Have a question? Call us now at +91 9650660070
Showing 40 out of 127 products
Relay Type : OEN 58DP
Features : LED & Free wheeling diode across coil, Optical isolation between control input and coil.
Frequency : 50/60 Hz
Type of Product : Relay Module
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 2 C/O
No. of Channels : 4
Release Time : 20 ms max.
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Maximum Operating Frequency : Mechanical : 18,000 operations/hr
Electrical : 1,800 operations/hr
Input Current : 10 mA
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 15~35°C, 95% RH Non-Condensing
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : Current ( mA DC)
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Type of Product : On Delay / Interval Analog Timer
Application : Industrial Control System
Mounting Type : DIN Rail / Base Mount
Contact Rating : 5 A@230 V AC / 24 V DC, Resistive
Termination : Screw Type, for 2.5 mm sq. Wire
Protection Level : IP40 for Housing, IP20 for Terminals, Finger Safe Terminals
Power Indicator : LED Status Indicator : Power ON, Relay ON
Humidity : 85% RH
Operating Ambient Temperature : 0~55°C
Storage Ambient Temperature : -20°C to 85°C
Features : Electrical life is 100 times that of electromechanical relay, Low input Current, Negligible switching delay.
Frequency : 50/60 Hz
Type of Product : Opto Interface Modules DC - DC
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Current : <15 mA
Output Current : 15 mA
Output Voltage : 5V-30 V DC
Related Searches
Type of Product : DC to DC Converter
Output Voltage : 24 V DC
Application : Industrial Control System
Power : 120 W
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V03-A-A-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Type of Product : Dual Output Open Frame SMPS
Application : Industrial Control System
Power : 25 W
Mounting Type : DIN Rail Mounting
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Nominal Voltage : 230 V AC/DC
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 60 W
Features : Electrical life is 100 times that of electromechanical relay, Low input Current, Negligible switching delay.
Frequency : 50/60 Hz
Type of Product : Solid State Interface Module With NPN Output
Application : Industrial Control System
Coil Voltage : 24 V
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Current : 15 mA
Output Current : 2.5 Amp
Output Voltage : 24 V DC
Relay Type : OEN 58
Features : LED & Free wheeling diode across coil. Low current control input.
Frequency : 50/60 Hz
Type of Product : Relay Module
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Operating Time : 15 ms max.
Contact : 2 C/O
No. of Channels : 8
Release Time : 20 ms max.
Coil Termination : Screw type, for 1.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Maximum Operating Frequency : Mechanical : 18,000 operations/hr
Electrical : 1,800 operations/hr
Type of Product : FRC / D-Sub (M / F) Connector To Wire
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Input Current : 500 mA
Output Current : 500 mA
Input termination : FRC / D-SUB
Voltage Rating : 100 V DC
Output termination : Screw type, suitable for 2.5 mm sq. wire
Operating Ambient Temperature : 0~55°C, 85% RH
Storage Ambient Temperature : -20°C to 85°C
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 250 W
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 120 W
Type of Product : FRC / D-Sub (Female) Connector To Wire
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Input Current : 500 mA
Output Current : 500 mA
Input termination : FRC / D-SUB
Voltage Rating : 100 V DC
Output termination : Screw type, suitable for 2.5 mm sq. wire
Operating Ambient Temperature : 0~55°C, 85% RH
Storage Ambient Temperature : -20°C to 85°C
Application : Industrial Control System
Frequency : 47 ~ 63 Hz
Type of Product : Analog Signal Converter
Weight : 240 g
Maximum Input Current : 30 mA
Mounting Type : 35 mm DIN rail
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 90 ~ 270 V AC
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span On Front For Each Output
Features : 4 Point Isolation of 2 KV AC, Low Ripple & Noise, Economical, High Reliability, Compact
Output Specifications : 0-10 V DC, 20 mA maximum
4-20 mA, 500 Load maximum
0-5 V DC, 20 mA maximum
Input Impedance : 10 V : 100K ohm & 20 mA : 10 ohm
Overload Protection : Output short circuit current 30 mA max
Nominal Voltage : 230 V AC/DC
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 6 W
Type of Product : General Purpose SMPS
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 120 W
Type of Product : Dual Output SMPS
Application : Industrial Control System
Power : 70 W
Input Voltage (AC/DC) : 90 to 130 V AC, 100 to 160 V DC
Nominal Voltage : 110 V AC/DC
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 250 W
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V14-A-A-U
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 90 ~ 270 V AC/100 ~ 300 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Type of Product : Directly Soldered Relay Module
Application : Industrial Control System
Features : Reverse Blocking Diode
Relay Type : OEN Relay
Contact : 1 C/O
Coil Voltage : 24 V DC
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 15~35°C, 95% RH Non-Condensing
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : Thermocouple J Type
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 500 W
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 120 W
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 100 to 270 V AC, 110 to 360 V DC
Power : 24 W
Features : Electrical life is 100 times that of electromechanical relay, Low input Current, Negligible switching delay.
