• Home /
• All Brands /
• Premium Transmission

Have a question? Call us now at +91 9650660070

Premium Products Online

Showing 40 out of 3939 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 4 days

Premium Transmission 50/1 Adaptable Standard Worm Gearbox For 4 Pole 0.112 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 30/1 Adaptable Double Output Worm Gearbox For 4 Pole 0.217 kW 112 Size Motor

By Premium Transmission

₹11,799   ₹31,152

You save ₹19,353!

62.12% OFF

The purpose of a gearbox Double output 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 20/1 Adaptable Standard Worm Gearbox For 4 Pole 3.71 kW 287 Size Motor

By Premium Transmission

₹23,599   ₹58,563

You save ₹34,964!

59.7% OFF

The purpose of a gearbox Standard 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 20/1 Adaptable Standard Worm Gearbox For 4 Pole 0.3 kW 112 Size Motor

By Premium Transmission

₹14,159   ₹26,821

You save ₹12,662!

47.21% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 70/1 Adaptable Standard Worm Gearbox For 4 Pole 0.35 kW 200 Size Motor

By Premium Transmission

₹17,699   ₹41,784

You save ₹24,085!

57.64% OFF

The purpose of a gearbox Standard 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 60/1 Adaptable Standard Worm Gearbox For 4 Pole 0.6 kW 237 Size Motor

By Premium Transmission

₹17,699   ₹46,669

You save ₹28,970!

62.08% OFF

The purpose of a gearbox Standard 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 30/1 Adaptable Standard Worm Gearbox For 4 Pole 0.217 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Solid Foot Shaft Mounted Worm Gearbox For 4 Pole 15.9 kW 500 Size Motor

By Premium Transmission

₹27,139   ₹3,46,424

You save ₹319,285!

92.17% OFF

The purpose of a gearbox Shaft Mounted 500 Sizeis to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 70/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 7.75 kW 700 Size Motor

By Premium Transmission

₹1,23,899   ₹3,12,995

You save ₹189,096!

60.42% OFF

The purpose of a gearbox U-standard 700 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 15/1 Adaptable Standard Worm Gearbox For 4 Pole 0.329 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Standard Worm Gearbox For 4 Pole 0.548 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 10/1 Adaptable Standard Worm Gearbox For 4 Pole 0.432 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 40/1 Adaptable Standard Worm Gearbox For 4 Pole 1.68 kW 287 Size Motor

By Premium Transmission

₹23,599   ₹58,563

You save ₹34,964!

59.7% OFF

The purpose of a gearbox Standard 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 30/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 11.8 kW 600 Size Motor

By Premium Transmission

₹89,679   ₹2,45,015

You save ₹155,336!

63.4% OFF

The purpose of a gearbox U-standard 600 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 40/1 Heavy Duty U-Standard Worm Gearbox For 4 Pole 70 Kw 1400 Size Motor

By Premium Transmission

₹6,71,299   ₹18,46,075

You save ₹1,174,776!

63.64% OFF

The purpose of a gearbox U-standard 1400 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 20/1 Adaptable Standard Worm Gearbox For 4 Pole 2.3 kW 237 Size Motor

By Premium Transmission

₹17,699   ₹46,669

You save ₹28,970!

62.08% OFF

The purpose of a gearbox Standard 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 20/1 Adaptable Standard Worm Gearbox For 4 Pole 0.655 kW 162 Size Motor

By Premium Transmission

₹14,159   ₹36,733

You save ₹22,574!

61.45% OFF

The purpose of a gearbox Standard 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 40/1 Adaptable Double Input Worm Gearbox For 4 Pole 0.164 kW 112 Size Motor

By Premium Transmission

₹12,979   ₹33,217

You save ₹20,238!

60.93% OFF

The purpose of a gearbox Double input 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 40/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 9.64 kW 600 Size Motor

By Premium Transmission

₹89,679   ₹2,45,015

You save ₹155,336!

63.4% OFF

The purpose of a gearbox U-standard 600 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 70/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 10.9 kW 800 Size Motor

By Premium Transmission

₹1,41,599   ₹3,72,054

You save ₹230,455!

61.94% OFF

The purpose of a gearbox U-standard 800 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double I/O Worm Gearbox For 4 Pole 1.052 kW 162 Size Motor

By Premium Transmission

₹18,879   ₹49,088

You save ₹30,209!

61.54% OFF

The purpose of a gearbox Double I/O 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 25/1 Adaptable Standard Worm Gearbox For 4 Pole 0.578 kW 162 Size Motor

By Premium Transmission

₹14,159   ₹36,733

You save ₹22,574!

61.45% OFF

The purpose of a gearbox Standard 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 20/1 Adaptable Double Input Worm Gearbox For 4 Pole 0.3 kW 112 Size Motor

By Premium Transmission

₹12,979   ₹33,217

You save ₹20,238!

60.93% OFF

The purpose of a gearbox Double input 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 40/1 Adaptable Double Reduction Worm Gearbox For 4 Pole 0.427 kW 162 Size Motor

By Premium Transmission

₹31,859   ₹80,311

You save ₹48,452!

60.33% OFF

The purpose of a gearbox Double reduction 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 40/1 Adaptable Standard Worm Gearbox For 4 Pole 0.427 kW 162 Size Motor

By Premium Transmission

₹14,159   ₹36,733

You save ₹22,574!

