• Home /
• Pumps /
• 2hp submersible pump

Have a question? Call us now at +91 9650660070

2hp submersible pump

Showing 40 out of 522 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 5 days

Rupcon 2 HP Borewell Submersible Pump RP5215

1

By Rupcon

₹17,699   ₹24,100

You save ₹6,401!

26.56% OFF

Rupcon Submersible Pump is the best in class Borewell Submersible Pump available in the market. The Rupcon Submersible Water Pump Price is lowest in market without compromising on the quality. Features: Hydraulic compact and high efficient design saves electricity by 20% to 40% in compare to old conventional designed pumps Hydraulic, highly efficient design of Pump bowls. Engineering Glass filled Plastic Bowl set with both side of S.S. Neck Rings. Impeller and diffusers are of special engineering plastic and increases the wear resistance towards sand. AISI 410 S.S. Sleeves are reinforced with chromium for proven wear resistance Special LTB-4 and Nitrile Rubber Bush for proven anti-wear resistance Pure AISI 410 S.S. Grade Pump Shaft Max. Sand quantity into the water: 50 g/m Applications A combination of multistage centrifugal pumps and submersible motors, the 4 borehole submersible pump, is designed for applications like: Domestic water supply. Water supply to high rise buildings. Housing complexes, bungalows. Gardens, farms and nurseries. Max. Discharge : 800 LPM. Max. Head / Stage: 7 Meters Max voltage fluctuation: +15% -20%; -Max Operating Voltage: 160 240 Volt (I Phase) Max. Start/Hour: 20 Max. Temp. of Liquid: 40 C

Add to Cart Buy Now

Ships within 3 days

Tesmo Single Phase Openwell Submersible Pump (Power: 0.5 - 2 HP)

By Tesmo

₹7,433 - ₹16,519

The Tesmo Single Phase Openwell Submersible Pump is a durable and efficient pumping solution designed for domestic, agricultural, and small-scale water supply applications. Built to operate while fully submerged, it is ideal for open wells, sumps, and water tanks, ensuring smooth and reliable water lifting. The single-phase motor delivers consistent performance, making it suitable for homes and farms where a steady water supply is essential. Its robust design allows it to handle continuous operation, while its high efficiency ensures reliable discharge with lower power consumption. Constructed with quality materials for long-lasting durability, the Tesmo Openwell Submersible Pump is resistant to rust, wear, and tear, even under extended use. Its compact design makes it easy to install and maintain, while the water-cooled motor ensures efficient operation without overheating. Perfect for supplying water to overhead tanks, irrigation in small fields, and general domestic usage, this pump combines strength, efficiency, and convenience, making it a dependable choice for everyday water management needs.

Phase : Single Phase

Type of Product : Horizontal Openwell Submersible Pump

Voltage : 240 V

Body Material : Cast Iron

Outlet size : -

Explore other Variants (4)

Ships within 7 days

Havells Single Phase Sewage Submersible Pump

By Havells

₹12,979 - ₹28,319

You save ₹6,880!

24.47% OFF

The Havells Single Phase Sewage Submersible Pump is a reliable and efficient solution for handling sewage and wastewater in various residential and commercial applications. With its submersible design, this pump can be placed directly into sewage pits or tanks, eliminating the need for priming and ensuring efficient operation. Equipped with a powerful single-phase motor, this pump provides consistent and reliable performance, even in demanding conditions. It is designed to effectively handle the challenges of pumping sewage and effluent, making it suitable for use in basements, septic systems, and sewage treatment plants. The Havells Single Phase Sewage Submersible Pump features durable construction and corrosion-resistant materials, ensuring long-term reliability and minimal maintenance requirements. It also includes safety features such as thermal overload protection to prevent motor damage due to overheating. Whether you need to manage sewage in a residential building, commercial facility, or industrial setting, the Havells Single Phase Sewage Submersible Pump offers efficient and dependable pumping solutions to keep your environment clean and sanitary.

