Have a question? Call us now at +91 9650660070

care@industrybuying.com

Hand Taps

Showing 40 out of 4632 products

Sort by

Inder 12.7 mm(1/2") - 14" BSP Carbon Steel Cut Thread Right Hand Taps 1005D

Ships within 24 hrs

INDER BSP 55 Deg Carbon Steel Cut Thread Right Hand Taps P-1005 Series

By INDER

Set of 2 piece

₹211 - ₹6,489

You save ₹226!

28.99% OFF

INDER P-1005 is a carbon steel hand tap with a 55 degree thread angle, thread size. It comes with a hex shank, and it has an overall length. This product has an accuracy of +0.0001" or better. It has an overall length and it has a minimum recommended clearance hole diameter. It can be used for cutting threads on pipe for joining with other pipes or fittings.

Series : P-1005

Thread : BSP

Material : Carbon Steel

Thread Angle : 55°

Type of Product : Cut Thread Hand Tap

Cutting Type : Right Hand

Addison BSCY HSS Ground Thread Hand Tap (Size 5/16 Inch, TPI 26)

Ships within 24 hrs

Addison HSS BSCY Ground Thread Hand Tap

By Addison

Pack of 1 piece

₹494 - ₹7,197

You save ₹170!

23.14% OFF

The Addison HSS BSCY Ground Thread Hand Tap exemplifies precision and reliability in thread cutting operations. Crafted from high-speed steel (HSS), renowned for its durability and resistance to wear, this tap ensures consistent performance even in demanding industrial environments. The BSCY (British Standard Cycle) threading specification it adheres to guarantees compatibility with corresponding nuts and bolts, facilitating seamless integration into various mechanical applications. Distinguished by its ground thread design, this hand tap boasts superior accuracy and efficiency during threading operations. The precise cutting edges enable smooth and clean thread formation, reducing the risk of thread imperfections that could compromise the integrity of connections. Whether used in automotive, aerospace, or general engineering settings, its robust construction and meticulous craftsmanship instill confidence in users seeking dependable thread cutting solutions. Engineered for ease of use, the ergonomic design of the tap facilitates comfortable handling, minimizing operator fatigue during prolonged use. The ground thread geometry, coupled with the inherent strength of HSS, prolongs tool life and minimizes the need for frequent replacements, thus optimizing operational efficiency and reducing downtime. From routine maintenance tasks to high-precision manufacturing processes, the Addison HSS BSCY Ground Thread Hand Tap stands as a testament to quality, precision, and reliability in the realm of thread cutting tools.

Thread : BSCY

Material : HSS

Type of Product : Ground Thread Hand Tap

Standard : BS 949-1951

Addison BS CON (Zone 3) HSS Ground Thread Hand Tap (Size 5/8 Inch)

Ships within 24 hrs

Addison HSS BS Conduit (Zone 3) Ground Thread Hand Tap

By Addison

Pack of 3 piece

₹5,663 - ₹46,019

You save ₹3,316!

31.9% OFF

The Addison HSS BS Conduit (Zone 3) Ground Thread Hand Tap is a precision tool designed for threading conduit fittings in electrical and construction applications. Crafted from high-speed steel (HSS), this tap offers exceptional durability and longevity, capable of withstanding the rigors of repetitive use in demanding environments. Its BS (British Standard) designation ensures compatibility with standardized conduit sizes, guaranteeing precise and accurate threading results. The Zone 3 designation indicates its suitability for use in environments where moderate abrasion and wear resistance are required, making it ideal for a wide range of industrial and commercial settings. The ground thread design ensures smooth and efficient cutting, minimizing the risk of jamming or binding during operation. This feature also enhances thread accuracy and consistency, ensuring a tight and secure fit for conduit fittings. With its ergonomic hand tap design, this tool offers ease of use and maneuverability, allowing operators to achieve uniform and professional results with minimal effort. Whether used in electrical installations, plumbing projects, or general construction applications, the Addison HSS BS Conduit (Zone 3) Ground Thread Hand Tap delivers reliable performance and precision threading capabilities, making it an indispensable tool for tradespeople and professionals alike.

Thread : BS CON (Zone 3)

Material : High Speed Steel

Type of Product : HSS Ground Thread Hand Tap

Standard : BS 949-1951

MIRANDA TOOLS HSS Hand Tap Spiral Point 6G Tin Type Ground Thread Coarse Pitch, Size M3.0 x 0.50 mm

Ships within 3 days

MIRANDA TOOLS HSS Hand Tap Spiral Point 6G Tin Type Ground Thread Coarse Pitch

By MIRANDA TOOLS

₹624 - ₹919

The MIRANDA TOOLS HSS Hand Tap Spiral Point 6G Tin Type Ground Thread Coarse Pitch is designed for demanding threading applications requiring both precision and extended tool life. Manufactured from HSS with a Titanium Nitride (TiN) coating, it delivers excellent hardness, heat resistance, and reduced friction. The spiral point geometry ensures chips are pushed forward, making it particularly suitable for through-hole tapping.The MIRANDA TOOLS HSS Hand Tap Spiral Point 6G Tin Type Ground Thread Coarse Pitch meets 6G tolerance standards for accuracy and fit. Its coarse pitch provides efficient cutting and chip clearance, while the TiN coating ensures durability even under heavy-duty and high-speed operations. This tool is a reliable solution for production workshops and industries requiring consistent thread quality.

