• Home /
• Industrial Automation /
• Robotics

Have a question? Call us now at +91 9650660070

Robotics

Showing 40 out of 1108 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 60 days

TECHDELIVERS Nylon 10 x 4.5 inch 1045 1045R CW CCW Propeller Black for DJI F450 500 F550 FPV Multi-Copter 5 Pair Combo

By TECHDELIVERS

Pack of 10 piece

₹577   ₹699

You save ₹122!

17.45% OFF

The TECHDELIVERS Nylon 10 x 4.5 inch 1045 1045R CW CCW Propeller Black for DJI F450 500 F550 FPV Multi-Copter 5 Pair Combo, a propeller is a type of rotary device that consists of blades mounted around a central hub. When the propeller spins, it generates thrust by creating a difference in air pressure between its front and rear surfaces. This thrust is used to propel aircraft, watercraft, and even some land-based vehicles. Propellers are commonly used in various applications to achieve propulsion and generate movement. Propellers: Blades: The blades of a propeller are designed to generate lift and thrust as they cut through a fluid medium, such as air or water. Hub: The hub is the central part of the propeller that connects the blades. It houses the mechanisms that transmit the rotational force to the blades. Rotation: When the propeller rotates, it pushes against the surrounding fluid (air or water), creating a force in the opposite direction. This force propels the vehicle forward. Pitch: The pitch of a propeller refers to the angle at which the blades are set relative to the hub. It determines how much the propeller "bites" into the fluid and influences the amount of thrust generated. Thrust: The forward force generated by the propeller's rotation is known as thrust. It's the force that moves a vehicle in the desired direction. Applications of Propellers: Aircraft: Propellers are commonly used on small aircraft, such as general aviation planes and some helicopters. They generate the necessary thrust for flight. Boats and Ships: Watercraft, from small boats to large ships, use propellers to move through water efficiently. Propellers for boats are also called marine propellers or boat propellers. Underwater Vehicles: Submarines, remotely operated vehicles (ROVs), and underwater drones use propellers to navigate underwater. Drones: Many drones, especially multirotor drones, use propellers to generate lift and control their movement. Land Vehicles: Some land vehicles, such as hovercraft and certain types of amphibious vehicles, use propellers to move over water or uneven terrain. Fans and Ventilation: Industrial fans and ventilation systems also use propeller-like designs to move air and provide cooling. Overall, propellers are essential components for generating thrust and propulsion in a wide range of vehicles and devices that operate in fluid environments, whether in the air, water, or even on the ground.

Add to Cart Buy Now

Ships within 24 hrs

Invento ISC 235 Small Loudspeaker Stereo Audio Speaker 2040 4Ohm 2W for Laptop DIY Projects Replace

By Invento

₹353   ₹590

You save ₹237!

40.17% OFF

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS Copper Clad Board for PCB making Single Sided, Phenolic

By TECHDELIVERS

₹188 - ₹365

You save ₹1,741!

87.09% OFF

The TECHDELIVERS Copper Clad Board for PCB making is a single-sided phenolic board specifically designed for creating custom printed circuit boards (PCBs) in electronic projects. This type of board is commonly used by hobbyists, electronics enthusiasts, and professionals who need a reliable substrate for assembling and soldering electronic components.The key feature of the TECHDELIVERS Copper Clad Board is its construction using a phenolic resin substrate with a thin layer of copper laminated onto one side. The copper layer serves as the conductive trace material for creating circuit pathways, while the phenolic substrate provides structural support and insulation between the copper traces.One of the advantages of using a single-sided copper clad board is its simplicity and affordability, making it ideal for prototyping and small-scale projects. The single-sided design means that components and traces are only soldered onto one side of the board, simplifying the assembly process and reducing complexity.The copper layer on the board is typically pre-etched with a copper pattern or grid, providing a template for creating custom circuit designs. Users can use etching techniques such as chemical etching or mechanical milling to remove unwanted copper and create the desired circuit layout.The TECHDELIVERS Copper Clad Board is also designed with convenience in mind. It comes in standard sizes and thicknesses, making it compatible with common PCB design software and fabrication techniques. This standardization ensures compatibility with drill sizes, component placements, and soldering processes.

Suitable For : PCB making Single Sided

Type of Product : Copper Clad Board

Material : Phenolic

Care Instructions : Always use mask while cutting PCBs

Explore other Variants (4)

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making

By TECHDELIVERS

₹282   ₹559

You save ₹277!

49.55% OFF

The TECHDELIVERS Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making - 500 g, also known as etchant or etching solution, is a chemical substance used in the process of creating printed circuit boards (PCBs). PCB etching is a method of removing unwanted copper from the surface of a copper-clad PCB substrate to create circuit traces, pads, and other conductive features. PCB Etching Powder: Chemical Composition: PCB etching powder typically consists of a mixture of chemicals that can dissolve or react with copper, effectively etching away the unwanted copper from the substrate. Selective Etching: The etchant selectively removes copper while leaving behind the protective mask that defines the circuit pattern. This allows for precise creation of conductive pathways on the PCB. Etching Process: The PCB is coated with a resist material (such as photoresist) that protects the areas where the circuit traces and pads are intended. The PCB is then submerged or brushed with the etching solution. The etchant removes copper from the exposed areas, leaving the desired circuit pattern. Safety Considerations: PCB etching solutions can contain corrosive and potentially harmful chemicals. Proper safety precautions, such as wearing protective gear and working in a well-ventilated area, are essential when using etchants. Common Types of PCB Etching Solutions: Ferric Chloride (FeCl3): One of the most common etchants, ferric chloride is corrosive and reacts with copper to dissolve it. Cupric Chloride (CuCl2): Cupric chloride is used as an alternative to ferric chloride and offers faster etching times. Ammonium Persulfate (NH4)2S2O8): This etchant is less corrosive compared to ferric chloride and is often used for more delicate applications. Sodium Persulfate (Na2S2O8): Similar to ammonium persulfate, sodium persulfate is a milder etchant suitable for fine-pitch traces and sensitive components. Using PCB Etching Powder: Prepare the PCB: Apply a resist material (photoresist, for example) to the PCB surface. The resist protects the areas you want to keep. Expose the Circuit Pattern: Expose the resist to light or use other methods to create the desired circuit pattern. Develop the Resist: Develop the exposed resist to remove unwanted portions, leaving the circuit pattern intact. Etching: Submerge the PCB in the etching solution. Agitate or brush the solution over the surface to speed up the process. Rinse and Neutralize: Once the desired copper has been etched away, rinse the PCB thoroughly with water to remove any remaining etchant. Neutralize the etchant to make it safe for disposal. Remove the Resist: Strip the remaining resist material from the PCB using appropriate methods.

