• Home /
• Electrical /
• Fuses, Circuit Breakers & Components /
• Electrical Fuse

Have a question? Call us now at +91 9650660070

Electrical Fuse

Showing 40 out of 5355 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 5 days

Cooper Bussmann Midget Fuse - FNQ-R-5

By Cooper Bussmann

₹2,477  

The Midget Fuse FNQ-R-5 from Cooper Bussmann is a miniature quick-acting fuse that has been around since the early 1900s. It is a thin wire of pure copper that is coated in an insulating layer. When the current passes across its surface, the copper wire heats up and melts, breaking the path of electricity. The heat generated is not enough to cause an overcurrent trip for other fuses in series with it. It is mounted in a D-shaped glass fuse holder with a black phenolic base, and has been known to be used in many applications such as medical equipment, toys, and appliances.
Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5, is a fuse designed to switch high currents and voltages. Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5 are used for power distribution in industrial applications and other similar applications. They are used for protection in a circuit connected load or devices against excess current and voltage. These fuses consist of a glass tube filled with fused silica gel and conductive particles. These fuses have a quick response time and high interrupting capacity. They are easy to handle and can be used interchangeably with other fuse types.
Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5 can withstand intermittent or continuous overloads as well as short circuit condition up to its rated current for the specified period of time without any damage or change in performance. Bussmann Midget Fuse 5 Amp 250VAC - FNQ-R-5 is resistant to vibration, impact, moisture, corrosion and thermal shock.

Add to Cart Buy Now

Ships within 2 days

Mersen 15A 1000V DC Fuse - HP10M15 (Pack of 5)

By Mersen

Pack of 5 piece

₹1,014  

The Mersen 15A 1000V DC Fuse is a fuse designed to protect electrical circuits from excessive current. When the circuit is functioning normally, the fuse allows electricity to flow freely; however, if the current exceeds 1,000 volts and 15 amps, the element in the fuse melts and interrupts the current. The Mersen 15A 1000V DC Fuse has a voltage of 1000 Volts and a current of 15 Amps. This fuse is a direct replacement for any fuse with the same specifications. This fuse is used for protection of the inverters and chargers of solar and wind power systems.
The Mersen HP10M15 DC fuse is suitable for use with all types of DC-powered appliances that conform to the IEC 60269-2-1 standard. It offers high performance, reliability and safety, while complying with environmental requirements.
This fuse features high mechanical strength, so it can be used in systems where a large amount of current flows through the circuit. It is fitted with a spring-loaded glass tube that can withstand up to 400V AC, making it suitable for use in both systems using a 12V or 24V wire as well as systems using a 48V wire.
This fuse has a resistant polyamide body that can withstand temperatures between -40°C and +105°C (-40°F to 220°F). Its plastic body is ideal for indoor use, while its stainless steel end caps are suitable for outdoor installations.

Add to Cart Buy Now

Ships within 4 days

Cooper Bussmann 44mA 1000V Fuse Combo for Fluke Multimeter - DMM-11AR and DMM-44/100

By Cooper Bussmann

₹2,005  

Cooper Bussmann 44mA 1000V Fuse Combo for Fluke Multimeter - DMM-11AR and DMM-44/100: An excellent addition to the Fluke multimeter line, this fuse combo pack from Cooper Bussmann is an affordable alternative to replacement fuses. It includes both types of fuse required by the Fluke multimeters: a 1000V (max) slow blow fuse and a 200mA fast blow fuse. The slow blow fuse is used in the case where there is a long-term fault condition, while the fast blow fuse is used in cases of short-term fault conditions. Its slim design makes it easy to store with your meter or keep on hand as you work.
If you're like me, when you need a replacement fuse for your multimeter, you head to Amazon and try to find one that's both reasonably priced and has good reviews. Unfortunately, most of the options available don't have many reviews at all, and those that do rarely have more than two stars. This particular product from Cooper Bussmann has four stars based on 12 customer reviews—much more reassuring than most other choices out there. It also comes in at about half the price of most options out there with comparable ratings.
There's always the risk of electrical shock when working with electricity, and it's important to have the right tools to protect yourself. Fluke has a wide range of multimeters that are appropriate for both professional and personal use, but if you're looking for a way to protect your meter with an inline fuse, Cooper Bussmann's fuse combo is an ideal choice. This 44 milliamp 1000 volt fuse safely protects your multimeter by acting as a circuit breaker should anything go wrong with your wiring.

Add to Cart Buy Now

Ships within 5 days

Mersen 30A 1000V DC Fuse - HP10M30 (Pack of 5)

By Mersen

Pack of 5 piece

₹1,014  

The HP10M30 is a fuse designed to protect electrical devices against dangerous currents. It has a current rating of 30A, and it can be used in DC circuits with voltages up to 1000V. Its quick-blow action helps prevent any damage to the device it protects, as well as any other connected devices. The HP10M30 comes from Mersen, which is an international electronics company that's been around for over 150 years and specializes in power distribution products. The Mersen 30A 1000V DC Fuse is used in applications where a maximum of 30 amperes at a voltage of 1000 volts DC (direct current) must be protected. This fuse is inserted into a fuseholder for mounting.
The Mersen 30A 1000V DC Fuse is designed to protect electrical circuits and equipment from overloads and short circuits. This fuse has a current rating of 30A and a voltage rating of 1000V DC. It is suitable for applications such as industrial, commercial, and residential. The HP10M30 fuse is a DC fuse for Mersen's power distribution boards. It is rated at 30 amps, 1000 volts, and has an interrupt rating of 1000 amps. It is designed to protect against short circuits and overloads in a power distribution board.
Each Mersen fuse is tested and inspected in-house to ensure the highest quality and reliability. The Mersen HP10M30 fuse is for replacement in 30A 600V general purpose applications. This fuse is also known by the manufacturer part number 30A 1000V DC Fuse - HP10M30

Add to Cart Buy Now

Ships within 5 days

Cooper Bussmann 11A 1000V DMM Fuse for Fluke Multimeter 15B - DMM 11AR

By Cooper Bussmann

₹2,241  

The Cooper Bussmann 11A 1000V DMM fuse for Fluke multimeter 15B is a fuse that is used on the line side of wiring and other connections in order to protect them from electrical overload. It is also used in any situation where there is a possibility of an overload, such as with power tools, motors, generators and other applications where there is a high amount of current being drawn. The fuse is rated at 11 amps and 1000 volts.
The first thing to consider is that you need to replace the fuse with an identical fuse. The reason is that you will be using the same kind of fuse holder as the original, and different types of fuses require different types of holders. For example, if you use a standard-size fuse in a miniature fuse holder, it will not fit; likewise, if you try to use a miniature fuse in a standard holder, it will not fit. So make sure that you get the same type of fuse as before.
Before replacing the fuse, you must remove the old one. To do this, simply pull it out with your fingers. There are two ways you can tell whether or not it has been removed: 1) there should be no resistance when pulling it out, and 2) there should be a small metal disc showing through where the hole was in the plastic case. If there is any resistance or no disc showing through, then you must pull harder until you either remove it or break it off inside the fuse holder.
To install a new one, push it into place until it "clicks." You'll know this has happened when you hear or feel something click into place inside the holder itself.

