Use Non Sparking Tools Safely

5 Tips to Use Non Sparking Tools Safely

Posted by

What is Non-Sparking Tool?

Non sparking tools are safety tools that are used especially in environments that are vulnerable to accidents and hazards such as blasts and explosions. These explosions are often triggered in flammable environments by sparks that result from the use of traditional hand tools made of steel. The use of these types of hand tools causes friction which, in turn, may result in a spark or two; even a single spark is enough to trigger a heavy-duty explosion of devastating magnitude.
Other reasons that may trigger an explosion in such environments by giving off sparks are jobs that require equipment and material to be struck at with high impacts and accidental falling of steel made hand tools on hard, rigid surfaces. Industrial non-sparking tools are ingenious innovations in hand tools and have a non-ferrous composition.
This non-ferrous composition reduces manifold the risk of these tools sparking and igniting fires or resulting in explosions as a culmination. Nonsparking tools are mostly made of brass, bronze, or alloys of copper and nickel, copper and aluminum or copper, and beryllium.
These hand tools are comparatively softer than their regular steel made counterparts because of the non-ferrous nature of their composition; because of their softness, they have to be dealt with care so as to prevent them from being deformed by the exertion of more pressure than required.
Non-sparking tools are used in a wide range of industries for a variety of applications—from chemical industries, oil refineries, fuel pipelining sectors, and gas-related app to even aviation applications.

Safety Tips to Keep in Minds While Using the Non-Sparking Tools

Given below are safety tips for using non-sparking tools properly and keeping them in mint condition:-

#1)Maintaining cleanliness

These tools must be kept clear of any unwanted particle deposits and dust. A lot of times, residues get settled on the ends of the non-sparking tools; these deposits make the tools even more prone to producing sparks, triggering fires or explosions as a result.

#2)Overall maintenance

Non-sparking tools are fragile equipment because of their exceptionally high levels of softness in comparison with that of the steel hand tools. Thus it is important to use these tools lightly and maintain them from time to time.

#3)Cross ventilation

Dust is almost always present in places where the air is stagnant and does not get a passage to go in and out from. In the presence of dust, explosions in vulnerable environments are commonplace.

#4)Crucial checks

Monitoring the environment proactively from time to time is another thing that can ensure that a potentially hazardous situation hasn’t developed.

#5)User manual is the Bible

All devices come with a user manual. The best thing to do before using any equipment is to go through it thoroughly and act only as per that.

Final Note About The Use of Non-Sparking Tools

By following the safety tips mentioned above, you can very easily ensure that your non-sparking tools are good to use. Hand tools as critical as non-sparking tools must be bought from quality manufacturers. Compromising on the quality of non-sparking tools may cost you your life. Some of the best brands in the industrial supply business selling non-sparking tools of supreme quality are Taparia, Ambika, and NISU to name a few.

Loading

Leave a Reply

Your email address will not be published.