• Home /
• Lab Supplies /
• Laboratory Equipments /
• Rotary Mixer

Have a question? Call us now at +91 9650660070

Rotary Mixer

Showing 38 out of 38 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

SESW 230 Mm 33 Rpm Analog Blood Roller Mixer

By SESW

₹2,595  

The SESW 230 mm 33 rpm Analog Blood Roller Mixer is a piece of lab equipment that is used in labs. This device can be used to mix and roll tubes of blood. It is made from steel, which makes it very durable. It has a belt that is 230 mm wide and 33 revolutions per minute. Its belt is made from cellulose acetate. The belt has a volume of 45 ml and it weighs approximately 1.5 kg.This Blood Roller Mixer can be used to create a fresh batch of pig's blood. The device has three separate chambers, one for ice-cold water, one for heparinized whole blood, and one for mixing. Each chamber is isolated from the others with a sliding door. After preparing each chamber, they are chilled in a freezing bath at -20℃ until they are needed. The device is then placed in an ice water bath at -2℃ and connected to a vacuum pump. As the pump is turned on, the vacuum pulls water into the chambers through holes in their bottoms. When all three chambers are filled, the blood and water mixture begins to circulate from chamber one to two and back again. This process continues until the desired volume of blood has been created.The motor of the mixer is located inside the shaft, which provides an efficient way to mix fluids without using a lot of energy. This means that there is no need for heating because it will not overheat during use. The wire coil inside makes sure that the electric current flows through the liquid while mixing to help create a homogeneous mixture.

Add to Cart Buy Now

Ships within 2 days

Nuon NL-RM-01 Rolling Shaker Speed Upto 100rpm

By Nuon

₹41,299  

Additional Features:
Input : AC 100-240V / 50-60Hz
Number of rolls : 7
Timer : 1s - 24h/ continuous operation
Shaking motion : Rocking and rolling
Amplitude : 23±1mm
Display : LCD display speed and time
Motor type : Bruhless motor

Add to Cart Buy Now

Ships within 2 days

Nuon NL-WS-80R Wheel Shaker Speed Upto 80rpm

By Nuon

₹53,099   ₹54,669

You save ₹1,570!

2.87% OFF

Additional Features:
Voltage : AC 100-240V
Frequency : 50-60Hz
Timer : 1s - 24h/ continuous operation
Shaking Motion : Rotating
Angle : Adjustable from 0º - 90º
Display : LCD display speed and time
Motor type : Brushless motor

Add to Cart Buy Now

Ships within 4 days

Benchmark Scientific Rotating Mixer - R5010

By BENCHMARK SCIENTIFIC

₹2,47,799   ₹2,50,198

You save ₹2,399!

0.96% OFF

Add to Cart Buy Now

Related Searches

labtronics rotary mixer

tarson rotary mixer

abdos rotary mixer

Ships within 3 days

Labcare 230 mm 33 rpm Blood Roller Mixer LB-BRM4

By Labcare

₹3,303   ₹6,499

You save ₹3,196!

49.18% OFF

The Labcare 230 mm 33 rpm Blood Roller Mixer LB-BRM4 is a high-quality laboratory instrument designed for the gentle mixing of blood samples in tubes or bottles. The roller mixer is specifically designed to accommodate four tubes or bottles up to a maximum length of 230 mm, making it ideal for a range of laboratory applications.This product has a gentle and consistent mixing action, ensuring that blood samples are evenly mixed without causing any damage to the cells. The instrument operates at a fixed speed of 33 rpm, ensuring that the mixing action is consistent and reliable. The roller mixer is also designed to be quiet and vibration-free, ensuring that it does not disrupt other laboratory activities.The roller mixer is designed with a user-friendly interface, with simple controls that allow users to easily adjust the speed and direction of the roller. The instrument also has a compact and lightweight design, making it easy to move and store when, not in use.It is also designed with safety in mind. The roller mixer has a durable and sturdy construction, ensuring that it can withstand heavy use in a laboratory setting. The instrument also features an automatic shut-off system that stops the roller if the lid is opened, preventing accidents and damage to the instrument.Overall, this product is an excellent choice for laboratories and research facilities requiring gentle and consistent mixing of blood samples. With its gentle mixing action, user-friendly interface, safety features, and durable construction, this roller mixer is sure to meet the needs of a variety of laboratory applications.

Add to Cart Buy Now

Ships within 5 days

NSAW Blood Blood Mixer Test Tube Roller NSAW-1495

By NSAW

₹15,339   ₹17,136

You save ₹1,797!

10.49% OFF

NSAW Blood Blood Mixer Test Tube Roller NSAW-1495 is a laboratory instrument that is used to mix blood samples in test tubes. It is a small, compact device that is designed to rotate test tubes at a constant speed, ensuring that the blood samples are thoroughly mixed. The device is commonly used in medical laboratories, hospitals, and research facilities.
The blood mixer test tube roller is a simple device that consists of a motor, a roller, and a base. The motor is responsible for driving the roller, which rotates the test tubes. The base is designed to hold the test tubes securely in place, preventing them from falling off during the mixing process.
The device is easy to use and requires minimal training. To operate the blood mixer test tube roller, the user simply places the test tubes on the roller and turns on the motor. The roller then rotates the test tubes at a constant speed, ensuring that the blood samples are thoroughly mixed.
The blood mixer test tube roller is an essential tool in medical laboratories and hospitals. It is used to mix blood samples for a variety of tests, including blood typing, blood glucose testing, and blood cell counting. The device is also used in research facilities to mix blood samples for experiments and studies.
In addition to its use in the medical field, the blood mixer test tube roller is also used in other industries, such as food and beverage production. It is used to mix ingredients in test tubes, ensuring that they are thoroughly mixed before being added to the final product.
Overall, the blood mixer test tube roller is a simple yet essential laboratory instrument that is used to mix blood samples in test tubes. Its ease of use, reliability, and accuracy make it an indispensable tool in medical laboratories, hospitals, and research facilities.

Add to Cart Buy Now

Ships within 3 days

MAYALAB 4 x 230 mm 30 to 36 rpm Blood Roller Mixer

By MAYALAB

₹3,067   ₹4,004

You save ₹937!