Add to Cart Buy Now

Ships within 2 days

Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100

By Cooper Bussmann

₹1,415  

The Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100 is a fuse used to protect the circuit board of the Fluke digital multimeter from any short circuits that could cause damage to the multimeter. This fuse is designed to be used with the Fluke digital multimeter, providing safety and protection for the circuit board and its components.
Fuses are very important in high-voltage electrical systems, as they provide a vital component that can help prevent major damage to critical components. When short circuits occur, fuses become very hot and melt, which disconnects the circuit and prevents further damage to components. This helps ensure that electricity cannot flow through a circuit and continue causing damage, which can lead to serious problems such as fire or explosions.
For use as a replacement fuse with the Fluke digital multimeter, this fuse is specifically made for the Fluke DMM-44/100 series of meters. The fuse is packaged individually in a plastic bag without any additional packaging materials or instructions.
The Cooper Bussmann 0.4A 1000V DMM Fuse for Fluke Digital Multimeter - DMM-44/100 is a precision engineered component to ensure the safety of your device. This fuse has a current rating of 0.4A and an interrupt rating of 1000V. This component is double-sealed in a vacuum packed glass tube to ensure that the product you receive will be free of defects.

Add to Cart Buy Now

Ships within 5 days

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP

By Cooper Bussmann

₹3,539  

The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP is designed to provide protection for electrical and electronic equipment in the event of an overload or short circuit. The fuse is rated at 15 Amp and 125 VAC, with a time delay of less than 5 ms. The Class J requires a current surge of greater than 3 x In to trip, which makes it ideal for applications that use inductive or capacitive loads.
These Fuses are designed for use in low voltage circuits including: household appliances, power tools, lighting fixtures and home theaters. The Class J fuse is a time delay fuse with a peak current rating of 12 amps and a time delay of 1.5 seconds at 120V AC and 60Hz.
The LPJ-12SP is a Class J Low Peak Time Delay Fuse, with a maximum operating voltage of 600V and amperage rating of 12A. It is rated at a maximum peak inverse voltage of 1200V and has a delay rating of 0.025ms. The fuse's amperage rating is within the range of Class J fuses, which makes it ideal for use with power distribution systems that operate below 600V.
The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-12SP is a fast-acting fuse that can be used in your residential, commercial and industrial circuits. These fuses are designed to protect electrical line and equipment from high voltage surges, and they are rated at 12kV. The Class J fuse is easy to install. It has a silver finish, and it has a time delay of .001 second.

Add to Cart Buy Now

Ships within 3 days

Bussmann Digital Multimeter Fuse Combo - DMM-11A and DMM-44/100

By Bussmann

Combo of 2 piece

₹2,123  

The Bussmann Digital Multimeter Fuse Combo - DMM-11A and DMM-44/100 is a combination that provides the user with a wide range of testing capabilities, including both AC and DC current measurements. The AC measurements are made possible by using the frequency response amplifier (FRA), which can be used for both RMS and peak detection. Additionally, the frequency response of this meter is 500 kHz, meaning that it has the ability to display signals from very low frequencies. The DC measurements are made possible by using two different measurement ranges: the first is a lower range at 0 to 600 VDC, while the second is an upper range at 0 to 600 VAG.
The Bussmann Digital Multimeter Fuse Combo is an excellent product for use in any facility. The combination of the DMM-11A and DMM-44/100 allows for greater versatility with testing your equipment. The DMM-11A performs standard measurements like those you would see from a typical multimeter. However, its unique feature is its ability to test the continuity of a fuse, making it much easier to replace and remove fuses if one were to blow for whatever reason. This is very helpful in situations where there are many fuses that need replacing and it's hard to get to them all at once. The DMM-44/100 reads the min and max values of a circuit, which can be very useful to have in order to determine whether the circuit is operating within a normal range. It also has a temperature sensor that can be used to monitor various things around your facility, allowing you better control over your energy usage.

Add to Cart Buy Now

Ships within 5 days

Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3

By Cooper Bussmann

₹1,651  

The Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3 is a glass tube fuse of different amps. The product is found in most electrical devices, such as household appliances, lightings, and motors among others. The fuse has been tested to meet the specification of the National Electrical Manufacturer Association. It is also made of materials that are flame retardant. This fuse is suitable for any circuits that use up to 13 amps.
The Cooper Bussmann 5 Counts 3 Amp Glass Tube Fuse - AGC3 is a 50 millimeter long, glass tube fuse for use with AC or DC fuses up to 600 volts. This fuse features a high quality design that is ideal for any application that requires a high level of safety and reliability. The AGC3 will prevent fires caused by electrical overloads or short circuits and also provide over load protection from the configuration of your circuit. It has an operating temperature between -15 degrees Celsius and +70 degrees Celsius, which makes it suitable for use in nearly any location. The AGC3 is an explosion proof fuse, which means that it can handle hazardous conditions and be used in environments where flammable gases or vapors may be present. It will also not ignite combustible materials such as dust, paper, or similar products.
This fuse has a rating of 3 amps, meaning that it can handle up to 3 amp current without tripping. It's capable of protecting against overloads up to 3 times this amount, although this may shorten the lifespan of the fuse. The AGC3 is designed to trip at 120° C, which is about the same temperature as boiling water. This makes it a suitable option for use with air conditioning units.

