart Buy Now

Ships within 3 days

Hydint 110 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Water Media

By Hydint

₹766  

The Hydint 110 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 110 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Water Media

By Hydint

₹636  

The Hydint 110 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 240 V DC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Water Media

By Hydint

₹766  

The Hydint 240 V DC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 240 V DC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Water Media

By Hydint

₹636  

The Hydint 240 V DC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 240 V DC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Water Media

By Hydint

₹483  

The Hydint 240 V DC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 230 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Water Media

By Hydint

₹766  

The Hydint 230 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 230 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Water Media

By Hydint

₹636  

The Hydint 230 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 230 V AC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Water Media

By Hydint

₹483  

The Hydint 230 V AC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 5 days

Hydint 230 V AC Diaphragm Suitable for 3/4 inch 2W200-20 Solenoid Valve Water Media

By Hydint

₹1,887  

The Hydint 230 V AC Diaphragm Suitable for 3/4 inch 2W200-20 Solenoid Valve Water Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 110 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Air Media

By Hydint

₹766  

The Hydint 110 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 110 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Air Media

By Hydint

₹636  

The Hydint 110 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 110 V AC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Air Media

By Hydint

₹483  

The Hydint 110 V AC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 240 V DC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Air Media

By Hydint

₹766  

The Hydint 240 V DC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 240 V DC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Air Media

By Hydint

₹636  

The Hydint 240 V DC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 240 V DC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Air Media

By Hydint

₹483  

The Hydint 240 V DC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 230 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Air Media

By Hydint

₹766  

The Hydint 230 V AC Diaphragm Suitable for 2 inch 2W500-50 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 230 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Air Media

By Hydint

₹636  

The Hydint 230 V AC Diaphragm Suitable for 1.1/2 inch 2W400-40 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 3 days

Hydint 230 V AC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Air Media

By Hydint

₹483  

The Hydint 230 V AC Diaphragm Suitable for 1.1/4 inch 2W350-32 Solenoid Valve Air Media is a crucial component designed to regulate fluid flow by creating a seal within the valve. This flexible, disc-shaped element is typically made from materials such as rubber, elastomers, or specialized polymers to ensure compatibility with various types of fluids and operating conditions. The diaphragm’s primary function is to separate the fluid medium from the solenoid actuator, thereby ensuring that the electrical and mechanical components of the valve do not come into direct contact with the fluid. When the solenoid coil is energized, it generates a magnetic field that actuates a plunger or armature. This movement either directly or indirectly causes the diaphragm to flex, allowing fluid to pass through or blocking the flow. The diaphragm's ability to respond quickly and accurately to the solenoid’s actuation is critical for the precise control of fluid flow in the system. The design of the diaphragm ensures a tight seal when the valve is in the closed position, preventing any leakage. Additionally, the diaphragm must be durable and resilient to withstand repeated cycles of opening and closing, as well as exposure to potentially harsh chemicals, high temperatures, and varying pressures. Diaphragms are available in various sizes and configurations to match the specifications of different solenoid valves, enabling them to meet diverse industrial requirements. Diaphragms for solenoid valves are used in a wide range of applications, including water and wastewater management, chemical processing, food and beverage production, pharmaceutical manufacturing, and HVAC systems. Their reliability and efficiency make them an essential component in automated fluid control systems, ensuring consistent performance and longevity of the solenoid valve assemblies.

Add to Cart Buy Now

Ships within 4 days

Btali Portable Air Compressor Pump, BT - OFACB

By Btali

₹5,781 - ₹7,433

The Btali Portable Air Compressor Pump, BT - OFACB is designed to deliver efficient and reliable compressed air for a variety of applications. Engineered with oil-free technology, it ensures clean air output while minimizing maintenance requirements and eliminating the need for lubrication. Its compact and portable design allows for easy handling and convenient movement across different work environments, making it suitable for both light-duty and moderate tasks. Constructed for durability and consistent performance, this compressor pump supports stable air pressure delivery for pneumatic tools and general-purpose use. The robust build ensures long-term functionality while maintaining operational efficiency. Suitable for residential, commercial, and workshop settings, it integrates practical design with dependable air compression, supporting smooth and reliable operation over repeated use.

Type of Product : Portable Air Compressor Pump

Voltage : 220 V

Speed : 1400 RPM

Frequency : 50 Hz

Country of Origin : India

Pressure (bar) : 8 Bar

Pressure (PSI) : 115 Psi

Features : Oil Type, Easy Storage, High Speed, Compact Design, Easy Movable, Auto Stop Function.

Explore other Variants (2)

Ships within 4 days

Graco QuikPak Cartridge Repair System Teflon, Leather & Steel, 17H840

By Graco

₹24,000  

The Graco QuikPak Cartridge Repair System (17H840) is an efficient and versatile solution designed for the repair and maintenance of airless sprayers. This system includes a set of high-quality components made from Teflon, leather, and steel, ensuring compatibility with a wide range of sprayer models. The repair cartridges are engineered for easy installation, enabling users to quickly restore the performance of their spray guns or sprayers, minimizing downtime and increasing productivity.This system is ideal for users who need reliable and durable repairs, particularly in demanding environments where airless spray equipment is frequently used. The Teflon components offer superior chemical resistance, while the leather and steel elements provide the necessary strength and durability for optimal sealing and long-lasting operation. Whether for routine maintenance or urgent repairs, the Graco QuikPak Cartridge Repair System (17H840) delivers professional-grade results, ensuring that your airless sprayers continue to perform at their best.

