Have a question? Call us now at +91 9650660070
Showing 40 out of 131 products
No. of Tones : 2
Weight : 510 g
Power Consumption : 6VA / Watt Max
Dimension : 96x96x65 mm
Key Features : LED Flasher-0.5Hz Flash supply until removed
Audio Level : 110db
Tone Select Switch : Rear
Type of Product : Hooter
Relay Type : OEN 58DP
Features : LED & Free wheeling diode across coil, Optical isolation between control input and coil.
Frequency : 50/60 Hz
Type of Product : Relay Module
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 2 C/O
No. of Channels : 4
Release Time : 20 ms max.
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Maximum Operating Frequency : Mechanical : 18,000 operations/hr
Electrical : 1,800 operations/hr
Input Current : 10 mA
Type of Product : On Delay / Interval Analog Timer
Application : Industrial Control System
Mounting Type : DIN Rail / Base Mount
Contact Rating : 5 A@230 V AC / 24 V DC, Resistive
Termination : Screw Type, for 2.5 mm sq. Wire
Protection Level : IP40 for Housing, IP20 for Terminals, Finger Safe Terminals
Power Indicator : LED Status Indicator : Power ON, Relay ON
Humidity : 85% RH
Operating Ambient Temperature : 0~55°C
Storage Ambient Temperature : -20°C to 85°C
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 15~35°C, 95% RH Non-Condensing
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : Current ( mA DC)
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Related Searches
No. of Tones : 2
Tone Select Switch : Rear
Type of Product : Hooter
No. of Tones : 2
Tone Select Switch : Rear
Type of Product : Hooter
Features : Electrical life is 100 times that of electromechanical relay, Low input Current, Negligible switching delay.
Frequency : 50/60 Hz
Type of Product : Opto Interface Modules DC - DC
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Current : <15 mA
Output Current : 15 mA
Output Voltage : 5V-30 V DC
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 60 W
Type of Product : DC to DC Converter
Output Voltage : 24 V DC
Application : Industrial Control System
Power : 120 W
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V03-A-A-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 250 W
No. of Tones : 2
Weight : 270 g
Power Consumption : 6 VA / Watt Max.
Dimension : 96x96 mm
Mounting Type : Base Mount
Application : Industrial Control System
Audio Level : 110 db
Tone Select Switch : Rear
Type of Product : Hooter
Humidity : 95% RH Non Condensing
Operating Ambient Temperature : 0~55°C
Termination : Suitable for 2.5 mm² wire
Application : Industrial Control System
Frequency : 47 ~ 63 Hz
Type of Product : Analog Signal Converter
Weight : 240 g
Maximum Input Current : 30 mA
Mounting Type : 35 mm DIN rail
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 90 ~ 270 V AC
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span On Front For Each Output
Features : 4 Point Isolation of 2 KV AC, Low Ripple & Noise, Economical, High Reliability, Compact
Output Specifications : 0-10 V DC, 20 mA maximum
4-20 mA, 500 Load maximum
0-5 V DC, 20 mA maximum
Input Impedance : 10 V : 100K ohm & 20 mA : 10 ohm
Overload Protection : Output short circuit current 30 mA max
Nominal Voltage : 230 V AC/DC
Application : Industrial Control System
Frequency : 47 ~ 63 Hz
Type of Product : Analog Signal Converter
Weight : 240 g
Maximum Input Current : 30 mA
Mounting Type : 35 mm DIN rail
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span On Front For Each Output
Features : 4 Point Isolation of 2 KV AC, Low Ripple & Noise, Economical, High Reliability, Compact
Output Specifications : 0-10 V DC, 20 mA maximum
4-20 mA, 500 Load maximum
0-5 V DC, 20 mA maximum
Input Impedance : 10 V : 100K ohm & 20 mA : 10 ohm
Overload Protection : Output short circuit current 30 mA max
Nominal Voltage : 24 V AC/DC
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 500 W
Type of Product : Directly Soldered Relay Module
Application : Industrial Control System
Features : Reverse Blocking Diode
Relay Type : OEN Relay
Contact : 1 C/O
Coil Voltage : 24 V DC
Features : LED & Free wheeling diode across coil, Reverse Polarity blocking diode.
Frequency : 50/60 Hz
Type of Product : Socket Mounted Relay Module
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 2 C/O
No. of Channels : 4
Release Time : 20 ms max.