23.39% OFF

The MAYALAB 4 x 230 mm 30 to 36 rpm Blood Roller Mixer is a laboratory device designed for gently and consistently mixing blood samples. It is an essential tool in various medical and scientific settings, including clinical laboratories, research institutions, and blood banks. This particular model stands out due to its specific features and capabilities.
The mixer is equipped with four rollers, each measuring 230 mm in length. These rollers are carefully designed to rotate at a variable speed ranging from 30 to 36 revolutions per minute (rpm). This adjustable speed range allows for optimal mixing and customization according to the specific requirements of different blood samples and applications.
Blood samples often require gentle mixing to ensure proper homogenization without damaging the delicate components. The roller design of this mixer provides a smooth and consistent rocking motion, creating a gentle agitation that prevents the formation of clots and promotes uniform mixing throughout the sample. This is particularly crucial in applications such as blood typing, immunohematology testing, and sample preparation for downstream analysis.
The MAYALAB Blood Roller Mixer is constructed with high-quality materials that meet stringent industry standards. The durable and sturdy construction ensures reliable performance and longevity, even with continuous use in demanding laboratory environments. The rollers are typically covered with a non-slip material to securely hold the tubes or containers, preventing any accidental spills or movements during the mixing process.
The control panel of the mixer is user-friendly, allowing operators to set the desired speed easily. The display panel provides clear information regarding the current speed, allowing for precise monitoring and adjustment if required. Additionally, the mixer is designed to operate quietly, minimizing noise disruption in the laboratory.
Overall, the MAYALAB 4 x 230 mm 30 to 36 rpm Blood Roller Mixer is a versatile and efficient tool for blood sample mixing. Its adjustable speed range, gentle rocking motion, and robust construction make it an ideal choice for laboratories working with blood samples. By ensuring consistent and homogeneous mixing, this mixer contributes to accurate and reliable results in various medical and scientific applications.

Add to Cart Buy Now

Ships within 3 days

Lab Junction 4 x 230 mm Blood Roller Mixer for Laboratories LJ-1445

By Lab Junction

₹6,017  

Lab Junction 4 x 230 mm Blood Roller Mixer for Laboratories LJ-1445 is a laboratory instrument used to mix blood samples in tubes or containers. It provides gentle and consistent mixing of blood samples to ensure thorough and homogeneous mixing of the components. This is important for accurate and reliable results in various blood tests and analyses.
The blood roller mixer consists of a motorized platform with rollers or rotating cylinders. The blood tubes are placed on the rollers, and when the motor is activated, the rollers rotate, causing gentle rolling and tumbling of the tubes. This motion ensures that the blood inside the tubes is evenly distributed, preventing any settling or separation of components.
The purpose of using a blood roller mixer is to achieve proper mixing of anticoagulants and blood components. Many blood tests require the addition of anticoagulants to prevent clotting and ensure the stability of the sample. Proper mixing of the anticoagulant with the blood is crucial to maintain the integrity of the sample and obtain accurate results.
Blood roller mixers offer several advantages over manual methods of mixing blood samples. They provide consistent and reproducible mixing, eliminating the variability that can occur with manual shaking or inversion. The gentle rolling action of the rollers ensures that the blood cells are not damaged or disrupted during the mixing process.
Blood roller mixers are commonly used in clinical laboratories, blood banks, and research facilities. They are essential for various applications, including blood cell counting, coagulation testing, blood typing, and DNA extraction. The accurate and uniform mixing achieved by the roller mixer enhances the reliability and precision of these tests.
Some blood roller mixers come with additional features such as adjustable speed and timers. These features allow users to customize the mixing parameters based on the specific requirements of the test or experiment. Timers can be set to ensure consistent mixing for a specific duration, and adjustable speed settings accommodate different sample volumes or tube sizes.
In summary, a blood roller mixer is a laboratory instrument used to mix blood samples in tubes or containers. It employs a motorized platform with rotating rollers to achieve gentle and consistent mixing. The purpose of the blood roller mixer is to ensure proper mixing of anticoagulants and blood components for accurate and reliable blood tests. Blood roller mixers offer advantages such as consistent mixing, gentle motion, and ease of use. They are widely used in clinical laboratories and research facilities for various blood-related applications.

Add to Cart Buy Now

Ships within 4 days

LABX SOLUTIONS 320 mm x 4 Rods 10 to 30 rpm Blood Roller Mixer LX-BRM

By LABX SOLUTIONS

₹2,800  

LABX SOLUTIONS 320 mm x 4 Rods 10 to 30 rpm Blood Roller Mixer LX-BRM is a laboratory instrument used to gently and consistently mix blood samples or other liquid samples in tubes or containers. It provides a controlled and uniform rotation, ensuring thorough mixing without causing damage to the samples. This device is commonly used in medical laboratories, diagnostic centers, and research facilities.
The blood roller mixer consists of a motor-driven platform with rollers or cylinders attached to it. The tubes or containers holding the samples are placed on these rollers, which rotate slowly and continuously. The rotation creates a gentle and consistent mixing action, allowing the liquid in the tubes to flow smoothly back and forth.
The primary purpose of a blood roller mixer is to ensure homogeneity and prevent clotting of blood samples. By maintaining a consistent and gentle mixing motion, the mixer prevents sedimentation and coagulation of blood cells, ensuring accurate and reliable test results. It is particularly useful for procedures such as blood typing, antibody screening, and cross-matching.
The design of a blood roller mixer allows for flexibility in accommodating different tube sizes and sample volumes. Most models offer adjustable speed settings, allowing users to select the optimal rotation speed for their specific samples. Some mixers also include a programmable timer to automate the mixing process, enabling continuous and unattended operation.
One key advantage of the blood roller mixer is its ease of use. It typically has a user-friendly interface with intuitive controls, making it simple for laboratory personnel to operate. The device is also compact and occupies minimal bench space, making it suitable for laboratories with limited workspace.
In addition to blood samples, a blood roller mixer can be used for mixing other liquid samples, such as urine, serum, plasma, or other biological fluids. It is widely employed in various fields, including clinical diagnostics, hematology, immunology, and research applications.
In summary, the blood roller mixer is an essential laboratory instrument that provides gentle and consistent mixing of blood and other liquid samples. Its controlled rotation prevents clotting, ensures homogeneity, and contributes to accurate and reliable test results. With its user-friendly design and versatility, the blood roller mixer is a valuable tool in the medical and scientific community.