Add to Cart Buy Now

Ships within 5 days

Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP

By Cooper Bussmann

₹4,483  

The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP is a fast-acting, current limiting fuse that is used as a circuit protection device in low voltage AC mains circuits. It is a cartridge fuse with style O. The fuse is made of glass and metal. The major application of the fuse is in lighting applications, in both residential and commercial buildings.
The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP is a fast blow type fuse designed for use in applications operating under primary and secondary voltage up to 1000VAC at 50/60Hz. It is for use in fused DC circuits, ac circuits, and power factor correction circuits. It offers high current capacity of 10.0A, low peak time delay of 0.01sec., and peak time delay of 0.1sec.
The Cooper Bussmann Class J Low Peak Time Delay Fuse - LPJ-10SP is a 10-amp, 125V UL listed fuse with a 500 mA interrupting rating. It has a time delay of 0.01 sec (10 Amps) and 0.1 sec (2 Amps), with a peak inverse voltage (PIV) of 80 kV and 20 kV at 100% rated current for 2 or 10 amp fuse, respectively. The time delay class for this fuse is Class J, meaning it has a time delay that falls between the time delays of Class A and Class B fuses.

Add to Cart Buy Now

Ships within 5 days

Cooper Bussmann 600VAC 300VDC Low Peak Time Delay Fuse - LP-CC-15

By Cooper Bussmann

₹4,011  

When you're choosing a fuse for your application, there are many considerations that must be made. The size of the current draw, the amount of energy stored in the circuit and even the physical size of the fuse are all factors to review when making your selection. First and foremost, the fuse must be selected based on its current-carrying capacity. This value is expressed in amperes (A). A general rule of thumb is to select a fuse with a current-handling capacity that is 20% greater than the maximum fuse current rating. As an example, if you are designing a circuit that will carry a peak current rating of 5 amperes, then you need to select a fuse that can carry at least 6 amperes.
Cooper Bussmann's 600VAC 300VDC Low Peak Time Delay fuses are designed to protect against current surges and overloading at the source point. A surge of higher than normal voltage in a power supply may cause an arc, which could damage the fuse if not contained. This can lead to premature failure of the fuse, which will no longer protect the device. The Low Peak Time Delay feature is designed to prevent this by containing the arc within the fuse until it burns out. This reduces total energy required to blow the fuse and increases its service life.
The Cooper Bussmann Low Peak time Delay Fuse is rated 600 Volts AC and 300 Volts DC. It has a current rating of 20 Amps and a peak current rating of 50 Amps. The time delay temperature rise is 158 degrees. The glass case fuse is made of Boro Silicate Glass, the wire are made of Copper Alloy and the interlink is made of Polyester/Polyamide. The type of fuse is Medium Voltage/Medium Current.

Add to Cart Buy Now

Ships within 24 hrs

NISI Three Phase Ceramic Kit Kat Fuse with Copper Component

By NISI

₹101 - ₹2,831

The NISI Three Phase Ceramic Kit Kat Fuse with Copper Components is a reliable and essential component in electrical systems, designed to protect circuits from overloads and short circuits. Constructed with durable ceramic material and copper components, it ensures efficient and safe operation in three-phase systems. The ceramic body provides excellent thermal and mechanical protection, while the copper components offer low resistance and high conductivity for effective current flow. Suitable for various applications in industrial, commercial, and residential settings, this fuse is designed for durability and reliability. Crafted with high-quality materials and precision engineering, it provides peace of mind to users by safeguarding electrical systems against electrical faults. The NISI Three Phase Ceramic Kit Kat Fuse with Copper Components is a dependable choice for ensuring electrical safety and functionality in three-phase power distribution systems.

Type of Product : Kit Kat Fuse with Copper Component

Frequency : 50 Hz

Color : Ivory

Material : Ceramic

Voltage : 415V

Phase : Three Phase

Explore other Variants (9)

Ships within 24 hrs

Siemens Fuse Puller Series 3NX10__

By Siemens

₹943 - ₹3,421

Siemens Fuse Puller Series 3NX10__ fuse puller is an essential tool for safely and efficiently removing and installing fuses in electrical systems. Designed with user safety and convenience in mind, it typically features insulated handles to protect against electrical shock and a strong grip to securely hold various sizes of fuses. The tool's construction usually involves high-quality, non-conductive materials such as plastic or rubber, ensuring that it provides maximum protection against electrical currents. Fuse pullers come in different sizes and styles to accommodate a wide range of fuse types, from small automotive fuses to larger industrial ones. The ergonomic design of a fuse puller allows for easy maneuverability and precise handling, making it a valuable addition to the toolkit of electricians, mechanics, and DIY enthusiasts alike. Its compact size and lightweight nature make it portable and easy to store, while its durable construction ensures long-lasting performance. Using a fuse puller minimizes the risk of damage to the fuse or the fuse holder, ensuring that electrical systems remain intact and functional. Whether you're working on automotive repairs, household wiring, or industrial maintenance, a fuse puller is a must-have tool for ensuring safety and efficiency when dealing with fuses.

Type of Product : Fuse Puller

Explore other Variants (2)

Ships within 3 days

Eaton HRC High Speed Fuses BS88 ET

By EATON

₹494 - ₹553

Eaton HRC High Speed Fuses BS88 ET is a high-quality electrical protection device designed to safeguard circuits from overcurrent, short circuits, and electrical faults. Engineered for safety and reliability, Eaton fuses ensure the smooth operation of electrical systems in residential, commercial, and industrial applications. Eaton offers a wide range of fuses, including fast-acting, time-delay, and high-speed fuses, catering to different voltage and current requirements. These fuses provide quick and efficient fault interruption, preventing damage to electrical components and minimizing downtime. Constructed with durable materials, Eaton fuses offer high breaking capacity, ensuring they can handle sudden power surges and protect sensitive equipment. They comply with international safety standards, making them a trusted choice for electrical distribution panels, motor protection, and power supply systems. Easy to install and replace, Eaton fuses provide cost-effective protection while ensuring uninterrupted power supply. Whether for household appliances, industrial machinery, or power grids, Eaton fuses deliver exceptional performance and long-term reliability, making them an essential component of any electrical safety system.

Type of Product : HRC High Speed Fuses BS88 Type

Breaking Capacity : 200kA

Rated Voltage (V) : 240

Explore other Variants (9)

Ships within 3 days

Siemens Cylindrical Fuses Series 3NW61__1

By Siemens

₹683 - ₹825

You save ₹444!

