Have a question? Call us now at +91 9650660070

care@industrybuying.com

Cooper Bussmann

Showing 19 out of 19 products

Sort by

Ships within 5 days

Cooper Bussmann Midget Fuse - FNQ-R-5

By Cooper Bussmann

₹2,477

The Midget Fuse FNQ-R-5 from Cooper Bussmann is a miniature quick-acting fuse that has been around since the early 1900s. It is a thin wire of pure copper that is coated in an insulating layer. When the current passes across its surface, the copper wire heats up and melts, breaking the path of electricity. The heat generated is not enough to cause an overcurrent trip for other fuses in series with it. It is mounted in a D-shaped glass fuse holder with a black phenolic base, and has been known to be used in many applications such as medical equipment, toys, and appliances.
Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5, is a fuse designed to switch high currents and voltages. Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5 are used for power distribution in industrial applications and other similar applications. They are used for protection in a circuit connected load or devices against excess current and voltage. These fuses consist of a glass tube filled with fused silica gel and conductive particles. These fuses have a quick response time and high interrupting capacity. They are easy to handle and can be used interchangeably with other fuse types.
Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5 can withstand intermittent or continuous overloads as well as short circuit condition up to its rated current for the specified period of time without any damage or change in performance. Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5 is resistant to vibration, impact, moisture, corrosion and thermal shock.

Cooper Bussmann 600VAC 300VDC Low Peak Time Delay Fuse - LP-CC-15

Ships within 5 days

Cooper Bussmann 600VAC 300VDC Low Peak Time Delay Fuse - LP-CC-15

By Cooper Bussmann

₹4,011

When you're choosing a fuse for your application, there are many considerations that must be made. The size of the current draw, the amount of energy stored in the circuit and even the physical size of the fuse are all factors to review when making your selection. First and foremost, the fuse must be selected based on its current-carrying capacity. This value is expressed in amperes (A). A general rule of thumb is to select a fuse with a current-handling capacity that is 20% greater than the maximum fuse current rating. As an example, if you are designing a circuit that will carry a peak current rating of 5 amperes, then you need to select a fuse that can carry at least 6 amperes.
Cooper Bussmann's 600VAC 300VDC Low Peak Time Delay fuses are designed to protect against current surges and overloading at the source point. A surge of higher than normal voltage in a power supply may cause an arc, which could damage the fuse if not contained. This can lead to premature failure of the fuse, which will no longer protect the device. The Low Peak Time Delay feature is designed to prevent this by containing the arc within the fuse until it burns out. This reduces total energy required to blow the fuse and increases its service life.
The Cooper Bussmann Low Peak time Delay Fuse is rated 600 Volts AC and 300 Volts DC. It has a current rating of 20 Amps and a peak current rating of 50 Amps. The time delay temperature rise is 158 degrees. The glass case fuse is made of Boro Silicate Glass, the wire are made of Copper Alloy and the interlink is made of Polyester/Polyamide. The type of fuse is Medium Voltage/Medium Current.

Cooper Bussmann 44mA 1000V Fuse Combo for Fluke Multimeter - DMM-11AR and DMM-44/100

Ships within 4 days

Cooper Bussmann 44mA 1000V Fuse Combo for Fluke Multimeter - DMM-11AR and DMM-44/100

By Cooper Bussmann

₹2,005

Cooper Bussmann 44mA 1000V Fuse Combo for Fluke Multimeter - DMM-11AR and DMM-44/100: An excellent addition to the Fluke multimeter line, this fuse combo pack from Cooper Bussmann is an affordable alternative to replacement fuses. It includes both types of fuse required by the Fluke multimeters: a 1000V (max) slow blow fuse and a 200mA fast blow fuse. The slow blow fuse is used in the case where there is a long-term fault condition, while the fast blow fuse is used in cases of short-term fault conditions. Its slim design makes it easy to store with your meter or keep on hand as you work.
If you're like me, when you need a replacement fuse for your multimeter, you head to Amazon and try to find one that's both reasonably priced and has good reviews. Unfortunately, most of the options available don't have many reviews at all, and those that do rarely have more than two stars. This particular product from Cooper Bussmann has four stars based on 12 customer reviews—much more reassuring than most other choices out there. It also comes in at about half the price of most options out there with comparable ratings.
There's always the risk of electrical shock when working with electricity, and it's important to have the right tools to protect yourself. Fluke has a wide range of multimeters that are appropriate for both professional and personal use, but if you're looking for a way to protect your meter with an inline fuse, Cooper Bussmann's fuse combo is an ideal choice. This 44 milliamp 1000 volt fuse safely protects your multimeter by acting as a circuit breaker should anything go wrong with your wiring.

Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100

Ships within 2 days

Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100

By Cooper Bussmann

₹1,415

The Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100 is a fuse used to protect the circuit board of the Fluke digital multimeter from any short circuits that could cause damage to the multimeter. This fuse is designed to be used with the Fluke digital multimeter, providing safety and protection for the circuit board and its components.
Fuses are very important in high-voltage electrical systems, as they provide a vital component that can help prevent major damage to critical components. When short circuits occur, fuses become very hot and melt, which disconnects the circuit and prevents further damage to components. This helps ensure that electricity cannot flow through a circuit and continue causing damage, which can lead to serious problems such as fire or explosions.
For use as a replacement fuse with the Fluke digital multimeter, this fuse is specifically made for the Fluke DMM-44/100 series of meters. The fuse is packaged individually in a plastic bag without any additional packaging materials or instructions.
The Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100 is a precision engineered component to ensure the safety of your device. This fuse has a current rating of 0.4A and an interrupt rating of 1000V. This component is double-sealed in a vacuum packed glass tube to ensure that the product you receive will be free of defects.

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP

Ships within 5 days

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP

By Cooper Bussmann

₹3,539

The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP is designed to provide protection for electrical and electronic equipment in the event of an overload or short circuit. The fuse is rated at 15 Amp and 125 VAC, with a time delay of less than 5 ms. The Class J requires a current surge of greater than 3 x In to trip, which makes it ideal for applications that use inductive or capacitive loads.
These Fuses are designed for use in low voltage circuits including: household appliances, power tools, lighting fixtures and home theaters. The Class J fuse is a time delay fuse with a peak current rating of 12 amps and a time delay of 1.5 seconds at 120V AC and 60Hz.
The LPJ-12SP is a Class J Low Peak Time Delay Fuse, with a maximum operating voltage of 600V and amperage rating of 12A. It is rated at a maximum peak inverse voltage of 1200V and has a delay rating of 0.025ms. The fuse's amperage rating is within the range of Class J fuses, which makes it ideal for use with power distribution systems that operate below 600V.
The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP is a fast-acting fuse that can be used in your residential, commercial and industrial circuits. These fuses are designed to protect electrical line and equipment from high voltage surges, and they are rated at 12kV. The Class J fuse is easy to install. It has a silver finish, and it has a time delay of .001 second.

Cooper Bussmann 11A 1000V DMM Fuse for Fluke Multimeter 15B - DMM 11AR

Ships within 5 days

Cooper Bussmann 11A 1000V DMM Fuse for Fluke Multimeter 15B - DMM 11AR

By Cooper Bussmann

₹2,241

The Cooper Bussmann 11A 1000V DMM fuse for Fluke multimeter 15B is a fuse that is used on the line side of wiring and other connections in order to protect them from electrical overload. It is also used in any situation where there is a possibility of an overload, such as with power tools, motors, generators and other applications where there is a high amount of current being drawn. The fuse is rated at 11 amps and 1000 volts.
The first thing to consider is that you need to replace the fuse with an identical fuse. The reason is that you will be using the same kind of fuse holder as the original, and different types of fuses require different types of holders. For example, if you use a standard-size fuse in a miniature fuse holder, it will not fit; likewise, if you try to use a miniature fuse in a standard holder, it will not fit. So make sure that you get the same type of fuse as before.
Before replacing the fuse, you must remove the old one. To do this, simply pull it out with your fingers. There are two ways you can tell whether or not it has been removed: 1) there should be no resistance when pulling it out, and 2) there should be a small metal disc showing through where the hole was in the plastic case. If there is any resistance or no disc showing through, then you must pull harder until you either remove it or break it off inside the fuse holder.
To install a new one, push it into place until it "clicks." You'll know this has happened when you hear or feel something click into place inside the holder itself.

Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3

Ships within 5 days

Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3

By Cooper Bussmann

₹1,651

The Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3 is a glass tube fuse of different amps. The product is found in most electrical devices, such as household appliances, lightings, and motors among others. The fuse has been tested to meet the specification of the National Electrical Manufacturer Association. It is also made of materials that are flame retardant. This fuse is suitable for any circuits that use up to 13 amps.
The Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3 is a 50 millimeter long, glass tube fuse for use with AC or DC fuses up to 600 volts. This fuse features a high quality design that is ideal for any application that requires a high level of safety and reliability. The AGC3 will prevent fires caused by electrical overloads or short circuits and also provide over load protection from the configuration of your circuit. It has an operating temperature between -15 degrees Celsius and +70 degrees Celsius, which makes it suitable for use in nearly any location. The AGC3 is an explosion proof fuse, which means that it can handle hazardous conditions and be used in environments where flammable gases or vapors may be present. It will also not ignite combustible materials such as dust, paper, or similar products.
This fuse has a rating of 3 amps, meaning that it can handle up to 3 amp current without tripping. It's capable of protecting against overloads up to 3 times this amount, although this may shorten the lifespan of the fuse. The AGC3 is designed to trip at 120° C, which is about the same temperature as boiling water. This makes it a suitable option for use with air conditioning units.

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP

Ships within 5 days

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP

By Cooper Bussmann

₹4,483

The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP is a fast-acting, current limiting fuse that is used as a circuit protection device in low voltage AC mains circuits. It is a cartridge fuse with style O. The fuse is made of glass and metal. The major application of the fuse is in lighting applications, in both residential and commercial buildings.
The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP is a fast blow type fuse designed for use in applications operating under primary and secondary voltage up to 1000VAC at 50/60Hz. It is for use in fused DC circuits, ac circuits, and power factor correction circuits. It offers high current capacity of 10.0A, low peak time delay of 0.01sec., and peak time delay of 0.1sec.
The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP is a 10-amp, 125V UL listed fuse with a 500 mA interrupting rating. It has a time delay of 0.01 sec (10 Amps) and 0.1 sec (2 Amps), with a peak inverse voltage (PIV) of 80 kV and 20 kV at 100% rated current for 2 or 10 amp fuse, respectively. The time delay class for this fuse is Class J, meaning it has a time delay that falls between the time delays of Class A and Class B fuses.

Ships within 3 days

Cooper Bussmann DMM Fuse - DMM-B-44/100

By Cooper Bussmann

₹1,651

The Cooper Bussmann DMM-B-44/100 is a Class J fuse with a current rating of 44 amps and a voltage rating of 100 volts. The primary use for this fuse is for motor control circuit protection and power distribution in residential, commercial and industrial environments. It is not intended for arc fault protection.
Developed in tandem with all other Cooper Bussmann products, the DMM series was created to meet the rigorous demands of today's electrical distribution systems. With capacities ranging from 1A to 1000A, these Class J fuses are available in both 250VAC and 500VAC ratings.
Working in the power distribution industry, Cooper Bussmann understands that safety and quality are the top priorities. To provide the safety of their products, they use components manufactured to meet stringent performance requirements, and they are willing to back up those components with performance guarantees.
Integrated designs allow for ESD (electrostatic discharge), thermal, overcurrent, voltage overload and short circuit protection in a single package. With high-performance construction and packaging techniques, Cooper Bussmann's DMM fuse panels have established themselves as the market standard.
Within the electrical industry, fuses are rated from 1 to 63 A at 250 VAC. Cooper Bussmann offers a product line of DMM (Double-Match) fuses that provide higher interrupt ratings at lower currents than other fuse products. The DMM fuse series is available in current interruption ratings from 5 A to 100 A in increments of 5 A, and can be used in a wide range of applications including power distribution panels, switchboards, and control panels.

Cooper Bussmann 20A 600V Low Peak Time Delay Fuse - LP-CC-20

Ships within 5 days

Cooper Bussmann 20A 600V Low Peak Time Delay Fuse - LP-CC-20

By Cooper Bussmann

₹2,359

Nobody likes to think about a worst-case scenario, but in the world of electronics, the likelihood of something going wrong is always there. Thankfully, we have companies like Cooper Bussmann to help us be prepared. Cooper Bussmann offers a wide variety of fuses to help protect against extreme surges and spikes, helping prevent damage to our electronics and prevent fires at home and in the factory.
Accessories like these fuses are important to keep around when working on projects involving AC power, especially when those projects involve high voltages or currents. Along with protecting your equipment, they can even save lives—electrical fires are one of the leading causes of death in home fires, according to the National Fire Protection Association.
Fuses come in two main types: thermal and time delay. Thermal fuses work by melting as a result of high temperatures, interrupting electrical flow as soon as an overload occurs. Time delay fuses operate by burning out slowly over time in response to excess current flow. This fuse is a time delay fuse, meaning it will burn out over time instead of immediately cutting power in response to too much current flow. The idea behind a time delay fuse is that it gives you more time to shut off power before any damage is done.

