Century 2 mm Tip Size Tamper Check Paste

Century 2 mm Tamper Check Paste. is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, Joints and assemblies. Highly visible fluorescent Colours & Excellent adhesion as well as safe on metal & all other surfaces. Tamper Check also provides warranty protection against tampering. Marks will be easily broken if parts are tampered with or become loose. High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement. Provides a Convenient visual method for identification of vibratory loosening or tempering on nuts, bolts, Fasteners, and assemblies. It’s also called Tamper proof marking or Torque marking paste.

Directs of Use:

• Open Cap. Hold the marker vertically and squeeze the tube from bottom to Write
• Clean the tip and put the cap back on after each use.
• Use before 24 months for better results.
• Drying Time

  Dry to Touch	30-40 Minutes
  80% Curing	48-72 Hours
  Full Curing	7-10 Days

Note: Drying will speed up on elevated temperature or on blowing of hot air.

Storage:

• Store locked up.
• Keep away from heat, sparks and open flame.
• Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out of direct sunlight.
• Store in a tightly closed container as well as a ventilated place.

Caution:

• Protect material from direct sunlight.
• When using, do not smoke.
• Explosion-proof general and local exhaust ventilation.
• Take precautionary measures against static discharges.
• All equipment used when handling the product must be grounded.
• Use non-sparking tools and explosion-proof equipment.
• Avoid contact with eyes.
• Avoid prolonged exposure.
• Wear appropriate personal protective equipment.
• Observe good industrial hygiene practices

Disposal:

• Collect and reclaim or dispose in sealed containers at licensed waste disposal sites.
• Dispose of contents/container in accordance with local/regional/national/international regulations.