• Home /
• All Brands /
• Samrat

Have a question? Call us now at +91 9650660070

Samrat Products Online

Showing 40 out of 92 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 4 days

Samrat 8.5mm Braided High Pressure Spray Hose Heavy Duty 50 Mtr- BHW50

By Samrat

Roll of 50 metre

₹3,185   ₹4,100

You save ₹915!

22.32% OFF

Features: WP : 50- 70 Bar BP : 220 Bar Material : PVC & Polyseter

Add to Cart Buy Now

Ships within 3 days

Samrat SHTP-30 1.2-3 KW 12 kgs 2.1-4.5 M.P.A/ 21-45 kg Sprayer Pump

By Samrat

₹6,824  

Samrat SHTP-30 is a 1.2-3 KW 12 kgs 2.1-4.5 M.P.A (kg/hr) at 21-45 kg Sprayer Pump with 200mm x 200mm Diaphragm. This Pump is suitable for applying ULV insecticides, fungicides, herbicides etc.This Sprayer Pump is designed for agricultural purpose. It can spray any liquid that flows because of the porous structure of its inside pump body. This Sprayer Pump operates with 2HP Petrol/2 Cycle gas engine or electrical motor as per your preference.The Samrat SHTP-30 is a high pressure pump with a single cylinder, horizontal and water cooled engine. This is especially designed for spraying chemicals, pesticides and fertilizers used for agriculture purpose. The pump with an advanced inlet filter protects the engine from dust particles that damage its working life and performance.The SHTP-30 Sprayer Pump is a variable volume, diaphragm pump that provides a wide range of flow and pressure capabilities. With a capacity range from 21 to 45 kg/hr and air requirement from 2.1 to 4.5 MPA, this pump is ideal for work in a variety of spraying applications, such as turf spraying and water supply filtration systems. The SHTP-30 Sprayer Pump delivers high pumping performance with minimal noise output and vibrations, ensuring it is suitable for your toughest conditions.

Add to Cart Buy Now

Ships within 6 days

Samrat 24 inch (600 mm) Stainless Steel Straight Edges, No.308

By Samrat

₹4,601   ₹6,726

You save ₹2,125!

31.59% OFF

The Samrat 24 inch (600 mm) Stainless Steel Straight Edges from Samrat is a precision Measuring Tool crafted for professionals and DIY users who demand accuracy and reliability. Made from high-grade stainless steel, it offers excellent corrosion resistance and durability for long-term use.Whether you're aligning surfaces, marking straight lines, or measuring, the Samrat 24 inch (600 mm) Stainless Steel Straight Edges ensures consistent results. Its straight edge design is perfect for woodworking, metalworking, and technical drawing tasks.

Add to Cart Buy Now

Ships within 6 days

Samrat 10 inch (250 mm) Stainless Steel Straight Edges, No.308

By Samrat

₹966   ₹1,381

You save ₹415!

30.03% OFF

The Samrat 10 inch (250 mm) Stainless Steel Straight Edges from Samrat is a precision Measuring Tool crafted for professionals and DIY users who demand accuracy and reliability. Made from high-grade stainless steel, it offers excellent corrosion resistance and durability for long-term use.Whether you're aligning surfaces, marking straight lines, or measuring, the Samrat 10 inch (250 mm) Stainless Steel Straight Edges ensures consistent results. Its straight edge design is perfect for woodworking, metalworking, and technical drawing tasks.

Add to Cart Buy Now

Related Searches

samrat adjustable tap & reamer wrenches

samrat die handles

samrat carbide tipped dead centers

samrat punches

samrat tool holders

Ships within 6 days

Samrat 2-1/2 inch Round Die Handle

By Samrat

₹1,096   ₹1,593

You save ₹497!

31.2% OFF

Samrat 2-1/2 inch Round Die Handle is a tool that is used for holding round split dies. The steel material makes it sturdy and easy to use. It features a three-set screw pattern that helps in holding the adjustable round split dies. The outer diameter of the die is 1 ½ inches, which can accommodate different sizes of round dies. The single piece construction makes it easy to assemble, and there is no additional assembly required for mounting it on the press. Its single piece construction allows for strength and durability. It is available in steel. This handle is the perfect tool for easily holding round split dies. The hole in the center of the handle can be used to attach it to a machine or simply hang it on a hook. The single-piece construction and three-set screw pattern ensure that this handle will stay strong and sturdy. A round die handle is an essential part of any die press. Without the proper handle, it's impossible to hold and operate the die during the stamping process. This handle is constructed from steel, which ensures strength and durability, even when working with larger dies. Its round shape and smooth surface make it easy to hold onto, even while wearing gloves.

