• Home /
• All Brands /
• Algo /
• Pumps /
• Sewage Pumps /
• Dewatering Sump Pumps

Have a question? Call us now at +91 9650660070

Algo Dewatering Sump Pumps

Showing 40 out of 40 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 8 days

Algo 0.5 HP 0.37Kw Waste Water Pump with Cutter SC-06/03S

By Algo

₹15,339   ₹19,617

You save ₹4,278!

21.81% OFF

The Algo 0.5 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo 7.5 HP 5.5Kw Waste Water Pump with Cutter SC-65/G55T

By Algo

₹89,679   ₹1,21,411

You save ₹31,732!

26.14% OFF

The Algo 7.5 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo 3 HP 2.2Kw Waste Water Pump with Cutter SC-25/F22T

By Algo

₹46,019   ₹60,151

You save ₹14,132!

23.49% OFF

The Algo 3 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 8 days

Algo Ronda-10 1 Phase Submersible Slurry Pump 0.75 KW

By Algo

₹18,879  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Ships within 7 days

Algo 1 HP 0.75Kw Waste Water Pump with Cutter SC-10/07S/T

By Algo

₹29,499   ₹37,272

You save ₹7,773!

20.85% OFF

The Algo 1 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo SV-10/D07S 1 Phase Waste Water Pump 0.75 KW

By Algo

₹17,699  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 8 days

Algo SV-15/D15S 1 Phase Waste Water Pump 1.5 KW

By Algo

₹21,239  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Zingo-10 1 Phase Dewatering Pump 0.75 KW

By Algo

₹8,377  

Dewatering pumps are used to remove water from the ground. They are also known as utility pumps, submersible pumps and trash pumps. The dewatering pump is a centrifugal pump that is used wherever you need to remove water. You can use the pump at construction sites, in tunnels and mines and also in buildings where you need to remove unwanted water. You can use dewatering pumps for both commercial and residential purposes. Many people use them in their homes as well as businesses because they're cost effective and easy to install. The only downside to using these pumps is that they require maintenance from time to time so that they don't stop working properly or break down on you unexpectedly. What can I use to pump out water? Utility pumps are used for short-term purposes or emergencies to transfer liquids from one place to another. If you're just moving water, go with a utility pump. However, if the water contains debris or solids, go with a trash pump or sewage pump, instead.

Add to Cart Buy Now

Ships within 7 days

Algo 10 HP 7.5Kw Waste Water Pump with Cutter SC-A0/G75T

By Algo

₹1,02,659   ₹1,39,853

You save ₹37,194!

26.6% OFF

The Algo 10 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 8 days

Algo Ronda-10 3 Phase Submersible Slurry Pump 0.75 KW

By Algo

₹18,879  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Ships within 8 days

Algo SV-10/D07T 3 Phase Waste Water Pump 0.75 KW

By Algo

₹16,519  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Ronda-80 3 Phase Submersible Slurry Pump 6 KW

By Algo

₹3,06,799  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Ships within 7 days

Algo 2 HP 1.5Kw Waste Water Pump with Cutter SC-15/15S/T

By Algo

₹38,939   ₹50,913

You save ₹11,974!

23.52% OFF

The Algo 2 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo SD-25/F22T 3 Phase Waste Water Pump 2.2 KW

By Algo

₹40,119  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Zingo-05 1 Phase Dewatering Pump 0.4 KW

By Algo

₹6,961  

Dewatering pumps are used to remove water from the ground. They are also known as utility pumps, submersible pumps and trash pumps. The dewatering pump is a centrifugal pump that is used wherever you need to remove water. You can use the pump at construction sites, in tunnels and mines and also in buildings where you need to remove unwanted water. You can use dewatering pumps for both commercial and residential purposes. Many people use them in their homes as well as businesses because they're cost effective and easy to install. The only downside to using these pumps is that they require maintenance from time to time so that they don't stop working properly or break down on you unexpectedly. What can I use to pump out water? Utility pumps are used for short-term purposes or emergencies to transfer liquids from one place to another. If you're just moving water, go with a utility pump. However, if the water contains debris or solids, go with a trash pump or sewage pump, instead.

Add to Cart Buy Now

Ships within 8 days

Algo SV-15/D15T 3 Phase Waste Water Pump 1.5 KW

By Algo

₹21,239  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo 5 HP 3.7Kw Waste Water Pump with Cutter SC-65/F37T

By Algo

₹66,079   ₹88,554

You save ₹22,475!