Thread : Ground Thread

Material : High Speed Steel

Type of Product : HSS Hand Tap

Pitch Type : Coarse Pitch

Finish Type : Bright Finish

Usage For : Internal Thread formation in Components

Pack of : 1 Pc

Country of Origin : India

Tap Type : Spiral Point 6G Tin

Standard Compliance : IS 6175 - Part 1, 2 & 3 - 1992

TOTEM 14 x 1.25mm TiN Gold HSS Straight Fluted Tap

Ships within 3 days

TOTEM 14 x 1.25mm TiN Gold HSS Straight Fluted Tap

By TOTEM

₹1,769 ~~₹2,074~~

You save ₹305!

14.72% OFF

• Cutting edge geometry production short chips
• Special process for stress relieving on cutting edge
• Radial and axial through coolant taps

MIRANDA TOOLS HSS Hand Tap Straight Flute SO3 Type Ground Thread Coarse Pitch, Size M1.6 x 0.35 mm (Set of 3)

Ships within 3 days

MIRANDA TOOLS HSS Hand Tap Straight Flute SO3 Type Ground Thread Coarse Pitch (Set of 3)

By MIRANDA TOOLS

Set of 3 piece

₹1,297 - ₹2,949

The MIRANDA TOOLS HSS Hand Tap Straight Flute SO3 Type Ground Thread Coarse Pitch (Set of 3) provides a complete threading solution with a set of taper, second, and bottoming taps. Manufactured from premium HSS, these taps deliver durability, accuracy, and sharp cutting action across multiple materials. The straight flute design ensures efficient chip evacuation, while the ground thread finish enhances precision and surface quality. This set is ideal for creating full-depth threads with smooth finishes.The MIRANDA TOOLS HSS Hand Tap Straight Flute SO3 Type Ground Thread Coarse Pitch (Set of 3) is a versatile choice for workshops requiring reliable threading performance. Its coarse pitch allows for faster cutting and effective chip clearance, reducing time spent on operations. With three complementary taps included, users can progress through each stage of threading with accuracy and ease, ensuring professional-quality results in industrial and maintenance applications.

Thread : Ground Thread

Material : High Speed Steel

Type of Product : HSS Hand Tap

Flute Type : Straight Flute

Pitch Type : Coarse Pitch

Finish Type : Bright Finish

Usage For : Internal Thread formation in Components

Country of Origin : India

Tap Type : SO3

Standard Compliance : IS 6175 - Part 1, 2 & 3 - 1992

Inder 20 mm Carbon Steel Cut Thread Left Hand Tap 1004O

Ships within 4 days

INDER Carbon Steel Cut Thread Left Hand Tap P-1004 Series (Size 20-50 mm)

By INDER

Set of 3 piece

₹1,297 - ₹15,339

You save ₹53!

3.92% OFF

The Inder Carbon Steel Cut Thread Left Hand Tap is a precision tool used for creating internal threads in a variety of materials, including carbon steel. This tap is designed to cut threads in a clockwise direction, which is known as a Left-hand thread. The size refers to the diameter of the tap, which is the size of the hole that it will create threads in.
Carbon steel is a popular material for manufacturing due to its strength and durability. However, it can be difficult to work with due to its hardness. The Inder Carbon Steel Cut Thread Left Hand Tap is specifically designed to cut threads in this material, making it an essential tool for machinists and metalworkers.
The cutting process of the tap involves rotating it into the material, which creates a spiral groove in the surface. This groove is then used as a guide for the cutting edges of the tap to create the threads. The tap is designed with a series of flutes that help to remove the material as it is being cut, preventing the tap from becoming clogged or damaged.
The Inder Carbon Steel Cut Thread Left Hand Tap is made from high-quality materials, ensuring that it is durable and long-lasting. It is also designed to be easy to use, with a comfortable grip that allows for precise control during the cutting process.
Overall, the Inder Carbon Steel Cut Thread Left Hand Tap is an essential tool for anyone working with carbon steel. Its precision design and high-quality materials make it a reliable and effective tool for creating internal threads in this challenging material.

Series : P-1004

Material : Carbon Steel

Thread Angle : 60°

Type of Product : Cut Thread Hand Tap

Cutting Type : Left Hand

TOTEM Straight Flute BA Thread Hand Tap (BA Size No. 5)

Ships within 3 days

TOTEM Straight Flute BA Thread Hand Tap (BA Size No. 5)

By TOTEM

Pack of 1 piece

₹683

Features -
TOTEM - Hand Taps [HSS]
- High Speed Steel

TOTEM 6.35 mm (1/4 inch) HSSE TIN Silver Cut Tap FAB0205308

Ships within 3 days

TOTEM 6.35 mm (1/4 inch) HSSE TIN Silver Cut Tap FAB0205308

By TOTEM

₹943 ~~₹1,204~~

You save ₹261!

