View
View
View
View
| Connection | Cable type |
| Indicator | Operation indicator (red LED) |
| Response Time | Light ON: Max. 20㎲, Dark ON: Max. 100㎲ |
| Material | Case: PBT, Sensing part: PC |
Connection |
Cable type |
Indicator |
Operation indicator (red LED) |
Response Time |
Light ON: Max. 20㎲, Dark ON: Max. 100㎲ |
Material |
Case: PBT, Sensing part: PC |
Protection Circuit |
Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
Type of Product |
Photomicro Sensor |
Insulation Resistance |
≥20 MΩ (250 VDC Megger) |
Sensing Distance |
5mm |
Protection Structure |
IP50 (IEC standard) |
Light Source |
Infrared LED(940nm) |
Sensing Target |
Opaque |
Sensing Type |
Through-beam type |
Operation Mode |
Light ON/Dark ON(set by control wire) |
Current Consumption |
mAx. 30 mA |
Control Output |
PNP open collector output |
Dielectric Strength |
Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
Load Current |
Max. 100mA |
Environment Ambient Humidity |
35 to 85% RH, Storage: 35 to 85% RH |
Model No |
BS5-T1M-P |
Country of Origin |
South Korea |
Hysteresis Distance |
≤0.05 mm |
Environment Ambient Temperature |
-20 to 55℃, Storage : -25 to 85℃ |
Vibration |
1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
Noise Immunity |
The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC |
Load Voltage |
≤30VDC |
Shock |
15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times |
Residual voltage (V) |
NPN: ≤1.2VDC, PNP: ≤ 1.2VDC |
Response Frequency |
2 kHz |
Power Voltage |
5-24VDC ±10%(ripple P-P : max. 10%) |
Name of Manufacturer/Packer/Importer |
Teknocrats Control System (I) Pvt Ltd. |
Environment Ambient Illumination |
Fluorescent lamp: Max. 1,000lx(received illumination) |
Weight Body |
Approx. 50g |
Min Sensing Target |
≥Ø0.8 mm×2 mm |
Looking for bulk pricing or different specifications?