Add to Cart Buy Now

Ships within 3 days

RANDHAWA GLOBAL Blood Roller Mixer 30-36 RPM for Laboratories, RG-4409

By RANDHAWA GLOBAL

₹3,569   ₹4,448

You save ₹879!

19.77% OFF

RANDHAWA GLOBAL Blood Roller Mixer 30-36 RPM for Laboratories, RG-4409 is a laboratory device used to gently and consistently mix blood samples, as well as other biological and chemical samples, in a controlled and efficient manner. It is a valuable tool in medical diagnostics, research, and clinical laboratories, ensuring the thorough mixing of blood and other samples without causing damage to the cells or compromising the integrity of the specimen.
Key features and components of a blood roller mixer include:
Roller Mechanism: The core component of a blood roller mixer is a set of rotating rollers or rollers on a platform. These rollers provide a gentle rocking or rolling motion to the tubes or containers holding the blood samples. The rolling action effectively mixes the contents by slowly and continuously agitating the samples.
Variable Speed Control: Most blood roller mixers offer variable speed settings, allowing users to adjust the intensity of the mixing. Different samples may require different mixing speeds to achieve optimal results while preserving sample integrity.
Tube Holders: Blood roller mixers are designed to accommodate a variety of tube sizes, including test tubes, blood collection tubes, and culture tubes. The tube holders secure the tubes in place during the mixing process.
Timer Function: Many models come equipped with a timer, which enables users to set specific mixing durations. This feature is particularly useful when standardizing sample preparation protocols.
Compact Design: Blood roller mixers are typically compact and take up minimal bench space in the laboratory.
Applications of blood roller mixers in the laboratory setting include:
Blood Sample Mixing: Blood roller mixers are used to homogenize blood samples, preventing clotting and ensuring an even distribution of additives and anticoagulants. This is critical for accurate blood testing, such as complete blood counts (CBC) and coagulation studies.
Cell Culture: In cell culture laboratories, blood roller mixers are employed to maintain the suspension of cells in culture tubes or flasks. The gentle mixing helps prevent cell settling and maintains cell viability.
Biochemistry and Molecular Biology: Blood roller mixers are used in various biochemical and molecular biology applications, such as DNA and RNA extraction, enzyme assays, and protein studies, where precise and gentle mixing is required.
Clinical Diagnostics: Clinical laboratories use blood roller mixers for preparing patient samples for various diagnostic tests, ensuring that the samples are well-mixed and representative of the patient's condition.
In summary, a blood roller mixer is a laboratory instrument that provides controlled and gentle mixing of blood samples and other biological or chemical samples. It is essential for maintaining sample integrity, preventing clotting, and ensuring accurate test results in medical diagnostics, research, and clinical laboratories.

Add to Cart Buy Now

Ships within 3 days

NS 230 mm 30 RPM Blood Mixer Roller, I0-OLA8-A6F6

By NS

₹2,831   ₹4,999

You save ₹2,168!

43.37% OFF

The NS 4 x 230mm 30 rpm Blood Mixer Roller I0-OLA8-A6F6 is a specialized laboratory instrument designed for gentle and effective mixing of blood samples and other liquids in clinical and research settings. This roller mixer facilitates uniform mixing without causing shear stress or damaging delicate samples, making it ideal for applications in hematology, serology, immunology, and other biomedical fields. Key features of the NS Blood Mixer Roller include four rollers, each measuring 230mm in length, which provide a generous mixing surface for accommodating multiple tubes simultaneously. The rollers rotate at a fixed speed of 30 revolutions per minute (rpm), ensuring consistent and gentle agitation of samples placed on them. This controlled mixing speed prevents excessive agitation that could alter sample integrity, ensuring accurate test results and reliable data. Constructed from durable materials, the mixer is robust and built to withstand continuous use in busy laboratory environments. Its compact design allows it to be placed on laboratory benches without occupying excessive space, optimizing workspace efficiency. The NS Blood Mixer Roller I0-OLA8-A6F6 is user-friendly, featuring intuitive controls that allow for easy operation. It is suitable for mixing various tube sizes commonly used in clinical and research laboratories, enhancing its versatility and usability. Safety features include a stable base and secure rollers that prevent tubes from dislodging during operation, ensuring stable mixing without the risk of spills or accidents. In summary, the NS 4 x 230mm 30 rpm Blood Mixer Roller I0-OLA8-A6F6 combines reliability, efficiency, and gentle mixing action to meet the stringent requirements of laboratory professionals in biomedical research and clinical diagnostics. Its robust construction, user-friendly design, and precise mixing capabilities make it an essential tool for achieving consistent and accurate results in laboratory settings.

Add to Cart Buy Now

Ships within 3 days

NS Blood Roller Machine with 4 Rollers of 230 mm Length

By NS

₹2,595 - ₹2,831

You save ₹3,404!

56.74% OFF

The NS Blood Roller Machine with 4 rollers, each 230 mm in length, is a specialized apparatus crucial in laboratory settings for the gentle and effective mixing of blood samples and other biological fluids. Designed with precision and reliability in mind, this machine employs a gentle rolling action to ensure thorough yet gentle agitation of tubes or containers holding blood or other biological specimens. Its construction typically features durable materials and a robust motor system that facilitates consistent and reliable operation. The four rollers, each measuring 230 mm in length, provide ample surface area for accommodating multiple tubes or containers simultaneously, enhancing efficiency in laboratory workflows. The machine's design emphasizes user convenience and safety, often incorporating features such as adjustable roller speed settings and a stable base to prevent vibrations or movement during operation. This ensures precise control over mixing parameters while maintaining sample integrity. Ideal for applications in hematology, serology, and other biochemical analyses, the blood roller machine plays a critical role in preparing samples for testing, ensuring uniform mixing of reagents and specimens without introducing air bubbles or causing hemolysis. In summary, the NS Blood Roller Machine with 4 rollers combines durability, precision mixing capabilities, and user-friendly features to support accurate laboratory procedures, making it an essential tool for laboratories focused on high-quality biological sample handling and analysis.