21.65% OFF

Edge treatment for reduced axial force and torque, makes the tool run more smoothly, reduces risk of cutting-edge chipping and improves surface quality, tool life and chip evacuation The design of the spiral flute secures a constant rake angle and gives a constant cutting process Back chamfer, used on taps with high helix angle, reduces torque and chipping

Addison BSP HSS Parallel Ground Thread Hand Tap 1/8 inch (Pack of 2)

Ships within 3 days

Addison BSP Parallel HSS Ground Thread Hand Tap (Pack of 2)

By Addison

₹1,533 - ₹3,06,799

The Addison BSP Parallel HSS Ground Thread Hand Tap is a precision tool designed for creating accurate threads in various materials. Crafted from high-speed steel (HSS), it boasts exceptional durability and resilience, ensuring prolonged usage without compromising performance. Its ground thread design enhances precision and efficiency during tapping operations, allowing for smoother thread creation with reduced friction. Specifically engineered for BSP (British Standard Pipe) threads, this hand tap is optimized to meet industry standards, making it suitable for a wide range of applications in plumbing, manufacturing, and engineering. The parallel thread configuration ensures compatibility with corresponding fittings and components, facilitating seamless assembly and enhanced functionality. With its ergonomic design, the Addison BSP Parallel HSS Ground Thread Hand Tap offers ease of handling, minimizing operator fatigue and optimizing workflow efficiency. Whether used in workshops, production lines, or maintenance tasks, this tap delivers consistent results, maintaining thread accuracy and integrity. Overall, the Addison BSP Parallel HSS Ground Thread Hand Tap is a reliable and versatile tool, ideal for professionals and DIY enthusiasts alike seeking superior thread cutting performance in BSP applications. Its combination of durability, precision, and ergonomic design makes it a valuable addition to any toolbox or workshop environment.

Thread : BSP

Material : HSS

Type of Product : Parallel Ground Thread Hand Tap

Standard : BS: 949 - 1951

TOTEM BSP Straight Flute HSS Hand Tap 12.7 mm (1/2 Inch) (Pack of 2)

Ships within 3 days

TOTEM BSP Straight Flute HSS Hand Tap 12.7 mm (1/2 Inch) (Pack of 2)

By TOTEM

Pack of 2 piece

₹6,371

These are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.
Hand taps can be supplied in sets of three bottom, second and taper leads, or individually.
Taper Taps have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes.
Second Taps have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom.
Bottom Taps have a chamfer (lead) of 1-2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes.

Inder 18 mm Carbon Steel Cut Thread Left Hand Tap 1004N

Ships within 4 days

INDER Carbon Steel Cut Thread Left Hand Tap P-1004 Series (Size 2-18 mm)

By INDER

Set of 3 piece

₹152 - ₹955

You save ₹79!

7.61% OFF

Series : P-1004

Material : Carbon Steel

Thread Angle : 60°

Type of Product : Cut Thread Hand Tap

Cutting Type : Left Hand

TOTEM 2.5 x 0.45mm TiN Gold HSS Straight Fluted Tap

Ships within 3 days

TOTEM 2.5 x 0.45mm TiN Gold HSS Straight Fluted Tap

By TOTEM

₹660 ~~₹864~~

You save ₹204!

23.59% OFF

• Cutting edge geometry production short chips
• Special process for stress relieving on cutting edge
• Radial and axial through coolant taps

Totem 8x1.25 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0202003 (Pack of 3)

Ships within 5 days

Totem 8x1.25 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0202003 (Pack of 3)

By TOTEM

Pack of 3 piece

₹2,477

Totem presents 8x1.25 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0202003 (Pack of 3). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

TOTEM UNF Straight Flute HSS Hand Tap 5/16 Inch

Ships within 3 days

TOTEM UNF Straight Flute HSS Hand Tap 5/16 Inch

By TOTEM

Pack of 1 piece

₹789

Inder 8 mm Carbon Steel Cut Thread Right Hand Tap 1004G

Ships within 3 days

INDER Carbon Steel Cut Thread Right Hand Tap P-1004 Series (Size 2-18 mm)

By INDER

Set of 3 piece

₹103 - ₹719

The Inder Carbon Steel Cut Thread Right Hand Tap is a precision tool used for creating internal threads in a variety of materials, including carbon steel. This tap is designed to cut threads in a clockwise direction, which is known as a right-hand thread. The size refers to the diameter of the tap, which is the size of the hole that it will create threads in.
Carbon steel is a popular material for manufacturing due to its strength and durability. However, it can be difficult to work with due to its hardness. The Inder Carbon Steel Cut Thread Right Hand Tap is specifically designed to cut threads in this material, making it an essential tool for machinists and metalworkers.
The cutting process of the tap involves rotating it into the material, which creates a spiral groove in the surface. This groove is then used as a guide for the cutting edges of the tap to create the threads. The tap is designed with a series of flutes that help to remove the material as it is being cut, preventing the tap from becoming clogged or damaged.
The Inder Carbon Steel Cut Thread Right Hand Tap is made from high-quality materials, ensuring that it is durable and long-lasting. It is also designed to be easy to use, with a comfortable grip that allows for precise control during the cutting process.
Overall, the Inder Carbon Steel Cut Thread Right Hand Tap is an essential tool for anyone working with carbon steel. Its precision design and high-quality materials make it a reliable and effective tool for creating internal threads in this challenging material.

Series : P-1004

Material : Carbon Steel

Thread Angle : 60°

Type of Product : Cut Thread Hand Tap

Cutting Type : Right Hand

MIRANDA TOOLS M10 x 1.5mm M35 HSS Straight Flute Nib Tap M101503D

Ships within 4 days

MIRANDA TOOLS M35 Series HSS Straight Flute Nib Tap

By MIRANDA TOOLS

₹542 - ₹1,037

You save ₹610!