Frequency : 50/60 Hz
Type of Product : Opto Interface Modules AC - DC
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Voltage (AC/DC) : 230VAC
Input Current : <15 mA
Output Current : 15 mA
Output Voltage : 5V-30 V DC
Features : Optical Isolation between Input & Output. Low Input Current.
Frequency : 50/60 Hz
Type of Product : Solid State Interface Module With Output
Application : Industrial Control System
Coil Voltage : 24 V DC
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Current : <15 mA
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V16-A-A-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V11-A-B-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Application : Industrial Control System
Series : SC2
Type of Product : Dual Output Signal Converter
Model No : SC2-V11-A-A-24V
Mounting Type : 35 mm DIN rail
Power Indicator : Green LED on Front
Auxiliary Power : 6 W / 6 VA max.
Auxiliary Ripple : 1.8 V P-P
Range Selection : Using DIP Switches
Operating Ambient Temperature : 0~50°C, 95% RH Non-Condensing
Auxiliary Range : 16 ~ 36 V AC/18 ~ 36 V DC
Storage Ambient Temperature : -20°C to 85°C
Maximum Rated Input : 5% of full scale in selected input range
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Operating Ambient Temperature : 15~35°C, 95% RH Non-Condensing
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : Thermocouple K Type
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Application : Industrial Control System
Type of Product : Single Output Analog Signal Converter
Country of Origin : India
Response Time : < 15 ms
Maximum Input Voltage : 100 V
Power Indicator : Power on LED
Auxiliary Ripple : Less than 1% of Span
Storage Ambient Temperature : -20°C to 85°C
Adjustment Type : Zero & Span Adjustments On Front
Input Impedance : 10 V : 100 K Ohm
Overload Protection : Output short circuit current 30 mA max
Input Type : DC Voltage
Auxiliary : 24 V DC
Slim Size : 22.5 mm
Type of Product : General Purpose SMPS
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 60 W
Type of Product : Switch Mode Power Supply (SMPS)
Input Voltage (AC/DC) : 185 to 270 V AC, 200 to 360 V DC
Power : 60 W
Features : Optical Isolation between Input & Output. Low Input Current.
Frequency : 50/60 Hz
Type of Product : Solid State Interface Module With Output
Application : Industrial Control System
Coil Voltage : 230 V AC
Mounting Type : 35 mm DIN rail
Coil Termination : Screw type, for 2.5 mm sq. wire
Contact Termination : Screw type, for 2.5 mm sq. wire
Input Current : 15 mA
Power Consumption : 2 VA Max.
Type of Product : Forward-Pause-Reverse Analog Timer
Application : Industrial Control System
Model No : TAFR-8M-U
Mounting Type : DIN Rail / Base Mount
Accuracy : Setting : ±5% of Full Scale, Repeat : ±0.5% or 50 m sec of Full Scale.