Add to Cart Buy Now

Ships within 24 hrs

EASY ELECTRONICS Heating Coils Resistor Nichrome Wire for Foam Cutting, 24 SWG (1 m)

By EASY ELECTRONICS

₹93   ₹299

You save ₹206!

68.9% OFF

The Easy Electronics Heating Coils Resistor Nichrome Wire, a reliable and efficient solution for foam cutting and other heating applications. This high-quality wire is designed to provide consistent and controlled heating, making it ideal for both hobbyists and professionals. The Easy Electronics Heating Coils Resistor Nichrome Wire is made from premium-grade nichrome alloy, known for its excellent heating properties and durability. With a wire gauge of 24 SWG (Standard Wire Gauge), this wire offers the perfect balance of strength and flexibility for various applications. Measuring 1 meter in length, this wire provides ample material for creating heating coils for foam cutting or other heating projects. It is specifically designed to generate heat quickly and evenly, allowing for precise and efficient foam cutting without compromising the material's integrity. The Easy Electronics Heating Coils Resistor Nichrome Wire is easy to work with and can be easily shaped into the desired coil configuration. Simply measure and cut the wire to the desired length, and then shape it into the desired coil shape using pliers or a coil winding tool. The wire maintains its shape well and ensures consistent heating performance. This nichrome wire is highly resistant to oxidation and corrosion, ensuring long-lasting performance even under high temperatures. It can withstand the demands of continuous heating without compromising its efficiency or structural integrity. The Easy Electronics Heating Coils Resistor Nichrome Wire and elevate your foam cutting and heating projects to the next level. With its high-quality construction, consistent heating performance, and versatility, this wire is a valuable asset for anyone working with foam or requiring controlled heating applications. Achieve precision and efficiency in your projects with the Easy Electronics Heating Coils Resistor Nichrome Wire.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS PCB Toner Transfer Paper, Glossy Paper Size A4

By TECHDELIVERS

Pack of 50 piece

₹188 - ₹1,651

You save ₹205!

29.33% OFF

TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a specialized printing medium designed for creating high-quality printed circuit board (PCB) layouts with ease and precision. This paper is specifically engineered for use in the toner transfer method, a popular technique used by electronics enthusiasts and professionals for transferring circuit designs onto copper-clad boards.The glossy finish of the paper ensures crisp and clear printing of PCB designs, allowing for intricate details and fine traces to be accurately reproduced. The A4 size is a standard dimension that provides ample space for printing multiple circuit designs on a single sheet, maximizing efficiency and reducing waste during the PCB fabrication process.One of the key advantages of TECHDELIVERS PCB Toner Transfer Paper is its compatibility with laser printers and copiers commonly found in home offices and professional work environments. This compatibility ensures that users can easily print their circuit designs directly onto the transfer paper without the need for specialized printing equipment.The paper's heat-resistant properties are crucial for the toner transfer method, where the printed circuit design is transferred from the paper onto a copper-clad board using heat and pressure. TECHDELIVERS PCB Toner Transfer Paper can withstand the high temperatures required for successful toner transfer, ensuring reliable and consistent results.Moreover, the glossy surface of the paper facilitates smooth toner transfer onto the copper surface of the PCB, minimizing the risk of smudging or smearing during the transfer process. This contributes to the overall quality and accuracy of the transferred circuit pattern, making it easier for users to etch and create functional PCBs.Overall, TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a reliable and efficient solution for creating professional-grade PCB layouts using the toner transfer method. Its compatibility with laser printers, heat-resistant properties, and glossy finish make it an essential tool for electronics enthusiasts, hobbyists, and professionals involved in PCB prototyping and fabrication.

Type of Product : PCB toner transfer paper

Sheet Size : A4

Paper Finish : Glossy

Explore other Variants (9)

Ships within 24 hrs

TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine, 0308YHUZIH7

By TECHDELIVERS

₹329   ₹399

You save ₹70!

17.54% OFF

The TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine refers to a type of electric motor that is connected to a fan blade. The motor's primary purpose is to rotate the fan blade and create airflow or ventilation. This setup is commonly found in various appliances and equipment where cooling or air circulation is essential. Here's how the motor with a fan blade typically works: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. In this context, it's usually an electric motor designed to rotate the fan blade. The motor can be of different types, such as AC (alternating current) or DC (direct current), depending on the application. 2. Fan Blade: The fan blade is a component with curved or angled surfaces that are designed to move air when rotated. The blade is connected to the shaft of the motor, so when the motor spins, it also drives the fan blade to rotate. 3. Housing: The motor and fan blade assembly is usually housed in a protective casing or housing. The housing provides structural support, protection, and helps guide the airflow generated by the rotating fan blade. Applications of motors with fan blades include: 1. Cooling Fans: These are commonly found in electronic devices, computers, laptops, and other equipment to dissipate heat and prevent overheating. 2. HVAC Systems: Heating, Ventilation, and Air Conditioning systems use motors with fan blades to circulate air and maintain indoor comfort. 3. Household Fans: Ceiling fans, pedestal fans, table fans, and other types of fans in households use this configuration for air circulation. 4. Automotive Cooling Fans: In vehicles, motors with fan blades are used in cooling fans for the engine and air conditioning system. 5. Industrial Fans: Large industrial fans used for ventilation, air circulation, and cooling purposes also use this setup. The motor with a fan blade is a practical and efficient way to move air and provide cooling in various applications. The size and power of the motor, as well as the design of the fan blade, are tailored to the specific requirements of the device or system in which it is used.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size, 0624XOJ5C6W

By TECHDELIVERS

Pack of 10 piece

₹176   ₹299

You save ₹123!