40.49% OFF

MIRANDA TOOLS M35 Series HSS Straight Flute Nib Tap "Nib Tap" is a revolutionary device designed to enhance the experience of fountain pen enthusiasts. This innovative tool combines modern technology with traditional craftsmanship, catering to the needs of both seasoned writers and newcomers to the world of fountain pens. At its core, Nib Tap serves as a multifunctional accessory for fountain pens, offering features that streamline the writing process and optimize performance. Its sleek and ergonomic design ensures comfortable handling, allowing users to effortlessly control their writing instrument. One of the standout features of Nib Tap is its adjustable nib tuning capabilities. With precision controls, users can fine-tune the characteristics of their pen's nib to suit their writing style, whether they prefer a smoother flow or a more responsive feel. Additionally, Nib Tap includes built-in ink management functions, such as a refill reminder and ink level indicator, ensuring that writers never run out of ink unexpectedly. Furthermore, Nib Tap integrates seamlessly with digital devices through Bluetooth connectivity, enabling users to track their writing habits, monitor ink usage, and access personalized tips for improving their writing technique. In essence, Nib Tap redefines the fountain pen experience by marrying tradition with innovation, offering a modern solution for aficionados who value both performance and convenience in their writing instruments.

Series : M35

Material : HSS

Type of Product : Nib Tap

TOTEM 6.35 mm (1/4 inch) HSSE TIN Silver Cut Tap FAB0204406

Ships within 3 days

TOTEM 6.35 mm (1/4 inch) HSSE TIN Silver Cut Tap FAB0204406

By TOTEM

₹837 ~~₹1,115~~

You save ₹278!

24.94% OFF

TOTEM M20 X 2.5mm HSSE TIALN Silver Cut Tap FAB0200809

Ships within 3 days

TOTEM M20 X 2.5mm HSSE TIALN Silver Cut Tap FAB0200809

By TOTEM

₹3,539 ~~₹4,719~~

You save ₹1,180!

25% OFF

Totem 9/16” Dia Serial Form UNC Thread Hand Tap - FAA0201042 (Pack of 3)

Ships within 5 days

Totem 9/16” Dia Serial Form UNC Thread Hand Tap - FAA0201042 (Pack of 3)

By TOTEM

Pack of 3 piece

₹6,017

Totem presents 9/16” Dia Serial Form UNC Thread Hand Tap - FAA0201042 (Pack of 3). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

MIRANDA TOOLS BOT M4 x 0.7 mm Tialn Platinumcut Tap MC3

Ships within 4 days

MIRANDA TOOLS MC3 BOT Series HSS Straight Flute Platinum Cut Tap

By MIRANDA TOOLS

₹624 - ₹1,651

You save ₹242!

27.17% OFF

MIRANDA TOOLS MC3 BOT Series HSS Straight Flute Platinum Cut Tap Platinum Cut Tap, a revolutionary addition to any modern kitchen. Crafted with precision engineering and elegance in mind, this tap embodies sophistication and functionality like no other. Its sleek platinum finish exudes luxury, elevating the aesthetic of your space. Designed for utmost convenience, the Platinum Cut Tap features a smooth, single-handle operation for effortless temperature and flow control. Its innovative spout design ensures a precise and consistent water stream, perfect for filling pots or rinsing dishes with ease. But it's not just about style – the Platinum Cut Tap is built to last. Constructed from high-quality materials, it promises durability and reliability for years to come. Say goodbye to leaks and drips, as this tap is engineered for leak-free performance. Installation is a breeze, thanks to its user-friendly design and compatibility with standard plumbing connections. Whether you're renovating your kitchen or simply seeking an upgrade, the Platinum Cut Tap is the epitome of luxury and functionality. Transform your daily kitchen routine into a delightful experience with the Platinum Cut Tap – where style meets substance."

Series : BOT

Material : HSS

Type of Product : Platinum Cut Tap

Inder 39 mm Carbon Steel Cut Thread Right Hand Tap 1004X

Ships within 4 days

INDER Carbon Steel Cut Thread Right Hand Tap P-1004 Series (Size 20-50 mm)

By INDER

Set of 3 piece

₹1,108 - ₹12,979

You save ₹1,341!

17.39% OFF

Series : P-1004

Material : Carbon Steel

Thread Angle : 60°

Type of Product : Cut Thread Hand Tap

Cutting Type : Right Hand

Inder 2" - 11 BSPT Carbon Steel Cut Thread Right Hand Tap 1006K

Ships within 4 days

INDER BSPT Carbon Steel Cut Thread Right Hand Taps P-1006 Series

By INDER

Set of 2 piece

₹365 - ₹9,557

You save ₹2,752!

22.35% OFF

The BSPT Carbon Steel Cut Thread Right Hand Tap, model P-1006, is a precision tool engineered for threading tasks. Crafted from high-quality carbon steel, this tap ensures durability and reliability in demanding applications. Its right-hand cut design facilitates efficient threading operations, providing smooth and accurate results. With BSPT (British Standard Pipe Taper) specifications, it conforms to industry standards, guaranteeing compatibility with corresponding fittings and fixtures. The precision-cut threads ensure tight and secure connections, reducing the risk of leaks or loosening over time. Whether used in industrial, mechanical, or plumbing applications, the P-1006 tap delivers consistent performance and exceptional threading accuracy.