Phase : Single Phase

Type of Product : Sewage Submersible Pump

Voltage : 220 V

Application : Sewage submersible pumps suitable for transfer dirty muddy water as well as pumping screened sewage water containing small suspended soft solids

Winding type : Dual Coated Copper Winding

Impeller : Cast iron

Cable Length : 5 m

Solid Handling Capacity : Upto 35 mm

Shaft : Stainless Steel (SS-410)

Motor Type : Air Cooled

Rated Frequency : 50 Hz

Rotating Direction : Anti-clockwise when viewed from driving end

Suitable For : Single Phase supply

Motor Stator : High grade CRNO stampings

Motor Speed : 2900 RPM

Pump Casing : Cast iron

Motor Body : Stainless steel

Operating Temperature : 35 °C

Explore other Variants (4)

Ships within 15 days

Total Tools TWP7150026 2 HP Sewage Submersible Pump

By Total

₹25,900  

The sewage pump is a specialized pump that is used to lift sewerage water out of the ground. The sewage pump usually sits at the base of a manhole cover and is connected to a discharge pipe that empties into a nearby stream or body of water. The sewage pump may be powered by electricity or diesel fuel, depending on where it is located. There are many different types of sewage pumps, but they all have one thing in common: they're designed to remove waste from your home and dispose of it safely. Sewage pumps are used for the pumping of sewage from septic tanks and cesspits, as well as storm water drains. The design of sewage pumps is very specific to their purpose. They need to pump a liquid with a high concentration of solid particles, without being damaged themselves. Sewage pumps have a large tank and a large impeller that is designed to move the liquid at high speed. These components can be separated into two parts so that the impeller can be removed for cleaning, maintenance and replacement purposes. The impeller is usually made from stainless steel or cast iron so it can withstand the corrosive nature of sewage. It also needs to be strong enough to cope with the weight of solids that can clog up the pump if they are not removed regularly. A sewage pump is a device used to mechanically move sewage from one place to another. Sewage pumps typically use electric or gas motors and are designed to handle solid waste and sludge.

Add to Cart Buy Now

Related Searches

2 hp openwell submersible pump single phase

2 hp openwell submersible pump

l&t pumps control panel

openwell submersible pump 2 hp single phase

waaree borewell submersible pumps

Ships within 4 days

CG Single Phase Sewage Submersible Pump CGSTP Series

By CG

₹10,619 - ₹25,959

You save ₹4,515!

16.76% OFF

CG Single Phase Sewage Submersible Pump CGSTP Series is a powerful and efficient solution designed for pumping sewage and wastewater in residential and light commercial applications. With its robust construction, powerful motor, and cutting-edge features, this submersible pump ensures reliable performance and effective wastewater management. Equipped with a horsepower motor and copper wiring, the pump delivers efficient power delivery and reliable operation, even in challenging sewage pumping applications. Its single-phase design simplifies installation and operation, making it suitable for residential settings where three-phase power may not be readily available.

Phase : Single Phase

Type of Product : Sewage Submersible Pump

Series : CGSTP

Explore other Variants (6)

Ships within 7 days

Havells Three Phase Sewage Submersible Pump

By Havells

₹16,519 - ₹24,779

You save ₹6,745!

25.16% OFF

The Havells Three Phase Sewage Submersible Pump is a high-performance pump designed for efficiently managing sewage and wastewater in residential, commercial, and industrial settings. With its robust construction and powerful motor, this pump can handle the challenges of pumping sewage and effluent from underground pits or tanks. Equipped with a submersible design, this pump can be submerged directly into the sewage or wastewater, allowing for efficient and reliable operation without the need for priming. The three-phase motor ensures smooth and consistent pumping, even in demanding conditions. Featuring durable materials and corrosion-resistant components, the Havells Sewage Submersible Pump is built to withstand harsh environments and provide long-lasting performance. Its advanced design also includes features such as thermal overload protection and automatic operation for added convenience and safety. Whether you need to manage sewage in a residential basement, commercial building, or industrial facility, the Havells Three Phase Sewage Submersible Pump offers efficient and reliable pumping solutions to keep your premises clean and hygienic.

Phase : Three Phase

Type of Product : Sewage Submersible Pump

Voltage : 415 V

Application : Sewage submersible pumps suitable for transfer dirty muddy water as well as pumping screened sewage water containing small suspended soft solids

Winding type : Dual Coated Copper Winding

Impeller : Cast iron

Cable Length : 5 m

Solid Handling Capacity : Upto 35 mm

Shaft : Stainless Steel (SS-410)

Motor Type : Air Cooled

Rated Frequency : 50 Hz

Rotating Direction : Anti-clockwise when viewed from driving end

Suitable For : Three phase supply

Motor Stator : High grade CRNO stampings

Motor Speed : 2900 RPM

Pump Casing : Cast iron

Motor Body : Stainless steel

Operating Temperature : 35 °C

Explore other Variants (3)

Ships within 3 days

CG CGSV-A1A Single Phase Bore Size 100 mm Vertical Water Filled Submersible Pump Set

By CG

₹14,159 - ₹17,699

You save ₹8,361!

