• Home /
• Tooling and Cutting /
• Milling Tools /
• Carbide End Mill

Have a question? Call us now at +91 9650660070

Carbide End Mill

Showing 40 out of 774 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

TOTEM 10 X 25 X 70 X 10 mm, 4 Flute Centre Cutting TiAlN Coated Carbide End Mill (FBK0500727)

By TOTEM

₹2,713  

OLD JIT

Add to Cart Buy Now

Ships within 4 days

IVY Tech 6 x 75 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹1,533  

IVY Tech 6 mm x 75 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 4 days

REZKA Long Neck Endmills (Diamter 1 to 3 mm)

By REZKA

₹282 - ₹388

The REZKA Long Neck Endmills (Diameter 1 to 3 mm) are crafted for ultra-precise, deep-reach milling operations in narrow or hard-to-access areas. Ideal for fine-detail applications in mold making, electronics, and medical device machining, these endmills offer exceptional rigidity and stability. Constructed from high-grade solid carbide, they deliver superior edge retention and resistance to wear, even during extended use. The long neck design allows deeper cuts without compromising strength or precision, making them perfect for 3D contouring and high-precision slotting. Compatible with high-speed CNC machines, these tools enable smooth chip evacuation and minimal vibration, ensuring excellent surface finishes and tight tolerances. Whether working with steels, aluminum, or composite materials, REZKA Long Neck Endmills provide reliable, consistent performance for professionals seeking accuracy in intricate milling environments.

Type of Product : Long Neck Endmills

Hardness : 55 HRC

Coating : Golden

Shank Diameter : 4 mm

Explore other Variants (9)

Ships within 4 days

IVY Tech 12 x 75 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹2,949  

IVY Tech 12 mm x 75 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 5 days

REZKA Single Flute Endmills High Performance (Diameter 3 to 8 mm)

By REZKA

₹199 - ₹695

The REZKA Single Flute Endmills High Performance (Diameter 3 to 8 mm) are engineered for fast, efficient machining with superior chip evacuation. Ideal for aluminum, plastics, and other non-ferrous materials, these tools deliver high-speed cutting with minimal heat buildup. The single-flute design provides maximum flute volume, which improves material removal rates and prevents clogging, especially in soft or sticky materials. Made from premium solid carbide, these endmills maintain sharp cutting edges and offer extended tool life even during continuous operation. Perfect for CNC milling tasks like slotting, contouring, and surface finishing, they offer excellent surface quality and dimensional accuracy. Whether you're involved in sign making, aluminum part production, or rapid prototyping, REZKA Single Flute Endmills offer smooth performance, reduced wear, and faster cycle times for professional and industrial users.

Type of Product : Single Flute Endmills

No. of Flutes : 1

Explore other Variants (5)

Ships within 4 days

IVY Tech 3 x 50 mm 55 HRC Carbide End Mill 4 Flute

By IVY Tech

₹388  

IVY Tech 3 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills

Add to Cart Buy Now

Ships within 4 days

IVY Tech 2 x 50 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹565  

IVY Tech 2 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 4 days

IVY Tech 3 x 50 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹565  

IVY Tech 3 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 3 days

Geefun 55 HRC Carbide Gen-End Mill

By Geefun

₹553 - ₹29,499

You save ₹636!

53.51% OFF

The Geefun 55 HRC Carbide Flat End Mill is a precision-engineered tool designed for high-efficiency machining in tough materials. Made from premium-grade carbide, it boasts a hardness of 55 HRC, ensuring excellent durability and wear resistance for demanding applications. The flat end design delivers sharp, clean cuts, making it ideal for slotting, contouring, and pocket milling in hardened steels, alloys, and other robust materials.
This end mill is built for reliability under high-speed conditions, with optimized flute geometry to enhance chip evacuation and minimize heat buildup. Perfect for industrial manufacturing, toolmaking, and prototyping, the Geefun 55 HRC Carbide Flat End Mill provides exceptional accuracy, smooth finishes, and extended tool life. Achieve professional-grade results with this versatile and high-performing milling solution.