Series : P-1006

Thread : BSPT

Material : Carbon Steel

Thread Angle : 55°

Type of Product : Cut Thread Hand Tap

Cutting Type : Right Hand

Inder 1" - 11.1/2 NPT Carbon Steel Cut Thread Right Hand Taps 1006H

Ships within 4 days

INDER NPT Carbon Steel Cut Thread Right Hand Taps P-1006 Series

By INDER

Set of 2 piece

₹365 - ₹9,557

You save ₹192!

6.36% OFF

Introducing the Inder NPT Carbon Steel Cut Thread Right Hand Tap, model P-1006, a precision tool engineered for excellence in threading applications. Crafted from high-quality carbon steel, this tap boasts exceptional durability and performance, ensuring reliable and accurate results. Designed for creating NPT (National Pipe Taper) threads, it adheres to stringent standards, guaranteeing compatibility and consistency in pipe fitting projects. The right-hand cutting design facilitates smooth and efficient threading operations, enhancing productivity and reducing effort. Whether in industrial settings or DIY projects, the Inder NPT Carbon Steel Cut Thread Right Hand Tap P-1006 is your go-to solution for achieving precise and professional thread cutting results, every time.

Series : P-1006

Thread : NPT

Material : Carbon Steel

Thread Angle : 60°

Type of Product : Cut Thread Hand Tap

Cutting Type : Right Hand

TOTEM 12.7 mm (1/2 Inch) HSS UNF TiN Gold Straight Fluted Tap

Ships within 3 days

TOTEM 12.7 mm (1/2 Inch) HSS UNF TiN Gold Straight Fluted Tap

By TOTEM

₹966 ~~₹1,300~~

You save ₹334!

25.71% OFF

• Cutting edge geometry production short chips
• Special process for stress relieving on cutting edge
• Radial and axial through coolant taps

TOTEM 3.5 x 0.6mm TiN Gold HSS Straight Fluted Tap

Ships within 3 days

TOTEM 3.5 x 0.6mm TiN Gold HSS Straight Fluted Tap

By TOTEM

₹435 ~~₹585~~

You save ₹150!

25.68% OFF

• Cutting edge geometry production short chips
• Special process for stress relieving on cutting edge
• Radial and axial through coolant taps

TOTEM M16 X 1.5mm HSSE TIALN Long Silver Cut Tap FAB0203283

Ships within 3 days

TOTEM M16 X 1.5mm HSSE TIALN Long Silver Cut Tap FAB0203283

By TOTEM

₹2,831 ~~₹3,418~~

You save ₹587!

17.18% OFF

Totem 16x2 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0202204 (Pack of 3)

Ships within 5 days

Totem 16x2 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0202204 (Pack of 3)

By TOTEM

Pack of 3 piece

₹6,017

Totem presents 16x2 mm Ground Thread Metric Coarse Pitch Series Hand Tap - FAA0202204 (Pack of 3). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

MIRANDA TOOLS HSS Hand Tap Second BT Type Ground Thread Coarse Pitch, Size M10 x 1.50 mm

Ships within 3 days

MIRANDA TOOLS HSS Hand Tap Second BT Type Ground Thread Coarse Pitch

By MIRANDA TOOLS

₹376 - ₹589

The MIRANDA TOOLS HSS Hand Tap Second BT Type Ground Thread Coarse Pitch is engineered for refining threads during the intermediate stage of the tapping process. Constructed from high-speed steel, it ensures sharp cutting edges, wear resistance, and durability for consistent performance. The BT type geometry enhances accuracy, while the straight flute design allows for effective chip evacuation during cutting.The MIRANDA TOOLS HSS Hand Tap Second BT Type Ground Thread Coarse Pitch is ideal for industrial applications where precision and consistency are required. The coarse pitch configuration ensures faster cutting action and efficient chip clearance. It delivers smooth, accurate threads, making it suitable for general engineering, repair, and precision machining operations. This tap is a dependable tool for workshops requiring reliable intermediate thread cutting performance.

Thread : Ground Thread

Material : High Speed Steel

Type of Product : HSS Hand Tap

Pitch Type : Coarse Pitch

Finish Type : Bright Finish

Usage For : Internal Thread formation in Components

Pack of : 1 Pc

Country of Origin : India

Tap Type : Second BT

Standard Compliance : IS 6175 - Part 1, 2 & 3 - 1992

MIRANDA TOOLS HSS Hand Tap Spiral Flute Tin Type Ground Thread Coarse Pitch, Size M8.0 x 1.25 mm

Ships within 3 days

MIRANDA TOOLS HSS Hand Tap Spiral Flute Tin Type Ground Thread Coarse Pitch

By MIRANDA TOOLS

₹660 - ₹7,433

The MIRANDA TOOLS HSS Hand Tap Spiral Flute Tin Type Ground Thread Coarse Pitch is a high-performance tool for threading blind holes with added durability. Made from HSS and coated with Titanium Nitride (TiN), it provides superior hardness, wear resistance, and reduced friction. Its spiral flute design lifts chips out of the hole, ensuring smooth and efficient cutting.The MIRANDA TOOLS HSS Hand Tap Spiral Flute Tin Type Ground Thread Coarse Pitch is suitable for demanding machining environments where accuracy and tool life are critical. The coarse pitch enhances cutting efficiency, while the TiN coating minimizes heat buildup and ensures prolonged usage. This tap guarantees smooth finishes and reliable threading performance in blind hole applications across a variety of materials.