35.31% OFF

Siemens Cylindrical Fuses Series 3NW61__1 cylindrical fuse is a critical component in electrical systems, designed to provide protection against overcurrent and short circuits. Its cylindrical shape, typically made from durable materials such as ceramic, glass, or plastic, houses a metal wire or strip that melts when exposed to excessive current. This melting action interrupts the electrical circuit, thereby preventing potential damage to electrical components and reducing the risk of fire hazards. Cylindrical fuses come in various sizes and current ratings, making them suitable for a wide range of applications, from household electronics to industrial machinery. They are easy to install and replace, featuring end caps that fit securely into fuse holders or fuse blocks. The transparent body of some fuses allows for quick visual inspection to determine if the fuse has blown, facilitating maintenance and troubleshooting. These fuses are essential for ensuring the safe operation of electrical circuits, providing a reliable and cost-effective means of protection. Their compact design allows for integration into even the most space-constrained environments. Whether used in automotive systems, consumer electronics, or heavy-duty industrial equipment, cylindrical fuses play a vital role in safeguarding electrical systems and maintaining the longevity and efficiency of the devices they protect.

Type of Product : Cylindrical Fuse

Explore other Variants (11)

Ships within 3 days

Siemens Low Voltage HRC Fuse(DIN) Series 3NA71__RC

By Siemens

₹1,014 - ₹1,533

Siemens Low Voltage HRC Fuse(DIN) Series 3NA71__RC Low Voltage HRC (High Rupturing Capacity) Fuse (DIN standard) is a critical component in electrical systems, providing reliable protection against overcurrents and short circuits. Designed for low voltage applications, these fuses are widely used in industrial, commercial, and residential settings to safeguard electrical circuits and equipment. The HRC fuse features a robust construction with high-quality materials, ensuring durability and long service life. Conforming to the DIN (Deutsches Institut für Normung) standards, these fuses guarantee compatibility and interchangeability within standardized electrical systems. They are designed to handle high fault currents without blowing, thus preventing damage to electrical installations and minimizing downtime. The HRC fuse's enclosed design ensures safe operation by containing arc energy and preventing the expulsion of hot gases or materials, thereby enhancing safety. These fuses are characterized by their precise current rating, ensuring accurate and reliable operation. When the current exceeds the designated limit, the fuse element melts, interrupting the circuit and preventing potential hazards. The clear indicator on the fuse body provides a visual signal when the fuse has blown, facilitating quick and easy identification and replacement. Overall, Low Voltage HRC Fuses (DIN standard) are essential for maintaining the integrity and safety of electrical systems, offering dependable protection, high breaking capacity, and compliance with international standards.

Type of Product : Low Voltage HRC Fuse(DIN)

Explore other Variants (12)

Ships within 5 days

Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU

By Cooper Bussmann

₹4,129  

The Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU is an excellent solution for mounting fuse holders in the vehicle electrical systems where a compact and flexible design is needed. It can be used in a variety of applications, including fuses, relays, or sensors. The fuse holder has been designed to mount on standard 60 mm x 38 mm DIN rails. The holder's body has been made from high-impact nylon and comes in a black color to blend into the background of the vehicle. The holder also features a 90° bend so it can be mounted in tight spaces.
The Cooper Bussmann 10x38 mm Din Rail Mount Fuse Holder - CHM1DU is a fuse holder for use with fuses up to 38 mm in length. It has a mounting pattern of 10 x 38. This unit is designed for use on DIN rail systems. This fuse holder comes with a mounting nut and washer, as well as a slide-on cover plate that allows for easy installation. The device has two mounting slots, which are located on the back of the unit. It comes with a plastic housing and brass contacts. It has an IP rating of 65 and an operating temperature range of 50 degrees Celsius to 100 degrees Celsius. This product is CE approved and RoHS compliant.

Add to Cart Buy Now

Ships within 3 days

Siemens Low Voltage HRC Fuse(DIN) Series 3NA78__RC

By Siemens

₹483 - ₹766

Siemens Low Voltage HRC Fuse(DIN) Series 3NA78__RC Low Voltage HRC (High Rupturing Capacity) Fuse (DIN standard) is a critical component in electrical systems, providing reliable protection against overcurrents and short circuits. Designed for low voltage applications, these fuses are widely used in industrial, commercial, and residential settings to safeguard electrical circuits and equipment. The HRC fuse features a robust construction with high-quality materials, ensuring durability and long service life. Conforming to the DIN (Deutsches Institut für Normung) standards, these fuses guarantee compatibility and interchangeability within standardized electrical systems. They are designed to handle high fault currents without blowing, thus preventing damage to electrical installations and minimizing downtime. The HRC fuse's enclosed design ensures safe operation by containing arc energy and preventing the expulsion of hot gases or materials, thereby enhancing safety. These fuses are characterized by their precise current rating, ensuring accurate and reliable operation. When the current exceeds the designated limit, the fuse element melts, interrupting the circuit and preventing potential hazards. The clear indicator on the fuse body provides a visual signal when the fuse has blown, facilitating quick and easy identification and replacement. Overall, Low Voltage HRC Fuses (DIN standard) are essential for maintaining the integrity and safety of electrical systems, offering dependable protection, high breaking capacity, and compliance with international standards.

Type of Product : Low Voltage HRC Fuse(DIN)

Explore other Variants (20)

Ships within 3 days

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTS__

By Siemens

₹176 - ₹789

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTS__ Low Voltage HRC (High Rupturing Capacity) Fuse (BS standard) is a critical safety component used in electrical systems to protect circuits from overcurrent and short circuits. Designed according to British Standards (BS), these fuses offer reliable and consistent performance in various applications, including industrial, commercial, and residential settings. The HRC fuse is constructed with a robust ceramic body and high-purity silica sand filling, which absorbs the energy generated during a fault condition, preventing arc formation and ensuring safe operation. The fuse element is made from pure silver or copper, providing excellent conductivity and precise breaking capacity. One of the key features of the Low Voltage HRC Fuse is its high rupturing capacity, which allows it to interrupt large fault currents without causing damage to the electrical system. This makes it particularly suitable for environments with high electrical demand and potential for significant fault conditions. Additionally, these fuses are designed for easy installation and replacement, with standardized dimensions and mounting options that ensure compatibility with a wide range of fuse holders and disconnect switches. The clear labeling and color-coding on the fuse body facilitate quick identification and selection of the appropriate fuse rating for specific applications. Overall, the Low Voltage HRC Fuse (BS) provides a reliable and efficient solution for protecting electrical circuits, ensuring the safety and longevity of electrical installations.