25.38% OFF

The Algo 5 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-10S 1 Phase Waste Water Pump 0.75 KW

By Algo

₹27,139  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 8 days

Algo Ronda-05 3 Phase Submersible Slurry Pump 0.37 KW

By Algo

₹14,159  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Ships within 7 days

Algo 4 HP 3Kw Waste Water Pump with Cutter SC-45/F30T

By Algo

₹55,459   ₹74,361

You save ₹18,902!

25.42% OFF

The Algo 4 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo 1.5 HP 1.1Kw Waste Water Pump with Cutter SC-12/11S/T

By Algo

₹30,679   ₹38,763

You save ₹8,084!

20.85% OFF

The Algo 1.5 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 8 days

Algo Hynox-15NS 1 Phase Waste Water Pump 1.1 KW

By Algo

₹15,339  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo SD-45/F37T 3 Phase Waste Water Pump 3.7 KW

By Algo

₹57,819  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo SV-3-03S 1 Phase Waste Water Pump 0.37 KW

By Algo

₹15,339  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Ronda-120 3 Phase Submersible Slurry Pump 9 KW

By Algo

₹3,42,199  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Ships within 7 days

Algo Ronda-55 3 Phase Submersible Slurry Pump 4 KW

By Algo

₹2,59,599  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Ships within 7 days

Algo 5.5 HP 4Kw Waste Water Pump with Cutter SC-65/G40T

By Algo

₹67,259   ₹90,657

You save ₹23,398!

25.81% OFF

The Algo 5.5 HP Waste Water Pump with Cutter Series jawa is a professional grade device that provides the optimum level of performance while ensuring high durability and efficiency. This water pump is ideal for waste water/gray water applications and can be connected to a dedicated drainage system with ease. It features an 8mtr cable length, 2900RPM speed, cast iron pump case and more.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-30T 3 Phase Waste Water Pump 2.2 KW

By Algo

₹43,659  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-20T 3 Phase Waste Water Pump 1.5 KW

By Algo

₹33,039  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-20S 1 Phase Waste Water Pump 1.5 KW

By Algo

₹33,039  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-15S 1 Phase Waste Water Pump 1.1 KW

By Algo

₹28,319  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-10NS 1 Phase Waste Water Pump 0.75 KW

By Algo

₹14,159  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Hynox-05NS 1 Phase Waste Water Pump 0.37 KW

By Algo

₹12,979  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo SD-A0/G75T 3 Phase Waste Water Pump 7.5 KW

By Algo

₹88,499  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo SD-65/G55T 3 Phase Waste Water Pump 5.5 KW

By Algo

₹76,699  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo SD-45/G40T 3 Phase Waste Water Pump 4 KW

By Algo

₹60,179  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo SD-20/F22T 3 Phase Waste Water Pump 2.2 KW

By Algo

₹29,499  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 8 days

Algo SV-13/D11T 3 Phase Waste Water Pump 1.1 KW

By Algo

₹17,699  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 8 days

Algo SV-13/D11S 1 Phase Waste Water Pump 1.1 KW

By Algo

₹17,699  

Wastewater pumps are a class of submersible pump that are designed to handle solids-laden wastewater, effluent and sewage. Wastewater pumps can be implemented for pumping at purification plants, pumping from septic tanks, rainwater pits along roads and for pumping grey wastewater with no content of toilet matter. Wastewater pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe. The sewage pump is powered through a 10-25 ft power cord that connects directly to an outlet near your water source. Sewage pumps are usually used in homes where there is no sewer system or septic tank to remove waste water from your house. Sewage pumps can also be used in commercial buildings where there is no plumbing system or drainage system in place. The main purpose of sewage pumps is to remove water from basements or crawl spaces so they don't flood during heavy rains or when ice melts on them during winter months.

Add to Cart Buy Now

Ships within 7 days

Algo Ronda-05 1 Phase Submersible Slurry Pump 0.37 KW

By Algo

₹15,339  

Submersible slurry pumps are used for pumping sand and slurry in the dredging, quarrying and mining industries. All Stormy models are made of wear-resistant materials and come standard with an agitator for loosening solids under water. To operate a submersible slurry pump, you'll need a power washer and a heavy wall discharge hose. The hose must be equipped with a quick disconnect at one end so that it can be connected to the pump's discharge port. The power washer must have sufficient pressure energy to create suction in the discharge hose - 87 GPM is typical for this application. You can connect your power washer directly to your submersible slurry pump or you can use a high pressure nozzle on your wand to create suction in the discharge hose by spraying water at high pressure through the wand. When using a high pressure nozzle, make sure it has an automatic shutoff feature so that it doesn't overheat or leak when not operating properly! Attach one end of the discharge hose to your submersible pump's discharge port and then attach

Add to Cart Buy Now

Previous Next

Page 1 of 1 results