Thread : Ground Thread

Material : High Speed Steel

Type of Product : HSS Hand Tap

Flute Type : Spiral

Pitch Type : Coarse Pitch

Finish Type : Bright Finish

Usage For : Internal Thread formation in Components

Pack of : 1 Pc

Country of Origin : India

Tap Type : Spiral Flute Tin

Standard Compliance : IS 6175 - Part 1, 2 & 3 - 1992

MIRANDA TOOLS HSS Left Hand Tap Straight Flute Second Type, Size M6.0 x 1.00 mm

Ships within 3 days

MIRANDA TOOLS HSS Left Hand Tap Straight Flute Second Type

By MIRANDA TOOLS

₹565 - ₹6,607

The MIRANDA TOOLS HSS Left Hand Tap Straight Flute Second Type is designed for creating left-hand threads in through holes. Made from premium HSS, it provides strength, accuracy, and durability. The second type geometry allows efficient cutting, making it ideal for general-purpose applications where reverse threading is required.The MIRANDA TOOLS HSS Left Hand Tap Straight Flute Second Type is commonly used in engineering, automotive, and specialized manufacturing processes that require left-hand threading for mechanical locking or reverse assembly. Its robust construction ensures reliable thread formation and long tool life, making it a dependable solution for left-hand threading needs.

Material : High Speed Steel

Type of Product : Left Hand Tap

Flute Type : Straight Flute

Usage For : Internal Thread formation in Components

Country of Origin : India

Tap Type : Second

TOTEM BSP Straight Flute HSS Hand Tap 1/8 Inch (Pack of 2)

Ships within 3 days

TOTEM BSP Straight Flute HSS Hand Tap 1/8 Inch (Pack of 2)

By TOTEM

Pack of 2 piece

₹2,241

MIRANDA TOOLS Spirex M8 x 1.25 mm Tialn Platinum Cut Tap MB3

Ships within 4 days

MIRANDA TOOLS MB3 Spirex Series HSS Spiral Flute Platinum Cut Tap

By MIRANDA TOOLS

₹813 - ₹2,359

You save ₹468!

32.62% OFF

MIRANDA TOOLS MB3 Spirex Series HSS Spiral Flute Platinum Cut Tap Platinum Cut Tap, a revolutionary addition to any modern kitchen. Crafted with precision engineering and elegance in mind, this tap embodies sophistication and functionality like no other. Its sleek platinum finish exudes luxury, elevating the aesthetic of your space. Designed for utmost convenience, the Platinum Cut Tap features a smooth, single-handle operation for effortless temperature and flow control. Its innovative spout design ensures a precise and consistent water stream, perfect for filling pots or rinsing dishes with ease. But it's not just about style – the Platinum Cut Tap is built to last. Constructed from high-quality materials, it promises durability and reliability for years to come. Say goodbye to leaks and drips, as this tap is engineered for leak-free performance. Installation is a breeze, thanks to its user-friendly design and compatibility with standard plumbing connections. Whether you're renovating your kitchen or simply seeking an upgrade, the Platinum Cut Tap is the epitome of luxury and functionality. Transform your daily kitchen routine into a delightful experience with the Platinum Cut Tap – where style meets substance."

Series : Spirex

Material : HSS

Type of Product : Platinum Cut Tap

TOTEM M18 X 1.5mm HSSE TIALN Silver Cut Tap FAB0200805

Ships within 4 days

TOTEM M18 X 1.5mm HSSE TIALN Silver Cut Tap FAB0200805

By TOTEM

₹3,657 ~~₹4,620~~

You save ₹963!

20.84% OFF

TOTEM M20 X 2.5mm HSSE TIN Silver Cut Tap FAB0205430

Ships within 3 days

TOTEM M20 X 2.5mm HSSE TIN Silver Cut Tap FAB0205430

By TOTEM

₹4,247 ~~₹5,468~~

You save ₹1,221!

22.33% OFF

Totem 10x1.25 mm Metric Fine Pitch Series Hand Tap - FAA0202786 (Pack of 2)

Ships within 5 days

Totem 10x1.25 mm Metric Fine Pitch Series Hand Tap - FAA0202786 (Pack of 2)

By TOTEM

Pack of 2 piece

₹2,477

Totem presents 10x1.25 mm Metric Fine Pitch Series Hand Tap - FAA0202786 (Pack of 2). Totem is a brand that has been making high quality, precision tools for more than 40 years. Made from high speed steel, these hand taps are used for forming threaded holes inside a piece of material. The taps feature a spiral point with a cutting angle of about 15 degrees which results in a thread that is both larger and sharper than one produced by a standard plug tap. The cutting edge is ground with a 5/16" radius which allows the taps to produce threads with better strength and durability when compared to similar tools.
Made of High Speed Steel, these hand taps are used for forming threaded holes inside a piece of material. The tap is screwed into the hole at a specific angle and is then turned, creating threads in the hole to which a screw can be attached. These hand taps are featured in a 2-piece set with a tap handle, or in a 3-piece set that includes an extra tap handle in case one breaks.
The taps are designed to be used with a hand tool called an arbor press. To use, begin by selecting the correct sized tap for the job. Then, place the tap into the arbor press on top of the threaded hole you want to create. In order to accurately create threads, the hole you're tapping into should be as perfectly round as possible—this can be accomplished using an end mill or reamer or by using a lathe if you have access to one. When using the arbor press, apply pressure slowly and evenly down onto the top of the tap while simultaneously turning it with your hand until it reaches its maximum depth in the hole.