Type of Product : Blood Roller Machine

Weight : 3 Kg

Capacity : 5 ml x 15 Nos

Speed : 30 /36 RPM

Mixing Time : 15 to 20 Minutes

Size : Roller: 4 Nos. x 230 mm

Application Area : Laboratories

Input Voltage : 230 V AC, 50 Hz

Explore other Variants (2)

Ships within 3 days

MESWOX 230 mm 30/36 RPM 4 Rollers Blood Mixer, MBR-4

By MESWOX

₹2,700  

The MESWOX 230 mm Blood Mixer, model MBR-4, is a versatile and efficient tool designed for thorough mixing of blood and other liquid samples. With its 30/36 RPM speed options and four rollers, this mixer ensures gentle and uniform mixing, preventing sample clotting and maintaining sample integrity. The 230 mm width provides ample space for various tube sizes, making it suitable for a wide range of laboratory applications.Engineered for reliability and ease of use, the MESWOX MBR-4 features a sturdy construction and smooth operation, making it a valuable addition to any clinical or research laboratory. Its adjustable speed settings and consistent mixing performance make it ideal for blood samples, cell suspensions, and other sensitive liquids. Choose the MESWOX MBR-4 for effective and reliable sample mixing.

Add to Cart Buy Now

Ships within 3 days

MAURYA SCIENTIFIC 30 RPM Blood Mixer Roller Mixer Spin 4 x 230 mm Rollers for Mixing Tube

By MAURYA SCIENTIFIC

₹2,949  

The MAURYA SCIENTIFIC 30 RPM Blood Mixer Roller Mixer is a reliable and efficient tool designed for mixing blood samples and other liquids in laboratory settings. Featuring four 230 mm rollers, this mixer provides consistent and gentle mixing, ensuring thorough homogenization of samples without causing damage to the contents. The steady 30 RPM speed is optimal for mixing tubes, making it ideal for blood samples, cell cultures, and other sensitive applications. Constructed with a robust design, this roller mixer ensures stability during operation, minimizing any risk of spillage. Its compact size allows for easy integration into any lab setup, while the user-friendly controls make it simple to operate. The MAURYA SCIENTIFIC Blood Mixer Roller Mixer is an essential device for healthcare professionals and researchers who require accurate and consistent sample mixing, contributing to improved results in diagnostics and scientific studies.

Add to Cart Buy Now

Ships within 3 days

Labtronics 1-99 RPM Speed and 12 W Power Rotating Mixer With Adjustable Rotation Speed, LT-45

By Labtronics

₹36,749   ₹37,800

You save ₹1,051!

2.78% OFF

Introducing the Labtronics 1-99 RPM Speed and 12 W Power Rotating Mixer With Adjustable Rotation Speed, LT-45, a versatile tool designed for precise mixing in laboratory settings. This rotating mixer features an adjustable speed range of 1-99 RPM, allowing users to tailor mixing conditions to their specific applications. With a robust power output of 12 W, it efficiently handles a variety of samples, accommodating tube capacities from 1.5 to 50 ml. The digital display provides easy monitoring of speed settings, while the timer function supports durations from 1 to 9999 minutes, ensuring flexibility for both short and long mixing tasks.
The Labtronics LT-45 is ideal for laboratories requiring a reliable and efficient mixing solution. Its ten different self-contained programs facilitate quick setup and consistent results, making it perfect for routine analysis or experimental procedures. Designed for ease of use and durability, this rotating mixer combines functionality with an intuitive interface, enhancing your laboratory's productivity. Elevate your mixing capabilities with the Labtronics LT-45 today!

Add to Cart Buy Now

Ships within 5 days

LABIX Rotary Blood Mixer AC, LBX-602

By LABIX

₹24,779   ₹28,800

You save ₹4,021!

13.96% OFF

The LABIX Rotary Blood Mixer AC, LBX-602 by LABIX leads the way in the Laboratory Analyzers & Equipment category, engineered to deliver high-precision diagnostics and streamlined laboratory workflows. Equipped with features such as Rotary Blood Mixer AC, LBX-602, it supports reliable testing and consistent results in a wide range of clinical and research environments..Crafted by LABIX, LABIX Rotary Blood Mixer AC, LBX-602 is built with advanced technology and user-centric design. The integration of Rotary Blood Mixer AC, LBX-602 enhances accuracy and efficiency, making it a trusted tool for modern labs. Optimize your lab operations with this essential Laboratory Analyzers & Equipment solution.

Add to Cart Buy Now

Ships within 3 days

GENERIC Blood Roller Mixer For Doctor Use, PKWEK-99

By GENERIC

₹3,421  

The GENERIC Blood Roller Mixer For Doctor Use, PKWEK-99 is a compact and efficient device designed for thorough mixing of blood samples and other biological fluids in clinical and diagnostic laboratories. With its gentle rocking and rolling motion, it ensures homogenous mixing without damaging delicate blood cells, making it ideal for anticoagulated blood, viscous samples, and similar applications. The unit supports consistent rotation to maintain uniformity, ensuring accurate test results and sample integrity. Built with a sturdy structure and smooth rollers, the GENERIC Blood Roller Mixer For Doctor Use, PKWEK-99 is easy to operate and maintain. Its compact footprint fits conveniently on lab benches, and its quiet operation is suitable for continuous use in professional environments. As a key asset in the Laboratory Equipment category, this roller mixer is perfect for doctors, pathologists, and lab technicians who require reliable performance in everyday diagnostic tasks.

Add to Cart Buy Now

Ships within 3 days

Labline Rotary Mixer ABS and Metal Body 15 RPM Speed and 38° Fix Tilting Motion, RM 11

By Labline

₹8,731  

Labline Rotary Mixer ABS and Metal Body 15 RPM Speed and 38° Fix Tilting Motion, RM 11 is designed for gentle and uniform mixing of samples. The fixed 38-degree tilting motion combined with a steady 15 RPM speed ensures consistent blending without foaming or sample degradation. Its ABS and metal body construction provides durability and stability during operation. Labline Rotary Mixer ABS and Metal Body 15 RPM Speed and 38° Fix Tilting Motion, RM 11 is suitable for mixing blood samples, reagents, and suspensions in diagnostic and research laboratories. The smooth and quiet operation supports continuous use, while its compact footprint makes it ideal for routine laboratory workflows.