32.08% OFF

"CG CGSV-A1A Single Phase Bore Size 100 mm Vertical Water Filled Submersible Pump Set is a reliable and high-performance submersible pump designed to deliver efficient water lifting solutions for domestic, agricultural, and industrial applications. Built with durable materials, it ensures long-lasting performance even under tough conditions. The pump features precision-engineered components that provide optimal hydraulic efficiency, resulting in high discharge rates and consistent water flow. Its compact design allows easy installation in bore wells and ensures silent operation with minimal maintenance needs. This model is ideal for irrigation, water supply systems, and construction sites where consistent water pressure is essential.
Crafted with advanced engineering, CG CGSV-A1A Single Phase Bore Size 100 mm Vertical Water Filled Submersible Pump Set combines strength, efficiency, and reliability to offer maximum output at minimal energy consumption. The motor is designed for superior cooling and low power usage, enhancing both durability and performance. The high-grade impeller and stainless-steel shaft ensure smooth water delivery, while corrosion-resistant components increase its lifespan. Whether used for household water systems or heavy-duty agricultural pumping, this model guarantees dependable operation and cost-effectiveness. It meets modern pumping requirements, making it a trusted choice for users seeking performance, quality, and long-term value in water management solutions."

Type of Product : Vertical Submersible Pump Set

Series : CGSV-A1A

Phase : Single Phase

Flow Rate : 20-115 LPM

Bore Size : 100 mm

Explore other Variants (4)

Ships within 30 days

Btali BT 31.5 SSP 2 HP Sewage Submersible Pump

By Btali

₹44,839  

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420

By Ultron

₹22,419  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222

By Ultron

₹22,419  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135

By Ultron

₹24,779  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420

By Ultron

₹22,419  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 20 Stage UMD - 420 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225

By Ultron

₹23,599  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712

By Ultron

₹21,239  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515

By Ultron

₹21,239  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222

By Ultron

₹22,419  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 22 Stage UMD - 222 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225

By Ultron

₹23,599  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 25 Stage UMD - 225 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 30 Stage UMD - 130

By Ultron

₹23,599  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 30 Stage UMD - 130 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132

By Ultron

₹23,599  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135

By Ultron

₹24,779  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 35 Stage UMD - 135 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128

By Ultron

₹21,239  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010

By Ultron

₹21,239  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712

By Ultron

₹21,239  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 12 Stage UMD - 712 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515

By Ultron

₹21,239  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 15 Stage UMD - 515 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 30 Stage UMD - 130

By Ultron

₹23,599  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 30 Stage UMD - 130 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132

By Ultron

₹23,599  

Ultron Single Phase V4 Standard 2HP Submersible Pump Sets 32 Stage UMD - 132 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128

By Ultron

₹21,239  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 8 Stage UMD - 128 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 11 days

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010

By Ultron

₹21,239  

Ultron Three Phase V4 Standard 2HP Submersible Pump Sets 10 Stage UMD - 1010 The Ultron V4 Standard Submersible Pump Sets are designed for high water pressure applications. These pumps can be used in water supply, municipal, agricultural and industrial applications. The pump sets are constructed from cast iron, cast steel or stainless steel. Each set has been designed with a variety of motors depending on the application requirements. The standard submersible pumps can be used with a variety of different voltages including 24VAC/DC motors, 110VAC/60HZ motors or 220VAC/50HZ motors.
The pump sets have been designed with easy installation features to make them easier to install in any type of location.
Ultron V4 is a premium quality, submersible pump set with all the features to perform efficiently and effectively. It has a strong motor that pumps at low voltage for longer life. The pump comes with an impeller and casing made of stainless steel. The moving parts are lubricated with high-quality oil, which makes it maintenance free. Ultron V4 has a ceramic shaft that ensures wear-and-tear resistance and superior performance.
Ultron V4 is designed with a small footprint to fit in tight spaces. It can be installed vertically, horizontally or even at an angle to fit in small spaces. Ultron V4 also comes with an overload protection feature that activates when the pump is overloaded and stops its operation until it cools down again.