Add to Cart Buy Now

Ships within 6 days

Samrat 6 inch (150 mm) Stainless Steel Straight Edges, No.308

By Samrat

₹671   ₹991

You save ₹320!

32.3% OFF

The Samrat 6 inch (150 mm) Stainless Steel Straight Edges from Samrat is a precision Measuring Tool crafted for professionals and DIY users who demand accuracy and reliability. Made from high-grade stainless steel, it offers excellent corrosion resistance and durability for long-term use.Whether you're aligning surfaces, marking straight lines, or measuring, the Samrat 6 inch (150 mm) Stainless Steel Straight Edges ensures consistent results. Its straight edge design is perfect for woodworking, metalworking, and technical drawing tasks.

Add to Cart Buy Now

Ships within 6 days

Samrat 38.1mm(1-1/2 Inch) Round Die Handle

By Samrat

₹223   ₹319

You save ₹96!

30.01% OFF

Samrat 1-1/2 inch Round Die Handle is a tool that is used for holding round split dies. The steel material makes it sturdy and easy to use. It features a three-set screw pattern that helps in holding the adjustable round split dies. The outer diameter of the die is 1 ½ inches, which can accommodate different sizes of round dies. The single piece construction makes it easy to assemble, and there is no additional assembly required for mounting it on the press. Its single piece construction allows for strength and durability. It is available in steel. This handle is the perfect tool for easily holding round split dies. The hole in the center of the handle can be used to attach it to a machine or simply hang it on a hook. The single-piece construction and three-set screw pattern ensure that this handle will stay strong and sturdy. A round die handle is an essential part of any die press. Without the proper handle, it's impossible to hold and operate the die during the stamping process. This handle is constructed from steel, which ensures strength and durability, even when working with larger dies. Its round shape and smooth surface make it easy to hold onto, even while wearing gloves.

Add to Cart Buy Now

Ships within 6 days

Samrat 50.8mm(2 Inch) Round Die Handle

By Samrat

₹447   ₹637

You save ₹190!

29.85% OFF

Samrat 2 inch Round Die Handle is a tool that is used for holding round split dies. The steel material makes it sturdy and easy to use. It features a three-set screw pattern that helps in holding the adjustable round split dies. The outer diameter of the die is 1 ½ inches, which can accommodate different sizes of round dies. The single piece construction makes it easy to assemble, and there is no additional assembly required for mounting it on the press. Its single piece construction allows for strength and durability. It is available in steel. This handle is the perfect tool for easily holding round split dies. The hole in the center of the handle can be used to attach it to a machine or simply hang it on a hook. The single-piece construction and three-set screw pattern ensure that this handle will stay strong and sturdy. A round die handle is an essential part of any die press. Without the proper handle, it's impossible to hold and operate the die during the stamping process. This handle is constructed from steel, which ensures strength and durability, even when working with larger dies. Its round shape and smooth surface make it easy to hold onto, even while wearing gloves.

Add to Cart Buy Now

Ships within 6 days

Samrat 2-1/4 inch Round Die Handle

By Samrat

₹825   ₹1,204

You save ₹379!

31.46% OFF

Samrat 2-1/4 inch Round Die Handle is a tool that is used for holding round split dies. The steel material makes it sturdy and easy to use. It features a three-set screw pattern that helps in holding the adjustable round split dies. The outer diameter of the die is 1 ½ inches, which can accommodate different sizes of round dies. The single piece construction makes it easy to assemble, and there is no additional assembly required for mounting it on the press. Its single piece construction allows for strength and durability. It is available in steel. This handle is the perfect tool for easily holding round split dies. The hole in the center of the handle can be used to attach it to a machine or simply hang it on a hook. The single-piece construction and three-set screw pattern ensure that this handle will stay strong and sturdy. A round die handle is an essential part of any die press. Without the proper handle, it's impossible to hold and operate the die during the stamping process. This handle is constructed from steel, which ensures strength and durability, even when working with larger dies. Its round shape and smooth surface make it easy to hold onto, even while wearing gloves.

