• Home /
• Electrical /
• Fuses, Circuit Breakers & Components /
• Industrial Plug and Sockets

Have a question? Call us now at +91 9650660070

Industrial Plug And Sockets

Showing 40 out of 822 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 4 days

Smartshaa BS 202 D JB BB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,135  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 D JB IL Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,489  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 D JB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,371  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 202 C HR Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹6,607  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Related Searches

mennekes industrial plug and sockets

schneider electric industrial plug and sockets

smartsaa industrial plug and sockets

cape electric industrial plug and sockets

controlwell industrial plug and sockets

Ships within 4 days

Smartshaa BS 202 D TS ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹5,899  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 101 C HR Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹4,601  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 D TS Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,719  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 202 F TS Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹9,911  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 D IL Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,955  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 D Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,719  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D JB BB IL Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,253  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D JB BB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹5,899  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 202 D JB ILA Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹5,191  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D JB IL Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹5,899  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 202 D JB Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹4,601  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D JB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹5,073  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 202 D TS ILA Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹4,601  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D TS IL Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,719  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa PC 202 D ILA Heavy Duty Manual Reset Pull Cord Switch

By SMARTsaa

₹4,365  

Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency by pulling the rope. Pull cord switch is mounted on the walkway side of the conveyor belt about every 30 meters. When the rope is pulled from any side the switch gets operated. Unless and until the handle is reset manually to normal position the switch remains in operated condition. NC contacts of all pull cord switches are wired in series and further connected to PLC. When any switch along the belt operates the contact opens and conveyor is stopped.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D TS Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,365  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 D Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,129  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C JB ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,961  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C IL A Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,719  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C JB BB ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,961  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C JB BB ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,489  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C JB BB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,371  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C JB BB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,371  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C JB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,135  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C JB ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹6,253  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C TS ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,719  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C JB Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹5,899  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C TS Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,601  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C ILA Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,483  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C TS Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,129  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 202 C Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹4,365  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

Smartshaa BS 101 C Heavy Duty Auto Reset Belt Sway Switch

By SMARTsaa

₹3,893  

Belt-sway switch is generally mounted on both side preferably at about every 30 meters s and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit the belt edge pushes the contact roller which drives the switch and operates the contacts. The switch resets automatically when the belt resumes normal running.

Add to Cart Buy Now

Ships within 4 days

SMARTsaa DBD R Metal Damaged Belt Detector

By SMARTsaa

₹18,879  

Add to Cart Buy Now

Ships within 4 days

SMARTsaa SMARTsaaMFS Metal Damaged Belt Detector

By SMARTsaa

₹29,499  

SMARTsaa Damaged Belt Detectors are designed to detect belt damage in conveyor belts and protects the drive system against premature failure. In combination with SMARTsaa Rubber Tension Sleeves, they also detect belt tension and take measures to prevent overloading the belt. The detectors are equipped with an infrared sensor that detects parts of the belt that have come off in shreds, steel ropes that stand off from the belt and torn edges of the belt. The detector has a self-diagnostic function and is equipped with a microprocessor. An external alarm enables the operator to recognize that a unit is defective without having to go close to it. This allows for fast replacement of faulty units. The units are connected by two spans of special PVC coated cable. One end of the cable mounts permanently to a support bracket and the other end is connected to a spring loaded ball located in a DBD unit. The switch gets actuated when an object or broken belt surface sweeps away one or both cables pulling spring loaded ball out of socket

Add to Cart Buy Now

Ships within 4 days

SMARTsaa SMARTsaaDBD I 1630 Metal Damaged Belt Detector

By SMARTsaa

₹33,039  

SMARTsaa Damaged Belt Detectors are designed to detect belt damage in conveyor belts and protects the drive system against premature failure. In combination with SMARTsaa Rubber Tension Sleeves, they also detect belt tension and take measures to prevent overloading the belt. The detectors are equipped with an infrared sensor that detects parts of the belt that have come off in shreds, steel ropes that stand off from the belt and torn edges of the belt. The detector has a self-diagnostic function and is equipped with a microprocessor. An external alarm enables the operator to recognize that a unit is defective without having to go close to it. This allows for fast replacement of faulty units. The units are connected by two spans of special PVC coated cable. One end of the cable mounts permanently to a support bracket and the other end is connected to a spring loaded ball located in a DBD unit. The switch gets actuated when an object or broken belt surface sweeps away one or both cables pulling spring loaded ball out of socket

Add to Cart Buy Now

Ships within 4 days

SMARTsaa BMS TS B Metal Damaged Belt Detector

By SMARTsaa

₹49,559  

SMARTsaa Damaged Belt Detectors are designed to detect belt damage in conveyor belts and protects the drive system against premature failure. In combination with SMARTsaa Rubber Tension Sleeves, they also detect belt tension and take measures to prevent overloading the belt. The detectors are equipped with an infrared sensor that detects parts of the belt that have come off in shreds, steel ropes that stand off from the belt and torn edges of the belt. The detector has a self-diagnostic function and is equipped with a microprocessor. An external alarm enables the operator to recognize that a unit is defective without having to go close to it. This allows for fast replacement of faulty units. The units are connected by two spans of special PVC coated cable. One end of the cable mounts permanently to a support bracket and the other end is connected to a spring loaded ball located in a DBD unit. The switch gets actuated when an object or broken belt surface sweeps away one or both cables pulling spring loaded ball out of socket

Add to Cart Buy Now

Previous Next

Page 6 of 21 results