Weight : 120 g
Contact Rating : 5 A@230 V AC / 24 V DC, Resistive
Termination : Screw Type, for 2.5 mm sq. Wire
Protection Level : IP40 for Housing, IP20 for Terminals, Finger Safe Terminals
Output Contact : 1 C/O (SPDT) each for Forward & Reverse
Power Indicator : LED Status Indicator : Power ON, Relay ON
Humidity : 95% RH Non Condensing
Operating Ambient Temperature : 0~55°C
Storage Ambient Temperature : -20°C to 85°C
Isolation : Supply Terminals – Contacts : 1.5 kV, 1 min
Contact Set 1 – Contact Set 2 : 1.5 kV, 1 min
Time Range : Run Time
1/2/4/8 sec / min (Switch Selectable)
Pause Time
1/2/4/8/10/20/40/80 sec / min (Switch Selectable)
Power Consumption : 10 VA Max.
Type of Product : Star Delta Analog Timer
Application : Industrial Control System
Mounting Type : DIN Rail / Base Mount
Accuracy : Setting : ±5% of Full Scale, Repeat : ±0.5% or 50 m sec of Full Scale.
Weight : 110 g
Contact Rating : 5 A@230 V AC
Termination : Screw Type, for 2.5 mm sq. Wire
Protection Level : IP40 for Housing, IP20 for Terminals, Finger Safe Terminals
Output Contact : SPDT (1 C/O) each for Star & Delta
Power Indicator : LED Status Indicator : Star Relay ON, Delta Relay ON
Humidity : 95% RH Non Condensing
Operating Ambient Temperature : 0~55°C
Storage Ambient Temperature : -20°C to 85°C
Isolation : Supply Terminals – Contacts : 1.5 kV, 1 min.
Contact Set 1 – Contact Set2 : 1.5 kV, 1 min.
Time Range : Star Run up time range 0-30 sec, 0-60 sec (Switch Selectable)
Change over time : 50 m sec or 100 m sec (Switch Selectable)
Relay Type : OEN Relay
Type of Product : Socket Mounted Relay Module
Application : Industrial Control System
Contact : 1 C/O
Coil : High Voltage Isolated Coils
Type of Product : FRC / D-Sub (Male) Connector To Wire
Application : Industrial Control System
Mounting Type : 35 mm DIN rail
Input Current : 500 mA
Output Current : 500 mA
Input termination : FRC / D-SUB
Voltage Rating : 100 V DC
Output termination : Screw type, suitable for 2.5 mm sq. wire
Operating Ambient Temperature : 0~55°C, 85% RH
Storage Ambient Temperature : -20°C to 85°C
Page 1 of 4 results
| Product Name | Expected Price | Dispatch Time | Discount |
|---|---|---|---|
| L&T [ Lauritz Knudsen ] 415 V 1A/5A APFC Controller 144x144 mm, CS90903OOOO | ₹17,900 | 6 days | -- |
| Siemens 3UG4582-1AW31 0-250 V Insulation monitoring relay 1-110 kΩ | ₹36,579 | 45 days | 31.61% OFF |
| Omron Rotary Encoder Incremental Type, E6C3-CWZ5GH 3600P/R 1M | ₹34,219 | 24 hrs | -- |
| INDUSTRIAL COMPUTER I7-IPC6000 Intel Chipset HM76 with 8 GB DDR3 RAM & 1 TB Storage | ₹110,919 | 16 days | -- |
| Siemens 132 kw 110-230 V AC/DC Sirius Digital Soft Starter 3RW5073-6AB14 | ₹247,799 | 45 days | 32.37% OFF |
| Siemens 37 kw 110-230 V AC/DC Sirius Digital Soft Starter 3RW4038-1BB14 | ₹117,999 | 45 days | 35.47% OFF |
| Fluxteq Thin Film Heat Flux Sensor Copper | ₹33,039 | 5 days | -- |
| L&T [ Lauritz Knudsen ] J648B1 240VAC Daily Time Switch | ₹1,651 | 24 hrs | -- |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