Add to Cart Buy Now

Ships within 6 days

Samrat 1/16-3/16 inch Solid Jaw T-Handle Tap Wrench

By Samrat

₹72   ₹106

You save ₹34!

32.2% OFF

Samrat 1/16-3/16 inch Solid Jaw T-Handle Tap Wrench are used to turn taps when making screw threads. The T-handle allows you to work in hard-to-reach places, and the chuck holds the tap steady for accurate threading. This tool is also a useful addition to any toolkit when doing general hand tapping operations, because it provides the reach and leverage needed for accurate tapping in tight spaces. The heavy-duty ductile steel body with knurled chuck, four equalizing jaws to hold the tap true, and sliding T-bar which can be used when tapping against a shoulder or other obstructions means that this tool is a dependable and versatile addition to any workshop or toolbox. A T-handle tap wrench is essentially just a fixed wrench with an extended shank that allows you to turn taps to help make screw threads. It's essentially a fixed tap wrench. A T-handle tap wrench has an extended shank for hard-to-reach tapping jobs. A fixed "T" handle for tapping in open areas. It can be used on other tools with a square head, such as screw extractors and reamers. A heavy knurled Cap for better grip. Ideal tool for general tapping application. It's used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces.

Add to Cart Buy Now

Ships within 6 days

Samrat 5/32-1/4 inch Solid Jaw T-Handle Tap Wrench

By Samrat

₹90   ₹131

You save ₹41!

31.29% OFF

Samrat 5/32-1/4 inch Solid Jaw T-Handle Tap Wrench are used to turn taps when making screw threads. The T-handle allows you to work in hard-to-reach places, and the chuck holds the tap steady for accurate threading. This tool is also a useful addition to any toolkit when doing general hand tapping operations, because it provides the reach and leverage needed for accurate tapping in tight spaces. The heavy-duty ductile steel body with knurled chuck, four equalizing jaws to hold the tap true, and sliding T-bar which can be used when tapping against a shoulder or other obstructions means that this tool is a dependable and versatile addition to any workshop or toolbox. A T-handle tap wrench is essentially just a fixed wrench with an extended shank that allows you to turn taps to help make screw threads. It's essentially a fixed tap wrench. A T-handle tap wrench has an extended shank for hard-to-reach tapping jobs. A fixed "T" handle for tapping in open areas. It can be used on other tools with a square head, such as screw extractors and reamers. A heavy knurled Cap for better grip. Ideal tool for general tapping application. It's used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces.

Add to Cart Buy Now

Ships within 6 days

Samrat 3/16-5/16 inch Solid Jaw T-Handle Tap Wrench

By Samrat

₹116   ₹170

You save ₹54!

31.73% OFF

Samrat 3/16-5/16 inch Solid Jaw T-Handle Tap Wrench are used to turn taps when making screw threads. The T-handle allows you to work in hard-to-reach places, and the chuck holds the tap steady for accurate threading. This tool is also a useful addition to any toolkit when doing general hand tapping operations, because it provides the reach and leverage needed for accurate tapping in tight spaces. The heavy-duty ductile steel body with knurled chuck, four equalizing jaws to hold the tap true, and sliding T-bar which can be used when tapping against a shoulder or other obstructions means that this tool is a dependable and versatile addition to any workshop or toolbox. A T-handle tap wrench is essentially just a fixed wrench with an extended shank that allows you to turn taps to help make screw threads. It's essentially a fixed tap wrench. A T-handle tap wrench has an extended shank for hard-to-reach tapping jobs. A fixed "T" handle for tapping in open areas. It can be used on other tools with a square head, such as screw extractors and reamers. A heavy knurled Cap for better grip. Ideal tool for general tapping application. It's used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces.

Add to Cart Buy Now

Ships within 6 days

Samrat 1/4-1/2 inch Solid Jaw T-Handle Tap Wrench

By Samrat

₹129   ₹184

You save ₹55!