Add to Cart Buy Now

Ships within 4 days

Graco Pump Repair Kit for 695 Electric Airless Sprayer, 248212

By Graco

₹10,501   ₹12,000

You save ₹1,499!

12.49% OFF

The Graco Pump Repair Kit for 695 Electric Airless Sprayer (248212) is a comprehensive solution designed to restore the functionality of your Graco 695 series sprayer. This kit contains all the essential components required to maintain or repair the pump, ensuring smooth operation and extending the life of your equipment. Ideal for both professional contractors and DIY enthusiasts, the kit includes high-quality replacement parts like seals, O-rings, and other critical pump components, all specifically designed to fit the Graco 695 model.Using this repair kit helps to prevent potential downtime by addressing common wear and tear issues, such as leaks or reduced performance due to damaged seals. The parts are engineered for easy installation, so you can quickly get back to work without needing professional assistance. Whether you're dealing with a malfunctioning pump or simply conducting routine maintenance, the Graco 248212 Repair Kit provides a reliable, cost-effective solution to keep your electric airless sprayer operating at peak efficiency.

Add to Cart Buy Now

Ships within 4 days

Graco Manifold Filter Easy Out Pump with 60 Mesh, 244067

By Graco

₹2,005   ₹2,200

You save ₹195!

8.86% OFF

The Graco Manifold Filter Easy Out Pump (244067) is a high-quality filter designed to ensure the smooth operation of airless spray equipment. With a 60 mesh filtration rating, this filter is ideal for capturing debris and particles that could potentially clog or damage the pump system, helping to maintain the efficiency and longevity of your equipment. The Easy Out feature allows for quick and easy removal, making maintenance simple and hassle-free, especially in the midst of long or demanding work sessions.This manifold filter is designed to fit seamlessly into various Graco airless spray systems, providing excellent protection to the pump and ensuring consistent fluid flow. It’s particularly useful for protecting against larger particulates that can cause costly damage or reduce the quality of your spraying job. Whether you're working with paint, coatings, or other materials, the Graco 60 Mesh Filter ensures your system runs at peak performance, reducing the risk of downtime and enhancing the quality of your finish. This durable and efficient filter is an essential component for maintaining the reliability of your airless spray pump.

Add to Cart Buy Now

Ships within 4 days

Graco Pro Guard Airless Painting Spare 10 Amp Current Rating, 24W755

By Graco

₹17,699   ₹18,000

You save ₹301!

1.67% OFF

The Graco Pro Guard Airless Painting Spare (24W755) is a high-performance accessory designed to enhance the functionality and safety of airless painting equipment. With a 10 Amp current rating, it ensures optimal protection for airless sprayers, safeguarding the motor and electrical components from potential damage caused by power surges or electrical faults. This spare is an essential component for maintaining the longevity and reliability of your airless painting equipment, especially in professional or industrial environments where continuous use is expected.Designed for easy installation, the Graco Pro Guard Airless Painting Spare provides an added layer of security, ensuring that your painting process runs smoothly without interruptions. It is built to meet the high standards of Graco products, offering durability and efficiency to professionals who rely on airless spray systems for large-scale applications. Whether used in commercial, residential, or industrial painting jobs, this spare part is essential for maintaining the safety and performance of airless sprayers.

Add to Cart Buy Now

Ships within 4 days

Graco Rax X One Seal Steel, Rubber Material, 246453 (Pack of 5)

By Graco

Pack of 5 piece

₹2,700  

The Graco Rax X One Seal (246453) is a high-quality sealing component designed to ensure the effective operation of Graco equipment, particularly in airless spray systems. Constructed from a combination of steel and rubber, this seal offers exceptional durability, resistance to wear, and long-lasting performance in demanding conditions. It is specifically engineered to maintain a secure seal, preventing leaks and ensuring smooth, consistent spray operations.Ideal for use in professional painting applications, the Graco Rax X One Seal is a critical part for maintaining the integrity and functionality of spray pumps and other related systems. Its robust materials make it suitable for heavy-duty tasks, providing reliable sealing even under high pressure and exposure to various chemicals or coatings. The steel and rubber construction combines strength with flexibility, offering a seal that withstands the rigors of frequent use while maintaining optimal performance throughout its lifespan.

Add to Cart Buy Now

Ships within 4 days

Graco Gun Filter 60 Mesh Size for Contractor PC Spray Gun, Contractor II & FTX, 287032

By Graco

₹1,073   ₹1,600

You save ₹527!