Rated Voltage : 415 V

Type of Product : Low Voltage HRC Fuse(BS)

Explore other Variants (15)

Ships within 3 days

Siemens Switch Disconnector Fuse Series 3KL8__5UA00

By Siemens

₹16,519 - ₹42,479

Siemens Switch Disconnector Fuse Series 3KL8__5UA00 Switch Disconnector Fuse is a critical component in electrical circuits, designed to provide both switching and protection functions in a single device. It integrates a disconnecting switch with a fuse, ensuring that circuits can be safely opened and closed while simultaneously protecting them from overcurrent and short-circuit conditions. This dual-functionality enhances safety and reliability in electrical installations. Constructed with high-quality, durable materials, a Switch Disconnector Fuse can withstand harsh environments and heavy usage. Its design ensures easy installation and maintenance, with clear indicators for operational status. The switch allows for manual isolation of electrical circuits, enabling safe maintenance and operation, while the fuse element provides automatic disconnection in the event of an overload or fault, preventing damage to equipment and reducing the risk of fire. These devices are commonly used in industrial, commercial, and residential settings, offering a

Type of Product : Switch Disconnector Fuse

Pole Type : 3PN

Explore other Variants (5)

Ships within 3 days

Siemens Blade Tag Low Voltage HRC Fuse(BS) Series 3NWNS__

By Siemens

₹152 - ₹188

Siemens Blade Tag Low Voltage HRC Fuse(BS) Series 3NWNS__ Low Voltage HRC (High Rupturing Capacity) Fuse (BS standard) is a critical safety component used in electrical systems to protect circuits from overcurrent and short circuits. Designed according to British Standards (BS), these fuses offer reliable and consistent performance in various applications, including industrial, commercial, and residential settings. The HRC fuse is constructed with a robust ceramic body and high-purity silica sand filling, which absorbs the energy generated during a fault condition, preventing arc formation and ensuring safe operation. The fuse element is made from pure silver or copper, providing excellent conductivity and precise breaking capacity. One of the key features of the Low Voltage HRC Fuse is its high rupturing capacity, which allows it to interrupt large fault currents without causing damage to the electrical system. This makes it particularly suitable for environments with high electrical demand and potential for significant fault conditions. Additionally, these fuses are designed for easy installation and replacement, with standardized dimensions and mounting options that ensure compatibility with a wide range of fuse holders and disconnect switches. The clear labeling and color-coding on the fuse body facilitate quick identification and selection of the appropriate fuse rating for specific applications. Overall, the Low Voltage HRC Fuse (BS) provides a reliable and efficient solution for protecting electrical circuits, ensuring the safety and longevity of electrical installations.

Rated Voltage : 415 V

Type of Product : Low Voltage HRC Fuse(BS)

Explore other Variants (8)

Ships within 5 days

Eaton Bussmann Fuse 170M1370 (690V)

By Eaton Bussmann

₹2,241  

Add to Cart Buy Now

Ships within 3 days

Eaton HRC High Speed Fuses BS88 MT

By EATON

₹1,037 - ₹2,005

Eaton HRC High Speed Fuses BS88 MT is a high-quality electrical protection device designed to safeguard circuits from overcurrent, short circuits, and electrical faults. Engineered for safety and reliability, Eaton fuses ensure the smooth operation of electrical systems in residential, commercial, and industrial applications. Eaton offers a wide range of fuses, including fast-acting, time-delay, and high-speed fuses, catering to different voltage and current requirements. These fuses provide quick and efficient fault interruption, preventing damage to electrical components and minimizing downtime. Constructed with durable materials, Eaton fuses offer high breaking capacity, ensuring they can handle sudden power surges and protect sensitive equipment. They comply with international safety standards, making them a trusted choice for electrical distribution panels, motor protection, and power supply systems. Easy to install and replace, Eaton fuses provide cost-effective protection while ensuring uninterrupted power supply. Whether for household appliances, industrial machinery, or power grids, Eaton fuses deliver exceptional performance and long-term reliability, making them an essential component of any electrical safety system.

Type of Product : HRC High Speed Fuses BS88 Type

Breaking Capacity : 200kA

Rated Voltage (V) : 690

Explore other Variants (7)

Ships within 3 days

Cooper Bussmann DMM Fuse - DMM-B-44/100

By Cooper Bussmann

₹1,651  

The Cooper Bussmann DMM-B-44/100 is a Class J fuse with a current rating of 44 amps and a voltage rating of 100 volts. The primary use for this fuse is for motor control circuit protection and power distribution in residential, commercial and industrial environments. It is not intended for arc fault protection.
Developed in tandem with all other Cooper Bussmann products, the DMM series was created to meet the rigorous demands of today's electrical distribution systems. With capacities ranging from 1A to 1000A, these Class J fuses are available in both 250VAC and 500VAC ratings.
Working in the power distribution industry, Cooper Bussmann understands that safety and quality are the top priorities. To provide the safety of their products, they use components manufactured to meet stringent performance requirements, and they are willing to back up those components with performance guarantees.
Integrated designs allow for ESD (electrostatic discharge), thermal, overcurrent, voltage overload and short circuit protection in a single package. With high-performance construction and packaging techniques, Cooper Bussmann's DMM fuse panels have established themselves as the market standard.
Within the electrical industry, fuses are rated from 1 to 63 A at 250 VAC. Cooper Bussmann offers a product line of DMM (Double-Match) fuses that provide higher interrupt ratings at lower currents than other fuse products. The DMM fuse series is available in current interruption ratings from 5 A to 100 A in increments of 5 A, and can be used in a wide range of applications including power distribution panels, switchboards, and control panels.