Type of Product : Gen-End Carbide Mill

Material : Carbide

Country of Origin : India

End Type : Gen-End

Name of Manufacturer/Packer/Importer : SUKHMANI TOTAL SOLUTIONS

HRC : 55 HRC

Explore other Variants (39)

Ships within 2 days

IVY Tech 8 x 100 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹2,123  

IVY Tech 8 mm x 100 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 4 days

REZKA Long Neck Endmills 2 mm Dia 25 mm Neck Length & 60 mm Total Length (Pack of 3 Pcs)

By REZKA

Pack of 3 piece

₹872  

The REZKA Long Neck Endmills 2 mm Dia 25 mm Neck Length & 60 mm Total Length is engineered for intricate machining tasks where extended reach and high precision are critical. Crafted from premium solid carbide, this long neck endmill from REZKA is ideal for deep cavity milling, mold finishing, and other complex applications. Its narrow diameter and extended neck ensure clean access to tight spaces while maintaining stability and sharpness. Built under the reliable Long Neck Endmills range, the REZKA Long Neck Endmills 2 mm Dia 25 mm Neck Length & 60 mm Total Length delivers exceptional tool life, reduced vibration, and superior surface finish. Whether you're working with hardened steel, aluminum, or composite materials, this tool supports fine detailing with confidence and control. Perfect for professionals in mold-making,

Add to Cart Buy Now

Ships within 3 days

Kennametal 4 Flute Square TiAlN Coated Carbide End Mill (KC633M Grade)

By Kennametal

₹966 - ₹9,793

You save ₹391!

28.81% OFF

The Kennametal Carbide End Mill 4 Flute Square TiAlN Coated KC633M is a premium cutting tool engineered for precision machining applications across a wide range of materials. Crafted from solid carbide, this end mill offers exceptional durability and wear resistance, ensuring extended tool life and consistent performance in demanding machining environments. Featuring a 4-flute design, this end mill delivers efficient chip evacuation and improved stability during cutting operations, resulting in smooth surface finishes and precise dimensional accuracy. The square end geometry allows for versatile milling operations, including slotting, profiling, and roughing, making it suitable for various machining tasks. The TiAlN coating (Titanium Aluminum Nitride) enhances the end mill's performance by providing increased heat resistance and lubricity, reducing friction and extending tool life. This coating also promotes efficient chip evacuation and helps prevent built-up edge, enabling higher cutting speeds and feeds for increased productivity. Whether used for milling steels, stainless steels, cast iron, or other materials, the Kennametal Carbide End Mill 4 Flute Square TiAlN Coated KC633M delivers exceptional performance and reliability, making it an ideal choice for machinists and manufacturers seeking superior results and efficiency in their machining operations.

Type of Product : Carbide End Mill

Product Sub Type : 4 Flute Square

Series : GOmill™ GP

No. of Flutes : 4 Flute

Cutting & Coating : TiAlN Coated

Helix Angle : 30

Grade : KC633M

Shank : Straight-Cylindrical

Explore other Variants (12)

Ships within 4 days

Pentagon Boring Head Carbide Milling Tool, PBBF18-12 (Set of 12)

