Dolphin 4 Flute Solid Carbide Flat Endmill Flute Length 10 mm, Overall Length 38 mm

The "Dolphin 4 Flute Solid Carbide Flat Endmill" with a flute length of 10 mm and an overall length of 38 mm has the following specifications: 1. **Material**: Solid Carbide - The end mill is made from solid carbide, known for its hardness, wear resistance, and ability to maintain sharp cutting edges. 2. **Number of Flutes**: 4 - This indicates that the end mill has four cutting edges or flutes. End mills with more flutes are often used for finishing operations or for achieving higher feed rates and smoother surface finishes. 3. **Flute Length**: 10 mm - The length of the cutting portion of the end mill, excluding the shank, is 10 mm. This dimension determines the maximum depth of cut and the reach of the tool. 4. **Overall Length**: 38 mm - The total length of the end mill, including the cutting portion and the shank, is 38 mm. This dimension is important for tool clearance and determining the tool's reach within the machining setup. Overall, the Dolphin 4 Flute Solid Carbide Flat Endmill with a flute length of 10 mm and an overall length of 38 mm is suitable for applications requiring shorter reach and shallower cuts. Its solid carbide construction ensures durability and precision cutting performance, making it suitable for various milling tasks where precision and efficiency are required. The four flutes provide improved chip evacuation and can contribute to better surface finishes compared to end mills with fewer flutes.