41.14% OFF

The TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size . Transfer paper is commonly used in the process of making DIY PCBs at home. The transfer paper method allows you to transfer the circuit design from a printed image onto a copper-clad PCB board, which is then etched to create the desired PCB circuit. Here's a step-by-step guide to the transfer paper method for creating a PCB: Materials Needed:
1. Copper-clad PCB board
2. Circuit design printed on regular paper using a laser printer (mirrored/flipped horizontally)
3. Transfer paper (also known as iron-on transfer paper or toner transfer paper)
4. Iron
5. Etching solution (such as ferric chloride or ammonium persulfate)
6. Plastic container for etching
7. Rubber gloves
8. Fine sandpaper or abrasive pad
9. Safety goggles Steps: 1. Circuit Design: Create or download the desired circuit design using PCB design software. Print the circuit design on regular paper using a laser printer. The design should be mirrored or flipped horizontally, as it will be transferred to the copper side of the PCB. 2. Preparing the Copper Board: Cut the copper-clad PCB board to the desired size for your circuit. Clean the copper surface thoroughly with fine sandpaper or an abrasive pad to remove any oxidation or impurities. 3. Preparing the Transfer Paper: Cut the transfer paper to the size of the PCB board. Place the printed side of the transfer paper (with the circuit design) onto the cleaned copper surface. Ensure that the toner side is in contact with the copper surface. 4. Heat Transfer: Preheat the iron to a medium-high setting (without steam). Place the iron on top of the transfer paper and apply even pressure while moving the iron in a circular motion. Make sure to cover the entire circuit design area. Apply heat for about 2-3 minutes. 5. Cooling and Peeling: Allow the transfer paper to cool down for a few minutes. Once cool, gently peel off the transfer paper. The toner from the paper should now be transferred onto the copper surface. 6. Etching: Wear rubber gloves and safety goggles for this step. Prepare the etching solution in a plastic container according to the manufacturer's instructions. Submerge the copper-clad board with the toner in the etching solution. Agitate the container gently to ensure even etching. The etching process will remove the exposed copper areas, leaving the printed circuit behind.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, 1013UZ7UGG0

By TECHDELIVERS

Bottle of 500 gram

₹270   ₹499

You save ₹229!

45.89% OFF

The TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, a chemical sorcerer in the world of electronics, emerges as a transformative solution that shapes the pathways of innovation. This unassuming concoction wields the power to carve intricate designs onto copper-clad circuit boards, giving birth to the intricate patterns that underlie modern technology. Designed with precision and reactivity, a PCB etching agent performs a delicate dance of chemical reactions. It selectively removes unwanted copper from the surface of a circuit board, leaving behind the pathways that guide electrical currents. It's a conductor of transformation, turning raw copper into meticulously designed circuitry. In the realm of circuit board production, a PCB etching agent is the master of detail, bringing complex designs to life. It transforms flat sheets of copper into functional works of art, connecting components and enabling the flow of information and power that powers our devices. With an eye for precision, a PCB designer employs the etching agent to create connections that dictate the functionality of a circuit. It's a tool that breathes life into the dreams of engineers, artists, and innovators, allowing their visions to materialize as tangible pathways of possibility. Beyond its functional prowess, a PCB etching agent stands as a symbol of controlled creativity. It's the fusion of chemistry and technology, where the controlled application of science yields results that spark progress. In its transformative power, it embodies the essence of design, intricacy, and the ever-evolving journey of human ingenuity. In the realm of innovation, a PCB etching agent is the silent collaborator that forges the connections that drive our digital lives. It's the alchemical blend that turns copper into circuits and circuits into devices, leaving an indelible mark on the tapestry of technology.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque, 1118V43ZQ34

By TECHDELIVERS

₹235   ₹499

You save ₹264!

52.91% OFF

The TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque is a system that combines three main components: a motor, a turbine, and a generator. This setup allows for the conversion of mechanical energy into electrical energy. The process involves using the motor to drive the turbine, which, in turn, rotates the generator to produce electricity. Here's how each component works in the motor turbine generator system: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. It provides the initial rotational force required to drive the turbine. 2. Turbine: The turbine is a machine with blades or buckets that rotate when subjected to a fluid (gas or liquid) flow. In the context of a motor turbine generator, the turbine is connected to the motor's shaft and rotates when the motor is powered on. 3. Generator: The generator is an electrical device that converts mechanical energy (rotational motion) into electrical energy (electricity). As the turbine rotates, it drives the generator, causing the generation of electricity through electromagnetic induction. The motor turbine generator system is commonly used in various applications, such as: 1. Power Plants: In some power plants, particularly in hydroelectric power plants, water turbines are driven by electric motors to generate electricity. 2. Wind Turbines: In wind power systems, the motor is used to initiate the rotation of the turbine, which harnesses the kinetic energy of the wind and drives the generator to produce electrical power. 3. Gas Turbines: In some gas turbine power plants, electric motors are used to start the initial rotation of the gas turbine before it begins generating power on its own. 4. Experimental Setups: Motor turbine generator systems are also used in educational and experimental setups to demonstrate the principles of energy conversion and electrical generation. It's important to note that in many cases, the motor turbine generator system may be a part of a larger complex power generation system. The choice of the motor, turbine, and generator components depends on the specific application, power requirements, and efficiency considerations.

Add to Cart Buy Now

Ships within 24 hrs

AS ONE Neoceram N-11 Type Square Ceramic Glass Plate

By AS ONE

₹3,185 - ₹4,719

The AS ONE Neoceram N-11 Type Square Ceramic Glass Plate, a premium solution for high-temperature applications. Crafted with precision and durability in mind, this square plate is designed to withstand extreme heat and thermal shock. Made from Neoceram N-11 Type ceramic glass, it offers exceptional strength and resilience, making it ideal for use in ovens, stoves, and other heating appliances. With its square shape and precise dimensions, it provides a versatile platform for cooking, baking, or serving food with confidence. Trust AS ONE to provide the reliability and quality you need for your kitchen essentials. Elevate your cooking experience with the Neoceram N-11 Type Square Ceramic Glass Plate today.