By Pentagon

Set of 12 piece

₹3,893  

PENTAGON Boring Bar set of 12 pcs bar Shank dia 18 mm for 3 Inch Boring Head Carbide Milling Tool Tools has established itself as a renowned brand synonymous with precision in the manufacturing of cutting tools tailored for diverse machining applications. Renowned for their commitment to excellence, PENTAGON Tools consistently employs high-quality materials, with a preference for carbide and other durable alloys. This deliberate choice ensures that their tools exhibit exceptional longevity and reliability, even under rigorous machining conditions. At the core of PENTAGON Tools' success lies their unwavering dedication to precision engineering. Every tool is meticulously crafted with an emphasis on accuracy, enabling machinists to achieve tight tolerances and impeccable finishes in their work. This commitment to precision makes PENTAGON Tools an invaluable choice for professionals who demand exacting standards in their machining projects. The versatility of PENTAGON Tools is a hallmark feature, as these tools are intelligently designed to excel across a spectrum of machining tasks. Whether it involves milling intricate shapes, turning precise components, or executing meticulous boring operations, users can rely on PENTAGON Tools to deliver consistent and reliable performance, showcasing adaptability across different applications. Innovation is a driving force behind PENTAGON Tools' success. The brand consistently integrates cutting-edge features and technologies into their tools, aiming to enhance overall performance, mitigate tool wear, and elevate the efficiency of machining processes. This forward-thinking approach positions PENTAGON Tools at the forefront of technological advancements in the machining industry. Furthermore, the thoughtful design of PENTAGON Tools ensures compatibility with standard machining equipment. This user-friendly aspect simplifies integration into existing setups, providing machinists with a seamless experience and allowing them to leverage the advantages of PENTAGON Tools without disruptions. In conclusion, PENTAGON Tools stands as a paragon of excellence in the realm of precision cutting tools, combining quality materials, precision engineering, versatility, innovation, and compatibility to meet the diverse needs of machinists in their quest for superior machining outcomes.

Add to Cart Buy Now

Ships within 3 days

Tabikut Carbide End Mill Long 55 HRC 4 Flute

By Tabikut

₹388 - ₹2,005

The Tabikut Carbide End Mill Long 55 HRC 4‑Flute (4–12 mm Dia) offers precision, reach, and durability for demanding milling tasks. Made from high-grade carbide, it’s engineered to machine materials hardened up to 55 HRC without compromise. Its 4‑flute configuration promotes effective chip evacuation, reduces vibration, and delivers a superior surface finish. The extended length enhances reach and rigidity—perfect for deep-slotting, pocketing, and shoulder-milling operations in CNC machining. Available in diameters from 4 mm to 12 mm, it accommodates a wide range of feature sizes, while the polished flutes minimize heat buildup during high-speed cutting, extending tool life and preserving sharpness. Ideal for use in hardened steel, stainless alloys, tool steels, and cast metals, this long-shank end mill ensures consistent dimensional accuracy, reduced deflection, and reliable performance across multiple machining cycles—making it a versatile and trustworthy choice for precision industrial manufacturing.

Type of Product : Carbide End Mill

Helix Angle : 35°

Hardness : 55 HRC

Material : Alloy Steel

Application : Industrial

Flute : 4

Used For : Face Mill, Shoulder mill, side mill

Grain Size : 0.5 μm

Explore other Variants (11)

Ships within 4 days

REZKA Long Neck Endmills 1.5 mm Dia 16 mm Neck Length & 50 mm Total Length (Pack of 3 Pcs)

By REZKA

Pack of 3 piece

₹825  

The REZKA Long Neck Endmills 1.5 mm Dia 16 mm Neck Length & 50 mm Total Length is engineered for intricate machining tasks where extended reach and high precision are critical. Crafted from premium solid carbide, this long neck endmill from REZKA is ideal for deep cavity milling, mold finishing, and other complex applications. Its narrow diameter and extended neck ensure clean access to tight spaces while maintaining stability and sharpness. Built under the reliable Long Neck Endmills range, the REZKA Long Neck Endmills 1.5 mm Dia 16 mm Neck Length & 50 mm Total Length delivers exceptional tool life, reduced vibration, and superior surface finish. Whether you're working with hardened steel, aluminum, or composite materials, this tool supports fine detailing with confidence and control. Perfect for professionals in mold-making,

Add to Cart Buy Now

Ships within 3 days

WIDIA 16 mm Cutting Dia 4 Flute Long Carbide End Mill

By WIDIA

₹21,239  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 3 days

WIDIA 4 mm Cutting Dia 4 Flute Extra Long Carbide End Mill

By WIDIA

₹2,949  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 3 days

WIDIA 25 mm Cutting Dia 4 Flute Long Carbide End Mill

By WIDIA

₹40,119  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 3 days

Kennametal 2 Flute Square TiAlN Coated Carbide End Mill (KC633M Grade)

By Kennametal

₹990 - ₹9,557

You save ₹697!

