Schneider Electric Dig 24 V (DC) Sink

The "Schneider Electric Dig 24V (DC) Sink" module is likely a digital input module designed to operate with a 24-volt direct current (DC) power supply in a sinking configuration. Let's break down its key features: 1. **Digital Input (Dig):** This module is intended to receive digital input signals, which are binary in nature, typically representing an "on" or "off" state. Digital inputs are commonly used to interface with sensors, switches, or other devices that provide binary signals. 2. **24V DC:** The module operates with a 24-volt DC power supply. This voltage specification indicates the power requirements of the module and is important for compatibility with the overall system. In this case, the module requires a 24V DC power source to function properly. 3. **Sink Configuration:** The term "Sink" refers to the type of digital input configuration supported by the module. In a sinking configuration, the module provides a path to ground for the external device when the input signal is active (i.e., when it's in the "on" state). This means that the external device is responsible for supplying the voltage, and the module sinks the current when the input is activated. Overall, the "Schneider Electric Dig 24V (DC) Sink" module is designed to interface with external devices that provide digital signals in a sinking configuration, operating with a 24-volt DC power supply. It is suitable for applications where precise digital input sensing is required, such as monitoring the state of switches, sensors, or other digital devices in industrial automation systems.