Coil Termination : Screw type, for 1.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Maximum Operating Frequency : Mechanical : 18,000 operations/hr
Electrical : 1,800 operations/hr
Relay Type : OEN Relay
Features : Reverse Blocking Diode
Type of Product : Socket Mounted Relay Module
Application : Industrial Control System
Coil Voltage : 24 V DC
Contact : 1 C/O
Coil : Positive Looped Coils
Type of Product : Dual Output SMPS
Application : Industrial Control System
Power : 70 W
Input Voltage (AC/DC) : 90 to 130 V AC, 100 to 160 V DC
Nominal Voltage : 110 V AC/DC
Relay Type : OEN 58
Features : LED & Free wheeling diode across coil. Low current control input.
Frequency : 50/60 Hz
Type of Product : Relay Module
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 2 C/O
No. of Channels : 8
Release Time : 20 ms max.
Coil Termination : Screw type, for 1.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Maximum Operating Frequency : Mechanical : 18,000 operations/hr
Electrical : 1,800 operations/hr
Features : Electrical life is 100 times that of electromechanical relay, Low input Current, Negligible switching delay.
Frequency : 50/60 Hz
Type of Product : Opto Interface Modules AC - DC
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Voltage (AC/DC) : 230VAC
Input Current : <15 mA
Output Current : 15 mA
Output Voltage : 5V-30 V DC
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 360 W
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 60 W
Type of Product : Dual Output Open Frame SMPS
Application : Industrial Control System
Power : 25 W
Mounting Type : DIN Rail Mounting
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Nominal Voltage : 230 V AC/DC
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V12-B-B-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Application : Industrial Control System
Frequency : 47 ~ 63 Hz
Type of Product : Dual Output Analog Signal Converter
Weight : 240 g
Maximum Input Current : 30 mA
Mounting Type : 35 mm DIN rail
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 0~50°C
Auxiliary Range : 18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span On Front For Each Output
Output Specifications : 0-10 V DC, 20 mA maximum
4-20 mA, 500 Load maximum
0-5 V DC, 20 mA maximum
Input Impedance : 10 V : 100 K ohm & 20 mA : 10 ohm
Overload Protection : Output short circuit current 30 mA max
Nominal Voltage : 24 V AC/DC
Input Type : RTD – PT100, 2 or 3 Wire
Humidity : 95% RH Non-Condensing
Features : Optical Isolation between Input & Output. Low Input Current.
Frequency : 50/60 Hz
Type of Product : Solid State Interface Module With Output
Application : Industrial Control System
Coil Voltage : 24 V DC
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Current : <15 mA
Relay Type : OEN 58
Features : LED & Free wheeling diode across coil. Low current control input.
Frequency : 50/60 Hz
Type of Product : Relay Module
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 1 C/O
Release Time : 20 ms max.
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Maximum Operating Frequency : Mechanical : 18,000 operations/hr
Electrical : 1,800 operations/hr
Type of Product : FRC / D-Sub (Male) Connector To Wire
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Input Current : 500 mA
Output Current : 500 mA
Input termination : FRC / D-SUB
Voltage Rating : 100 V DC
Output termination : Screw type, suitable for 2.5 mm sq. wire
Operating Ambient Temperature : 0~55°C, 85% RH
Storage Ambient Temperature : -20°C to 85°C
Type of Product : FRC / D-Sub (M / F) Connector To Wire
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Input Current : 500 mA
Output Current : 500 mA
Input termination : FRC / D-SUB
Voltage Rating : 100 V DC
Output termination : Screw type, suitable for 2.5 mm sq. wire
Operating Ambient Temperature : 0~55°C, 85% RH
Storage Ambient Temperature : -20°C to 85°C
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 250 W
Type of Product : Dual Output SMPS
Application : Industrial Control System
Power : 70 W
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Nominal Voltage : 230 V AC/DC
Features : LED & Free wheeling diode across coil, Reverse Polarity blocking diode.
Frequency : 50/60 Hz
Type of Product : Socket Mounted Relay Module
Application : Industrial Control System
Coil Voltage : 24 V DC
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 2 C/O
Release Time : 20 ms max.
Coil Termination : Screw type, for 1.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V11-B-B-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V16-A-A-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 15~35°C, 95% RH Non-Condensing
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : RTD – PT100, 2 or 3 Wire
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Country of Origin : India
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : DC Voltage
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Power Consumption : 6 VA Max.