20.44% OFF

The Kennametal Carbide End Mill 2 Flute Square TiAlN Coated KC633M is a high-performance cutting tool designed for precision machining applications in various industries. Featuring a solid carbide construction, this end mill offers exceptional durability and wear resistance, ensuring long tool life and consistent performance even in demanding machining environments. The 2-flute design provides efficient chip evacuation and improved stability during cutting operations, resulting in smooth surface finishes and accurate dimensions. The square end geometry enables the end mill to perform both roughing and finishing operations with ease, making it versatile for a wide range of milling tasks. Coated with TiAlN (Titanium Aluminum Nitride), the KC633M end mill provides enhanced heat resistance and lubricity, reducing friction and extending tool life. This coating also improves chip flow and helps prevent built-up edge, allowing for higher cutting speeds and feeds. Whether used for milling steels, stainless steels, cast iron, or other materials, the Kennametal Carbide End Mill 2 Flute Square TiAlN Coated KC633M delivers superior performance and reliability, making it a preferred choice for machinists and manufacturers aiming for high-quality results.

Type of Product : Carbide End Mill

Product Sub Type : 2 Flute Square

Series : GOmill™ GP

No. of Flutes : 2 Flute

Cutting & Coating : TiAlN Coated

Helix Angle : 30

Grade : KC633M

Shank : Straight-Cylindrical

Explore other Variants (20)

Ships within 3 days

WIDIA 2 mm Cutting Dia 4 Flute Carbide End Mill

By WIDIA

₹1,415  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 3 days

WIDIA 7 mm Cutting Dia 4 Flute Carbide End Mill

By WIDIA

₹2,831  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 3 days

WIDIA 3 mm Cutting Dia 4 Flute Extra Long Carbide End Mill

By WIDIA

₹2,595  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 3 days

WIDIA 6 mm Cutting Dia 4 Flute Extra Long Carbide End Mill

By WIDIA

₹3,421  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 5 days

IVY Tech 20 x 150 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹15,339  

IVY Tech 20 mm x 150 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 4 days

IVY Tech 12 x 150 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹4,719  

IVY Tech 12 mm x 150 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 4 days

IVY Tech 16 x 100 mm 55 HRC Carbide End Mill 4 Flute

By IVY Tech

₹5,781  

IVY Tech 16 mm x 100 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills

Add to Cart Buy Now

Ships within 3 days

HD Carbide End Mill 4 Flute Ball Nose 50 mm Length 55 HRC Hardness

By HD Carbide

₹258 - ₹506

The HD Carbide End Mill 4 Flute Ball Nose 50 mm Length 55 HRC Hardness is designed to deliver precise machining performance with its engineered geometry and durable carbide construction. It is manufactured to maintain stability during high-speed cutting operations, ensuring smooth material removal and consistent dimensional accuracy. The tool supports applications that require reliable operation in demanding metalworking environments. Its structural design assists in maintaining rigidity while reducing vibration, contributing to improved surface finish and tool longevity.This product features a configuration suited for controlled cutting paths and optimized chip evacuation. The balanced flute profile enhances operational efficiency across various materials compatible with carbide tools. The tool length and diameter specifications provide compatibility for multiple machining setups where precision is essential. Engineered for consistency, the HD Carbide End Mill 4 Flute Ball Nose 50 mm Length 55 HRC Hardness offers dependable results across applications involving slotting, contouring, or detailed shaping tasks.

Type of Product : End Mill

Series : S.C E/M & B/N 55HRC

Overall Length : 50 mm

No. of Flutes : 4 Flute

Length Type : Standard

Hardness : 55 HRC

Material : Carbide

Type : Ball Nose

Suitable For : Slotting & Drilling Use

Explore other Variants (8)