Add to Cart Buy Now

Ships within 5 days

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTIA__

By Siemens

₹199 - ₹235

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTIA__ Low Voltage HRC (High Rupturing Capacity) Fuse (BS standard) is a critical safety component used in electrical systems to protect circuits from overcurrent and short circuits. Designed according to British Standards (BS), these fuses offer reliable and consistent performance in various applications, including industrial, commercial, and residential settings. The HRC fuse is constructed with a robust ceramic body and high-purity silica sand filling, which absorbs the energy generated during a fault condition, preventing arc formation and ensuring safe operation. The fuse element is made from pure silver or copper, providing excellent conductivity and precise breaking capacity. One of the key features of the Low Voltage HRC Fuse is its high rupturing capacity, which allows it to interrupt large fault currents without causing damage to the electrical system. This makes it particularly suitable for environments with high electrical demand and potential for significant fault conditions. Additionally, these fuses are designed for easy installation and replacement, with standardized dimensions and mounting options that ensure compatibility with a wide range of fuse holders and disconnect switches. The clear labeling and color-coding on the fuse body facilitate quick identification and selection of the appropriate fuse rating for specific applications. Overall, the Low Voltage HRC Fuse (BS) provides a reliable and efficient solution for protecting electrical circuits, ensuring the safety and longevity of electrical installations.

Rated Voltage : 415 V

Type of Product : Low Voltage HRC Fuse(BS)

Explore other Variants (8)

Ships within 5 days

Eaton Bussmann Fuse 170M1372 (690 VAC)

By Eaton Bussmann

₹2,241  

Add to Cart Buy Now

Ships within 5 days

Eaton Bussmann Fuse 170M1371 (690 VAC)

By Eaton Bussmann

₹2,359  

Add to Cart Buy Now

Ships within 3 days

Peco HBC Fuse Links (Bolted Type) Offset A1 (PCNIT) IS/IEC Size

By Peco

₹100 - ₹100

You save ₹6!

5.84% OFF

Peco HBC Fuse Links (Bolted Type) Offset A1 (PCNIT) IS/IEC Size are engineered to deliver reliable protection against overloads and short-circuit faults in low-voltage electrical systems. Manufactured in compliance with IS/IEC standards, these fuse links ensure precise fault interruption and safeguard connected equipment effectively. The bolted type offset design provides secure mounting, low contact resistance, and stable electrical performance, making them suitable for demanding industrial and commercial applications. Ideal for use in switchgear panels, distribution boards, and control panels, Peco HBC Fuse Links (Bolted Type) Offset A1 (PCNIT) IS/IEC Size offer high breaking capacity and excellent thermal stability. The standardized A1 size ensures compatibility with designated fuse bases, allowing quick installation and easy replacement. Built for durability and consistent performance, these fuse links help reduce downtime, enhance system reliability, and maintain safe and uninterrupted operation in critical electrical installations.

Type of Product : HBC Fuse Links (Bolted Type)

Type : Offset

Voltage : 415 V

Conform to : IS/IEC 60269-1 & 2

IS/IEC Size : A1 (PCNIT)

Explore other Variants (10)

Ships within 3 days

Siemens Fuse Holder Series 3NW___NNSF

By Siemens

₹317 - ₹388

Siemens Fuse Holder Series 3NW___NNSF fuse holder is an essential electrical component designed to securely house and protect fuses, ensuring safe and reliable operation of electrical circuits. Constructed from durable materials, fuse holders are built to withstand various environmental conditions and mechanical stresses. They come in a variety of types, including panel-mounted, in-line, and PCB-mounted versions, catering to different application requirements. Panel-mounted fuse holders are typically used in electrical panels and equipment, providing easy access for fuse replacement. In-line fuse holders are ideal for automotive and other wiring applications where space is limited, allowing for quick and convenient integration into existing circuits. PCB-mounted fuse holders are used in electronic devices and circuit boards, ensuring a compact and efficient design. The fuse holder's design facilitates easy insertion and removal of fuses, reducing the risk of damage during maintenance. Its secure locking mechanism ensures that the fuse remains in place, providing consistent protection against overcurrent conditions. Additionally, many fuse holders are equipped with transparent covers or indicators that allow for visual inspection of the fuse status, enhancing safety and maintenance efficiency. Overall, a fuse holder is a critical component in electrical systems, providing essential protection and ensuring the safe operation of devices and circuits. Its versatility and robust design make it a valuable addition to any electrical or electronic setup.

Type of Product : Fuse Holder

Explore other Variants (2)

Ships within 3 days

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTCP__

By Siemens

₹730 - ₹1,651

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTCP__ Low Voltage HRC (High Rupturing Capacity) Fuse (BS standard) is a critical safety component used in electrical systems to protect circuits from overcurrent and short circuits. Designed according to British Standards (BS), these fuses offer reliable and consistent performance in various applications, including industrial, commercial, and residential settings. The HRC fuse is constructed with a robust ceramic body and high-purity silica sand filling, which absorbs the energy generated during a fault condition, preventing arc formation and ensuring safe operation. The fuse element is made from pure silver or copper, providing excellent conductivity and precise breaking capacity. One of the key features of the Low Voltage HRC Fuse is its high rupturing capacity, which allows it to interrupt large fault currents without causing damage to the electrical system. This makes it particularly suitable for environments with high electrical demand and potential for significant fault conditions. Additionally, these fuses are designed for easy installation and replacement, with standardized dimensions and mounting options that ensure compatibility with a wide range of fuse holders and disconnect switches. The clear labeling and color-coding on the fuse body facilitate quick identification and selection of the appropriate fuse rating for specific applications. Overall, the Low Voltage HRC Fuse (BS) provides a reliable and efficient solution for protecting electrical circuits, ensuring the safety and longevity of electrical installations.