Type of Product : Ceramic Glass Plate

Material : Glass

Shape : Square

Type : Neoceram N-11

Explore other Variants (2)

Ships within 24 hrs

AS ONE MPSU Series Stainless Steel Plate (Size 50x100 mm)

By AS ONE

₹2,359 - ₹14,159

The AS ONE MPSU Series Stainless Steel Plate, your ultimate companion for precision machining tasks. Meticulously engineered to meet the highest standards of quality and durability, this plate is crafted from premium stainless steel, ensuring unmatched strength and resilience. Whether you're shaping intricate components or cutting precise designs, this plate delivers consistent, flawless results with ease. Its corrosion-resistant properties make it ideal for a wide range of machining applications, while its sleek design adds a touch of sophistication to your workspace. Trust AS ONE to provide the tools you need to elevate your craftsmanship to new heights. Experience the difference with the MPSU Series Stainless Steel Plate today.

Width : 50 mm

Length : 100 mm

Material : Stainless Steel

Explore other Variants (25)

Ships within 3 days

Invento 2 mm Hole Dia Aluminium Alloy Sheet for DIY Project

By Invento

₹884 - ₹1,887

You save ₹1,417!

42.89% OFF

The Invento 2 mm Hole Diameter Aluminium Alloy Sheet is an essential material for a wide range of DIY projects, offering both durability and versatility. Crafted from high-quality aluminium alloy, this sheet is designed to meet the needs of hobbyists and professionals alike, making it ideal for custom fabrication, crafting, and repair work. With a precise 2 mm hole diameter, the sheet features a series of evenly spaced perforations that enhance its adaptability for various applications. The perforations allow for easy integration with other components, facilitating seamless assembly in projects such as custom enclosures, decorative panels, and ventilation grilles. The aluminium alloy construction provides a strong yet lightweight material, ensuring that the sheet maintains its structural integrity while remaining manageable and easy to work with. The sheet's aluminium alloy composition also offers excellent resistance to corrosion, making it suitable for use in both indoor and outdoor environments. Its smooth surface can be easily painted, anodized, or finished to match aesthetic preferences or functional requirements. Additionally, the material's inherent thermal and electrical conductivity makes it a practical choice for projects involving heat dissipation or electrical components. Whether you're constructing a bespoke piece of furniture, creating custom artwork, or building functional components, the Invento Aluminium Alloy Sheet delivers the quality and performance needed to achieve professional results. Its combination of strength, versatility, and ease of use makes it a valuable addition to any DIY enthusiast's toolkit.

Suitable For : DIY Projects

Type of Product : Aluminium Alloy Sheet

Hole Diameter : 2mm

Material : Aluminium Alloy

Package Contains : 1 pc Aluminium Alloy Sheet

Explore other Variants (2)

Ships within 3 days

Hobbywing XRotor-40A ESC Drone Speed Controller

By Hobbywing

₹3,421  

Hobbywing XRotor-40A ESC is a great item that is made by Hobbywing. The UAV battery is the ideal power solution for all of your applications where performance, endurance, and reliability are critical.Hobbywing XRotor-40A ESC is a popular ESC for the price, but it has some downsides that might make other models better for your needs. It works well for small to medium sized cars, and is capable of handling up to a 2S battery. The throttle curves are available in four different options, but you can only change them with the solderless method.Hobbywing XRotor-40A ESC is the first and only 30A 2-6S BLHeli_S ESC in the market. It's a feature packed, micro sized, light weight, high performance speed controller especially designed for multi-rotor racing drones.The Hobbywing XRotor-40A is based on the latest BLHeli_S firmware (1.16) and uses hardware generated PWM for smooth throttle response. It has DSHOT1200 built in for fast response to fast throttle input signal. The hardware generated PWM signals are also used to increase motor life span and reduce heat buildup. The Hobbywing XRotor-40A ESC comes with a current sensor (0~3.3A) sensor rated at IPEX connector. The high performance MCU of the Hobbywing XRotor-40A can handle all types of flight controllers and it also supports Telemetry which is a must have for racing drone applications.

Add to Cart Buy Now

Ships within 5 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 2200KV BLDC + 30A ESC + 1045 Propellor ISC 830

By Invento

Pack of 1 piece

₹7,079   ₹12,980

You save ₹5,901!

45.46% OFF

Add to Cart Buy Now

Ships within 5 days

Invento 260mA Mini DC Air Pump ISC 1613

By Invento

Pack of 4 piece

₹400 - ₹518

You save ₹308!

37.29% OFF

The Invento 260mA Mini DC Air Pump ISC 1613 is a compact and efficient air pump designed for a variety of applications where space and power constraints are a concern. With a nominal current of 260mA and operating on a DC power supply, this mini air pump provides reliable and consistent air flow in a small, portable package. It is ideal for use in aquariums, small ventilation systems, and other low-power air movement needs. The ISC 1613 features a robust construction that ensures durability and long-term performance. Its compact design makes it suitable for installation in tight spaces where traditional pumps might be too large. Despite its size, the pump delivers a commendable air flow rate, making it a versatile choice for both hobbyist and professional applications. The air pump operates quietly, minimizing noise disruption while providing efficient air circulation. It is easy to install and maintain, with user-friendly connections and minimal maintenance requirements. The device is engineered to handle continuous operation, making it reliable for ongoing use in various environments. The Invento Mini DC Air Pump ISC 1613 is a practical solution for applications requiring a small yet powerful air pump. Its combination of efficiency, durability, and compact size makes it an excellent choice for enhancing air flow in confined spaces and specialized settings.

Flow Rate : 0.3L/min

Voltage : 3V - 6V DC

Type of Product : Mini DC Air Pump

Current : 260mA

Size : 48 x 27 x 12 mm

Pressure : 30KPa

No-Load Testing Paramete : 3v 130ma, 300mmhg

Explore other Variants (3)

Ships within 3 days

Hobbywing Xrotor 20A ESC Drone Speed Controller for UAV

By Hobbywing

₹2,005  

The Hobbywing Xrotor 20A ESC is an affordable, reliable and easy to use electronic speed controller that is perfect for your multi-rotor applications. The Xrotor ESC is small yet powerful, and can handle 2S-4S LiPo batteries without any problems. The Xrotor has a built-in BEC that provides 5V to power the receiver and servos, so there's no need for additional components or wiring for them.The Xrotor 20A ESC is also very easy to program. You can set the desired battery voltage and the number of cells you are using (2S-4S) using dip switches, which means you don't have to go through the hassle of hooking up a computer to reprogram it every time you want to change your battery configuration. The Xrotor ESC also comes with an LED display that shows you the battery voltage under load, so you can keep track of your battery health.The Xrotor 20A ESC can handle up to 3S LiPo/LiFe batteries, and comes with a barrel jack connector for an external BEC. The input voltage range is 6 – 15V, which means it can be powered by 2-3s LiPo, a 3s LiFe battery, or even 4s LiPo with a step down converter.For most applications, an external BEC is not necessary. If you want to use an external BEC though, Hobbywing offers an optional one on their site. The stock BEC will do just fine for powering servos.As far as programming goes, this ESC has all of the features you'd expect from a modern speed controller. There are three timing modes: Multiwii/Airplane mode (1-2ms), Multiwii/Heli mode (2-4ms), and Multiwii/Climb mode (2-7ms). It also has two programmable mixes: one between throttle and pitch channel.