Ships within 5 days

HD Carbide End Mill 4 Flute Ball Nose 50 mm Length 65 HRC Hardness

By HD Carbide

₹435 - ₹766

The HD Carbide End Mill 4 Flute Ball Nose 50 mm Length 65 HRC Hardness is designed to deliver precise machining performance with its engineered geometry and durable carbide construction. It is manufactured to maintain stability during high-speed cutting operations, ensuring smooth material removal and consistent dimensional accuracy. The tool supports applications that require reliable operation in demanding metalworking environments. Its structural design assists in maintaining rigidity while reducing vibration, contributing to improved surface finish and tool longevity.This product features a configuration suited for controlled cutting paths and optimized chip evacuation. The balanced flute profile enhances operational efficiency across various materials compatible with carbide tools. The tool length and diameter specifications provide compatibility for multiple machining setups where precision is essential. Engineered for consistency, the HD Carbide End Mill 4 Flute Ball Nose 50 mm Length 65 HRC Hardness offers dependable results across applications involving slotting, contouring, or detailed shaping tasks.

Type of Product : End Mill

Series : S.C E/M & B/N 65HRC

Overall Length : 50 mm

No. of Flutes : 4 Flute

Length Type : Standard

Hardness : 65 HRC

Material : Carbide

Type : Ball Nose

Suitable For : Slotting & Drilling Use

Explore other Variants (8)

Ships within 3 days

WIDIA 1 mm Cutting Dia 4 Flute Carbide End Mill

By WIDIA

₹1,415  

Features -
WIDIA - Solid Carbide End Mills
- Unequal flute spacing.
- Centre cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Standard items listed. Additional styles and coatings made to order.

Add to Cart Buy Now

Ships within 5 days

Addison Carbide Tipped Straight Shank End Mill

By Addison

₹3,185 - ₹7,315

You save ₹2,650!

42.02% OFF

The Addison Carbide Tipped Straight Shank End Mill is a precision-engineered cutting tool designed for optimal performance in machining applications. Crafted with premium carbide materials, this end mill offers exceptional hardness, durability, and heat resistance, ensuring prolonged tool life and consistent cutting performance even under demanding conditions. With its straight shank design, this end mill is compatible with a wide range of milling machines, providing versatility and ease of use across various machining tasks. The carbide tip enhances cutting speed and efficiency, allowing for smooth and precise material removal with reduced chatter and vibration. Engineered to deliver superior surface finish and dimensional accuracy, the Addison Carbide Tipped End Mill is ideal for milling operations in industries such as aerospace, automotive, mold and die, and general machining. Whether you're milling aluminum, steel, or other materials, this tool excels in achieving high-quality results and optimizing productivity. The precise flute geometry and advanced coating technology further enhance performance by promoting efficient chip evacuation and reducing friction, thereby minimizing tool wear and prolonging cutting tool life. From roughing to finishing operations, the Addison Carbide Tipped Straight Shank End Mill stands as a reliable solution for precision machining requirements, delivering consistent results and maximizing machining efficiency.

Type of Product : Carbide Tipped Straight Shank End Mill

Features : Accurate Dimensions. Precisely Engineered. Fine Finish.

Standard : IS 9324-1991, GRADE OF TIP ISO K-20

Explore other Variants (12)

Ships within 5 days

Addison Carbide Tipped Straight Shank End Mill Brazed Type

By Addison

₹2,241 - ₹3,185

You save ₹1,636!

39.78% OFF

The Addison Carbide Tipped Straight Shank End Mill Brazed Type is a precision-engineered cutting tool designed to excel in a variety of machining applications. Crafted with meticulous attention to detail, this end mill embodies durability, efficiency, and accuracy, making it a go-to choice for professionals in the machining industry. Constructed with high-quality carbide material, the end mill's cutting edges are exceptionally hard and resistant to wear, ensuring prolonged tool life and consistent performance even in demanding machining environments. The brazed type design further enhances its durability and stability during operation, minimizing vibration and maximizing machining precision. Equipped with a straight shank, this end mill offers compatibility with a wide range of machining equipment, providing versatility and ease of use for machinists across different setups. Whether it's milling, slotting, or profiling, this tool delivers precise and reliable results, enabling users to achieve their machining objectives with confidence. The Addison Carbide Tipped Straight Shank End Mill Brazed Type is engineered to meet the rigorous demands of modern machining applications, offering exceptional cutting performance, longevity, and versatility. With its superior quality and craftsmanship, it stands as a trusted solution for professionals seeking top-tier cutting tools to optimize their machining processes and achieve superior results.