61.45% OFF

The purpose of a gearbox Standard 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 40/1 Adaptable Double Output Worm Gearbox For 4 Pole 0.164 kW 112 Size Motor

By Premium Transmission

₹11,799   ₹31,152

You save ₹19,353!

62.12% OFF

The purpose of a gearbox Double output 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 15/1 Heavy Duty Shaft Mounted Worm Gearbox For 6 Pole 114 kW 1400 Size Motor

By Premium Transmission

₹12,52,378   ₹34,44,042

You save ₹2,191,664!

63.64% OFF

The purpose of a gearbox Shaft Mounted 1400 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 40/1 Heavy Duty Double Reduction Worm Gearbox For 6 Pole 39 kW 1200 Size Motor

By Premium Transmission

₹6,41,816   ₹17,64,997

You save ₹1,123,181!

63.64% OFF

The purpose of a gearbox Double Reduction 1200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 15/1 V/O Series Unit With RHB Worm Gearbox For 4 Pole 55.5 kW 1000 Size Motor

By Premium Transmission

₹3,42,199   ₹9,33,427

You save ₹591,228!

63.34% OFF

Premium Transmission 15/1 V/O Series Unit With RHB Worm Gearbox For 4 Pole 55.5 kW 1000 Size Motor A heavy-duty worm gearbox is a mechanical device used to transmit power and torque between two shafts that are perpendicular to each other. It consists of a worm gear (a worm screw) and a worm wheel. The worm gear is a cylindrical screw-like gear, and the worm wheel is a toothed wheel that meshes with the worm gear High Torque Transmission: The worm gear and wheel design allow high torque transmission. This makes the gearbox suitable for applications requiring heavy-duty power transmission Proper Angle Configuration: The shafts connected by the worm gearbox is typically positioned at a right angle to each other. This makes the gearbox suitable for transmitting power between shafts in applications requiring a change in direction Self-Locking Feature: A worm gearbox has a self-locking feature, meaning that the worm gear can prevent the worm wheel from rotating when the gearbox is not in operation. This feature provides inherent stability and safety in applications where it is essential to avoid back-driving Efficiency and Lubrication: Worm gearboxes typically have lower mechanical effectual others due to the sliding contact between the worm gear and the worm wheel. Adequate lubrication is crucial to minimize friction and ensure smooth operation Applications: Heavy-duty worm gearboxes are commonly used in various industrial applications, including machinery, conveyors, lifting equipment, and heavy-duty automotive applications. They are instrumental when high torque, proper angle transmission, and speed reduction are required

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable With Motor Flange Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹23,599   ₹59,389

You save ₹35,790!

60.26% OFF

The purpose of a gearbox With motor flange 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 7.5/1 Adaptable Double Output Worm Gearbox For 4 Pole 2.92 kW 237 Size Motor

By Premium Transmission

₹22,419   ₹57,737

You save ₹35,318!

61.17% OFF

The purpose of a gearbox Double output 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 25/1 Adaptable Standard Worm Gearbox For 4 Pole 0.266 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 20/1 Adaptable Hollow O/p Shaft Worm Gearbox For 4 Pole 2.3 kW 237 Size Motor

By Premium Transmission

₹24,779   ₹63,614

You save ₹38,835!

61.05% OFF

The purpose of a gearbox Hollow O/p shaft 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 25/1 Adaptable Double Output Worm Gearbox For 4 Pole 3.91 kW 337 Size Motor

By Premium Transmission

₹31,859   ₹84,547

You save ₹52,688!

62.32% OFF

The purpose of a gearbox Double output 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 50/1 Adaptable Double Output Worm Gearbox For 4 Pole 0.53 kW 200 Size Motor

By Premium Transmission

₹21,239   ₹53,879

You save ₹32,640!

60.58% OFF

The purpose of a gearbox Double output 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 15/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 6.67 kW 400 Size Motor

By Premium Transmission

₹58,999   ₹1,59,111

You save ₹100,112!

62.92% OFF

The purpose of a gearbox U-standard 400 Sizeis to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 40/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 3.5 kW 400 Size Motor

By Premium Transmission

₹58,999   ₹1,59,111

You save ₹100,112!

62.92% OFF

The purpose of a gearbox U-standard 400 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 35/1 Solid Foot Double I/O Shaft Worm Gearbox For 4 Pole 10.3 kW 600 Size Motor

By Premium Transmission

₹1,07,379   ₹2,94,906

You save ₹187,527!

63.59% OFF

The purpose of a gearbox Double I/O shaft 600 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 30/1 Solid Foot U-Standard Worm Gearbox For 4 Pole 7.45 kW 500 Size Motor

By Premium Transmission

₹74,339   ₹2,04,341

You save ₹130,002!

63.62% OFF

The purpose of a gearbox U-standard 500 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 60/1 Solid Foot Double Reduction Worm Gearbox For 4 Pole 13.2 kW 800 Size Motor

By Premium Transmission

₹2,24,199   ₹5,89,198

You save ₹364,999!

61.95% OFF

The purpose of a gearbox Double Reduction 800 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Previous Next

Page 1 of 99 results