Cooper Bussmann Small DIM Cartridge Fuse - BK/MDA-10-R

Ships within 5 days

Cooper Bussmann Small DIM Cartridge Fuse - BK/MDA-10-R

By Cooper Bussmann

₹789

If you require a fuse that is very small in size, Cooper Bussmann's Small DIM Cartridge Fuse (BK/MDA-10-R) with a molded and encapsulated glass cartridge is the best choice. This fuse has a current rating of 10 amps and voltage rating of 250 VAC. It comes in a 0.25 in diameter x 0.375 in length package, which is the smallest available from Cooper Bussmann. This fuse has an interrupt rating of 50 KA at 250 VAC, which is one of the highest interrupt ratings for a cartridge fuse.
The Cooper Bussmann Small DIM Cartridge Fuse - BK/MDA-10-R is a fuse that has been manufactured by Cooper Bussmann and is used in various applications. The fuse is rated at 10 amp, 250 volt, and has the ability to handle a current of up to 10,000 amps. This fuse has been designed with an interrupting rating of 1.1kA, which breaks down to 1,100 kiloamperes, 1,100 kA, or one million amps.
The Cooper Bussmann Small DIM Cartridge Fuse - BK/MDA-10-R is a replacement fuse for some Cooper Bussmann circuit breakers and disconnects. It is designed for use in applications such as small load panels, computer rooms, and other areas with sensitive electronic equipment that require fast interrupting of power. The fuse has a current rating of 10 amps, voltage rating of 250VAC, and breaking capacity of 300 amps.

Cooper Bussmann Class RK5 Dual Element Time Delay Fuse - FRN-R-2-1/2

Ships within 5 days

Cooper Bussmann Class RK5 Dual Element Time Delay Fuse - FRN-R-2-1/2

By Cooper Bussmann

₹624

The Cooper Bussmann Class RK5 Dual Element Time Delay Fuse FRN-R-2-1/2 is a type of fuse that features a dual element design. The fuse consists of two metal foil elements that are placed into the body of the fuse. One element will melt when the current exceeds one amp, and the other element will melt at two amps. The metal foil element gives this fuse a high interrupting rating, and it also has an anti-impact element to prevent damage to the fuse if there is a physical impact.
This Class RK5 Dual Element Time Delay Fuse is rated for 600 volts and 2 amps. It measures 11/32" in diameter by 5-3/16" in length. It is used in applications where a high interrupting rating is required, such as an overload protection device or in an application that requires fusing of both the line and neutral terminals. The two amp fuse can help protect against short circuits or overloads on 480 volt systems where there are no other fusing devices present that protect all phases.
As a leading manufacturer of electronic, electrical, and data connectivity products, Cooper Bussmann offers a wide range of products and accessories to meet the electrical and electronic needs of commercial and residential applications. Our product portfolio includes a variety of modular circuit protection devices, power distribution systems, surge arresters, fuses and fuse holders, high reliability connectors and cable assemblies, wire and cable management solutions, control relays, switches, terminal blocks, interconnect systems, battery management systems and monitoring equipment.

Cooper Bussmann 20 Amp Blade Fuse - ATM-20

Ships within 5 days

Cooper Bussmann 20 Amp Blade Fuse - ATM-20

By Cooper Bussmann

₹2,241

Cooper Bussmann is a well-known provider of general electrical components. One of their most popular products is the ATM20 20 Amp blade fuse. This fuse is designed for use in power distribution systems with a maximum voltage rating of 600VAC and a maximum frequency rating of 60Hz. The fuse can be used in many electrical fields, including industrial, commercial, and residential settings. These fuses are equipped with a current-limiting thermal mechanism that prevents short circuits and overheating during an overcurrent situation. These features make this fuse ideal for use in applications requiring more than 15A of current.
If you need to replace an old fuse, Cooper Bussmann's ATM-20 can fit the bill. This 20 amp fuse is made to replace the old-style fuses that your house might have, which are typically 25 amps. Whether you are replacing a fuse for a circuit or upgrading to a higher amperage rating, this is just what you need.
Fuses are used to protect circuits from unwanted current and prevent damage to the wire and electrical devices attached to it. The ATM-20 is a 20 amp fast-acting blade fuse that provides protection for power distribution systems, lighting fixtures, and motor control circuits. This fuse has a temperature rating of 150 degrees Celsius.