Type of Product : Carbide Tipped Straight Shank End Mill (Brazed Type)

Features : Accurate In Dimensions. Hss And Carbide. Durable.

Standard : IS 9323-1991, GRADE OF TIP ISO K-20

Explore other Variants (10)

Ships within 3 days

ATC Carbide Endmil 4mm

By ATC

₹553  

Add to Cart Buy Now

Ships within 4 days

IVY Tech 2.5 x 50 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹565  

IVY Tech 2.5 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 4 days

IVY Tech 1.5 x 50 mm 62 HRC Carbide End Mill 4 Flute

By IVY Tech

₹565  

IVY Tech 1.5 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills NANO COATINGS ALLOWS FOR BETTER FINISH , High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc. : ,helix angle s 35deg,high adaptability to material and hardness of workpieces,widely used to mold and product processing and cost efficient.

Add to Cart Buy Now

Ships within 5 days

IVY Tech 1.5 x 50 mm 55 HRC Carbide End Mill 4 Flute

By IVY Tech

₹388  

IVY Tech 1.5 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills

Add to Cart Buy Now

Ships within 4 days

IVY Tech 1 x 50 mm 55 HRC Carbide End Mill 4 Flute

By IVY Tech

₹388  

IVY Tech 1 mm x 50 mm 4 Flutes High Speed Machining both in Wet and Dry conditions ,Application for cutting carbon steel, mould steel, alloy steel, Inconel, stainless steel, titanium alloy etc Carbide Endmill are made from solid carbide materials of high-grade quality. They are used for the machining of hard metals in various industries. Carbide Endmills have longer tool life, high heat and wear & tear resistance. They are available in various sizes and shapes.  Carbide Endmills are more expensive than HSS, but they can be used where the most accurate finish is required Carbide Endmills are suitable for high-speed machining operations where a very smooth finish is required along with good surface finish accuracy and dimensional accuracy Carbide Endmill is a high-speed tool used for milling metals and non-metals. It is mainly used in high-speed machining applications. The tool’s geometry determines the type of end mill (flat bottom or ball nose). The type of material being machined determines the grade of carbide used on the tool. Carbide Endmills are available in various sizes and grades to suit different applications and materials. They are manufactured by grinding the diamond particles onto the end of a solid steel rod which has been hardened by quenching it in liquid nitrogen or other means. Carbide Endmills can be used to machine all types of metal including ferrous alloys such as mild steel, cast iron, stainless steel and aluminium as well as non-ferrous alloys such as brass, copper and bronze. Carbide Endmills

Add to Cart Buy Now

Ships within 3 days

Tabikut Carbide End Mill 55 HRC 4 Flute (Pack of 2)

By Tabikut

Pack of 2 piece

₹412 - ₹459

The Tabikut Carbide End Mill 55 HRC 4‑Flute (Pack of 2) is a precision-engineered cutting tool tailored for demanding milling tasks in materials hardened up to 55 HRC. Available in diameters from 1 mm to 2.5 mm, this compact yet robust end mill set comes with two premium carbide cutters, each crafted with a 4‑flute geometry that optimizes chip evacuation, reduces vibration, and delivers exceptional surface finishes. Its balanced design ensures rigidity and accuracy, ideal for machining narrow slots, intricate contours, and fine features in hardened steels, stainless alloys, and tool steels. The polished flute surface minimizes heat buildup during high-speed CNC operations, extending tool life and sustaining sharp cutting edges. Well-suited for both roughing and light finishing, the Tabikut Carbide End Mill set offers consistent performance, enhanced wear resistance, and reliable repeatability across multiple machining cycles—making it a smart choice for precision-driven manufacturing environments.