MIRANDA TOOLS HSS Hand Tap Straight Flute Taper Type Ground Thread Coarse Pitch, Size M21 x 2.50 mm

Ships within 3 days

MIRANDA TOOLS HSS Hand Tap Straight Flute Taper Type Ground Thread Coarse Pitch, Size M17 to M60

By MIRANDA TOOLS

₹2,359 - ₹37,759

The MIRANDA TOOLS HSS Hand Tap Straight Flute Taper Type Ground Thread Coarse Pitch, Size M17 to M60 is engineered for threading larger diameter holes with precision and ease. Featuring a taper type flute geometry, it provides smooth cutting action and efficient chip removal, reducing the likelihood of breakage during heavy-duty operations. Constructed from high-grade HSS, this tap ensures durability, wear resistance, and long service life under continuous industrial use.The MIRANDA TOOLS HSS Hand Tap Straight Flute Taper Type Ground Thread Coarse Pitch, Size M17 to M60 is ideal for general engineering, fabrication, and repair work where large threads are required. Its ground thread design guarantees accuracy, while the coarse pitch configuration facilitates rapid cutting with strong chip clearance. Whether used manually or with tapping machines, it delivers reliable threading performance across a wide variety of materials, making it a dependable tool for industrial workshops.

Thread : Ground Thread

Material : High Speed Steel

Type of Product : HSS Hand Tap

Flute Type : Straight Flute

Pitch Type : Coarse Pitch

Finish Type : Bright Finish

Usage For : Internal Thread formation in Components

Pack of : 1 Pc

Country of Origin : India

Tap Type : Taper

Standard Compliance : IS 6175 - Part 1, 2 & 3 - 1992

MIRANDA TOOLS HSS Hand Tap Spiral Flute 6G Tin Type Ground Thread Coarse Pitch, Size M6.0 x 1.00 mm

Ships within 3 days

MIRANDA TOOLS HSS Hand Tap Spiral Flute 6G Tin Type Ground Thread Coarse Pitch

By MIRANDA TOOLS

₹754 - ₹1,025

The MIRANDA TOOLS HSS Hand Tap Spiral Flute 6G Tin Type Ground Thread Coarse Pitch is crafted from high-speed steel and features a titanium nitride (TiN) coating for improved durability and performance. Its spiral flute design is ideal for threading blind holes, efficiently evacuating chips to prevent clogging and breakage. The 6G tolerance ensures accurate and reliable internal threading, while the TiN coating reduces friction and enhances wear resistance, extending tool life. This makes it suitable for working with tough alloys, stainless steel, and high-strength materials.The MIRANDA TOOLS HSS Hand Tap Spiral Flute 6G Tin Type Ground Thread Coarse Pitch is commonly used in precision engineering, automotive, and mold-making industries. Its ability to provide clean, accurate threads with minimal tool wear makes it a dependable choice for professional machinists. The combination of 6G precision, spiral flute efficiency, and TiN-coated strength ensures consistent performance in demanding threading applications.

Thread : Ground Thread

Material : High Speed Steel

Type of Product : HSS Hand Tap

Flute Type : Spiral

Pitch Type : Coarse Pitch

Finish Type : Bright Finish

Usage For : Internal Thread formation in Components

Pack of : 1 Pc

Country of Origin : India

Tap Type : Spiral Flute 6G Tin

Standard Compliance : IS 6175 - Part 1, 2 & 3 - 1992

TOTEM UNF Straight Flute HSS Hand Tap 7/16 Inch

Ships within 3 days

TOTEM UNF Straight Flute HSS Hand Tap 7/16 Inch

By TOTEM

Pack of 1 piece

₹1,415

TOTEM BSW Straight Flute HSS Hand Tap 5/8 Inch (Pack of 3)

Ships within 3 days

TOTEM BSW Straight Flute HSS Hand Tap 5/8 Inch (Pack of 3)

By TOTEM

Pack of 3 piece

₹7,197

Page 1 of 116 results

Top Selling Hand Taps Products Price List for December 2025

Product Name	Specifications	Expected Price	Dispatch Time	Discount
Inder 3/4" - 14" BSP Carbon Steel Cut Thread Right Hand Taps 1005F	Cutting Type Right Hand \| Material Carbon Steel	₹1,073	4 days	8.06% OFF
Totem 3/4” Dia Serial Form BSW Thread Hand Tap - FAA0200211 (Pack of 3)	Class Class 2 \| Form Type Serial Form	₹8,967	5 days	--
Indian Tools HSS Hand Tap 6 mm	Material HSS \| Pitch Size 6 mm	₹412	3 days	64.12% OFF
TOTEM 4 x 0.7mm TiN Gold HSS Straight Fluted Tap	Finish Type TiN Gold \| Material HSS	₹435	3 days	25.68% OFF
TOTEM 2.5 x 0.45mm TiN Gold HSS Straight Fluted Tap	Finish Type TiN Gold \| Material HSS	₹660	3 days	23.59% OFF
TOTEM 14 x 1.25mm TiN Gold HSS Straight Fluted Tap	Finish Type TiN Gold \| Material HSS	₹1,769	3 days	14.72% OFF
TOTEM 2 x 0.4mm TiN Gold HSS Straight Fluted Tap	Finish Type TiN Gold \| Material HSS	₹671	3 days	22.32% OFF
TOTEM M3 X 0.5mm HSSE TICN Silver Cut Tap FAB0204616	Finish Type TICN \| Material HSS-E	₹660	3 days	20.32% OFF
TOTEM 3/16 Inch HSS UNC TiN Gold Straight Fluted Tap	Finish Type TiN Gold \| Grade BS - 949	₹565	4 days	6.11% OFF