Cooper Bussmann Type KTK Fast Acting Fuse - ‎BP/KTK-2

Ships within 5 days

Cooper Bussmann Type KTK Fast Acting Fuse - ‎BP/KTK-2

By Cooper Bussmann

₹2,713

The Cooper Bussmann Type KTK Fast Acting Fuse is a fast-acting fuse that can be used on Class CC and Class K circuit breakers. This fuse type is commonly used as a replacement for older and slower blow/ time fuses. It is designed to provide quick response to overcurrent situations, which helps protect your electrical system from major damage caused by these overloads.
This fuse has the same form factor as the current standard fast-acting fuses, allowing you to use it in most applications without needing to make any wiring changes. It's compatible with Cooper Bussmann's line of Class CC and Class K circuit breakers, which are also sold on our website at Electrical Supply Online.
The Cooper Bussmann Type KTK Fast Acting Fuse is designed with an operating voltage of 250VAC and a current rating of 3A. It is rated for 100kAIC at 600VAC, 25kAIC at 250VDC, and 2kAIC at 125VDC. Its holding current rating is 1mA at 25°C, or 0mA if the temperature exceeds 25°C at any time during operation.
Cooper Bussmann Type KTK Fast Acting Fuse is a non-resettable fuse. These fuses are specifically designed for high current, high voltage applications. They have a current rating of 20 to 1000 amperes, a voltage rating of 1000 to 35000 volts, and an interrupting rating of 20 to 1000 amps.

Cooper Bussmann 200 Amp 500VAC Tag Fuse - FWH-200B

Ships within 5 days

Cooper Bussmann 200 Amp 500VAC Tag Fuse - FWH-200B

By Cooper Bussmann

₹7,905

Cooper Bussmann offers a wide variety of fuses. One of the most interesting, because it is such an obscure fuse, is the Cooper Bussmann 200 Amp 500VAC Tag Fuse - FWH-200B. This particular type of fuse can be used for many high voltage applications. The fact that the fuse is a tag fuse makes it more convenient and safe for workers to use during installation. This tag fuse can be connected to a circuit breaker, making it unnecessary for workers to cut off power when doing electrical repairs.
This type of fuse has been used in applications such as communications systems, motors and welders, and other places where there is high voltage. It is also possible to use this fuse in various electrical panels. This particular type of fuse has proven itself to be an effective solution to many problems that could otherwise cause massive problems with circuits or the electrical systems themselves.
The time lag fuse provides protection against surges of up to 200 amps for 30 seconds. The fuse has internal circuitry that checks the integrity of the lead wires, ensuring that the fuse is not blown out by short circuits or ground faults. It has a maximum operating temperature of 150 degrees C and minimum operating temperature of -40 degrees C.

Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU

Ships within 5 days

Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU

By Cooper Bussmann

₹4,129

The Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU is an excellent solution for mounting fuse holders in the vehicle electrical systems where a compact and flexible design is needed. It can be used in a variety of applications, including fuses, relays, or sensors. The fuse holder has been designed to mount on standard 60 mm x 38 mm DIN rails. The holder's body has been made from high-impact nylon and comes in a black color to blend into the background of the vehicle. The holder also features a 90° bend so it can be mounted in tight spaces.
The Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU is a fuse holder for use with fuses up to 38 mm in length. It has a mounting pattern of 10 x 38. This unit is designed for use on DIN rail systems. This fuse holder comes with a mounting nut and washer, as well as a slide-on cover plate that allows for easy installation. The device has two mounting slots, which are located on the back of the unit. It comes with a plastic housing and brass contacts. It has an IP rating of 65 and an operating temperature range of 50 degrees Celsius to 100 degrees Celsius. This product is CE approved and RoHS compliant.

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-6SP

Ships within 5 days

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-6SP

By Cooper Bussmann

₹3,539

The Cooper Bussmann Class J Low Peak Time Delay Fuse is a fuse with a difference. It has the ability to cut off current to a circuit when it has been subjected to a high-energy surge of up to 10 times its current rating, which in some instances can help prevent damage to the circuit that would have otherwise resulted from the energy surge. This is possible because of the fuse's peak time delay capability, which causes it to open after a predetermined amount of time even if the energy surge is still present. This means that for circuits that may be susceptible to damage from high-energy surges, but are too small for a standard fuse, this type can provide protection against damage.
The product features Class J characteristics and operates at an interrupting voltage of 285VAC at 6A and an interrupting current of 6kA. It also features a peak time delay of 5µs as well as an operating temperature range of -20°C to 75°C. The nominal operating voltage is 200VAC and the maximum operating voltage is 500VAC, making it suitable for use in many different kinds of circuits.
The Cooper Bussmann Class J Low Peak Time Delay Fuse is used to protect motors and other inductive loads from over current or short circuit situations. This fuse has a time delay element that will limit the peak current in the event of a fault condition, which reduces the risk of damage to the motor or associated wiring.