Add to Cart Buy Now

Ships within 3 days

Labline Blood Roller Mixer 4 Nos. x 230 mm LG Size, 15 to 20 Minutes Mixing Time and 30 RPM Speed, BM 11

By Labline

₹7,551  

Labline Blood Roller Mixer 4 Nos. x 230 mm LG Size, 15 to 20 Minutes Mixing Time and 30 RPM Speed, BM 11 is designed for uniform and gentle mixing of blood samples used in clinical, pathological, and research laboratories. The four-roller configuration with 230 mm long rollers ensures consistent rolling action, preventing clot formation while maintaining sample integrity. Operating at a stable 30 RPM speed, the mixer provides controlled agitation suitable for blood collection tubes and similar containers. The recommended mixing duration of 15 to 20 minutes supports effective homogenization without damaging sensitive components. Labline Blood Roller Mixer 4 Nos. x 230 mm LG Size, 15 to 20 Minutes Mixing Time and 30 RPM Speed, BM 11 features a compact and durable construction that allows reliable operation during routine diagnostic workflows. Its smooth roller motion reduces vibration and noise, contributing to a comfortable laboratory environment. The unit is easy to operate and maintain, making it suitable for blood banks, hospitals, and diagnostic centers where repeatable mixing performance is essential for accurate test results.

Add to Cart Buy Now

Ships within 6 days

Abdos Wavex- Rotating Mixer Accessories for Centrifuge Tubes

By Abdos

₹21,239 - ₹23,599

The Abdos Wavex- Rotating Mixer Spare Accessories for Centrifuge Tubes are essential components designed to enhance the versatility and functionality of your Abdos Wavex- Rotating Mixer E11280. These high-quality accessories are specifically tailored for use with both horizontal and vertical centrifuge tubes, ensuring optimal performance and adaptability for a wide range of laboratory applications. Whether you are working in molecular biology, biochemistry, or clinical diagnostics, these spare accessories provide the reliability and precision needed for efficient sample processing. The horizontal centrifuge tube holders are engineered to securely accommodate tubes in a horizontal orientation, allowing for consistent and even mixing. This configuration is ideal for applications that require gentle agitation and thorough mixing of samples, such as in the preparation of suspensions or homogenizing solutions. The secure fit ensures that the tubes remain in place during operation, preventing spills and ensuring the integrity of your samples. The vertical centrifuge tube holders, on the other hand, are designed to hold tubes in a vertical orientation, which is particularly useful for applications requiring more vigorous mixing. This setup is perfect for tasks such as resuspending pellets or mixing viscous samples, providing robust and effective agitation. The vertical holders are built to withstand the dynamic motion of the rotating mixer, ensuring that your tubes are held firmly in place. Both types of tube holders are made from durable, high-quality materials that are easy to clean and maintain, ensuring long-lasting performance. They are designed for easy installation and removal, allowing for quick transitions between different mixing tasks. By incorporating these spare accessories into your Abdos Wavex- Rotating Mixer E11280, you can significantly enhance the efficiency and flexibility of your laboratory workflows.

Type of Product : Spare Accessory

Country of Origin : India

Compatible Device : Wavex- Rotating Mixer

Explore other Variants (6)

Ships within 6 days

Abdos E11280 Speed Range 0-70 rpm Rotating Mixer

By Abdos

₹1,53,399  

Voltage-220-240V
Frequency-50Hz
Power-40
Motor Type-DC Motor
Tilt Angle-0 - 90°
Speed & Timer Display - LCD
Time Setting Range - 1- 199
Operation Type-Continuous / timed
Dimension - 220 x 510 x 260 mm
Weight - 8 Kg
Permissible ambient Temperature - 5-45° C
Permissible ambient Humidity - 80%

Add to Cart Buy Now

Ships within 6 days

Abdos E11274 Disk Support Rods Used With Disk Accessories

By Abdos

Pack of 4 piece

₹5,899  

Disk Support Rods Used With Disk Accessories

Add to Cart Buy Now

Ships within 6 days

WKM 4 Tubesx230 mm Length 30 to 36 rpm Blood Roller Mixer for Medical Labs KTN86

By WKM

₹3,185   ₹6,999

You save ₹3,814!

54.49% OFF

WKM 4 Tubes x 230 mm Length 30 to 36 rpm Blood Roller Mixer for Medical Labs KTN86 is a vital laboratory device designed to gently and consistently mix blood samples, tubes, or vials. It plays a crucial role in various medical and research applications where proper and uniform mixing of blood is essential. The device utilizes a rolling or rocking motion to ensure thorough blending without causing damage to the blood cells or compromising the integrity of the sample.
The main features and benefits of a Blood Roller Mixer include:
Gentle Mixing: The roller mixer uses a slow and smooth rolling action, preventing the formation of air bubbles and minimizing the risk of hemolysis (rupture of red blood cells). This ensures accurate and reliable test results in various clinical analyses, including blood cell counting, coagulation studies, and immunoassays.
Consistency: The mixer provides uniform mixing throughout the sample, regardless of the volume or viscosity of the blood. This consistency is essential for obtaining reliable and reproducible results, especially in time-sensitive tests and longitudinal studies.
Time-Saving: By automating the mixing process, the blood roller mixer saves valuable time for laboratory staff, enabling them to focus on other important tasks and increasing overall lab productivity.
Versatility: Blood roller mixers can accommodate multiple blood sample tubes or vials of various sizes, allowing simultaneous mixing of several samples. Some models may also have adjustable speed settings to cater to different sample types.
User-Friendly Design: These mixers are typically easy to use, with straightforward controls and ergonomic features. They often have a compact footprint, making them suitable for laboratories with limited space.
Stability and Durability: Blood roller mixers are constructed from robust materials, ensuring stability during operation and prolonged durability under regular laboratory use.
Contamination Prevention: The mixer's enclosed design minimizes the risk of sample contamination and provides a controlled environment for handling potentially infectious samples.
In conclusion, the Blood Roller Mixer is a crucial tool in clinical laboratories and research facilities that deal with blood samples. Its gentle and consistent mixing action ensures accurate and reliable test results while saving time and effort for laboratory staff. By promoting efficiency, reliability, and safety in blood sample handling, this device significantly contributes to the overall quality of medical diagnostics, research, and patient care.