Add to Cart Buy Now

Ships within 5 days

CG Single Phase Domestic Open Well Pump CGDOW Series

By CG

₹7,669 - ₹24,779

You save ₹6,521!

20.83% OFF

CG Single Phase Domestic Open Well Pump CGDOW Series is a robust and high-performance open-well pump designed for efficient water supply in residential and light commercial applications. With its powerful motor and durable construction, this pump is ideal for drawing water from open wells or boreholes for various domestic and agricultural purposes. Featuring a sturdy copper wiring construction, the pump ensures efficient power delivery and reliable performance. Its design simplifies installation and operation, making it suitable for use in residential settings where three-phase power may not be readily available.

Phase : Single Phase

Type of Product : Horizontal Openwell Submersible Pump

Explore other Variants (13)

Ships within 7 days

Omt Arsh V- Series Sewage Submersible Pump

By OMT ARSH

₹9,321 - ₹25,959

The Omt Arsh V-Series Sewage Submersible Pump stands as a robust and efficient solution for handling wastewater and sewage in various industrial and municipal settings. Crafted with precision engineering and innovative design, this pump delivers unparalleled performance, reliability, and durability in the most demanding environments.
At its core, the V-Series pump features a powerful submersible motor designed to withstand the rigors of continuous operation underwater. This motor ensures efficient pumping of sewage and wastewater, even in harsh conditions, providing a reliable solution for sewage systems, wastewater treatment plants, and industrial processes.
Versatility is a defining characteristic of the V-Series pump, with customizable configurations to suit different applications and installation requirements. Whether it's dewatering flooded areas, transferring sewage in municipal sewage systems, or handling effluent in industrial processes, this pump adapts seamlessly to diverse tasks with ease.

Phase : Single Phase

Type of Product : Sewage Submersible Pump Without Coupling

Solid Handling Capacity : Upto 35 mm

Suitable For : Rain Water & Waste Water

Suc x Del (mm) : 25x25 mm

Explore other Variants (6)

Ships within 30 days

Texmo Single Phase Borewell Submersible Pump

By Texmo

₹21,239 - ₹35,399

You save ₹1,110!

3.04% OFF

The Texmo Single Phase Borewell Submersible Pump is a reliable and efficient solution for extracting water from deep underground borewells. Specifically designed for submerged use, these pumps are tailored to meet the water pumping needs of residential, agricultural, and industrial applications.
Featuring a single-phase motor, Texmo's borewell submersible pumps are optimized for areas where three-phase power may not be readily available. This makes them suitable for a wide range of applications, including rural and remote locations where access to electricity may be limited.
Crafted with durability and performance in mind, Texmo's borewell submersible pumps are constructed from high-quality materials and engineered for efficient water extraction from deep wells. This ensures long-term reliability and efficient operation, even in challenging environments.

Type of Product : Submersible Pump

Delivery size (mm) : 32 mm

Suitable For : 100 mm and Above Bore Dia

Borewell Size : 4 Inch

Phase : Single Phase

Material : Metal

Installation Type : Vertical

Motor Body : Cast Iron

Explore other Variants (2)

Ships within 30 days

EKKI ER41HVR 2HP 30 Stage Single Phase Borewell Submersible Pump with Control Panel

By EKKI

₹35,399  

Features:- Borehole submersible pumps for 4" (100mm) deep wells with radial flow Impellers coupled with our high precision motors give splendid performance. Improvised diffuser design gives better discharge properties. The noryl and hydraulic materials prevent the impellers from clogging even after long stationary periods. Easy to dismantle, rewind and install. Compact and modular design. Applications : Agriculture Domestic Building Services Public Utilities

Add to Cart Buy Now

Ships within 24 hrs

Crompton Single Phase Sewage Submersible Pump, STPM Series

By Crompton

₹16,519 - ₹29,499

Crompton Single Phase Sewage Submersible Pump, STPM Series is a robust and efficient solution for managing sewage and wastewater in residential, commercial, and industrial settings. Designed with high-quality materials and advanced engineering, this pump ensures reliable performance and durability even in demanding conditions. Its single-phase motor is optimized for energy efficiency, reducing operational costs while providing powerful pumping action. The pump features a corrosion-resistant body and impeller, making it suitable for handling various types of sewage, including those with solid particles. Its submersible design allows for seamless operation below the water surface, ensuring continuous and efficient fluid transfer. Equipped with an automatic thermal overload protector, the pump is safeguarded against overheating, enhancing its longevity and operational safety. Installation and maintenance are straightforward, thanks to the pump's compact design and user-friendly features. The Crompton Single Phase Sewage Submersible Pump is ideal for applications such as sewage treatment plants, drainage systems, and septic tanks. Its high discharge capacity and reliable performance make it an excellent choice for efficient wastewater management. Overall, this pump combines durability, efficiency, and ease of use, providing a reliable solution for effectively handling sewage and wastewater in a variety of environments.