Type of Product : Carbide End Mill

Helix Angle : 35°

Length : 50 mm

Hardness : 55 HRC

Material : Alloy Steel

Shank Diameter : 4 mm

Application : Industrial

Flute : 4

Used For : Face Mill, Shoulder mill, side mill

Grain Size : 0.5 μm

Pack of : 2

Explore other Variants (4)

Ships within 4 days

REZKA Long Neck Endmills 1 mm Dia 22 mm Neck Length & 50 mm Total Length (Pack of 3 Pcs)

By REZKA

Pack of 3 piece

₹872  

The REZKA Long Neck Endmills 1 mm Dia 22 mm Neck Length & 50 mm Total Length is engineered for intricate machining tasks where extended reach and high precision are critical. Crafted from premium solid carbide, this long neck endmill from REZKA is ideal for deep cavity milling, mold finishing, and other complex applications. Its narrow diameter and extended neck ensure clean access to tight spaces while maintaining stability and sharpness. Built under the reliable Long Neck Endmills range, the REZKA Long Neck Endmills 1 mm Dia 22 mm Neck Length & 50 mm Total Length delivers exceptional tool life, reduced vibration, and superior surface finish. Whether you're working with hardened steel, aluminum, or composite materials, this tool supports fine detailing with confidence and control. Perfect for professionals in mold-making,

Add to Cart Buy Now

Ships within 3 days

HD Carbide End Mill 2/4 Flute Flat 75 mm Length 55 HRC Hardness Long Series

By HD Carbide

₹412 - ₹978

The HD Carbide End Mill 2/4 Flute Flat 75 mm Length 55 HRC Hardness Long Series is designed to deliver precise machining performance with its engineered geometry and durable carbide construction. It is manufactured to maintain stability during high-speed cutting operations, ensuring smooth material removal and consistent dimensional accuracy. The tool supports applications that require reliable operation in demanding metalworking environments. Its structural design assists in maintaining rigidity while reducing vibration, contributing to improved surface finish and tool longevity.This product features a configuration suited for controlled cutting paths and optimized chip evacuation. The balanced flute profile enhances operational efficiency across various materials compatible with carbide tools. The tool length and diameter specifications provide compatibility for multiple machining setups where precision is essential. Engineered for consistency, the HD Carbide End Mill 2/4 Flute Flat 75 mm Length 55 HRC Hardness Long Series offers dependable results across applications involving slotting, contouring, or detailed shaping tasks.

Type of Product : End Mill

Series : S.C E/M & B/N 55 HRC Long Series

Overall Length : 75 mm

No. of Flutes : 2/4 Flute

Length Type : Standard

Hardness : 55 HRC

Material : Carbide

Type : Flat E/M

Suitable For : Slotting & Drilling Use

Explore other Variants (5)

Ships within 3 days

HD Carbide End Mill 4 Flute Ball Nose 150 mm Length 55 HRC Hardness Extra Long Series

By HD Carbide

₹1,887 - ₹15,339

The HD Carbide End Mill 4 Flute Ball Nose 150 mm Length 55 HRC Hardness Extra Long Series is designed to deliver precise machining performance with its engineered geometry and durable carbide construction. It is manufactured to maintain stability during high-speed cutting operations, ensuring smooth material removal and consistent dimensional accuracy. The tool supports applications that require reliable operation in demanding metalworking environments. Its structural design assists in maintaining rigidity while reducing vibration, contributing to improved surface finish and tool longevity.This product features a configuration suited for controlled cutting paths and optimized chip evacuation. The balanced flute profile enhances operational efficiency across various materials compatible with carbide tools. The tool length and diameter specifications provide compatibility for multiple machining setups where precision is essential. Engineered for consistency, the HD Carbide End Mill 4 Flute Ball Nose 150 mm Length 55 HRC Hardness Extra Long Series offers dependable results across applications involving slotting, contouring, or detailed shaping tasks.

Type of Product : End Mill

Series : S.C E/M & B/N 55 HRC Extra Long Series

Overall Length : 150 mm

No. of Flutes : 4 Flute

Length Type : Standard

Hardness : 55 HRC

Material : Carbide

Type : Ball Nose

Suitable For : Slotting & Drilling Use

Explore other Variants (9)

Previous Next

Page 1 of 20 results