Add to Cart Buy Now

Ships within 6 days

Labtronics Table Top Blood Roller Mixer with 4 Rollers Size 230 mm, LT-43

By Labtronics

₹6,844  

The Labtronics Table Top Blood Roller Mixer with 4 Rollers, size 230 mm, model LT-43, is an essential laboratory instrument designed for the gentle and consistent mixing of blood samples, cultures, and other biological fluids. This tabletop device is particularly suited for applications in clinical laboratories, research institutions, and medical facilities where precise and controlled mixing is critical.
The primary feature of the LT-43 is its four rollers, each with a size of 230 mm. These rollers are responsible for creating a gentle and continuous rocking motion, ensuring thorough and homogeneous mixing of samples contained in tubes or bottles placed on the mixing platform. The size of the rollers allows for accommodating a variety of tube sizes, making the apparatus versatile for different laboratory applications.
The tabletop design of the mixer enhances its practicality and usability in a laboratory setting. It offers stability and ease of access, allowing users to conveniently load and unload samples without taking up excessive space. This makes the LT-43 suitable for laboratories with limited bench space or those requiring multiple units for parallel processing.
The blood roller mixer is engineered to operate quietly, minimizing disturbances in the laboratory environment. This is especially important in settings where concentration and focus are crucial, such as during sensitive experiments or diagnostic procedures.
The LT-43 likely features user-friendly controls, allowing operators to adjust the speed of the mixing motion according to the specific requirements of their samples. Variable speed settings enable customization to accommodate different viscosity levels and ensure optimal mixing conditions.
In summary, the Labtronics Table Top Blood Roller Mixer with 4 Rollers, size 230 mm (LT-43), is a reliable and versatile laboratory instrument. With its four rollers, tabletop design, and adjustable speed settings, it provides a practical solution for researchers and clinicians who require consistent and gentle mixing of blood samples and other biological fluids in their daily laboratory work.

Add to Cart Buy Now

Ships within 6 days

Labtronics Rotary Blood Mixer AC Suitable For 1.5-50 ml Centrifugal Tube, LT-44

By Labtronics

₹22,049  

The Labtronics LT-44 Rotary Blood Mixer AC is a high-performance, durable mixer designed specifically for handling 1.5 to 50 ml centrifugal tubes. With its fixed 45° angle and synchronous motor, it ensures reliable and uniform mixing of blood samples and other liquid substances. Ideal for laboratory environments, this blood mixer operates at a stable 30 RPM, with an accuracy of ±2 RPM, making it highly effective for thorough mixing without the risk of sample degradation.
This compact and lightweight Labtronics LT-44 Rotary Blood Mixer AC is built for consistent performance and ease of use. With a power consumption of just 6W and a 220V AC power supply, it is both energy-efficient and reliable. Its sleek design and operational weight of 1.5 kg make it suitable for a range of laboratory applications. Designed for seamless operation, this rotary mixer is perfect for labs requiring precision and versatility in their mixing processes.

Add to Cart Buy Now

Ships within 6 days

BR Biochem 4 W Power 10-40 RPM Three Dimension Rotating Mixer, RH-18+

By BR Biochem

₹56,639  

Introducing the BR Biochem RH-18+ Three Dimension Rotating Mixer, a powerful and versatile laboratory mixer designed to deliver exceptional mixing performance for a variety of applications. Operating at a power output of 4 watts and a speed range of 10 to 40 RPM, this mixer is ideal for thorough mixing of samples without compromising their integrity. The RH-18+ features a unique three-dimensional rotating mechanism, which provides a gentle yet effective mixing action, ensuring homogeneous results. This innovative design allows for consistent blending of liquids, powders, and gels, making it an essential tool for research and development in various scientific fields, including biochemistry, microbiology, and molecular biology. Equipped with an easy-to-use control panel, the mixer allows users to set the desired speed effortlessly, providing the flexibility needed for different mixing tasks. Its compact and lightweight design makes it easy to integrate into any laboratory setup, while its durable construction ensures long-lasting performance. The BR Biochem RH-18+ is perfect for applications that require delicate handling of samples, such as cell cultures, reagents, and sensitive biological materials. The rotating motion minimizes shear stress, preserving the integrity of your samples while achieving optimal mixing efficiency.

Add to Cart Buy Now

Ships within 6 days

Abdos 20 W Power and 0-80 RPM Speed Range Wavex Classic Tube Rotator

By Abdos

₹62,539 - ₹66,079

The Abdos 20 W Power and 0-80 RPM Speed Range Wavex Classic Tube Rotator is a versatile and efficient laboratory device designed for gentle and continuous rotation of tubes, vials, and bottles. With a 20 W power output, it provides consistent rotation at adjustable speeds ranging from 0 to 80 RPM, allowing for precise control over the mixing process. This rotator is ideal for applications in molecular biology, chemistry, and clinical research, where gentle yet effective mixing of samples is essential. The low-speed range ensures that sensitive samples are handled without agitation-induced damage, making it suitable for applications like cell culture, protein assays, and blood sample processing. Its compact and durable design ensures reliable performance in a variety of laboratory environments. The easy-to-use digital controls allow users to set the speed and time, providing convenience and accuracy in everyday laboratory workflows. The Abdos Wavex Classic Tube Rotator is an essential tool for precise and efficient sample mixing.

Speed Range : 0-80 RPM

Country of Origin : India

Voltage : 220-240 V

Frequency : 50-60 Hz

Packaging Type : Case

Relative Humidity : Permissible: 80%

Name of Manufacturer/Packer/Importer : ABDOS LABTECH PRIVATE LIMITED

Motor Type : DC Motor

Power : 20 W

Angle : Tilt: 90°

IP Rating : IP21

Ambient Temperature : Permissible: 5 – 40°C

No. Per Case : 1

Series : Wavex

Operation Type : Continuous

Speed Display : Scale

Explore other Variants (2)

Ships within 6 days

Abdos 4.5 mm Orbit Diameter and 0-1500 RPM Speed Range Swirlex Micro Plate Mixer, E11200

By Abdos

₹66,079  

Introducing the Abdos 4.5 mm Orbit Diameter and 0-1500 RPM Speed Range Swirlex Micro Plate Mixer, E11200—an essential tool designed for precise mixing of single or double micro plates with an SBS footprint. This versatile rotary mixer is widely utilized in life sciences, including microbiology, cell and molecular biology, immunology, and biotechnology, facilitating a variety of mixing applications with the option of customizable adapters to meet your specific needs.
The Abdos 4.5 mm Orbit Diameter and 0-1500 RPM Speed Range Swirlex Micro Plate Mixer, E11200 combines high-speed performance with a small orbit diameter, delivering true vortexing action in every well of the micro plate. This innovative design guarantees complete and uniform mixing, essential for reliable experimental results. With its user-friendly operation and robust construction, this micro plate mixer is perfect for enhancing laboratory efficiency. Choose Abdos for superior quality and performance in your laboratory mixing solutions, and elevate your research capabilities today.