32.94% OFF

The Graco Gun Filter 60 Mesh (287032) is a high-performance filter designed for use with various Graco spray guns, including the Contractor PC Spray Gun, Contractor II Spray Gun, and FTx Spray Gun. With a 60 mesh rating, it efficiently filters out debris and particles that could clog or damage your spray gun, ensuring smooth and uninterrupted spraying. This filter is especially crucial in protecting the delicate components of the spray gun, extending its lifespan and maintaining optimal performance over time.Made from durable materials, the Graco 60 Mesh Gun Filter is easy to install and remove, offering hassle-free maintenance. It helps to maintain consistent paint flow, ensuring a smooth and even finish, whether you're working with paints, coatings, or other materials. This filter is an essential accessory for professionals who rely on Graco spray guns for their projects, offering peace of mind and ensuring high-quality results with minimal downtime. Its compatibility with multiple spray gun models makes it a versatile and valuable tool in your spraying system.

Add to Cart Buy Now

Ships within 5 days

Pilot Oil-Free Air Pump 750 W Copper, PL-750C

By Pilot

₹10,501  

The Pilot Oil-Free Air Pump 750 W Copper, PL-750C by Pilot delivers exceptional performance in the Air Compressors category, designed for precision air delivery across industrial and workshop tasks. Equipped with advanced features such as Oil-Free Air Pump 750 W Copper, PL-750C, it ensures optimal efficiency, durability, and minimal maintenance.Whether for automotive, painting, or general tool operation, Pilot Oil-Free Air Pump 750 W Copper, PL-750C offers quiet operation and consistent airflow. The robust design with Oil-Free Air Pump 750 W Copper, PL-750C exemplifies Pilot's engineering excellence in air compressor technology.

Add to Cart Buy Now

Ships within 5 days

Pilot Oil-Free Air Pump 750 W, PL-750

By Pilot

₹8,259  

The Pilot Oil-Free Air Pump 750 W, PL-750 by Pilot delivers exceptional performance in the Air Compressors category, designed for precision air delivery across industrial and workshop tasks. Equipped with advanced features such as Oil-Free Air Pump 750 W, PL-750, it ensures optimal efficiency, durability, and minimal maintenance.Whether for automotive, painting, or general tool operation, Pilot Oil-Free Air Pump 750 W, PL-750 offers quiet operation and consistent airflow. The robust design with Oil-Free Air Pump 750 W, PL-750 exemplifies Pilot's engineering excellence in air compressor technology.

Add to Cart Buy Now

Ships within 5 days

Pilot Oil-Free Air Pump 550 W Copper, PL-550C

By Pilot

₹8,259  

The Pilot Oil-Free Air Pump 550 W Copper, PL-550C by Pilot delivers exceptional performance in the Air Compressors category, designed for precision air delivery across industrial and workshop tasks. Equipped with advanced features such as Oil-Free Air Pump 550 W Copper, PL-550C, it ensures optimal efficiency, durability, and minimal maintenance.Whether for automotive, painting, or general tool operation, Pilot Oil-Free Air Pump 550 W Copper, PL-550C offers quiet operation and consistent airflow. The robust design with Oil-Free Air Pump 550 W Copper, PL-550C exemplifies Pilot's engineering excellence in air compressor technology.

Add to Cart Buy Now

Ships within 5 days

Pilot Oil-Free Air Pump 550 W, PL-550

By Pilot

₹7,197  

The Pilot Oil-Free Air Pump 550 W, PL-550 by Pilot delivers exceptional performance in the Air Compressors category, designed for precision air delivery across industrial and workshop tasks. Equipped with advanced features such as Oil-Free Air Pump 550 W, PL-550, it ensures optimal efficiency, durability, and minimal maintenance.Whether for automotive, painting, or general tool operation, Pilot Oil-Free Air Pump 550 W, PL-550 offers quiet operation and consistent airflow. The robust design with Oil-Free Air Pump 550 W, PL-550 exemplifies Pilot's engineering excellence in air compressor technology.

Add to Cart Buy Now

Ships within 8 days

GenericAir Oil Seprator for Screw Compressor 30 kW Compressor Power 16 bar Max Pressure, 24121212

By GENERIC

₹4,601  

GENERIC Air Oil Separator Screw Compressor 30 kW 16 Bar, 24121212 is a high-efficiency filtration component designed for heavy-duty rotary screw compressor systems operating at up to 16 bar pressure. Specifically suitable for 30 kW compressors, it ensures effective separation of oil from compressed air, maintaining high air purity and protecting downstream equipment. The advanced filtration media captures fine oil particles while allowing consistent airflow, helping reduce pressure drop and enhance overall system efficiency in demanding industrial environments.GENERIC Air Oil Separator Screw Compressor 30 kW 16 Bar, 24121212 is engineered for durability and long service life under continuous operation. Its robust construction withstands high pressure and temperature conditions, ensuring stable performance over time. The easy-to-install design supports quick maintenance and replacement, minimizing downtime. Ideal for manufacturing units, workshops, and pneumatic systems, it offers a reliable combination of filtration efficiency, performance stability, and extended compressor lifespan.

Add to Cart Buy Now

Previous Next

Page 1 of 15 results