29.92% OFF

Samrat 1/4-1/2 inch Solid Jaw T-Handle Tap Wrench are used to turn taps when making screw threads. The T-handle allows you to work in hard-to-reach places, and the chuck holds the tap steady for accurate threading. This tool is also a useful addition to any toolkit when doing general hand tapping operations, because it provides the reach and leverage needed for accurate tapping in tight spaces. The heavy-duty ductile steel body with knurled chuck, four equalizing jaws to hold the tap true, and sliding T-bar which can be used when tapping against a shoulder or other obstructions means that this tool is a dependable and versatile addition to any workshop or toolbox. A T-handle tap wrench is essentially just a fixed wrench with an extended shank that allows you to turn taps to help make screw threads. It's essentially a fixed tap wrench. A T-handle tap wrench has an extended shank for hard-to-reach tapping jobs. A fixed "T" handle for tapping in open areas. It can be used on other tools with a square head, such as screw extractors and reamers. A heavy knurled Cap for better grip. Ideal tool for general tapping application. It's used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces.

Add to Cart Buy Now

Ships within 6 days

Samrat H-1 13/32-7/16 inch Adjustable Hand Reamer

By Samrat

₹282   ₹425

You save ₹143!

33.62% OFF

Samrat H-1 13/32-7/16 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-2 7/16-15/32 inch Adjustable Hand Reamer

By Samrat

₹306   ₹460

You save ₹154!

33.51% OFF

Samrat H-2 7/16-15/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-3 15/32-17/32 inch Adjustable Hand Reamer

By Samrat

₹329   ₹503

You save ₹174!

34.55% OFF

Samrat H-3 15/32-17/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-4 17/32-19/32 inch Adjustable Hand Reamer

By Samrat

₹353   ₹548

You save ₹195!

35.53% OFF

Samrat H-4 17/32-19/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-5 19/32-21/32 inch Adjustable Hand Reamer

By Samrat

₹365   ₹566

You save ₹201!

35.56% OFF

Samrat H-5 19/32-21/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-6 21/32-23/32 inch Adjustable Hand Reamer

By Samrat

₹400   ₹609

You save ₹209!

34.31% OFF

Samrat H-6 21/32-23/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-7 23/32-25/32 inch Adjustable Hand Reamer

By Samrat

₹412   ₹637

You save ₹225!

35.34% OFF

Samrat H-7 23/32-25/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-8 25/32-27/32 inch Adjustable Hand Reamer

By Samrat

₹435   ₹673

You save ₹238!

35.33% OFF

Samrat H-8 25/32-27/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-9 27/32-15/16 inch Adjustable Hand Reamer

By Samrat

₹483   ₹743

You save ₹260!

35.03% OFF

Samrat H-9 27/32-15/16 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-10 15/16-1-1/16 inch Adjustable Hand Reamer

By Samrat

₹518   ₹797

You save ₹279!

34.97% OFF

Samrat H-10 15/16-1-1/16 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-11 1-1/16-1-3/16 inch Adjustable Hand Reamer

By Samrat

₹636   ₹991

You save ₹355!

35.84% OFF

Samrat H-11 1-1/16-1-3/16 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-12 1-3/16-1-11/32 inch Adjustable Hand Reamer

By Samrat

₹825   ₹1,274

You save ₹449!

35.26% OFF

Samrat H-12 1-3/16-1-11/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-13 1-11/32-1-1/2 inch Adjustable Hand Reamer

By Samrat

₹1,025   ₹1,593

You save ₹568!

35.66% OFF

Samrat H-13 1-11/32-1-1/2 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-14 1-1/2-1-13/16 inch Adjustable Hand Reamer

By Samrat

₹1,297   ₹1,947

You save ₹650!

33.38% OFF

Samrat H-14 1-1/2-1-13/16 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-16 2-7/32-2-3/4 inch Adjustable Hand Reamer

By Samrat

₹4,837   ₹7,434

You save ₹2,597!

34.93% OFF

Samrat H-16 2-7/32-2-3/4 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-V 9/32-5/16 inch Adjustable Hand Reamer

By Samrat

₹235   ₹354

You save ₹119!

33.62% OFF

Samrat H-V 9/32-5/16 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-W 5/16-11/32 inch Adjustable Hand Reamer

By Samrat

₹235   ₹354

You save ₹119!

33.62% OFF

Samrat H-W 5/16-11/32 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-Y 11/32-3/8 inch Adjustable Hand Reamer

By Samrat

₹235   ₹354

You save ₹119!

33.62% OFF

Samrat H-Y 11/32-3/8 inch Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat H-Z Adjustable Hand Reamer

By Samrat

₹235   ₹354

You save ₹119!