Rated Voltage : 415 V

Type of Product : Low Voltage HRC Fuse(BS)

Explore other Variants (5)

Ships within 3 days

Siemens 3 Pole Switch Disconnector Fuse Series 3KL8__3UA00

By Siemens

₹20,059 - ₹60,179

Siemens 3 Pole Switch Disconnector Fuse Series 3KL8__3UA00 Switch Disconnector Fuse is a critical component in electrical circuits, designed to provide both switching and protection functions in a single device. It integrates a disconnecting switch with a fuse, ensuring that circuits can be safely opened and closed while simultaneously protecting them from overcurrent and short-circuit conditions. This dual-functionality enhances safety and reliability in electrical installations. Constructed with high-quality, durable materials, a Switch Disconnector Fuse can withstand harsh environments and heavy usage. Its design ensures easy installation and maintenance, with clear indicators for operational status. The switch allows for manual isolation of electrical circuits, enabling safe maintenance and operation, while the fuse element provides automatic disconnection in the event of an overload or fault, preventing damage to equipment and reducing the risk of fire. These devices are commonly used in industrial, commercial, and residential settings, offering a

Rated Voltage : 690 V

Type of Product : Switch Disconnector Fuse

Pole Type : 3PN

Explore other Variants (7)

Ships within 3 days

Siemens 3 PN Switch Disconnector Fuse Series 3KL81__5TA00

By Siemens

₹3,067 - ₹10,619

Siemens 3 PN Switch Disconnector Fuse Series 3KL81__5TA00 Switch Disconnector Fuse is a critical component in electrical circuits, designed to provide both switching and protection functions in a single device. It integrates a disconnecting switch with a fuse, ensuring that circuits can be safely opened and closed while simultaneously protecting them from overcurrent and short-circuit conditions. This dual-functionality enhances safety and reliability in electrical installations. Constructed with high-quality, durable materials, a Switch Disconnector Fuse can withstand harsh environments and heavy usage. Its design ensures easy installation and maintenance, with clear indicators for operational status. The switch allows for manual isolation of electrical circuits, enabling safe maintenance and operation, while the fuse element provides automatic disconnection in the event of an overload or fault, preventing damage to equipment and reducing the risk of fire. These devices are commonly used in industrial, commercial, and residential settings, offering a

Type of Product : Switch Disconnector Fuse

Pole Type : 3PN

Explore other Variants (7)

Ships within 3 days

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTIS__

By Siemens

₹176 - ₹294

Siemens Offset Tag Low Voltage HRC Fuse(BS) Series 3NWTIS__ Low Voltage HRC (High Rupturing Capacity) Fuse (BS standard) is a critical safety component used in electrical systems to protect circuits from overcurrent and short circuits. Designed according to British Standards (BS), these fuses offer reliable and consistent performance in various applications, including industrial, commercial, and residential settings. The HRC fuse is constructed with a robust ceramic body and high-purity silica sand filling, which absorbs the energy generated during a fault condition, preventing arc formation and ensuring safe operation. The fuse element is made from pure silver or copper, providing excellent conductivity and precise breaking capacity. One of the key features of the Low Voltage HRC Fuse is its high rupturing capacity, which allows it to interrupt large fault currents without causing damage to the electrical system. This makes it particularly suitable for environments with high electrical demand and potential for significant fault conditions. Additionally, these fuses are designed for easy installation and replacement, with standardized dimensions and mounting options that ensure compatibility with a wide range of fuse holders and disconnect switches. The clear labeling and color-coding on the fuse body facilitate quick identification and selection of the appropriate fuse rating for specific applications. Overall, the Low Voltage HRC Fuse (BS) provides a reliable and efficient solution for protecting electrical circuits, ensuring the safety and longevity of electrical installations.

Rated Voltage : 415 V

Type of Product : Low Voltage HRC Fuse(BS)

Explore other Variants (6)

Ships within 5 days

Mersen 30A 1000VDC Solar DC Fuse - HP10M30

By Mersen

₹341  

The Mersen 30A 1000VDC Solar DC Fuse - HP10M30 is often used by homeowners and electricians to connect the solar panel to an electrical circuit, and it's the right choice for a variety of situations. When the fuse is placed between the solar panel and the system's batteries or other power sources, it protects from solar array faults that could damage the batteries or other components. The fuse also provides protection from surges in current as well as shorts caused by metallic objects—it keeps the current flowing properly so that your solar array stays functional.
The fuse has a metal frame that's designed to ensure it stays in one place even during strong winds. It has a wide contact area that ensures maximum current flow to and from the panel, while its metal housing protects against corrosion, especially when it's used outdoors. The Mersen 30A 1000VDC Solar DC Fuse - HP10M30 is made with high-quality materials that give you years of reliable performance.
This type of fuse is used in PV inverters to protect the power output bus. The fuse is made up of a glass tube filled with an inert gas, and the ends are sealed with the use of silver solder. For applications where the temperature will exceed 80C (176F), a silver-plated copper tube is used. The amp rating of this fuse can be increased by filling the glass tube with nitrogen instead of air.

Add to Cart Buy Now

Ships within 3 days

ELCON HRC Fuse Links Special IS/IEC Size, 1000 Amp, 500 V AC, P 852 g2 1000

By ELCON

₹6,253   ₹6,419

You save ₹166!

2.59% OFF

ELCON HRC Fuse Links Special IS/IEC Size, 1000 Amp, 500 V AC, P 852 g2 1000 are high-performance protection devices designed for reliable safeguarding of electrical circuits in industrial and commercial power distribution systems. Rated for 500 V AC with a high breaking capacity of up to 80 kA, these DIN type fuse links provide effective protection against overloads and short circuits. Manufactured to comply with IS/IEC 60269-1 & 2 standards, they ensure consistent performance, safety, and compatibility with standard DIN fuse bases and switchgear assemblies. Engineered for durability and precise operation, ELCON HRC Fuse Links Special IS/IEC Size, 1000 Amp, 500 V AC, P 852 g2 1000 deliver dependable fault interruption while maintaining system integrity. The gG utilization category makes them suitable for general-purpose protection of cables, motors, and distribution lines. These fuse links are an ideal choice for professionals seeking standardized, high-breaking-capacity, and long-lasting circuit protection solutions for demanding electrical applications.

Add to Cart Buy Now

Ships within 3 days

ELCON HRC Fuse Links DIN 00 IS/IEC Size, 63 Amp, 500 V AC, S 852 b 063

By ELCON

₹447   ₹460

You save ₹13!

2.87% OFF

ELCON HRC Fuse Links DIN 00 IS/IEC Size, 63 Amp, 500 V AC, S 852 b 063 are high-performance protection devices designed for reliable safeguarding of electrical circuits in industrial and commercial power distribution systems. Rated for 500 V AC with a high breaking capacity of up to 80 kA, these DIN type fuse links provide effective protection against overloads and short circuits. Manufactured to comply with IS/IEC 60269-1 & 2 standards, they ensure consistent performance, safety, and compatibility with standard DIN fuse bases and switchgear assemblies. Engineered for durability and precise operation, ELCON HRC Fuse Links DIN 00 IS/IEC Size, 63 Amp, 500 V AC, S 852 b 063 deliver dependable fault interruption while maintaining system integrity. The gG utilization category makes them suitable for general-purpose protection of cables, motors, and distribution lines. These fuse links are an ideal choice for professionals seeking standardized, high-breaking-capacity, and long-lasting circuit protection solutions for demanding electrical applications.

