• Home /
• Hand Tools /
• Clamps & Bolts /
• V-Blocks & Clamping Sets

Have a question? Call us now at +91 9650660070

V-Blocks & Clamping Sets

Showing 40 out of 101 products

Sort by

Recommended New Price : Low to High Price : High to Low

Flash Deal

Ships within 24 hrs

PowerHouse High-Precision Cast Iron V-Shaped Block

By PowerHouse

₹2,241 - ₹6,017

PowerHouse High-Precision CAST IRON V-BLOCK is a magnetic vee block. It comes with high-precision cast iron material. This vee block is ideal for holding small parts, tools or other items in place while working on them. It is a smart tool that will enhance the efficiency of your work by providing you with increased control as well as safety when handling different pieces.

Type of Product : Magnetic Vee Block

Material : High-Precision Cast Iron

Application : Industrial

Color : Silver

Finish Type : Chrome

Explore other Variants (4)

Ships within 5 days

Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1802HP

By Crystal

Set of 2 piece

₹12,979  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 3 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block 1806HS

By Crystal

₹28,319  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 4 Inch Hardened and Ground Magnetic V Block 1801HS

By Crystal

₹11,327  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 4 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block 1803HS

1

By Crystal

₹3,775  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 4 Inch Hardened and Ground V Block With Clamp Set of 2 Pcs 1713P

By Crystal

Set of 2 piece

₹9,557  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 5 days

Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block 1802HS

By Crystal

₹7,079  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 3 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1803HP

By Crystal

Set of 2 piece

₹6,607  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block 1805HS

By Crystal

₹22,419  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 6 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 4 Inch Hardened and Ground Magnetic V Block Set of 2 Pcs 1801HP

By Crystal

Set of 2 piece

₹24,779  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 4 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 3 days

MART YANTRAM Magnetic V Block (Pack of 2)

By SMART YANTRAM

Pack of 2 piece

₹5,781 - ₹6,253

The SMART YANTRAM Magnetic V Block Pack of 2 is a precision-engineered tool designed for holding and positioning cylindrical, round, and irregular workpieces during machining and inspection tasks. Built with strong magnetic force, these V blocks ensure firm gripping on ferrous materials, enabling accurate alignment for drilling, grinding, milling, and marking operations. Manufactured using high-quality materials, these magnetic V blocks provide durability, stability, and long-lasting performance in industrial environments. The V-shaped design allows secure placement of pipes, rods, and shafts, improving work efficiency and precision. Supplied as a pack of two, they are ideal for workshops, tool rooms, and engineering applications where consistent and reliable workpiece holding is essential.

Type of Product : Magnetic V Block

Material : Solid Steel

Control : Rotary ON–OFF action knob

Magnetic : Permanent magnet

Explore other Variants (2)

Ships within 5 days

Crystal 50.8mm(2 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1711P

By Crystal

Set of 2 piece

₹4,719  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 5 days

TORRENS Hard Magnetic V Block 934

By TORRENS

₹6,725  

The sturdy and compact Magnetic V Block is ideal for applications such as mechanics, construction, plumbing and welding. The V-shaped design allows wood, metal and plastic pieces to be turned up side down without damaging them. Featuring an easy-to-hold metal handle, this tool features a rubber base which resists damage from metal shavings. It has a heavy duty feel, with the added benefit of a magnetic bottom to hold the work piece in place. This product is a one stop solution to fix the problem of keeping small and hevy parts steady in one place in a production environment.

Add to Cart Buy Now

Ships within 5 days

Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1806HP

By Crystal

Set of 2 piece

₹56,639  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB16 Magnetic V Block 65x65x50mm

By Gurunanak International

₹4,601  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 5 days

Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1805HP

By Crystal

Set of 2 piece

₹35,399  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 6 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

OZAR Casted V-Blocks, AVB Series

By OZAR

₹2,359 - ₹2,713

The OZAR Casted V-Blocks, AVB Series are precision-engineered tools designed to securely hold and support cylindrical workpieces for accurate machining, inspection, and assembly processes. These V-blocks are cast from high-quality materials to ensure durability, rigidity, and dimensional stability. The AVB Series is specifically built to handle heavy-duty applications while providing reliable and consistent performance. Each V-block features two precisely aligned V-shaped grooves that allow for easy and secure placement of cylindrical parts, such as shafts or rods, in a vertical or horizontal orientation. The design ensures minimal movement during operations, enhancing safety and accuracy. These V-blocks are often used in conjunction with clamping devices or alongside other workholding solutions, making them ideal for tasks such as grinding, milling, and honing. The AVB Series comes with additional features like through holes for clamping and mounting, and are typically manufactured with a high tolerance for precision and ease of use. The casted material provides a robust foundation, while the surfaces are often ground or finished to ensure a smooth, flat working area. Whether used in machine shops, quality control environments, or assembly lines, the OZAR Casted V-Blocks deliver exceptional value and performance for a variety of industrial applications.