Add to Cart Buy Now

Ships within 3 days

Qurio Reach Robotic DIY Kit for Science Project

By Qurio

₹1,574   ₹1,779

You save ₹205!

11.51% OFF

Qurio Reach is a modular DIY kit designed for beginners, especially children above the age of 8. It provides an opportunity for young learners to engage in hands-on activities and explore the world of robotics and science. Here are some key features and details of the kit:
1. Modular Design: The kit features a modular design, allowing users to build and create over 15 different robot designs. This modularity enables flexibility and creativity in constructing various robotic models.
2. Science Projects: Qurio Reach can be used to create science projects, providing a practical and interactive approach to learning scientific concepts. Through building and experimenting with the kit, children can explore topics such as motion, gears, and mechanical systems.
3. Components: The kit includes several components, such as a geared DC motor, a wired remote control, high impact polystyrene (HIP) structural parts, a set of gears in three different sizes, and other necessary materials. These components form the building blocks for constructing the robot designs.
4. Step-by-Step Guide: A step-by-step guide is provided to assist users in creating 10 specific designs. The guide serves as a tutorial, providing instructions and explanations to support the building process.
5. Android App: The kit also comes with a free Android app that covers a structured syllabus. The app likely provides additional educational content, tutorials, and interactive resources to enhance the learning experience.

Add to Cart Buy Now

Ships within 4 days

DeHMY 18x25 mm NC Cable Drag Chain for Electrical Machines and 3D Printer Accessories

By DeHMY

₹3,657  

The DeHMY 18x25mm CNC Cable Drag Chain is an essential component for managing and protecting cables in CNC machines, electronics, and various machinery applications. Measuring 1 meter in length, this black drag chain is designed to offer easy installation and low noise operation, ensuring a smooth and efficient performance in your setup. Crafted for durability and flexibility, the DeHMY CNC Cable Drag Chain features a compact 18x25mm size that provides effective cable management while minimizing clutter and wear. Its robust design helps reduce cable stress and tangling, making it ideal for use in high-motion environments. Perfect for CNC machinery, electronic equipment, and other industrial applications, this drag chain enhances the organization and longevity of your cables, contributing to reliable and efficient operation.

Add to Cart Buy Now

Ships within 3 days

Invento ISC 651-2 1.5 LPMAir Vacuum Piston Pump for DIY Projects

By Invento

Pack of 4 piece

₹3,421   ₹6,372

You save ₹2,951!

46.31% OFF

Add to Cart Buy Now

Ships within 3 days

EASY ELECTRONICS Arduino Nano V3 with USB Cable

By EASY ELECTRONICS

₹601  

The Easy Electronics Arduino Nano V3 with USB Cable, a compact and versatile microcontroller board that brings your electronic projects to life. This kit includes the Arduino Nano V3 board and a USB cable for easy programming and communication. The Easy Electronics Arduino Nano V3 is based on the ATmega328P microcontroller, offering a wide range of features and capabilities. It provides a convenient and flexible platform for creating interactive electronic projects, robotics, sensor-based systems, and much more. With its small size and lightweight design, it is perfect for projects where space is limited. The Arduino Nano V3 board comes with a variety of digital and analog pins, allowing you to connect and control a wide range of electronic components and sensors. It supports PWM (Pulse Width Modulation) for precise control of devices such as motors and LED lights. It also features built-in EEPROM memory for storing data even when the power is turned off. Programming the Arduino Nano V3 is a breeze. Simply connect it to your computer using the included USB cable, install the Arduino IDE (Integrated Development Environment), and start coding. The Arduino IDE provides a user-friendly interface and a vast library of pre-written code examples, making it easy to get started, even for beginners. The versatility of the Arduino Nano V3 extends to its compatibility with a wide range of expansion boards, shields, and sensors. This allows you to expand its capabilities and tailor it to suit your specific project requirements. Whether you're creating a home automation system, a weather station, or a robot, the Arduino Nano V3 can be customized to meet your needs. The Easy Electronics Arduino Nano V3 with USB Cable is designed with durability and reliability in mind. It features a high-quality construction that ensures long-lasting performance. The Easy Electronics Arduino Nano V3 with USB Cable and unlock the world of electronics and programming. Let your creativity soar as you build and customize your own interactive projects. With its compact size, versatile features, and easy programming, the Arduino Nano V3 is the perfect tool for beginners and advanced electronics enthusiasts alike. Discover the endless possibilities of electronics with this powerful microcontroller board.

Add to Cart Buy Now

Ships within 3 days

EASY ELECTRONICS Development Board Ultra-Low Power Consumption Dual Core For ESP-32, ESP-32S

By EASY ELECTRONICS

₹730   ₹999

You save ₹269!