Add to Cart Buy Now

Ships within 3 days

Peco HRC Fuse Base Porcelain

By Peco

₹424 - ₹7,197

You save ₹24!

5.44% OFF

Peco HRC Fuse Base Porcelain is engineered to provide safe and reliable support for HRC fuses in low-voltage electrical systems. Made from high-quality porcelain, this fuse base ensures excellent insulation, thermal stability, and durability under demanding electrical loads. Its robust construction reduces the risk of electrical faults and ensures secure mounting of HRC fuses, making it ideal for industrial, commercial, and residential applications. Designed for easy installation in switchgear panels, distribution boards, and control panels, Peco HRC Fuse Base Porcelain offers strong mechanical strength and long-lasting performance. Compatible with standard HRC fuses, it ensures safe and efficient circuit protection while minimizing maintenance requirements. With its durable porcelain build and dependable reliability, this fuse base helps safeguard electrical equipment, reduce downtime, and maintain overall system safety in critical electrical setups.

Type of Product : HRC Fuse Base

Type : Porcelain Base

Voltage : 415 V

Conform to : IS/IEC 60269-1 & 2

Explore other Variants (7)

Ships within 5 days

Anchor Deluxe Kit Kat Fuse 16 A 50 Hz

By Anchor

₹79 - ₹79

The Anchor Deluxe Kit Kat Fuse 16 A 50 Hz is an essential electrical safety device designed to protect circuits from overcurrent and short-circuiting, ensuring the safety and reliability of electrical systems in residential, commercial, and industrial environments. Engineered to handle a current rating of 16 Amps and operating at a frequency of 50 Hz, this fuse is ideal for safeguarding various electrical appliances and installations, preventing potential damage caused by electrical faults. Constructed with high-quality materials, the Anchor Deluxe Kit Kat Fuse ensures durability and long-lasting performance. Its robust design includes a ceramic body that provides excellent thermal resistance and superior insulating properties, which are critical for withstanding high temperatures generated during fault conditions. The fuse element inside is precisely calibrated to melt and break the circuit when the current exceeds the specified rating, thereby protecting the wiring and connected devices from the harmful effects of excessive current. The installation of the Anchor Deluxe Kit Kat Fuse is straightforward, featuring user-friendly terminals that allow for secure and easy connection to electrical circuits. Its compact size ensures it can be conveniently integrated into various electrical panels and distribution boards without occupying excessive space. Additionally, the fuse is designed for quick and easy replacement, minimizing downtime and maintenance efforts in case of a fault. Safety is a paramount concern with the Anchor Deluxe Kit Kat Fuse, and it complies with relevant industry standards and certifications, ensuring reliable protection and peace of mind for users. Its efficient operation not only protects valuable electrical equipment but also helps in maintaining the overall stability and safety of the electrical infrastructure.

Rated Voltage : 240 V

Rated Current (A) : 16 A

Type of Product : Deluxe Kit Kat Fuse

Rated Frequency : 50Hz

Explore other Variants (3)

Ships within 3 days

Siemens Low Voltage HRC Fuse(DIN) Series 3NA33__RC

By Siemens

₹2,595 - ₹3,539

Siemens Low Voltage HRC Fuse(DIN) Series 3NA33__RC Low Voltage HRC (High Rupturing Capacity) Fuse (DIN standard) is a critical component in electrical systems, providing reliable protection against overcurrents and short circuits. Designed for low voltage applications, these fuses are widely used in industrial, commercial, and residential settings to safeguard electrical circuits and equipment. The HRC fuse features a robust construction with high-quality materials, ensuring durability and long service life. Conforming to the DIN (Deutsches Institut für Normung) standards, these fuses guarantee compatibility and interchangeability within standardized electrical systems. They are designed to handle high fault currents without blowing, thus preventing damage to electrical installations and minimizing downtime. The HRC fuse's enclosed design ensures safe operation by containing arc energy and preventing the expulsion of hot gases or materials, thereby enhancing safety. These fuses are characterized by their precise current rating, ensuring accurate and reliable operation. When the current exceeds the designated limit, the fuse element melts, interrupting the circuit and preventing potential hazards. The clear indicator on the fuse body provides a visual signal when the fuse has blown, facilitating quick and easy identification and replacement. Overall, Low Voltage HRC Fuses (DIN standard) are essential for maintaining the integrity and safety of electrical systems, offering dependable protection, high breaking capacity, and compliance with international standards.

Type of Product : Low Voltage HRC Fuse(DIN)

Explore other Variants (8)

Ships within 3 days

Siemens Low Voltage HRC Fuse(DIN) Series 3NA72__RC

By Siemens

₹1,769 - ₹2,241

Siemens Low Voltage HRC Fuse(DIN) Series 3NA72__RC Low Voltage HRC (High Rupturing Capacity) Fuse (DIN standard) is a critical component in electrical systems, providing reliable protection against overcurrents and short circuits. Designed for low voltage applications, these fuses are widely used in industrial, commercial, and residential settings to safeguard electrical circuits and equipment. The HRC fuse features a robust construction with high-quality materials, ensuring durability and long service life. Conforming to the DIN (Deutsches Institut für Normung) standards, these fuses guarantee compatibility and interchangeability within standardized electrical systems. They are designed to handle high fault currents without blowing, thus preventing damage to electrical installations and minimizing downtime. The HRC fuse's enclosed design ensures safe operation by containing arc energy and preventing the expulsion of hot gases or materials, thereby enhancing safety. These fuses are characterized by their precise current rating, ensuring accurate and reliable operation. When the current exceeds the designated limit, the fuse element melts, interrupting the circuit and preventing potential hazards. The clear indicator on the fuse body provides a visual signal when the fuse has blown, facilitating quick and easy identification and replacement. Overall, Low Voltage HRC Fuses (DIN standard) are essential for maintaining the integrity and safety of electrical systems, offering dependable protection, high breaking capacity, and compliance with international standards.

Type of Product : Low Voltage HRC Fuse(DIN)

Explore other Variants (6)

Previous Next

Page 1 of 134 results