Add to Cart Buy Now

Ships within 6 days

REMI Tube Roller Mixer with Brushless Motor, 20-80 rpm Speed and 6 Rollers of Size 34x280 mm, Seroroll 6 Plus

By Remi

₹33,040  

REMI Tube Roller Mixer with Brushless Motor, 20-80 rpm Speed and 6 Rollers of Size 34x280 mm, Seroroll 6 Plus is designed for gentle and uniform mixing of samples in tubes and bottles. The brushless motor ensures smooth, maintenance-free operation with minimal noise, making it suitable for continuous laboratory use in clinical and research environments. REMI Tube Roller Mixer with Brushless Motor, 20-80 rpm Speed and 6 Rollers of Size 34x280 mm, Seroroll 6 Plus provides adjustable speed control for handling different sample viscosities. Its six-roller configuration ensures consistent rotation and mixing, making it ideal for applications such as blood sample mixing, cell culture preparation, and biochemical testing.

Add to Cart Buy Now

Ships within 6 days

BR Biochem Roller Mixer 14x50 ml Centrifuge Tube/700 g Maximum Capacity and 20-80 RPM Speed Range, BR-RM-80R

By BR Biochem

₹51,919  

BR Biochem Roller Mixer 14x50 ml Centrifuge Tube/700 g Maximum Capacity and 20-80 RPM Speed Range, BR-RM-80R is designed for gentle and uniform mixing of samples in laboratory environments. Its adjustable speed range ensures precise control for different applications, while the capacity to handle multiple tubes enhances productivity. The smooth rolling motion provides consistent mixing without damaging sensitive samples. BR Biochem Roller Mixer 14x50 ml Centrifuge Tube/700 g Maximum Capacity and 20-80 RPM Speed Range, BR-RM-80R features a compact and durable design, making it suitable for continuous operation. The user-friendly controls allow easy adjustment of speed settings, ensuring flexibility for various laboratory tasks. Ideal for research, clinical, and biotechnology applications, it delivers reliable performance for sample preparation and mixing processes.

Add to Cart Buy Now

Ships within 6 days

WKM Blood Roller Mixer 4 x 230 mm Size 30 RPM Speed for Uniform Mixing of Blood Samples and Fluids, ‎BLOOD-ROLLER4

By WKM

₹2,831  

WKM Blood Roller Mixer 4 x 230 mm Size 30 RPM Speed for Uniform Mixing of Blood Samples and Fluids, ‎BLOOD-ROLLER4 is a precision laboratory device designed for gentle and uniform mixing of blood samples and biological fluids. Operating at a stable 30 RPM speed, it ensures consistent sample rotation without hemolysis, making it ideal for clinical laboratories, diagnostic centers, and research applications requiring accurate specimen preparation. WKM Blood Roller Mixer 4 x 230 mm Size 30 RPM Speed for Uniform Mixing of Blood Samples and Fluids, ‎BLOOD-ROLLER4 features 4 rollers with 230 mm length and supports efficient mixing cycles of 15–20 minutes. With robust 230 V AC input and 3.95 kg build, it provides stable performance in demanding lab environments. Designed under the trusted WKM brand, it ensures reliable, smooth, and uniform mixing for professional laboratory workflows.

Add to Cart Buy Now

Ships within 15 days

LABIX Rotating Mixer with Adjustable Rotating Speed, LBX-601

By LABIX

₹54,279   ₹64,800

You save ₹10,521!

16.24% OFF

The LABIX Rotating Mixer with Adjustable Rotating Speed, LBX-601 by LABIX leads the way in the Laboratory Analyzers & Equipment category, engineered to deliver high-precision diagnostics and streamlined laboratory workflows. Equipped with features such as Rotating Mixer with Adjustable Rotating Speed, LBX-601, it supports reliable testing and consistent results in a wide range of clinical and research environments..Crafted by LABIX, LABIX Rotating Mixer with Adjustable Rotating Speed, LBX-601 is built with advanced technology and user-centric design. The integration of Rotating Mixer with Adjustable Rotating Speed, LBX-601 enhances accuracy and efficiency, making it a trusted tool for modern labs. Optimize your lab operations with this essential Laboratory Analyzers & Equipment solution.

Add to Cart Buy Now

Ships within 15 days

GALAXY 12 W Roller Mixer with Digital Display in White and Black Color, GRM-6

By GALAXY

₹24,190  

The GALAXY 12 W Roller Mixer with Digital Display in White and Black Color, GRM-6 is designed for efficient and uniform mixing of liquid samples in laboratories, research facilities, and clinical environments. Powered by a 12 W motor, this roller mixer provides smooth and consistent rotation that ensures gentle yet effective mixing of samples in tubes and small containers. Its stable rolling mechanism helps maintain homogeneous solutions without causing excessive agitation, making it suitable for blood samples, chemical solutions, and biological preparations used in routine laboratory procedures. Built with a modern white and black exterior, the GALAXY 12 W Roller Mixer with Digital Display in White and Black Color, GRM-6 combines durability with user-friendly operation. The integrated digital display allows easy monitoring and control of mixing parameters, enabling accurate adjustments for different laboratory requirements. Its compact and space-saving design fits conveniently on laboratory benches while providing reliable performance for continuous mixing tasks. Ideal for laboratories, hospitals, and research institutes, this roller mixer supports consistent sample preparation and helps improve workflow efficiency during testing and analytical processes.