Type of Product : On Delay / Interval Analog Timer
Application : Industrial Control System
Mounting Type : Panel Mount
Contact Rating : 5 A@230 V AC / 24 V DC, Resistive
Termination : Screw Type, for 2.5 mm sq. Wire
Protection Level : IP40 for Faceplate
Power Indicator : LED Status Indicator : Power ON, Relay ON
Humidity : 95% RH Non Condensing
Operating Ambient Temperature : 0~55°C
Storage Ambient Temperature : -20°C to 85°C
Power Consumption : 10 VA Max.
Type of Product : Star Delta Analog Timer
Application : Industrial Control System
Mounting Type : DIN Rail / Base Mount
Accuracy : Setting : ±5% of Full Scale, Repeat : ±0.5% or 50 m sec of Full Scale.
Weight : 110 g
Contact Rating : 5 A@230 V AC
Termination : Screw Type, for 2.5 mm sq. Wire
Protection Level : IP40 for Housing, IP20 for Terminals, Finger Safe Terminals
Output Contact : SPDT (1 C/O) each for Star & Delta
Power Indicator : LED Status Indicator : Star Relay ON, Delta Relay ON
Humidity : 95% RH Non Condensing
Operating Ambient Temperature : 0~55°C
Storage Ambient Temperature : -20°C to 85°C
Isolation : Supply Terminals – Contacts : 1.5 kV, 1 min.
Contact Set 1 – Contact Set2 : 1.5 kV, 1 min.
Time Range : Star Run up time range 0-30 sec, 0-60 sec (Switch Selectable)
Change over time : 50 m sec or 100 m sec (Switch Selectable)
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 120 W
Page 1 of 4 results
| Product Name | Specifications | Expected Price | Dispatch Time | Discount |
|---|---|---|---|---|
| Shavison Directly Soldered Relay Module 8 Channel 2 C/O, AS435-48VDC-OE | Coil Termination Screw type, for 1.5 mm sq. wire | Coil Voltage 48 V DC | ₹1,910 | 32 days | -- |
| Shavison DC to DC Converter 120 W 5 Amp, G35-120-24 | Input Voltage (Ac/Dc) -38 to -60 V DC | Nominal Voltage -48 V DC | ₹3,185 | 7 days | -- |
| Shavison Dual Output Signal Converter 0-60 mV Input Voltage 0-10V / 0-5V Output 1, 0-10 V / 0-5 V Output 2, SC2-V03-A-A-24V | Auxiliary Power 6 W / 6 VA max. | Auxiliary Range 16 ~ 36 V AC/18 ~ 36 V DC | ₹2,770 | 7 days | -- |
| Shavison On Delay / Interval Analog Timer DPDT (2 C/O) 12 - 240 V DC, 2 VA Max. (Contact), TADU-60M-U | Accuracy Setting: 5% of Full Scale, Repeat: 0.5% or 50 m sec of Full | Contact Rating 5 A@230 V AC / 24 V DC, Resistive | ₹830 | 3 days | -- |
| Shavison Opto Interface Modules DC - DC 4 Channel, AS523-24V | Coil Termination Screw type, for 2.5 mm sq. wire | Contact Termination Screw type, for 2.5 mm sq. wire | ₹540 | 7 days | -- |
| Shavison Dual Output Signal Converter 0-60 mV Input Voltage 0-10V / 0-5V Output 1, 4-20 mA / 0-20 mA Output 2, SC2-V03-A-B-24V | Auxiliary Power 6 W / 6 VA max. | Auxiliary Range 16 ~ 36 V AC/18 ~ 36 V DC | ₹2,770 | 16 days | -- |
| Shavison Single Output Analog Signal Converter 22.5 mm Slim 0 - 10 V DC Output 4 - 20 mA Input, AS746-153 | Adjustment Type Zero & Span Adjustments On Front | Auxiliary 24 V DC | ₹1,690 | 4 days | -- |
| Shavison DC to DC Converter 24 W 1 Amp, G34-24-24 | Input Voltage (Ac/Dc) 18 to 36 V DC | Nominal Voltage 24 V DC | ₹1,769 | 7 days | -- |
| Shavison Socket Mounted Relay Module 1 Channel 1 C/O Isolated Coils, AS621-24VAC-S-OE | Coil Isolated Coils | Coil Voltage 24 V AC | ₹310 | 12 days | -- |
| Shavison Relay Module 4 Channel 2 C/O, AS720-5V-12V-OE | Coil Termination Screw type, for 2.5 mm sq. wire | Coil Voltage 12 V DC | ₹1,530 | 24 hrs | -- |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