Phase : Single Phase

Type of Product : Sewage Submersible Pump

Frequency : 50 Hz

Explore other Variants (4)

Ships within 8 days

Cosmos 2 HP Submersible Dewatering Pump Three Phase - CDW22L

By Cosmos

₹64,899   ₹81,420

You save ₹16,521!

20.29% OFF

The Cosmos 2 HP Submersible Dewatering Pump Three Phase - CDW22L is a powerful and efficient device designed to remove water from flooded areas, construction sites, basements, and other spaces prone to water accumulation. With its submersible design, this pump offers convenience, reliability, and high-performance in dewatering applications. Crafted from durable materials such as stainless steel or cast iron, the Submersible Dewatering Pump is built to withstand harsh conditions and prolonged use. Its rugged construction ensures resistance to corrosion, abrasion, and damage, making it suitable for both residential and commercial use. The Submersible Dewatering Pump operates by being fully submerged in water, allowing it to efficiently pump out large volumes of water. It features a hermetically sealed motor that is protected from water and debris, ensuring safe and reliable operation even in submerged conditions. Equipped with a powerful impeller, the pump creates a strong suction force, pulling water into the unit and then expelling it through a discharge outlet. The impeller is designed to handle solids, preventing clogging and ensuring smooth operation even in the presence of debris or suspended particles. One of the key advantages of the Submersible Dewatering Pump is its versatility. It can be used in various dewatering applications, including draining flooded basements, excavations, swimming pools, and construction sites. It is also suitable for groundwater control and removing water from underground storage tanks. The Submersible Dewatering Pump is easy to install and operate. Simply submerge it into the water, ensuring the pump is fully immersed, and connect the discharge hose. The pump can be controlled manually or equipped with automatic switches for hassle-free operation and peace of mind. Furthermore, the Submersible Dewatering Pump is designed for portability and convenience. It is typically compact and lightweight, allowing for easy transportation and maneuverability in different locations. Some models may also feature handles or built-in carrying handles for added convenience.

Add to Cart Buy Now

Ships within 7 days

Crompton Horizontal Type Three Phase Openwell Submersible Pump

By Crompton

₹17,699 - ₹29,499

You save ₹6,963!

23.7% OFF

The Crompton Horizontal Type Three Phase Openwell Submersible Pump is a robust and efficient pumping solution designed for a wide range of agricultural, industrial, and domestic applications. Engineered with advanced technology, this pump delivers high performance and reliability even under demanding conditions. Its horizontal construction allows for easy installation and maintenance, making it a preferred choice for many users. Powered by a three-phase motor, this submersible pump ensures consistent and powerful water flow, ideal for irrigation, water supply systems, and dewatering applications. The openwell design eliminates the need for priming and reduces the risk of air locking, ensuring smooth and continuous operation. The pump's construction features high-grade stainless steel and cast iron components, offering excellent durability and resistance to corrosion and wear. The Crompton Horizontal Type Three Phase Openwell Submersible Pump is designed for energy efficiency, reducing operational costs while providing optimal performance. Its high-efficiency impeller and dynamically balanced rotating parts minimize vibration and noise, enhancing the longevity of the pump and providing a quieter operating environment. With user-friendly features such as easy-to-service components and reliable mechanical seals, this pump ensures minimal downtime and maintenance efforts. It is a dependable and cost-effective solution for various water pumping needs, offering consistent performance and long-lasting durability.

