View
View
View
View
| Type of Product | Communication Cassette |
| Model No | AFP7CCRS1M1 |
| Interface | RS-232C 1ch + RS-485 1ch |
| Monotaro ID | 51463084 |
Type of Product |
Communication Cassette |
Model No |
AFP7CCRS1M1 |
Interface |
RS-232C 1ch + RS-485 1ch |
Monotaro ID |
51463084 |
Vibration Resistance |
5 to 8.4 Hz, single amplitude 3.5 mm, 1 sweep / minute (IEC61131-2), 8.4 to 150 Hz, constant acceleration 9.8m/s2 10 sweeps (1 octave / min) (IEC6111-2) |
Shock Resistance |
147 m/s² or more 3 times each in X, Y, and Z directions (IEC61131-2) |
Synchronization Type |
Asynchronous method |
Country of Origin |
Japan |
Import Country |
Direct Import from Japan |
Applicable Standard |
Product CE marking: Cables and additional memory are not subject to applicable standards when used alone, so CE marking is not displayed on products. When set with the PLC main unit, it complies with applicable directives. EMC Directive Applicable Standard: EN61131-2, UL Registered Product (Listed) File No.: E96300 Standard No.: UL 61010-2-201, CSA Approved Product (Certified) File No.: E96300(C-UL) Standard No. :CAN/CSA-C22.2 No.61010-2-201 |
Communication Protocol |
Half-duplex method |
Atmosphere |
No corrosive gas. There should be no excessive dust. |
Noise Resistance |
1000V[PP] pulse width 50ns, 1 μs (by noise simulator method) |
No. of Connections |
RS-485: Maximum of 99 units for general purpose communication, maximum of 99 units for computer link, maximum of 16 units for PLC link, maximum of 99 units for MODBUS-RTU (Note) When C-NET adapters are mixed, the maximum number of connected units is 32 units, Transmission speed is limited to 19.2kbit/s or less. For the RS-485 converter on the computer side, we recommend the SI-35 manufactured by Line Eye Co., Ltd. When using SI-35, it may be necessary to programmatically adjust the time from when FP7 receives a command until it sends back a response. |
RoHS Directive |
Correspondence |
Name of Manufacturer/Packer/Importer |
Panasonic Corporation |
Transmission distance (m) |
RS-232C maximum 15m (Note 1), RS-485 maximum 1,200m (Note 2) (Note 1) When communicating at a speed of 38.4kbit/s or higher, please keep the cable length within 3m. Be sure to use shielded wire for RS-232C wiring to improve noise resistance. (Note 2) When C-NET adapters are mixed, the maximum number of connected devices is 32, and the transmission speed is limited to 19.2 kbit/s or less. |
Current Consumption (mA) |
35 or less (Note) This is the increase in CPU current consumption. |
Operation Ambient Temperature (°C) |
0 to +55, when saving: -40 to +70 |
Operating Ambient Humidity |
10 to 95 % RH (at 25°C, no condensation), Storage: 10 to 95 % RH (at 25°C, no condensation) |
Mass of Main Unit (g) |
Approx. 25 (including terminal block) |
Transmission Speed (bps) |
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
Transmission standard |
Stop bit: 1bit/2bit, Parity: No/Yes (odd/even), Data length: 7bit/8bit, Start code: With STX/No STX, End code: CR/CR+LF/No/ETX, Data transmission order: Send from bit 0 in character units |
Looking for bulk pricing or different specifications?