26.93% OFF

The Easy Electronics ESP-32 Development Board, a powerful and versatile platform for your IoT projects. This development board is based on the ESP-32 microcontroller, which offers dual-core processing, ultra-low power consumption, and built-in Wi-Fi and Bluetooth connectivity. The Easy Electronics ESP-32 Development Board is designed to provide seamless integration and exceptional performance. The dual-core processor allows for parallel execution of tasks, enabling efficient multitasking and faster response times. This makes it ideal for applications that require real-time data processing and complex computations. One of the key features of the ESP-32 microcontroller is its ultra-low power consumption. It is designed to operate in low-power modes, making it suitable for battery-powered applications and energy-efficient projects. With its advanced power management features, you can optimize the power consumption of your devices and extend the battery life. The development board is equipped with onboard Wi-Fi and Bluetooth modules, allowing for easy connectivity to the internet and other devices. You can effortlessly connect to wireless networks, send and receive data, and communicate with other devices using the built-in protocols. This opens up a world of possibilities for creating IoT applications, home automation systems, and wireless sensor networks. The Easy Electronics ESP-32 Development Board provides an array of input and output options, including digital I/O pins, analog inputs, PWM outputs, and more. This allows for seamless integration with a wide range of sensors, actuators, and peripheral devices. Whether you're measuring environmental parameters, controlling motors, or interfacing with displays, this development board offers the flexibility you need. Programming the ESP-32 Development Board is straightforward, thanks to its compatibility with the Arduino development environment. You can easily write code using familiar Arduino syntax and leverage the extensive library support available. Additionally, the development board features a USB interface for easy programming and debugging.

Add to Cart Buy Now

Ships within 3 days

Qurio Fire Robotic DIY Kit for Science Project

By Qurio

₹4,094   ₹4,448

You save ₹354!

7.96% OFF

Qurio Fire is an Arduino UNO based robotic kit designed for creating autonomous robots and learning robotics programming. Here are the key features and details of the Qurio Fire kit:
1. Arduino UNO Based: The kit is built around the Arduino UNO microcontroller board. Arduino UNO is a popular open-source hardware platform that allows for easy programming and control of various electronic components.
2. Autonomous Robotics: Qurio Fire is designed to create autonomous robots, meaning it enables the programming of robots to perform tasks and make decisions without human intervention. This fosters learning in robotics programming and autonomous systems.
3. Connectivity: The kit provides the capability to connect and control up to 4 DC motors, 4 sensors, and a Bluetooth module simultaneously. This allows for the creation of versatile robotic systems with motorized movement, sensor input, and wireless communication.
4. Robot Designs: Qurio Fire can be used to construct various types of robots, such as line followers, light followers, obstacle avoiders, edge avoiders, and more. These designs provide hands-on experiences with different robotic behaviors and functionalities.
5. Components: The kit includes an Arduino Uno microcontroller board with the Qurio Fire shield, IR and light sensors, 2 geared DC motors, high-impact polystyrene (HIP) structural parts, and other necessary components. These components form the building blocks for creating the autonomous robots.
6. Instructional Resources: Qurio Fire comes with a detailed instructional manual that caters to beginners learning Arduino. It provides guidance on programming, assembling the components, and getting started with robotics. Additionally, a free Android app is included, which likely covers a structured syllabus and provides additional educational content and tutorials.
Qurio Fire aims to provide a comprehensive learning experience in robotics programming and autonomous systems. By combining the Arduino UNO platform, a variety of components, and detailed instructional resources, it serves as an ideal kit for individuals interested in learning robotics programming and exploring the world of autonomous robots.

Add to Cart Buy Now

Ships within 3 days

Qurio Spark Robotic DIY Kit for Science Project

By Qurio

₹2,729  

Qurio Spark is a modular DIY kit specifically designed for learning robotic construction. It offers a wide range of possibilities with over 50 robot designs that can be created using the kit. Here are the key features and details of the Qurio Spark kit:
1. Modular Design: The kit features a modular design that allows for versatile robot construction. With the provided components, users can create and assemble more than 50 different robot designs. This modularity fosters creativity and experimentation.
2. Science Projects: Qurio Spark is suitable for making science projects. By utilizing the kit, children can engage in hands-on activities that explore scientific concepts and principles. This promotes practical learning and a deeper understanding of science.
3. Components: The kit includes various components such as 2 geared DC motors, a wired remote control, high-impact polystyrene (HIP) structural parts, and 2 sets of gears in three different sizes. These components form the building blocks for constructing the robot designs.
4. Step-by-Step Guide: The kit comes with a step-by-step guide that provides clear instructions on creating 10 specific designs. This guide assists users throughout the building process and helps them understand the construction techniques involved.
5. Android App: The Qurio Spark kit is accompanied by a free Android app that covers a structured syllabus. The app likely offers additional educational content, tutorials, and interactive resources, enriching the learning experience and supporting the exploration of robotics concepts.
Qurio Spark is designed to inspire children's interest in robotics and foster their skills in robotic construction. It serves as an educational tool that combines creativity, problem-solving, and STEM learning.

Add to Cart Buy Now

Ships within 4 days

DeHMY 18x37 mm Semi-Closed Cable Drag Chains for Electrical Machines and 3D Printer Accessories (Pack of 2)

By DeHMY

Pack of 2 piece

₹6,725  

The DeHMY 18x37mm Nylon Semi-Closed Cable Drag Chains (Pack of 2 Pcs) are designed to provide durable and flexible cable management for electrical machines and 3D printer accessories. Each chain measures 1 meter in length and features a semi-closed design that protects and guides cables while allowing for easy access and adjustments. Constructed from high-quality nylon, these drag chains are built to withstand rigorous use and offer excellent flexibility, reducing wear and tear on cables. The adjustable and nested design ensures a tidy and organized setup, minimizing cable tangling and interference. Ideal for use in industrial machinery and 3D printing applications, the DeHMY Nylon Semi-Closed Cable Drag Chains enhance the longevity and reliability of your equipment by providing efficient cable management and protection.

Add to Cart Buy Now

Ships within 4 days

NISAN Copper Bonded Plate 300x300x1.5 mm Square Brown, 721590

By NISAN

₹450  

Enhance your grounding system with the NISAN Copper Bonded Plate, expertly crafted to deliver superior conductivity and durability. Measuring 300x300x1.5 mm in a square profile, this brown grounding plate ensures reliable performance in all soil conditions. Its copper-bonded construction offers exceptional corrosion resistance, making it a dependable choice for long-term lightning protection.Designed for critical safety applications, the NISAN Copper Bonded Plate is part of NISAN’s trusted lightning protection range. It’s ideal for residential, commercial, or industrial setups where efficient grounding is essential. With high surface conductivity and a rugged finish, this plate helps maintain electrical safety while complying with modern grounding standards.