Cooper Bussmann 6.25 Amp T Type Plug Fuse - BP-T-6-1-4

Ships within 5 days

Cooper Bussmann 6.25 Amp T Type Plug Fuse - BP-T-6-1-4

By Cooper Bussmann

₹2,831

The Cooper Bussmann 6.2 Amp T Type Plug Fuse - BP-T-6-1-4 is a class J fuse used in circuit protection and control, rated at 125 VAC, 6.25 Amp, 1 Pole, with a maximum fuse current of 6.0 Amp at 250 VAC.
The Cooper Bussmann 6.25 Amp T Type Plug Fuse - BP-T-6-1-4 is a fast acting fuse that protects the electrical system of your car from the effects of an overload or short circuit. The fuse has a blade terminal on one end and a 1/4 inch spade terminal on the other. It measures 1.25 inches long, making it small enough to fit most standard fuse holders that are designed for use with fuses of this size. Its amperage rating is 6.25, which makes it suitable for use with 12 volt systems that draw up to about 120 amps per hour, such as those found in cars, trucks and heavy machinery.
The Cooper Bussmann Class T-6.25 6A 250V plug fuse is an electrical fuse designed to be installed in the plug of a cord that is inserted into a standard outlet for household use. This fuse functions to protect the cord and the circuit it is plugged into from electrical overload or damage caused by short circuits. The Class T-6.25 fuse can handle 6.25 Amps at 250 Volts, and includes a built-in shutter mechanism so it can be easily replaced without damaging the surrounding cord or other outlets.

Cooper Bussmann Safeloc Fuse Holder - 32NNSF (Pack of 10)

Ships within 5 days

Cooper Bussmann Safeloc Fuse Holder - 32NNSF (Pack of 10)

By Cooper Bussmann

Pack of 10 piece

₹2,713

The Cooper Bussmann Safeloc Fuse Holder - 32NNSF is a fast acting fuse holder which will allow the user to quickly disconnect their circuits from all voltage sources. The product requires no special tools for installation and can be easily mounted onto any standard DIN rail. The fuse holder is made from high quality polymers which provide excellent resistance to corrosion and impact.
The main benefit of the Cooper Bussmann Safeloc Fuse Holder - 32NNSF is that it will help protect your equipment from damage caused by short circuits. In addition, it's designed to protect against over-currents, over-voltages, and overheating.
This piece is highly recommended for anyone who is looking to protect their electrical devices in a cost effective manner. It's a great choice for nearly any application including but not limited to: home appliances, lighting fixtures, computers, etc.
The Cooper Bussmann 32NNSF is a Safeloc fuse holder that is used to replace the older style fuse blocks. The fuse block is UL listed and CSA certified, meaning it meets all of the required standards for safe operation, including being able to withstand high impact forces, water and fungus. The device has a 2-foot power cord for connecting the device to a power source. It can be used in many applications, such as recreational vehicles and industrial equipment.

Page 1 of 1 results

Top Selling Cooper Bussmann Products Price List for December 2025

Product Name	Specifications	Expected Price	Dispatch Time	Discount
Cooper Bussmann 600VAC 300VDC Low Peak Time Delay Fuse - LP-CC-15	Class CC \| Dimension 38 x 10 x 10 mm	₹4,011	5 days	--
Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100	Ac Adapter Current 0.4 Amps \| Dimension 25 x 51 x 25 mm	₹1,415	2 days	--
Cooper Bussmann DMM Fuse - DMM-B-44/100	Ac Adapter Current 10 Kilo Amps \| Dimension 10 mm (Dia) x 35 mm (L)	₹1,651	3 days	--
Cooper Bussmann 11A 1000V DMM Fuse for Fluke Multimeter 15B - DMM 11AR	--	₹2,241	5 days	--
Cooper Bussmann 20A 600V Low Peak Time Delay Fuse - LP-CC-20	Ac Adapter Current 20 Amps \| Class CC	₹2,359	5 days	--
Cooper Bussmann 44mA 1000V Fuse Combo for Fluke Multimeter - DMM-11AR and DMM-44/100	Dimension 11.7 x 11.5 x 11.4 cm \| Material Alloy Steel & Glass	₹2,005	4 days	--