• Home /
• All Brands /
• Premium Transmission

Have a question? Call us now at +91 9650660070

Premium Products Online

Showing 40 out of 3939 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

Premium Transmission Gear Box 1:50 Ratio 200MM Size Type A200

By Premium Transmission

₹11,681  

A200, 50:1, Premium Transmission, worm gear box

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Hollow O/p Shaft Worm Gearbox For 4 Pole 4.05 kW 237 Size Motor

By Premium Transmission

₹24,779   ₹63,614

You save ₹38,835!

61.05% OFF

The purpose of a gearbox Hollow O/p shaft 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable With Motor Flange Worm Gearbox For 4 Pole 4.05 kW 237 Size Motor

By Premium Transmission

₹25,959   ₹67,579

You save ₹41,620!

61.59% OFF

The purpose of a gearbox With motor flange 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double I/O Worm Gearbox For 4 Pole 4.05 kW 237 Size Motor

By Premium Transmission

₹25,959   ₹65,419

You save ₹39,460!

60.32% OFF

The purpose of a gearbox Double I/O 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double Input Worm Gearbox For 4 Pole 4.05 kW 237 Size Motor

By Premium Transmission

₹24,779   ₹61,915

You save ₹37,136!

59.98% OFF

The purpose of a gearbox Double input 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double Output Worm Gearbox For 4 Pole 4.05 kW 237 Size Motor

By Premium Transmission

₹22,419   ₹57,737

You save ₹35,318!

61.17% OFF

The purpose of a gearbox Double output 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Standard Worm Gearbox For 4 Pole 4.05 kW 237 Size Motor

By Premium Transmission

₹17,699   ₹46,669

You save ₹28,970!

62.08% OFF

The purpose of a gearbox Standard 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double Reduction Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹34,219   ₹88,866

You save ₹54,647!

61.49% OFF

The purpose of a gearbox Double reduction 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Hollow O/p Shaft Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹21,239   ₹52,888

You save ₹31,649!

59.84% OFF

The purpose of a gearbox Hollow O/p shaft 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable With Motor Flange Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹23,599   ₹59,389

You save ₹35,790!

60.26% OFF

The purpose of a gearbox With motor flange 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double I/O Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹23,599   ₹59,012

You save ₹35,413!

60.01% OFF

The purpose of a gearbox Double I/O 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double Input Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹21,239   ₹54,433

You save ₹33,194!

60.98% OFF

The purpose of a gearbox Double input 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double Output Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹21,239   ₹53,879

You save ₹32,640!

60.58% OFF

The purpose of a gearbox Double output 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Standard Worm Gearbox For 4 Pole 2.72 kW 200 Size Motor

By Premium Transmission

₹17,699   ₹41,784

You save ₹24,085!

57.64% OFF

The purpose of a gearbox Standard 200 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double Reduction Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹31,859   ₹80,311

You save ₹48,452!

60.33% OFF

The purpose of a gearbox Double reduction 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Hollow O/p Shaft Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹17,699   ₹47,023

You save ₹29,324!

62.36% OFF

The purpose of a gearbox Hollow O/p shaft 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable With Motor Flange Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹20,059   ₹51,790

You save ₹31,731!

61.27% OFF

The purpose of a gearbox With motor flange 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 5/1 Adaptable Double I/O Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹18,879   ₹49,088

You save ₹30,209!

61.54% OFF

The purpose of a gearbox Double I/O 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Double Input Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹17,699   ₹45,572

You save ₹27,873!

61.16% OFF

The purpose of a gearbox Double input 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Double Output Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹16,519   ₹43,778

You save ₹27,259!

62.27% OFF

The purpose of a gearbox Double output 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Standard Worm Gearbox For 4 Pole 1.243 kW 162 Size Motor

By Premium Transmission

₹14,159   ₹36,733

You save ₹22,574!

61.45% OFF

The purpose of a gearbox Standard 162 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Double I/O Worm Gearbox For 4 Pole 0.548 kW 112 Size Motor

By Premium Transmission

₹14,159   ₹35,211

You save ₹21,052!