Add to Cart Buy Now

Ships within 3 days

Assorts Dividing Plate Set Tool Steel 21 mm Center Hole for HV4 /HV6 Rotary Table

By Assorts

₹3,421  

Achieve unmatched precision and reliability with the Dividing Plate Set Tool Steel 21 mm Center Hole for HV4 /HV6 Rotary Table from Assorts. This high-performance Workshop Tools, model: , is expertly crafted with for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The Dividing Plate Set Tool Steel 21 mm Center Hole for HV4 /HV6 Rotary Table is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts Dividing Plate Set Tool Steel 21 mm Center Hole for HV4 /HV6 Rotary Table. The thoughtfully selected are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the Dividing Plate Set Tool Steel 21 mm Center Hole for HV4 /HV6 Rotary Table for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 5 days

Omron Retroreflective Plate for E3ZM-B only, E39-RP1

By Omron

₹5,073  

The Omron Retroreflective Plate is a vital component used in conjunction with retroreflective optical sensors in industrial automation and control systems. This plate is designed to work in tandem with these sensors to bounce and redirect light signals, allowing for the accurate detection of objects, barriers, or conditions within a specific range. The retroreflective plate plays a central role in enhancing the performance and reliability of optical sensor systems, ensuring that they operate with precision and efficiency. Key features of the Omron Retroreflective Plate include its compatibility with retroreflective optical sensors, making it a crucial part of these systems. These plates often come in various sizes and configurations to accommodate different sensor models and installation requirements. They are known for their durable construction, capable of withstanding challenging industrial environments that may involve dust, moisture, or temperature variations. One of the significant advantages of these plates is their role in enhancing the performance of retroreflective optical sensors. They ensure that sensors receive clear and reliable signals, allowing for precise object detection or measurement. Omron Retroreflective Plates are recognized for their precision and reliability, contributing to the overall accuracy of optical sensor systems. Applications of Omron Retroreflective Plates are diverse and are found in industries such as manufacturing, automation, and quality control. These plates are essential for improving the accuracy and reliability of optical sensor systems, ensuring that sensors function optimally in detecting objects or conditions within their specified range. They play a pivotal role in enhancing production efficiency, product quality, and overall operational excellence. In summary, the Omron Retroreflective Plate is a critical component for optimizing the performance of retroreflective optical sensor systems in industrial and automation applications. Their compatibility, durability, and precision in reflecting light make them indispensable for industries that rely on optical sensors for accurate object detection, measurement, and quality control, ultimately contributing to production efficiency and operational excellence.

Add to Cart Buy Now

Ships within 6 days

Invento Aluminium Alloy Plate for DIY Project

By Invento

₹400 - ₹1,415

The "Invento Aluminium Alloy Plate for DIY Project" is a versatile and durable material designed for a variety of do-it-yourself (DIY) projects, crafts, construction, and fabrication applications. Made from high-quality aluminium alloy, this plate offers a combination of lightweight, strength, and corrosion resistance, making it suitable for both indoor and outdoor projects. Key features and benefits of the Invento Aluminium Alloy Plate include: High-Quality Material: The aluminium alloy plate from Invento is made from premium-grade aluminium alloy, ensuring durability, longevity, and excellent performance in various DIY and construction applications. Versatility: The aluminium alloy plate is available in various thicknesses, sizes, and finishes to meet different project requirements and preferences. Its malleability allows for easy cutting, bending, shaping, and drilling, making it adaptable to various design and construction needs. Lightweight and Strong: Aluminium alloy is known for its lightweight nature and high strength-to-weight ratio, making it an ideal choice for projects where weight savings and durability are essential. Corrosion Resistant: The aluminium alloy plate offers excellent corrosion resistance, making it suitable for outdoor applications where exposure to moisture and environmental elements is a concern. Aesthetic Appeal: The sleek and modern metallic finish of the aluminium alloy plate can enhance the visual appeal of your finished projects, providing a professional and polished look. When working with the Invento Aluminium Alloy Plate for DIY projects, it's essential to use appropriate tools and safety equipment, such as gloves, protective eyewear, and cutting tools, to ensure safe and precise handling during cutting, drilling, and shaping processes. In summary, the Invento Aluminium Alloy Plate for DIY projects represents a high-quality and versatile material option for DIY enthusiasts, hobbyists, craftsmen, and professionals seeking reliable and durable aluminium alloy plates for their creative and construction projects. With its lightweight design, strength, corrosion resistance, and easy workability, this innovative aluminium alloy plate caters to the diverse needs of users looking to bring their DIY ideas and projects to life with a dependable and high-performance material.

Type of Product : Plate

Material : Aluminium Alloy

Application : DIY Projects etc

Explore other Variants (6)

Ships within 6 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 1800KV BLDC + 30A ESC + 1045 Propellor ISC 829

By Invento

Pack of 1 piece

₹6,607   ₹12,980

You save ₹6,373!

49.1% OFF

Add to Cart Buy Now

Ships within 6 days

Invento Trapezoidal Lead Screw T8 8mm Pitch 2mm Lead 8 TR8

By Invento

Pack of 1 piece

₹2,831 - ₹3,421

The Invento 300mm Trapezoidal Lead Screw. Featuring a T8 trapezoidal thread profile, 8mm pitch, and 2mm lead, this lead screw provides smooth and precise linear motion in your projects. Whether you're building CNC machines, 3D printers, or automation systems, this lead screw ensures accurate positioning and reliable performance. With its durable construction and precise machining, it's perfect for demanding applications in manufacturing, prototyping, and robotics.

Type of Product : Parts & Accessories

Explore other Variants (4)

Ships within 6 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 1000KV BLDC + 30A ESC + 1045 Propellor ISC 827

By Invento

Pack of 1 piece

₹6,253   ₹12,980

You save ₹6,727!

51.83% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 9.6 W Solenoid Electric Lock ISC 1624

By Invento

₹1,415  

Add to Cart Buy Now

Ships within 6 days

Invento DJI Naza-M V2 MultiRotor Flight Stabilization Controller with GPS Set ISC 934

By Invento

Pack of 1 piece

₹35,399   ₹47,200

You save ₹11,801!