Phase : Three Phase

Type of Product : Horizontal Openwell Submersible Pump

Voltage : 415 V

Frequency : 50 HZ

Country of Origin : India

Installation Type : Horizontal

Explore other Variants (4)

Ships within 30 days

Btali BT1500SPF Single Phase 2 HP Sewage Submersible Pump

By Btali

₹23,599  

The Btali BT1500SPF Single Phase 2 HP Sewage Submersible Pump is a high-capacity, efficient solution designed to handle demanding sewage and wastewater pumping tasks. With its powerful 1500-watt motor, this submersible pump provides robust performance for a range of residential, commercial, and light industrial applications.**Key Features:**- **Powerful Motor:** The BT1500SPF is equipped with a 1500-watt single-phase motor, delivering substantial power to manage large volumes of sewage and wastewater. This high power output ensures efficient operation and reliable performance in demanding conditions.- **Submersible Design:** The pump is designed to operate while fully submerged in liquid, making it ideal for applications that involve pumping from sump pits, septic tanks, or other confined spaces. Its submersible nature allows for effective and unobtrusive operation.- **Durable Construction:** Built from high-quality, corrosion-resistant materials, the BT1500SPF is engineered to withstand the harsh conditions of sewage and wastewater environments. This durability ensures a long operational life and reduces the need for frequent maintenance.- **High Efficiency:** The pump is designed to deliver strong performance with minimal energy consumption. Its high efficiency translates into effective wastewater management while keeping operating costs lower.- **Easy Installation and Operation:** Featuring a compact and user-friendly design, the BT1500SPF is easy to install and operate. Its design allows for straightforward integration into existing systems, and it can be used in a variety of settings.- **Single Phase Operation:** Operating on a single-phase electrical supply, the BT1500SPF is compatible with standard residential and commercial power sources, making it accessible and convenient for a wide range of applications.**Applications:**The Btali BT1500SPF is well-suited for:- Sump pit drainage- Septic tank pumping and maintenance- Wastewater and sewage removal in residential and commercial properties- Light industrial sewage managementIn summary, the Btali BT1500SPF Single Phase 2 HP Sewage Submersible Pump offers powerful and reliable performance for effective wastewater and sewage management. Its high-capacity motor, durable construction, and ease of use make it a dependable choice for handling demanding pumping tasks across various applications.

Add to Cart Buy Now

Ships within 30 days

Btali BT1500SSPF Single Phase 2 HP Sewage Submersible Pump

By Btali

₹23,599  

The Btali BT1500SSPF Single Phase 2 HP Sewage Submersible Pump is a high-capacity and efficient solution designed to handle the demanding tasks of sewage and wastewater management. With its powerful 1500-watt motor, this submersible pump is ideal for residential, commercial, and light industrial applications that require reliable and effective wastewater removal.### **Key Features:**- **High-Power Motor:** The BT1500SSPF is equipped with a robust 1500-watt single-phase motor, providing substantial power for pumping large volumes of sewage and wastewater. This motor ensures reliable performance and efficient operation, even in challenging conditions.- **Submersible Operation:** Designed to function fully submerged, the pump is well-suited for applications such as sump pit drainage, septic tank emptying, and wastewater removal from confined spaces. Its submersible design allows it to operate effectively without requiring external support.- **Durable Construction:** Built with high-quality, corrosion-resistant materials, the BT1500SSPF is engineered to withstand the harsh environments typical of sewage and wastewater management. This durability ensures a long operational life and reduces the need for frequent maintenance.- **Efficient Performance:** The pump is designed for high efficiency, delivering strong performance while optimizing energy consumption. This efficient operation helps in managing wastewater effectively while keeping energy costs lower.- **User-Friendly Design:** Featuring a compact and practical design, the BT1500SSPF is easy to install and operate. Its user-friendly features allow for straightforward integration into existing systems and adaptable use in various settings.- **Single Phase Operation:** Operating on a single-phase electrical supply, the BT1500SSPF is compatible with standard residential and commercial power sources, making it a versatile choice for different applications.### **Applications:**The Btali BT1500SSPF is suitable for:- **Sump Pit Drainage:** Effectively pumps water from sump pits to prevent flooding and maintain proper drainage.- **Septic Tank Maintenance:** Ideal for emptying and managing septic tanks, ensuring efficient wastewater management.- **Wastewater Removal:** Handles large volumes of wastewater from residential and commercial properties.- **Light Industrial Use:** Suitable for managing sewage and wastewater in industrial environments with moderate demands.### **Summary:**The Btali BT1500SSPF Single Phase 2 HP Sewage Submersible Pump offers powerful and reliable performance for effective sewage and wastewater management. With its durable construction, efficient operation, and ease of use, it is a dependable choice for addressing various wastewater pumping needs in residential, commercial, and light industrial settings.