This data was last updated on 06/12/2025

Know All About Hand Taps Here

Hand taps, essential tools in metalworking, are designed for threading holes manually. These precision tools create internal threads with accuracy and efficiency. Commonly used with a tap wrench, they come in various sizes and materials, ensuring versatility for different applications.

Key Features:
a) Precision Threading: They provide accurate and controlled threading in various materials.
b) Versatility: Different sizes and materials are available to suit diverse threading needs.
c) Ease of Use: Typically used with a tap wrench for manual operation.
d) Durability: Crafted from high-quality materials to ensure longevity and resistance to wear.

How do Hand Taps Work?

Hand tap tool gradually cut into a pre-drilled hole, forming threads that match the tap's specifications. The process involves several steps:

i) Pre-Drilling: With the help of these taps or drilling tools, a hole is drilled into the material to accommodate the tap.
ii) Alignment: The hand tap machine is aligned with the hole, ensuring proper threading.
iii) Cutting Threads: With each turn, the hand tap cuts into the material, creating internal threads.
iv) Retraction: Periodically, the tap is reversed to break and clear chips for smoother threading.

Key Advantages:
a) Manual Control: Users have precise control over the threading process.
b) Versatile Applications: Suitable for various materials, including metal, wood, and plastic.
c) Cost-Effective: Ideal for small-scale projects where a power tap may not be necessary.

Where are they commonly used?

Hand tap tools are indispensable tools in metalworking and machining, widely used for threading operations. These versatile tools find typical applications in various industries, providing precision and efficiency in creating internal threads in materials such as metal and wood. Let's explore where hand taps are commonly used and the available types.

Common hand-taps uses:
They are frequently employed in the following industries and scenarios:

i) Metalworking: Hand tap tools are extensively used in metalworking operations, including manufacturing, fabrication, and machining processes.
ii) Woodworking: They facilitate the creation of threaded holes in wooden components in carpentry and woodworking.
iii) Repair and Maintenance: Hand taps are essential for repair and maintenance tasks, allowing for the restoration of threaded connections.

Shop this product and other useful tools like cutting blades from our website at wholesale rates.

What are the types of Hand Taps?

Different hand taps cater to specific threading needs:

1. Straight Flute Taps: Ideal for general-purpose threading, ensuring efficient chip evacuation.
2. Spiral Flute Taps: Designed for tapping blind holes, promoting effective chip removal and smoother operation.

Professionals in the tools and cutting industry can explore various hand taps to meet their specific requirements, ensuring precision and durability in threading operations. As part of the tools and missing category, these tools play a crucial role in maintaining accuracy and efficiency in various machining applications.

What are the advantages of Hand Taps?

Hand taps offer a range of advantages, making them indispensable tools in metalworking and woodworking. Hand taps uses and benefits include:

i) Versatility: They are versatile tools suitable for various applications, from creating threads in metal to woodworking projects.
ii) Ease of Use: Hand tap tools are user-friendly for manual operation, allowing for precise control during threading operations and working with other inserts.
iii) Cost-Effective: They are a cost-effective solution compared to automated threading machines, making them accessible for various industries and workshops.
iv) Portability: They are portable and do not require a power source, providing flexibility in diverse working environments.

Why Choose Industrybuying?

Industrybuying is a reliable source for procuring hand tap machines and related accessories, offering a seamless shopping experience. Here's why you should choose Industrybuying:

a) Wide Selection: Industrybuying provides a diverse range of hand taps, ensuring customers find the right tool for their needs.
b) Quality Assurance: All products, including hand taps, undergo stringent quality checks, ensuring durability and performance.
c) Convenient Online Platform: With a user-friendly website, Industrybuying makes the selection and purchase process convenient, allowing customers to easily browse and buy hand taps.
d) Expert Guidance: Industrybuying provides specialist guidance and product information, assisting customers in making informed decisions.
e) Prompt Delivery: Timely delivery of products, including hand taps, is a priority, ensuring customers receive their orders on time.

What brands of hand tapes are available at Industrybuying?

Explore a wide array of hand tap machine from renowned brands in the tools and cutting category. These brands prioritise precision, durability, and efficiency in their products:

a) TOTEM: Renowned for its extensive range of high-quality hand tools, Totem offers reliable hand taps and cutters designed for various threading applications.
b) YG-1: A trusted name in the cutting tool industry, YG-1 provides precision-engineered hand taps suitable for diverse machining needs.
c) Dolphin: With a legacy of excellence, Dolphin offers a comprehensive selection of hand taps, ensuring top-notch performance and longevity.