As per Herman's policy
on orders above Rs. 1,000
Morse Taper drill sleeves are used as reduction or sizing up of Morse taper tooling. Often the designation is abbreviated as MT followed by a digit, for example a Morse taper number 4 would be MT4. The MT2 taper is the size most often found in drill presses up to 1⁄2" capacity. A Morse taper adapter gives one a “fast tool change system”. Morse tapers are an accepted standard that follows the International Organization for Standardization (ISO). Morse tapers are numbered from #0 to #7, with diameters from 0.35” (9 mm) to 3.4” (87 mm).
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.
|Type of Product||Drill Sleeve|
|Key Features||Made from 16mn CR5|
Ask for quote and we will call you back within 48 hours with best price available on this product