Add to Cart Buy Now

Flash Deal

Ships within 24 hrs

Crompton 100 mm Bore 32 mm Outlet Single Phase Water Filled Borewell Submersible Pump Set, 4W Series (Power: 2-5 HP)

By Crompton

₹17,699 - ₹49,559

You save ₹4,515!

20.32% OFF

Crompton 100 mm Bore 32 mm Outlet Single Phase Water Filled Borewell Submersible Pump Set, 4W Series (Power: 2-5 HP) is a high-performance solution designed for efficient water extraction in residential, agricultural, and industrial settings. Engineered to operate in borewells, this submersible pump set ensures a consistent and reliable water supply from deep water sources. This pump set features a robust construction with high-quality stainless steel components, offering excellent resistance to corrosion and wear. The water-filled motor is designed to provide superior cooling and lubrication, enhancing the pump's longevity and performance. The single-phase motor makes it suitable for areas with limited access to three-phase power, ensuring broader applicability. The Crompton Borewell Submersible Pump Set is known for its energy efficiency and high discharge rates, capable of delivering substantial volumes of water with minimal power consumption. Its advanced hydraulic design ensures optimal performance, even under varying voltage conditions. The pump is equipped with a built-in check valve to prevent backflow and protect the pump from water hammer effects. Easy to install and maintain, this pump set is ideal for applications such as irrigation, domestic water supply, and pressure boosting in high-rise buildings. With Crompton’s reputation for quality and durability, this submersible pump set is a reliable choice for efficient water management.

Type of Product : Borewell Submersible Pump Set

Product Sub Type : Water Filled Submersible Pump

Series : 4W Series

Voltage : 180-220 V

Frequency : 50 Hz

Bore Size : 100 mm

Outlet size : 32 mm

Explore other Variants (16)

Ships within 5 days

CG V4 A1F Bore Size 100 mm Single Phase Vertical Oil Filled Submersible Pump Set

By CG

₹10,619 - ₹15,339

You save ₹6,721!

30.47% OFF

"CG V4 A1F Bore Size 100 mm Single Phase Vertical Oil Filled Submersible Pump Set is a reliable and high-performance submersible pump designed to deliver efficient water lifting solutions for domestic, agricultural, and industrial applications. Built with durable materials, it ensures long-lasting performance even under tough conditions. The pump features precision-engineered components that provide optimal hydraulic efficiency, resulting in high discharge rates and consistent water flow. Its compact design allows easy installation in bore wells and ensures silent operation with minimal maintenance needs. This model is ideal for irrigation, water supply systems, and construction sites where consistent water pressure is essential.
Crafted with advanced engineering, CG V4 A1F Bore Size 100 mm Single Phase Vertical Oil Filled Submersible Pump Set combines strength, efficiency, and reliability to offer maximum output at minimal energy consumption. The motor is designed for superior cooling and low power usage, enhancing both durability and performance. The high-grade impeller and stainless-steel shaft ensure smooth water delivery, while corrosion-resistant components increase its lifespan. Whether used for household water systems or heavy-duty agricultural pumping, this model guarantees dependable operation and cost-effectiveness. It meets modern pumping requirements, making it a trusted choice for users seeking performance, quality, and long-term value in water management solutions."

Type of Product : Vertical Oil Filled Submersible Pump Set

Series : CGSV-A1F

Phase : Single Phase

Flow Rate : 20-100 LPM

Bore Size : 100 mm

Explore other Variants (6)

Ships within 10 days

HPL S1PV Single Phase Submersible Pump Controller, Starter With Contactor, O/l Relay, Ammeter

By HPL

₹5,545 - ₹10,265

The HPL S1PV Single Phase Submersible Pump Controller is designed to provide safe, efficient, and reliable control for submersible pump motors. Built with high-quality components, it includes a heavy-duty contactor for smooth motor operation and an inbuilt overload relay (O/L relay) that protects the motor against overcurrent and overheating. The integrated ammeter allows real-time monitoring of motor current, enabling quick detection of abnormal load conditions and helping extend pump life.

Phase : Single Phase

Type of Product : Submersible Pump Controller

Voltage : 220 V

Type : Starter With Contactor, O/l Relay, Ammeter

Series : S1PV

Frequency : 50 Hz

Explore other Variants (6)

Previous Next

Page 1 of 14 results