25% OFF

Add to Cart Buy Now

Ships within 6 days

Invento Aluminium Bracket (5.5 mm Mounting Hole Dia)

By Invento

Pack of 2 piece

₹1,049 - ₹2,123

The Invento Aluminium Bracket. Featuring a mounting hole diameter of 5.5mm, this bracket provides a sturdy and reliable mounting solution for various components. Whether you're building a frame, mounting sensors, or securing actuators, this aluminium bracket offers versatility and durability for your DIY projects.

Type of Product : Bracket

Material : Aluminium

Mounting Hole Diameter : 5.5mm

Country of Origin : India

Explore other Variants (8)

Ships within 6 days

Invento 1m Length Reinforced Nylon Cable Drag Chain

By Invento

Roll of 1 metre

₹1,769 - ₹16,519

The Invento 1 Mtr Reinforced Nylon Cable Drag Chain is a high-quality, robust solution designed to protect and manage cables in dynamic motion applications. Constructed from durable reinforced nylon, this drag chain is ideal for environments requiring reliable and long-lasting cable management. The reinforced nylon material offers exceptional resistance to wear, heat, and chemical exposure, ensuring that the drag chain maintains its integrity and functionality even under demanding conditions. Measuring 1 meter in length, this drag chain is suitable for a wide range of industrial applications, including CNC machinery, robotics, and automated systems. Its modular design allows for easy customization and adjustment to fit specific length requirements, providing versatility and adaptability to different setups. The drag chain features a smooth, low-friction interior surface that prevents cable wear and damage, extending the lifespan of the enclosed cables. Its openable links facilitate easy installation and maintenance, allowing for quick access to cables for repairs or replacements without dismantling the entire chain. Additionally, the chain's flexible design accommodates both horizontal and vertical movements, ensuring consistent performance in various motion paths. With a focus on both functionality and safety, the Invento 1 Mtr Reinforced Nylon Cable Drag Chain is designed to minimize the risk of cable entanglement and abrasion, reducing downtime and maintenance costs. This drag chain is an essential component for maintaining organized, efficient, and reliable cable management in industrial and automation applications, delivering a perfect balance of durability, flexibility, and ease of use.

Type of Product : Cable Drag Chain

Material : Reinforced Nylon

Application : 3D Printer, CNC, Robotics, DIY Projects etc

Length : 1000mm

Explore other Variants (13)

Ships within 6 days

Invento Aluminium Alloy Sheet for DIY Project (2 mm Hole Dia.)

By Invento

₹1,049 - ₹2,359

The "Invento Aluminium Alloy Sheet for DIY Project" is a versatile and durable material designed for use in various do-it-yourself (DIY) projects, crafting, construction, and fabrication applications. Made from high-quality aluminium alloy, this sheet offers a combination of lightweight, strength, and corrosion resistance, making it suitable for a wide range of indoor and outdoor projects. The aluminium alloy sheet from Invento is available in various thicknesses, sizes, and finishes to meet different project requirements and preferences. Its malleability allows for easy cutting, bending, shaping, and drilling, making it adaptable to various design and construction needs. Whether you're working on home improvement projects, creating custom furniture, building prototypes, crafting decorative items, or constructing structural components, this aluminium alloy sheet provides a reliable and versatile material option. In addition to its practical and functional attributes, the "Invento Aluminium Alloy Sheet for DIY Project" also offers an aesthetic appeal, with a sleek and modern metallic finish that can enhance the visual appeal of your finished projects. Its durability and long-lasting performance ensure that your creations will withstand the test of time, providing lasting value and satisfaction. When working with the "Invento Aluminium Alloy Sheet," it's essential to use appropriate tools and safety equipment, such as gloves and protective eyewear, to ensure safe and precise handling during cutting, drilling, and shaping processes. In summary, the "Invento Aluminium Alloy Sheet for DIY Project" represents a high-quality and versatile material option for DIY enthusiasts, hobbyists, craftsmen, and professionals seeking reliable and durable aluminium alloy sheets for their creative and construction projects. With its lightweight design, strength, corrosion resistance, and easy workability, this innovative aluminium alloy sheet caters to the diverse needs of users looking to bring their DIY ideas and projects to life with a dependable and high-performance material.

Type of Product : Aluminium Sheet

Weight : 500 gm

Color : Silver

Hole Diameter : 2mm

Material : Aluminium Alloy

Explore other Variants (2)

Ships within 6 days

Invento 2 Kg Load Capacity Plastic Robotic Wheel Durable Rubber Black Tire Wheel (Pack of 2)

By Invento

Pack of 2 piece

₹400 - ₹801

The Invento 2 Kg Load Capacity Plastic Robotic Wheel is an essential component for robotics enthusiasts and engineers seeking reliable and durable wheels for their projects. Each wheel in this pack of two features a robust plastic construction that ensures a sturdy and long-lasting performance. Designed to support a load capacity of up to 2 kilograms per wheel, these wheels are ideal for lightweight robotic platforms and other mobile applications. The wheels are equipped with durable black rubber tires, providing excellent traction and stability on various surfaces. The rubber tires offer a non-slip grip, ensuring smooth and controlled movement even on uneven or slippery terrain. This makes them suitable for both indoor and outdoor use, enhancing the versatility of your robotic designs. With a focus on durability and reliability, the Invento robotic wheels are engineered to withstand repeated use and rough handling. The plastic material is resistant to wear and tear, ensuring that the wheels maintain their performance over time. Additionally, the wheels are easy to install and integrate into your robotic systems, making them a practical choice for DIY projects and professional applications alike. Whether you are building a robotic vehicle, a remote-controlled car, or a custom automation system, the Invento 2 Kg Load Capacity Plastic Robotic Wheel offers the quality and functionality you need. This pack of two wheels provides a cost-effective solution for enhancing the mobility and performance of your robotic creations.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Hole Size : 6 mm

Pack of : 2

Name of Manufacturer/Packer/Importer : Invento India Ltd.

Explore other Variants (6)

Ships within 6 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 1400KV BLDC + 30A ESC + 1045 Propellor ISC 828

By Invento

Pack of 1 piece

₹6,607   ₹12,980

You save ₹6,373!

49.1% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 60 - 100 W Aluminium Peltier Water Cooling Block ISC 1638-1B

By Invento

₹1,651  

Add to Cart Buy Now

Previous Next

Page 1 of 28 results