Add to Cart Buy Now

Ships within 30 days

Tarson PP Autoclavable Rotospin Rotary Mixer Bar for Labs

By Tarson

₹9,439 - ₹11,681

The Tarson PP Autoclavable Rotospin Rotary Mixer with Rotating Bar is a laboratory instrument designed for gentle mixing or agitation of samples in various vessels or containers. Here are its key features: Material: Constructed from polypropylene (PP), the mixer is autoclavable, ensuring sterilization of the equipment before use and preventing contamination of samples. Rotating Bar: The mixer features a rotating bar mechanism that provides gentle mixing or agitation of samples. The rotating bar design allows for efficient mixing without causing excessive shear or damage to sensitive samples. Versatile Design: The mixer can accommodate various vessels, including tubes, microplates, and bottles, making it suitable for a wide range of laboratory applications. Adjustable Speed: The mixer may offer adjustable speed settings, allowing users to control the mixing intensity based on the specific requirements of their samples and applications. Compact Size: The mixer has a compact footprint, making it suitable for use in laboratories with limited bench space. Despite its small size, it offers efficient mixing performance. User-Friendly Controls: The mixer is equipped with user-friendly controls, allowing for easy adjustment of speed and operation. This ensures convenience and flexibility during experimental procedures. Durable Construction: Built from high-quality materials, the mixer is designed to withstand continuous use in demanding laboratory environments. Its robust construction ensures long-term reliability and performance. Quiet Operation: The mixer operates quietly, providing a quiet working environment in the laboratory. Safety Features: The mixer may include safety features such as overload protection and non-slip feet, ensuring safe and stable operation during use. Overall, the Tarson PP Autoclavable Rotospin Rotary Mixer with Rotating Bar is a reliable and efficient laboratory instrument for gentle mixing and agitation of samples. Its autoclavable PP construction, versatile design, adjustable speed settings, compact size, user-friendly controls, durable construction, quiet operation, and safety features make it a valuable tool in various laboratory applications.

Type : Rotary Mixer Bar

Explore other Variants (3)

Ships within 30 days

Tarson 3090X Speed Range 5-50RPM Rotospin Rotary Mixer

By Tarson

₹68,327  

Provides Serial Rotation Of Tubes For Extraction, Diffusion etc.
Rotating Bars For Tube Dia From 10-30 mm.
Plastic Coated Spring Clips Quick, Easy Coupling For Exchange Of Rotating Bars.

Add to Cart Buy Now

Ships within 19 days

AS ONE Mix Rotor Variable, 1-1186-12

By AS ONE

₹1,76,999  

AS ONE Mix Rotor Variable, 1-1186-12.The Mix Rotor Variable is a laboratory accessory designed for versatile sample mixing and agitation in scientific, research, and industrial settings. This rotor is recognized for its exceptional quality, adaptability, and compatibility with various laboratory instruments, making it an essential tool for laboratories requiring efficient and reliable sample mixing. Key features of the Mix Rotor Variable typically include: Compatibility: The Mix Rotor Variable is designed to fit into various laboratory instruments, such as centrifuges, providing them with mixing capabilities. This compatibility allows users to perform a wide range of sample preparation and processing tasks Sample Holding Capacity: The rotor typically features multiple slots or positions for holding sample containers, such as tubes, vials, or microplates. This enables simultaneous mixing of multiple samples, improving efficiency Variable Speed: The rotor offers variable speed settings, allowing users to adjust the mixing intensity and speed to suit the specific requirements of their applications. This flexibility is crucial for optimizing mixing conditions Direction Control: Some models of Mix Rotor Variable offer bidirectional mixing, allowing samples to be mixed in both clockwise and counterclockwise directions. This feature enhances mixing uniformity and sample homogeneity User-Friendly Interface: The rotor often includes a user-friendly control interface that enables easy adjustment of mixing parameters, including speed and time Safety Features: Safety is a priority, and these rotors may include features like imbalance detection and automatic shutoff to prevent accidents and protect the samples and the instrument. Whether used in molecular biology, clinical diagnostics, or chemistry, the Mix Rotor Variable is a valuable accessory for professionals and researchers requiring efficient and precise sample mixing. Its quality construction, versatility, and compatibility contribute to its utility in optimizing laboratory workflows and ensuring consistent and reliable results in various scientific and research applications.

Add to Cart Buy Now

Ships within 19 days

AS ONE Mix Rotor Variable, 1-1186-11

By AS ONE

₹1,88,799  

AS ONE Mix Rotor Variable, 1-1186-11.The Mix Rotor Variable is a laboratory accessory designed for versatile sample mixing and agitation in scientific, research, and industrial settings. This rotor is recognized for its exceptional quality, adaptability, and compatibility with various laboratory instruments, making it an essential tool for laboratories requiring efficient and reliable sample mixing. Key features of the Mix Rotor Variable typically include: Compatibility: The Mix Rotor Variable is designed to fit into various laboratory instruments, such as centrifuges, providing them with mixing capabilities. This compatibility allows users to perform a wide range of sample preparation and processing tasks Sample Holding Capacity: The rotor typically features multiple slots or positions for holding sample containers, such as tubes, vials, or microplates. This enables simultaneous mixing of multiple samples, improving efficiency Variable Speed: The rotor offers variable speed settings, allowing users to adjust the mixing intensity and speed to suit the specific requirements of their applications. This flexibility is crucial for optimizing mixing conditions Direction Control: Some models of Mix Rotor Variable offer bidirectional mixing, allowing samples to be mixed in both clockwise and counterclockwise directions. This feature enhances mixing uniformity and sample homogeneity User-Friendly Interface: The rotor often includes a user-friendly control interface that enables easy adjustment of mixing parameters, including speed and time Safety Features: Safety is a priority, and these rotors may include features like imbalance detection and automatic shutoff to prevent accidents and protect the samples and the instrument. Whether used in molecular biology, clinical diagnostics, or chemistry, the Mix Rotor Variable is a valuable accessory for professionals and researchers requiring efficient and precise sample mixing. Its quality construction, versatility, and compatibility contribute to its utility in optimizing laboratory workflows and ensuring consistent and reliable results in various scientific and research applications.

Add to Cart Buy Now

Ships within 19 days

Esco Mixer BS.CS-IF：1032 to 3224, HF.VHF.UHF：10 to 770 MHz Frequency Band, EA940P-13A

By Esco

₹6,843  

Add to Cart Buy Now

Previous Next

Page 1 of 1 results