33.62% OFF

Samrat H-Z Adjustable Hand Reamer is a tool that every mechanic needs in his bag of tricks. It's used to clean out metal tubing and allows the technician to make repairs on the go—no need to head back to the shop for reshaping or replacement. They're available with a variety of blade sizes, so you can find one that fits your needs. While they are not as versatile as power tools, they have the advantage of being much lighter and more portable. Adjustable hand reamers are used to make holes in steel. They're made of high-carbon steel, and they can cut a wide range of holes, depending on the size of their blades. The blades are held in place by two nuts that tighten down on the body of the reamer. When you want to change the blade size, you loosen one nut and tighten the other. You can use an adjustable hand reamer for making a variety of holes, including ones for bolts, screws, and rivets. Hand reamers are used for cutting irregular holes. The tool uses a tapered blade to bore holes in irregular material. The tool consists of a handle, a frame, and a blade. The frame is connected to the handle by a thumb screw. The blade is an interchangeable, double-edged, symmetrical blade. The blades are made of high-carbon steel that can be sharpened on an oilstone or a bench grinder. They can be adjusted by loosening one nut while tightening the other.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-1 Dead Centre C.S. Male

By Samrat

₹223   ₹319

You save ₹96!

30.01% OFF

Samrat MT-1 Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-2 Dead Centre C.S. Male

By Samrat

₹223   ₹319

You save ₹96!

30.01% OFF

Samrat MT-2 Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-3 Dead Centre C.S. Male

By Samrat

₹388   ₹566

You save ₹178!

31.5% OFF

Samrat MT-3 Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-4 Dead Centre C.S. Male

By Samrat

₹660   ₹956

You save ₹296!

30.95% OFF

Samrat MT-4 Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-5 Dead Centre C.S. Male

By Samrat

₹1,769   ₹2,478

You save ₹709!

28.61% OFF

Samrat MT-5 Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-4 Carbide Dead Centre

By Samrat

₹1,533   ₹2,124

You save ₹591!

27.82% OFF

Samrat MT-4 Carbide Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-5 Carbide Dead Centre

By Samrat

₹3,421   ₹4,956

You save ₹1,535!

30.97% OFF

Samrat MT-5 Carbide Dead Centre are designed for use in machining processes that require a carbide tip to perform effectively. These carbide-tipped dead centers have been designed for use with cylindrical stock with larger diameters and/or extra length. The large-diameter carbide tips are perfect for machining larger holes. Dead centers are used to accurately position workpieces and tools during machine operation. They come in a variety of sizes and shapes, which depend on their function, the size of the hole they will be placed in, and whether they are standard or custom tools. A high-speed steel tool body is precision ground to tight tolerances to maintain accuracy and extend tool life. Mounted on top is an accurately ground carbide insert which provides a positive lock against rotation or movement during use. The insert is carefully finished with a smooth center radius for stability and durability. It's one of the most critical parts of any CNC machine, and this is especially true for large, high-speed machining centers with live spindles. Without a dead center, there would be no way to keep the boring bar in line with the workpiece as it spins. Extra length gives you much more clearance than your average dead center and will be ideal for applications where there's a lot of movement or interference from surrounding components.

Add to Cart Buy Now

Ships within 6 days

Samrat MT-1 Standard Male Point Revolving Centre with 60 deg

By Samrat

₹1,533   ₹2,124

You save ₹591!

27.82% OFF

Samrat MT-1 Standard Male Point Revolving Centre with 60 deg is a product that's designed for multiple applications. Its flexibility, light weight, and durability make it ideal for lathes of all sorts, from the most basic to the most advanced. It's made from high-quality materials as well, so it can be used for years and years without any problems. The spindle and the sharpness shaft are made of high-quality alloy steel. The hardness can be up to HRC58-62, which is durable and not easy to wear. The spindle is polished with a grinding wheel, making the surface smooth and shiny. It's great because it allows you to remove the cutting tool from the workpiece when changing its position or when you want to remove it for any reason. The oil cup design of this product is what makes it so efficient. There is a lot of variation in the design of different point-revolving centers, and as a result, there's no single standard for how they should be made. Some point-revolving centers are designed for use only at the end of the spindle, and won't allow you to rotate the piece at any other point along its length. The oil cup is an age-old mechanism that helps keep moving parts lubricated. It will leak out over time, so frequent oiling is required.

Add to Cart Buy Now

Previous Next

Page 1 of 3 results