59.79% OFF

The purpose of a gearbox Double I/O 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Double Input Worm Gearbox For 4 Pole 0.548 kW 112 Size Motor

By Premium Transmission

₹12,979   ₹33,217

You save ₹20,238!

60.93% OFF

The purpose of a gearbox Double input 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Double Output Worm Gearbox For 4 Pole 0.548 kW 112 Size Motor

By Premium Transmission

₹11,799   ₹31,152

You save ₹19,353!

62.12% OFF

The purpose of a gearbox Double output 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 4 days

Premium Transmission 5/1 Adaptable Standard Worm Gearbox For 4 Pole 0.548 kW 112 Size Motor

By Premium Transmission

₹10,147   ₹26,821

You save ₹16,674!

62.17% OFF

The purpose of a gearbox Standard 112 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Reduction Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹46,019   ₹1,26,390

You save ₹80,371!

63.59% OFF

The purpose of a gearbox Double reduction 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Hollow O/p Shaft Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹34,219   ₹92,217

You save ₹57,998!

62.89% OFF

The purpose of a gearbox Hollow O/p shaft 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable With Motor Flange Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹37,759   ₹98,506

You save ₹60,747!

61.67% OFF

The purpose of a gearbox With motor flange 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double I/O Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹38,939   ₹1,00,949

You save ₹62,010!

61.43% OFF

The purpose of a gearbox Double I/O 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Input Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹35,399   ₹95,368

You save ₹59,969!

62.88% OFF

The purpose of a gearbox Double input 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Output Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹31,859   ₹84,547

You save ₹52,688!

62.32% OFF

The purpose of a gearbox Double output 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Standard Worm Gearbox For 4 Pole 6.29 kW 337 Size Motor

By Premium Transmission

₹28,319   ₹73,608

You save ₹45,289!

61.53% OFF

The purpose of a gearbox Standard 337 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Reduction Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹42,479   ₹1,12,489

You save ₹70,010!

62.24% OFF

The purpose of a gearbox Double reduction 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Hollow O/p Shaft Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹29,499   ₹76,322

You save ₹46,823!

61.35% OFF

The purpose of a gearbox Hollow O/p shaft 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable With Motor Flange Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹30,679   ₹78,140

You save ₹47,461!

60.74% OFF

The purpose of a gearbox With motor flange 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double I/O Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹29,499   ₹76,783

You save ₹47,284!

61.58% OFF

The purpose of a gearbox Double I/O 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Input Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹28,319   ₹71,638

You save ₹43,319!

60.47% OFF

The purpose of a gearbox Double input 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Output Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹27,139   ₹69,478

You save ₹42,339!

60.94% OFF

The purpose of a gearbox Double output 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Standard Worm Gearbox For 4 Pole 3.82 kW 287 Size Motor

By Premium Transmission

₹23,599   ₹58,563

You save ₹34,964!

59.7% OFF

The purpose of a gearbox Standard 287 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Ships within 5 days

Premium Transmission 10/1 Adaptable Double Reduction Worm Gearbox For 4 Pole 2.6 kW 237 Size Motor

By Premium Transmission

₹35,399   ₹94,447

You save ₹59,048!

62.52% OFF

The purpose of a gearbox Double reduction 237 Size is to increase or decrease the speed of an enclosed drive. As a result, torque output will inverse the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; the torque output will decrease if the industry increases speed. To understand this, think of how gears work in your car engine. The engine's crankshaft spins twice as fast as the wheels do when in forward gear, but because it is coupled to a gearbox with a ratio of 2:1 (two teeth on one shaft and one tooth on another), it drives the wheels at half its speed. You can see how the above principle would work here: when going from first gear to second gear, it might first seem as though there would be no change in output—the car's wheels are still moving at half of what they were in first gear. But because second gear has four times as many teeth as first gear does, its ratio changes from 2:1 to 4:1—that means that for every turn of the crankshaft, there are four more turns by the wheels. So even though no additional power has been added to upshift, because of more teeth.

Add to Cart Buy Now

Previous Next

Page 1 of 99 results