Type of Product : Casted V-Blocks

Explore other Variants (2)

Ships within 3 days

Gurunanak International MVB18 Magnetic V Block 100X95X75mm

By Gurunanak International

₹5,781  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB1 Magnetic V Block 65x65x50mm

By Gurunanak International

Set of 2 piece

₹5,427  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Assorts V Block Pair Tool Steel 40x44x72 mm Size for Enhanced Stability

By Assorts

₹2,359  

The V Block Pair from Assorts. This high-performance Workshop Tools, model: , is expertly crafted with Tool Steel 40x44x72 mm Size for Enhanced Stability for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The V Block Pair is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts V Block Pair. The thoughtfully selected Tool Steel 40x44x72 mm Size for Enhanced Stability are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the V Block Pair for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

Assorts V-Block Pair Cast Iron 50 mm (2 Inch) Size 52x38x25 mm Dimension

By Assorts

₹2,831  

Achieve unmatched precision and reliability with the V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm from Assorts. This high-performance Workshop Tools, model: , is expertly crafted with for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm. The thoughtfully selected are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

SMART YANTRAM Magnetic V Block 100x95x75 mm, 934 S (Pack of 2)

By SMART YANTRAM

Pack of 2 piece

₹7,197  

The SMART YANTRAM 934 S Magnetic V Block (Pack of 2) is a precision-engineered matched pair designed for accurate holding of cylindrical and irregular workpieces. Made from fully sealed solid steel, these V blocks provide high and constant magnetic pull for secure clamping during scribing, grinding, measuring, machining, drilling, and testing operations. Each block features dual V-grooves and three magnetic contact faces, allowing firm holding on any flat ferrous surface. The rotary On-Off control knob enables simultaneous energizing or de-energizing of all faces for convenient operation. Designed for versatility and durability, these V blocks are protected against coolant penetration, ensuring reliable performance even in wet machining environments. They can be used on machines fitted with magnetic chucks without switching the chuck ON. Ideal for tool rooms, quality control departments, and production units, this matched pair ensures enhanced stability and precision for professional applications.

Add to Cart Buy Now

Ships within 5 days

Crystal 76.2 mm (3 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1712P

By Crystal

Set of 2 piece

₹6,961  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB12 Magnetic V Block 80x70x60mm

By Gurunanak International

₹4,719  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB11 Magnetic V Block 65x65x50mm

By Gurunanak International

₹4,129  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB6 Magnetic V Block 65x65x50mm

By Gurunanak International

Set of 2 piece

₹6,135  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

SMART YANTRAM Magnetic V Block 150x95x75 mm, 936 S (Pack of 2)

By SMART YANTRAM

Pack of 2 piece

₹10,383  

The SMART YANTRAM 936 S Magnetic V Block (Pack of 2) is a precision-machined matched pair designed for secure and accurate holding of cylindrical and irregular workpieces. Manufactured from fully sealed solid steel, these V blocks deliver high and constant magnetic pull for dependable clamping during scribing, grinding, measuring, machining, drilling, testing, and light milling operations. Each unit features dual V-grooves and three magnetic contact faces that can be energized or de-energized simultaneously using a convenient rotary On-Off control knob. Built for durability and workshop efficiency, the V blocks are fully sealed to prevent coolant penetration, ensuring consistent performance in wet machining environments. They can be used on magnetic chucks without switching the chuck ON, offering operational flexibility. Ideal for tool rooms, quality control departments, and production units, this matched pair enhances stability, versatility, and precision in professional applications.

Add to Cart Buy Now

Ships within 4 days

Nicon N-307 Precision Magnetic V-Block Hardened 150x95x75mm MVH150

By Nicon

₹24,779   ₹31,848

You save ₹7,069!

22.2% OFF

Made from Special Alloy Steel
Hardened & Ground Finished
Accuracy 0.005/100mm

Add to Cart Buy Now

Ships within 4 days

Nicon N-307 Precision Magnetic V-Block Hardened MVH100

By Nicon

₹18,879   ₹23,588

You save ₹4,709!

19.96% OFF

Made from Special Alloy Steel
Hardened & Ground Finished
Accuracy 0.005/100mm

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 50 x 20 x 100 mm Set of 2 Pcs 1557P

By Crystal

Set of 2 piece

₹4,011  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 60 x 25 x 100 mm Set of 2 Pcs 1556P

By Crystal

Set of 2 piece

₹4,837  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 80 x 25 x 120 mm Set of 2 Pcs 1555P

By Crystal

Set of 2 piece

₹6,843  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 50 x 50 x 100 mm Set of 2 Pcs 1554P

By Crystal

Set of 2 piece

₹4,955  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 60 x 30 x 75 mm Set of 2 Pcs 1552P

By Crystal

Set of 2 piece

₹3,539  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 50 x 35 x 100 mm Set of 2 Pcs 1551P

By Crystal

Set of 2 piece

₹4,719  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 5 days

Crystal 25.4 mm (1 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1714P

By Crystal

Set of 2 piece

₹2,949  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB20 Magnetic V Block 200X95X75mm

By Gurunanak International

₹31,859  

Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Features: Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB19 Magnetic V Block 150X95X75mm

By Gurunanak International

₹7,787  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB17 Magnetic V Block 80x70x60mm

By Gurunanak International

₹5,427  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB15 Magnetic V Block 200X95X75mm

By Gurunanak International

₹30,679  

Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Features: Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility

Add to Cart Buy Now

Previous Next

Page 1 of 3 results